LM2903AQTH-13 - 36V Dual Automotive Comparator | Diodes Incorporated
Teilenummer: LM2903AQTH-13 ✓ AktivLM2903AQTH-13 Übersicht
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The LM2903AQ family belongs to the broader comparator hierarchy, which includes differential comparators, analog interface ICs, and general-purpose semiconductor components. Its differential inputs and open-collector outputs are useful for threshold detection, sensor conditioning, overvoltage monitoring, and control systems.
The LM2903AQTH-13 is specified as an automotive-compliant device in the LM2903Q/LM2903AQ family. The family is available in SO-8, MSOP-8, and TSSOP-8 packages for the dual comparator configuration and uses industry-standard pinouts. The A device has a 1 mV input offset-voltage specification, while the non-A device is specified at 2 mV. The input common-mode voltage range includes ground, and the differential input voltage range is equal to the power-supply voltage.
Open-collector outputs require an external pull-up resistor to establish the positive logic level. These outputs are compatible with TTL, MOS, and CMOS logic levels, and the low output saturation voltage is 200 mV at 4 mA for the LM2903 family. The dual architecture allows one device to implement two comparator functions, reducing board area compared with separate single comparators.
Typical applications include automotive battery and power-system monitoring, industrial control inputs, sensor threshold detection, overvoltage and undervoltage protection, and digital control systems. The TSSOP-8 package supports compact PCB layouts, while the broad supply-voltage capability supports systems operating from industrial rails. When using the device, account for input common-mode limits, output pull-up requirements, and the maximum differential input voltage when designing the surrounding analog front end.
Drop-in-Alternativen für LM2903AQTH-13 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LM2903AQTH-13 (gleiche Bauform und Footprint) – abweichend in Comparator Type, Package, Automotive Qualification, Input Offset Voltage, Output Type.
LM2903QTH-13
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →LM2903QTH
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LM2903Q2T
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →LM2903QTH-13
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →LM2903-Q1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LM2903AQTH-13 Grenzwerte & elektrische Eigenschaften
| Comparator Type | Dual differential voltage comparator |
| Number of Comparators | 2 |
| Supply Voltage Maximum | 36 V |
| Input Offset Voltage, A Grade | 1 mV |
| Input Offset Voltage, Non-A Grade | 2 mV |
| Input Common-Mode Voltage Range | Includes ground |
| Differential Input Voltage Range | Equal to the power-supply voltage |
| Low Output Saturation Voltage | 200 mV at 4 mA |
| Ausgangstyp | Open collector |
| Output Logic Compatibility | TTL, MOS, and CMOS compatible |
| Input Offset Voltage | 1 mV |
| Input Bias Current | 25 nA |
| Versorgungsstrom | 0.6 mA |
| Ruhestrom | 5 nA |
| Automotive Qualification | AEC-Q100 Grade 1 and automotive compliant |
| Gehäuse | 8-pin TSSOP |
| Montageart | Surface Mount |
| RoHS-Status | Fully RoHS Compliant |
| Lead-Free Status | Totally Lead-Free |
| Halogen and Antimony | Free |
LM2903AQTH-13 Pin-Konfiguration
| Pin 1 | OUT1 — Comparator 1 open-collector output |
| Pin 2 | IN1- — Comparator 1 inverting input |
| Pin 3 | IN1+ — Comparator 1 non-inverting input |
| Pin 4 | GND — Ground connection |
| Pin 5 | IN2+ — Comparator 2 non-inverting input |
| Pin 6 | IN2- — Comparator 2 inverting input |
| Pin 7 | OUT2 — Comparator 2 open-collector output |
| Pin 8 | VCC — Positive supply connection |
Typische Anwendungen
LM2903AQTH-13 ist geeignet für 6 Anwendungs: Automotive Battery Monitoring, Industrial Sensor Threshold Detection, Power-Supply Overvoltage Protection, Overvoltage and Undervoltage Detection, Digital Control-Signal Conditioning, Wired Thermocouple or Sensor Interface.
Automotive Battery Monitoring
The LM2903AQTH-13 is suitable for comparing a scaled battery voltage against a reference threshold in automotive electrical systems. Its 36 V maximum supply rating supports higher-voltage environments, while the 1 mV A-grade input offset specification improves comparison precision near the decision point. Two independent channels can monitor overvoltage and undervoltage conditions without requiring two separate comparator packages. The open-collector outputs can pull down wired-logic signals, but each output requires a pull-up resistor and careful selection for the vehicle electrical environment. Automotive qualification requirements should still be confirmed against the complete ordering documentation.
Empfohlen
Industrial Sensor Threshold Detection
Use the two comparator channels to detect when industrial sensor outputs cross upper and lower limits. The LM2903AQTH-13’s 1 mV input offset voltage helps minimize decision-point error when monitoring low-level analog signals, while the input common-mode range including ground supports sensors referenced to the negative supply. Place the input network close to the comparator pins, establish the reference with a stable source, and use the open-collector outputs for wired alarm or limit-status signals. The TSSOP-8 package reduces board footprint when multiple sensing channels must fit into compact industrial control electronics.
Empfohlen
Power-Supply Overvoltage Protection
The LM2903AQTH-13 can compare a divided supply rail with a reference to detect excessive voltage before downstream circuitry is exposed to an abnormal condition. Its 36 V maximum supply rating is appropriate for industrial power systems, and the 1 mV A-grade offset specification improves threshold resolution. Two channels allow separate upper and lower monitoring points. Because the outputs are open collector, choose pull-up values that balance fault-current capability with output rise time, and confirm that the sensed voltage stays within the comparator’s common-mode range. This configuration is preferable to placing the comparator directly across an unprotected high-voltage rail.
Empfohlen
Overvoltage and Undervoltage Detection
The two independent LM2903AQTH-13 channels can implement complementary overvoltage and undervoltage detection around a monitored rail. A precision reference establishes each threshold, while resistive attenuation brings the rail into the input common-mode range. The 1 mV A-grade offset specification reduces uncertainty at the switching point, and the open-collector outputs can drive fault indicators or interlock logic through suitable pull-ups. Check output timing, input protection, and resistor tolerances because comparator accuracy alone does not define the complete threshold accuracy. Automotive designs should use the automotive-qualified ordering option where required.
Empfohlen
Digital Control-Signal Conditioning
The LM2903AQTH-13 is useful for converting analog control or feedback signals into digital logic states. Its differential inputs support comparison of a feedback voltage against a command or reference level, and the open-collector output can directly sink current in a wired-logic system. The 1 mV offset specification is valuable when small signal differences determine control decisions. Add pull-up resistors to the intended logic supply, keep sensitive input traces away from switching nodes, and account for the propagation characteristics of the selected comparator version. Its dual-channel architecture allows two control decisions to share one compact TSSOP-8 package.
Empfohlen
Wired Thermocouple or Sensor Interface
The LM2903AQTH-13 can serve as a threshold detector for low-level sensor outputs, including resistive or thermocouple-derived signals, when the input remains within the device’s common-mode range. Its low 1 mV A-grade offset specification improves detection resolution, while the two channels permit separate rising and falling alarm points. Place the sensor input and reference network close to the device, protect inputs from transients, and avoid routing high-current paths adjacent to the sensitive pins. The open-collector outputs allow alarm signals to be pulled up to the system logic level, simplifying integration with monitoring and shutdown logic.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LM2903AQTH-13 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LM2903QTH-13 | LM2903QTH | LM2903Q | LM2903QTH-13 | LM2903-Q1 |
|---|---|---|---|---|---|---|
| Package | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 ordering option required |
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Texas Instruments |
| Comparator Configuration | Dual | Dual | Dual | Dual | Dual | Dual |
| Automotive Qualification | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 0 and 1 |
Wichtigste Unterscheidungsmerkmale
- Higher specified input offset accuracy (vs. LM2903QTH-13)
- Automotive-oriented dual-comparator family (vs. LM2903Q)
- Two independent channels in a compact package (vs. LM2903-Q1)
Designhinweise
Route the two differential input pairs as short, matched paths away from switching nodes and output return currents. Connect the device ground pin directly to the quiet ground plane, and place input protection or filtering components close to the relevant pins. The manufacturer identifies the LM2903Q/LM2903AQ family as using industry-standard pinouts, so preserving those assignments allows the same TSSOP-8 routing pattern to be reused during family substitution.
Do not omit the external pull-up resistors on OUT1 and OUT2. Open-collector outputs only pull the node low; without a pull-up, the logic state is undefined. Select the pull-up voltage from the receiving TTL, MOS, or CMOS system and calculate resistor value from the required sink current. The LM2903 family specifies 200 mV low-level saturation at 4 mA, so verify the pull-up current against that operating point.
Keep the supply connection short and decoupled close to pin 8 according to the manufacturer application guidance. The device has a 36 V maximum supply rating, but that rating is not a substitute for normal-operation derating or input transient protection. Automotive and industrial installations should include protection against reverse-battery, load-dump, and other transients appropriate to the installation before the signal reaches the comparator supply pin.
Check the input common-mode range before applying a signal. The LM2903 family includes ground in its common-mode range, but it is not a rail-to-rail comparator, and the differential input range equals the supply voltage. Use resistor attenuation when the compared signal can exceed those limits, and include clamp protection for exposed industrial or automotive inputs.
Compliance-Informationen
The Diodes Incorporated LM2903Q product information states that the family is Totally Lead-Free, Fully RoHS Compliant, and Halogen and Antimony Free. Family documentation states that the devices are qualified to AEC-Q100 Grade 1 and automotive compliant. REACH and conflict-minerals status were not identified.