Texas Instruments

LM2902KPWR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

Teilenummer: LM2902KPWR ✓ Aktiv
26 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM2902KPWR Übersicht

The Texas Instruments LM2902KPWR is a quad general-purpose operational amplifier packaged in a 14-pin TSSOP. It contains four independent, high-gain, internally frequency-compensated amplifiers designed for single-supply operation over a 26 V maximum supply range, with a 1.2 MHz gain-bandwidth product and improved 2 kV ESD protection.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify differences between input signals. The LM2902 belongs to the general-purpose amplifier family, combining voltage amplification, buffering, filtering, and signal-conditioning functions in one package. Its four amplifiers make it useful where several independent analog channels are required without using four separate packages.

The LM2902KPWR provides a wide supply-voltage operating range, a 1.2 MHz gain-bandwidth product, and four amplifier circuits in one 14-pin TSSOP. The improved ESD rating of 2 kV is relevant in industrial and consumer equipment where handling transients or exposed connector inputs can affect an analog interface. The device is identified as a standard, general-purpose amplifier rather than a precision or low-noise amplifier.

Its internally compensated architecture simplifies closed-loop design because no external compensation network is required for typical voltage-feedback configurations. The 1.2 MHz bandwidth supports general-purpose signal amplification and moderate-frequency active filtering, while the wide supply range permits operation from conventional single supplies or higher industrial rails. Designers should still verify input and output common-mode limits, output swing, and stability against the final circuit topology.

Typical uses include sensor signal conditioning, industrial control loops, audio preamplification, low-frequency active filters, instrumentation interfaces, and general analog signal chains. Using four amplifiers in one package can also reduce PCB area and simplify design reviews compared with separate single-amplifier packages, although shared package limitations should be considered for applications requiring independent thermal or fault isolation.

For a new design, keep the TSSOP footprint and pin assignments of the LM2902KPWR unchanged, provide adequate input and output bypassing, and verify the selected bias point against the operating voltage and signal range. The manufacturer product page and datasheet are the appropriate references for ordering information, electrical limits, pin functions, and qualification details.

Drop-in-Alternativen für LM2902KPWR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM2902KPWR (gleiche Bauform und Footprint) – abweichend in Package, Amplifier Type, Operating Temperature Range, Gain-Bandwidth Product, Maximum Supply Voltage.

STMicroelectronics
Package: 14-TSSOP
Gain-Bandwidth Product: 1.3 MHz
Vergleichen mit LM2902KPWR →
Texas Instruments
Package: 14-pin SOIC (D), 3.90 mm width
Vergleichen mit LM2902KPWR →
Texas Instruments
Package: 14-pin TSSOP (PW)
Amplifier Type: Quad general-purpose operational amplifier
Operating Temperature Range: -40°C to 125°C
Vergleichen mit LM2902KPWR →
Texas Instruments
Package: 14-SOIC, 3.90 mm width
Amplifier Type: General purpose
Operating Temperature Range: -40 °C to +85 °C
Texas Instruments
Package: 8-pin TSSOP (PW)
Amplifier Type: Dual general-purpose operational amplifier
Operating Temperature Range: -40 °C to +85 °C
Vergleichen mit LM2902KPWR →

LM2902KD

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-pin TSSOP
4 circuits · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · 3 mV · 2 nA · 0.8 mA

Preis auf Anfrage

Datenblatt ansehen →

LM2902KVQPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-pin TSSOP
Quad general-purpose operational amplifier · 4 circuits · 30 V · 1.2 MHz · 2 kV · -40°C to 125°C · 14-pin TSSOP (PW) · 14 pins

Preis auf Anfrage

Datenblatt ansehen →

LM2902KPWR Grenzwerte & elektrische Eigenschaften

Number of Amplifiers 4 amplifiers
Amplifier Type General-purpose operational amplifier
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1.2 MHz
Improved ESD Protection 2 kV
Betriebstemperaturbereich -40 °C to +125 °C
Supply Type Single-supply operation
Compensation Internally frequency compensated
Gehäuse 14-pin TSSOP
Package Width 4.40 mm
Package Lead Width 0.173 inch
Montageart Surface mount
Circuit Count 4 circuits
Kategorie Instrumentation, operational amplifiers, buffer amplifiers

LM2902KPWR 0.173 inch Pinbelegungsleitfaden

Pinbelegung für LM2902KPWR (0.173 inch-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM2902KPWR im 0.173 inch-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM2902KPWR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM2902KPWR ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Audio Preamplification, Active Low-Frequency Filtering, Instrumentation Buffering, Control Loop Amplification, General-Purpose Interface Circuit.

🏭

Industrial Sensor Signal Conditioning

The LM2902KPWR is suitable for conditioning low-frequency sensor signals because it provides four general-purpose amplifier channels, a 1.2 MHz gain-bandwidth product, and single-supply operation with a 26 V maximum supply voltage. A typical channel can amplify a transducer output and buffer it into an analog-to-digital converter input. Internal frequency compensation keeps the voltage-feedback configuration simple, although the designer must verify the sensor’s common-mode range against the amplifier input limits and keep the layout away from switching nodes. Its 14-pin TSSOP package also reduces board area when several sensor channels require independent amplification.

🎧

Audio Preamplification

The LM2902KPWR can provide four independent general-purpose amplifier stages for low-frequency audio preamplification, active volume-control paths, or line-level buffering. The 1.2 MHz gain-bandwidth product is adequate for many general-purpose audio stages, while internal frequency compensation supports conventional non-inverting and inverting voltage-feedback configurations. Because it is not specified as a low-noise audio amplifier, the actual noise and distortion should be checked against the signal budget. The TSSOP-14 package helps reduce footprint compared with four separate single amplifiers, but grounding and output-drive considerations remain important.

⚡

Active Low-Frequency Filtering

The LM2902KPWR’s four independently usable amplifiers make it practical to implement active filters in instrumentation and control circuits. A practical application could combine buffered inputs, low-pass stages, and an output driver without requiring separate amplifier packages. The 1.2 MHz gain-bandwidth product provides useful bandwidth for low- and moderate-frequency filtering, and internal frequency compensation simplifies many voltage-feedback designs. Filter component tolerances and amplifier gain accuracy should be considered together. Use short feedback paths, stable reference grounding, and supply bypassing close to the device to reduce oscillation risk and improve repeatability.

🔧

Instrumentation Buffering

The LM2902KPWR can buffer instrumentation signals that must be referenced to a single supply. Four amplifier channels allow a design to combine input buffering, gain stages, and output isolation within one 14-pin TSSOP. The 26 V maximum supply rating supports circuits operating from a higher single rail, while the 1.2 MHz bandwidth covers many low-frequency measurement paths. The device should not automatically be treated as a dedicated precision instrumentation amplifier: input offset voltage, bias current, common-mode range, and output swing must meet the measurement error budget. Consider guarding sensitive input traces and avoiding capacitive loading on outputs.

🏭

Control Loop Amplification

The LM2902KPWR is applicable to low-frequency industrial control loops where error signals require amplification before driving an ADC, comparator, or downstream actuator interface. Its four amplifier channels can support feedback conditioning, summing, and signal isolation without using four separate packages. The 1.2 MHz gain-bandwidth product is generally more than adequate for slow control loops, and the wide single-supply range simplifies some industrial power architectures. Loop stability, output saturation, and input common-mode behavior must be checked across supply and load conditions. A solid reference ground and short feedback routes are essential.

🖥️

General-Purpose Interface Circuit

The LM2902KPWR can serve as a compact interface-building block for logic-level, test-point, and analog-control circuits. Its four general-purpose amplifiers can provide comparators with external hysteresis, level conditioning, cross-coupling, or buffered test outputs. A 1.2 MHz gain-bandwidth product supports signal shaping beyond static comparators, while the 14-pin TSSOP package helps limit board area. Operation from one supply simplifies the power tree, but every amplifier must remain within its input and output common-mode limits. Use local supply bypassing and reserve adequate copper around the package for repeatable high-frequency behavior.

What is the operating voltage of LM2902KPWR?
The LM2902KPWR operates from a single supply with a maximum listed supply voltage of 26 V. According to the Texas Instruments LM2902K product information, the device is a quad, 26-V operational amplifier family member designed for general-purpose analog signal processing. The exact minimum supply, input common-mode range, and output swing should be confirmed from the LM2902KPWR manufacturer datasheet before selecting the bias point.
What are the key specifications of LM2902KPWR that engineers should know?
The LM2902KPWR is a four-circuit general-purpose operational amplifier in a 14-pin TSSOP, with a 26 V maximum supply voltage, 1.2 MHz gain-bandwidth product, improved 2 kV ESD protection, and an operating range of -40 °C to +125 °C for the LM2902K family described by Texas Instruments. Its internally frequency-compensated architecture simplifies typical voltage-feedback designs.
Where to download LM2902KPWR datasheet PDF?
Download the official Texas Instruments LM2902KPWR documentation from the manufacturer’s LM2902K product page at https://www.ti.com/product/LM2902K, which links to the family datasheet and ordering information. The LM2902KPWR datasheet PDF identifies the part as a quad general-purpose amplifier in a 14-pin TSSOP and should be used as the controlling reference for pin functions and electrical limits.
Where can I find the LM2902KPWR pinout?
The LM2902KPWR pinout is defined in the pin-configuration section of the Texas Instruments LM2902K datasheet. The device uses a 14-pin TSSOP with four complete operational-amplifier channels. Use the manufacturer pin-description table when assigning PCB nets, because amplifier inputs, outputs, supply rails, and any exposed thermal-pad information must follow the exact package drawing.
What is the price of LM2902KPWR?
Current pricing and availability for LM2902KPWR are handled through the XAIPART Request a Quote form on this page. The form supports direct inquiry for the exact Texas Instruments MPN and any required packaging or production quantities. Use the structured product listing for updated commercial information rather than relying on a historical catalog figure.
Where to buy LM2902KPWR online?
The LM2902KPWR can be requested through the XAIPART Request a Quote form on this page. Specify the exact MPN, desired packaging format, quantity, and target date so the order can be prepared for the appropriate supply channel. The product is a Texas Instruments 14-pin TSSOP quad operational amplifier and should not be confused with LM2902 variants offered in other packages.
What is the lead time for LM2902KPWR?
Use the XAIPART Request a Quote form on this page to request the current lead time for LM2902KPWR. Lead time depends on the exact ordering suffix, quantity, and supply conditions, so a production-planning quantity and required delivery date should be included in the request. The manufacturer product page remains the reference for lifecycle and ordering information.
Is LM2902KPWR in stock?
Current LM2902KPWR stock status should be confirmed through the XAIPART Request a Quote form on this page. A distributor search result indicates that the part is available, but availability can change with order quantity and purchasing date. Provide the required quantity, package suffix, and production schedule to obtain a current allocation response.
Is LM2902KPWR suitable for sensor signal conditioning?
Yes, the LM2902KPWR is suitable for many low-frequency sensor signal-conditioning circuits because it combines four general-purpose amplifiers, a 1.2 MHz gain-bandwidth product, and single-supply operation within a 26 V maximum supply rating. Its internal compensation supports straightforward closed-loop use, but sensor output range, offset, noise, and common-mode requirements must still be checked against the final signal path.
LM2902KPWR vs LM324ADR - which is better for a general-purpose amplifier design?
The LM2902KPWR is the better footprint match when the PCB requires a 14-pin TSSOP quad amplifier, while LM324ADR is a 14-pin SOIC part and therefore cannot replace it without changing the land pattern. Electrically, both families are general-purpose quad operational amplifiers, so the decision should emphasize supply voltage, common-mode range, offset, bandwidth, and the exact pinout rather than the amplifier count.
When should I choose LM2902KPWR over another quad general-purpose op amp?
Choose LM2902KPWR when the design requires a 14-pin TSSOP footprint, four general-purpose amplifier channels, a 26 V maximum supply rating, and approximately 1.2 MHz bandwidth. It is particularly suitable for space-constrained low-frequency analog circuits. Select a different device when the design needs lower offset, lower noise, rail-to-rail input or output, greater bandwidth, or a package other than TSSOP-14.
What is the best drop-in replacement for LM2902KPWR?
A true drop-in replacement must use the same 14-pin TSSOP footprint, preserve the LM2902KPWR pin assignments, and meet the required supply-voltage, common-mode, output-swing, bandwidth, and temperature limits. The available cross-reference information identifies the broader LM2902 family but does not establish enough pin-compatible replacement MPNs to name one confidently. Use the Request a Quote form for sourcing support and verify any proposed substitute against the manufacturer datasheet.
Can another LM2902 variant replace LM2902KPWR?
Another LM2902 variant can replace LM2902KPWR only when its package and pinout are identical and its electrical limits satisfy the design. The suffix PW denotes the 14-pin TSSOP ordering option, while other LM2902 suffixes may use different packages. Confirm the package drawing, pin configuration, supply range, temperature rating, and lifecycle status before treating a variant as a drop-in replacement.
What is the best cross-brand equivalent for LM2902KPWR?
The best cross-brand equivalent must be a pin-compatible quad operational amplifier in a 14-pin TSSOP with compatible electrical limits, rather than merely a part marketed as an LM2902 equivalent. Cross-reference material confirms that LM2902-family products exist from multiple manufacturers, but the cited descriptions reference SOP-14 packaging and do not establish a TSSOP-14, pin-to-pin replacement. The final substitution must therefore be checked against package drawings and full electrical specifications.
What design considerations matter for LM2902KPWR?
Confirm input common-mode range, output swing, supply voltage, and channel stability in the manufacturer datasheet before finalizing a circuit. Decouple each supply connection close to the device, keep sensitive input and output routes away from switching nodes, and account for input offset and bias current when working with high-impedance sensors. The four internal amplifiers share one package but are electrically independent amplifier channels.
Is LM2902KPWR compliant with RoHS and REACH?
The RoHS and REACH status of LM2902KPWR must be confirmed from the current Texas Instruments product and material-compliance documentation for the exact ordering suffix. The available product information identifies the device as a Texas Instruments quad general-purpose operational amplifier but does not state those compliance conclusions. Do not assume qualification solely from the family name or package description.

Technische Referenzdaten für LM2902KPWR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM2902KPWR when the PCB is designed for a 14-pin TSSOP and the circuit needs four general-purpose operational amplifiers operating from a single supply. Its 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, internal compensation, and improved 2 kV ESD protection make it suitable for industrial sensing, control, buffering, and low-frequency active-filter applications. Choose a precision or low-noise amplifier when offset, drift, input bias current, or noise dominate the error budget. Choose a rail-to-rail device when the signal can approach either supply rail. Choose LM324ADR only when the PCB footprint can change to SOIC-14, since it is not package-compatible with LM2902KPWR. LM2902K and LM2902KV are family alternatives, but their ordering suffixes, package drawings, temperature grades, and electrical limits must be checked before substituting either part on an existing LM2902KPWR board.

Vergleich mit Alternativen

Parameter Dieses Produkt LM2902K LM2902KV
Package 14-pin TSSOP 14-pin TSSOP ordering option; confirm suffix 14-pin TSSOP ordering option; confirm suffix
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Count 4 4 4
Product Type General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz
Improved ESD Protection 2 kV 2 kV 2 kV
Operating Temperature -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C
Compensation Internally frequency compensated Internally frequency compensated Internally frequency compensated
Mounting Type Surface mount Surface mount Surface mount

Wichtigste Unterscheidungsmerkmale

  • Four independent amplifier channels in a compact TSSOP package (vs. LM324ADR)
  • General-purpose single-supply operation with a 26 V maximum rating (vs. LM2902K)
  • Improved ESD protection for general-purpose analog interfaces (vs. LM2902KV)

Designhinweise

Place the supply bypass capacitor as close as practical to the device power pins and connect it to a low-impedance ground plane. The LM2902KPWR can operate from a single supply up to the listed 26 V maximum, but the selected rail must also satisfy the input common-mode and output swing limits. Keep high-current return paths away from the sensitive input and feedback nodes.

Preserve the 14-pin TSSOP footprint and follow the manufacturer land pattern when making a drop-in replacement. Route each output directly to its destination, keep feedback traces short, and avoid connecting input and output traces in parallel. A ground-plane connection near the package helps reduce parasitic inductance, while careful via placement can improve stability around the TSSOP leads.

Do not assume that any LM2902 suffix is electrically or mechanically interchangeable with LM2902KPWR. Check the package drawing, pin configuration, supply-voltage rating, temperature grade, input common-mode range, and output swing. A functional-family equivalent with a different package is not a drop-in replacement and requires PCB changes.

For sensor and instrumentation circuits, evaluate source impedance and input-bias-current effects as well as offset voltage. Keep sensitive input traces short, use a quiet ground reference, and avoid routing them near high-impedance nodes or switching converters. If capacitive loading is present at an output, verify stability using the manufacturer’s guidance rather than adding arbitrary capacitance.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product information identifies LM2902K as a general-purpose operational amplifier family, but it does not provide exact compliance conclusions for LM2902KPWR. Check the exact ordering suffix in Texas Instruments material and quality documentation.

Ähnliche Suchanfragen

LM2902KPWR datasheet LM2902KPWR datasheet pdf LM2902KPWR pinout LM2902KPWR TSSOP-14 LM2902KPWR 26V 1.2MHz Texas Instruments LM2902KPWR LM2902KPWR equivalent LM2902KPWR replacement LM2902KPWR drop-in replacement LM2902KPWR footprint LM2902KPWR application circuit LM2902KPWR price

Verwandte Bauteile & Begriffe

Texas Instruments LM2902KPWR LM2902K LM2902KV LM324ADR quad operational amplifier general-purpose amplifier voltage-feedback amplifier analog integrated circuit signal conditioning active filter single-supply operation gain-bandwidth product 1.2 MHz 26 V 2 kV ESD protection internal frequency compensation 14-pin TSSOP TSSOP package family surface-mount technology industrial control sensor signal conditioning audio preamplification Texas Instruments LM2902K product family
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen