Diodes Incorporated

LM2903AQTH-13 - 36V Dual Automotive Comparator | Diodes Incorporated

MPN: LM2903AQTH-13 ✓ Hoạt động
36 V Vdss 25 nA Id 8-pin TSSOP Package
MOQ: 1 |

LM2903AQTH-13 Tóm tắt

Diodes Incorporated LM2903AQTH-13 is a dual differential voltage comparator designed for general-purpose, automotive, and industrial signal-conditioning applications. The device provides two independent comparator channels, a 36 V maximum supply rating, 1 mV input offset voltage for the A-grade version, and an open-collector output architecture. It is packaged in an 8-pin TSSOP package, making it suitable for compact surface-mount designs where two independent comparison functions are required.

A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The LM2903AQ family belongs to the broader comparator hierarchy, which includes differential comparators, analog interface ICs, and general-purpose semiconductor components. Its differential inputs and open-collector outputs are useful for threshold detection, sensor conditioning, overvoltage monitoring, and control systems.

The LM2903AQTH-13 is specified as an automotive-compliant device in the LM2903Q/LM2903AQ family. The family is available in SO-8, MSOP-8, and TSSOP-8 packages for the dual comparator configuration and uses industry-standard pinouts. The A device has a 1 mV input offset-voltage specification, while the non-A device is specified at 2 mV. The input common-mode voltage range includes ground, and the differential input voltage range is equal to the power-supply voltage.

Open-collector outputs require an external pull-up resistor to establish the positive logic level. These outputs are compatible with TTL, MOS, and CMOS logic levels, and the low output saturation voltage is 200 mV at 4 mA for the LM2903 family. The dual architecture allows one device to implement two comparator functions, reducing board area compared with separate single comparators.

Typical applications include automotive battery and power-system monitoring, industrial control inputs, sensor threshold detection, overvoltage and undervoltage protection, and digital control systems. The TSSOP-8 package supports compact PCB layouts, while the broad supply-voltage capability supports systems operating from industrial rails. When using the device, account for input common-mode limits, output pull-up requirements, and the maximum differential input voltage when designing the surrounding analog front end.

Bộ thay thế dễ dàng lắp đặt cho LM2903AQTH-13 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2903AQTH-13 (cùng hình factor và footprint) — khác nhau ở Comparator Type, Package, Automotive Qualification, Input Offset Voltage, Output Type.

STMicroelectronics
Comparator Type: Dual, independent voltage comparator
Package: 8-DFN, 2 x 2 mm
Output Type: Open-collector
So sánh với LM2903AQTH-13 →
Diodes Incorporated
Comparator Type: Standard (General Purpose)
Package: 8-TSSOP
Automotive Qualification: AEC-Q100 Grade 1
So sánh với LM2903AQTH-13 →

LM2903QTH-13

✅ Drop-In
Diodes Incorporated
📦 TSSOP-8
Dual differential voltage comparator · 2 · Standard (General Purpose) · 36 V · 2 mV · 25 nA · 5 nA · 0.6 mA per channel

Liên hệ để biết giá

Xem tài liệu →

LM2903QTH

✅ Drop-In
📦 TSSOP-8
Same LM2903Q/LM2903AQ family and TSSOP-8 industry-standard pinout; packaging/order suffix differs, with no separately confirmed offset-value difference in the manufacturer data

📋 Tham chiếu thay thế (không có trong danh mục)

LM2903Q2T

✅ Drop-In
STMicroelectronics
📦 TSSOP-8
Dual, independent voltage comparator · Low-power dual voltage comparator · 2 · Single supply or split supply · Open-collector · Rail-to-rail · Standard general-purpose comparator

Liên hệ để biết giá

Xem tài liệu →

LM2903QTH-13

✅ Drop-In
Diodes Incorporated
📦 TSSOP-8
Dual differential voltage comparator · 2 · Standard (General Purpose) · 36 V · 2 mV · 25 nA · 5 nA · 0.6 mA per channel

Liên hệ để biết giá

Xem tài liệu →

LM2903-Q1

✅ Drop-In
📦 TSSOP-8
TI dual high-voltage differential comparator family with automotive qualification; exact ordering suffix and offset, supply-current, and timing differences require confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

LM2903AQTH-13 Tỷ lệ tối đa & tính chất điện

Comparator Type Dual differential voltage comparator
Number of Comparators 2
Supply Voltage Maximum 36 V
Input Offset Voltage, A Grade 1 mV
Input Offset Voltage, Non-A Grade 2 mV
Input Common-Mode Voltage Range Includes ground
Differential Input Voltage Range Equal to the power-supply voltage
Low Output Saturation Voltage 200 mV at 4 mA
Kiểu đầu ra Open collector
Output Logic Compatibility TTL, MOS, and CMOS compatible
Input Offset Voltage 1 mV
Input Bias Current 25 nA
Điện áp cung cấp 0.6 mA
Điện áp yên tĩnh 5 nA
Automotive Qualification AEC-Q100 Grade 1 and automotive compliant
Hộp 8-pin TSSOP
Kiểu lắp đặt Surface Mount
Trạng thái RoHS Fully RoHS Compliant
Lead-Free Status Totally Lead-Free
Halogen and Antimony Free

Cấu hình chân LM2903AQTH-13

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Chân 1 OUT1 — Comparator 1 open-collector output
Chân 2 IN1- — Comparator 1 inverting input
Chân 3 IN1+ — Comparator 1 non-inverting input
Chân 4 GND — Ground connection
Chân 5 IN2+ — Comparator 2 non-inverting input
Chân 6 IN2- — Comparator 2 inverting input
Chân 7 OUT2 — Comparator 2 open-collector output
Chân 8 VCC — Positive supply connection

Ứng dụng tiêu biểu

LM2903AQTH-13 phù hợp cho 6 Áp dụngs: Automotive Battery Monitoring, Industrial Sensor Threshold Detection, Power-Supply Overvoltage Protection, Overvoltage and Undervoltage Detection, Digital Control-Signal Conditioning, Wired Thermocouple or Sensor Interface.

🚗

Automotive Battery Monitoring

The LM2903AQTH-13 is suitable for comparing a scaled battery voltage against a reference threshold in automotive electrical systems. Its 36 V maximum supply rating supports higher-voltage environments, while the 1 mV A-grade input offset specification improves comparison precision near the decision point. Two independent channels can monitor overvoltage and undervoltage conditions without requiring two separate comparator packages. The open-collector outputs can pull down wired-logic signals, but each output requires a pull-up resistor and careful selection for the vehicle electrical environment. Automotive qualification requirements should still be confirmed against the complete ordering documentation.

🏭

Industrial Sensor Threshold Detection

Use the two comparator channels to detect when industrial sensor outputs cross upper and lower limits. The LM2903AQTH-13’s 1 mV input offset voltage helps minimize decision-point error when monitoring low-level analog signals, while the input common-mode range including ground supports sensors referenced to the negative supply. Place the input network close to the comparator pins, establish the reference with a stable source, and use the open-collector outputs for wired alarm or limit-status signals. The TSSOP-8 package reduces board footprint when multiple sensing channels must fit into compact industrial control electronics.

⚡

Power-Supply Overvoltage Protection

The LM2903AQTH-13 can compare a divided supply rail with a reference to detect excessive voltage before downstream circuitry is exposed to an abnormal condition. Its 36 V maximum supply rating is appropriate for industrial power systems, and the 1 mV A-grade offset specification improves threshold resolution. Two channels allow separate upper and lower monitoring points. Because the outputs are open collector, choose pull-up values that balance fault-current capability with output rise time, and confirm that the sensed voltage stays within the comparator’s common-mode range. This configuration is preferable to placing the comparator directly across an unprotected high-voltage rail.

🔧

Overvoltage and Undervoltage Detection

The two independent LM2903AQTH-13 channels can implement complementary overvoltage and undervoltage detection around a monitored rail. A precision reference establishes each threshold, while resistive attenuation brings the rail into the input common-mode range. The 1 mV A-grade offset specification reduces uncertainty at the switching point, and the open-collector outputs can drive fault indicators or interlock logic through suitable pull-ups. Check output timing, input protection, and resistor tolerances because comparator accuracy alone does not define the complete threshold accuracy. Automotive designs should use the automotive-qualified ordering option where required.

🖥️

Digital Control-Signal Conditioning

The LM2903AQTH-13 is useful for converting analog control or feedback signals into digital logic states. Its differential inputs support comparison of a feedback voltage against a command or reference level, and the open-collector output can directly sink current in a wired-logic system. The 1 mV offset specification is valuable when small signal differences determine control decisions. Add pull-up resistors to the intended logic supply, keep sensitive input traces away from switching nodes, and account for the propagation characteristics of the selected comparator version. Its dual-channel architecture allows two control decisions to share one compact TSSOP-8 package.

🌐

Wired Thermocouple or Sensor Interface

The LM2903AQTH-13 can serve as a threshold detector for low-level sensor outputs, including resistive or thermocouple-derived signals, when the input remains within the device’s common-mode range. Its low 1 mV A-grade offset specification improves detection resolution, while the two channels permit separate rising and falling alarm points. Place the sensor input and reference network close to the device, protect inputs from transients, and avoid routing high-current paths adjacent to the sensitive pins. The open-collector outputs allow alarm signals to be pulled up to the system logic level, simplifying integration with monitoring and shutdown logic.

Tóm tắt các sản phẩm được đề xuất

LM2903QTH-13 Diodes Incorporated Được sử dụng trong: Automotive Battery Monitoring, Industrial Sensor Threshold Detection, Power-Supply Overvoltage Protection, Overvoltage and Undervoltage Detection, Digital Control-Signal Conditioning, Wired Thermocouple or Sensor Interface LM2903-Q1 Automotive dual comparator family Được sử dụng trong: Automotive Battery Monitoring, Industrial Sensor Threshold Detection, Overvoltage and Undervoltage Detection, Wired Thermocouple or Sensor Interface LM2903Q Same-family dual comparator Được sử dụng trong: Power-Supply Overvoltage Protection, Digital Control-Signal Conditioning
What is the operating voltage of LM2903AQTH-13?
The LM2903AQTH-13 operates from a single supply with a maximum supply voltage of 36 V. According to the Diodes Incorporated LM2903Q/LM2903AQ datasheet, the input common-mode voltage range includes ground and the differential input voltage range is equal to the power-supply voltage. The device is therefore intended for conventional single-supply analog systems where the comparator inputs remain within the specified common-mode limits.
Is LM2903AQTH-13 a dual or quad comparator?
The LM2903AQTH-13 is a dual comparator containing two independent differential comparator channels. The LM2903Q/LM2903AQ family datasheet identifies the dual devices as LM2903Q and LM2903AQ, while the related LM2901Q/LM2901AQ devices are quad comparators. The two independent channels allow threshold detection or control functions to be implemented in one 8-pin TSSOP package.
What is the input offset voltage of LM2903AQTH-13?
The A-grade LM2903AQTH-13 has an input offset-voltage specification of 1 mV. The Diodes Incorporated LM2903 product information states that the non-A device is specified at 2 mV and the A device at 1 mV. Lower offset voltage is useful when the comparator decision point is close to the signal level or when input bias errors must remain small relative to the monitored threshold.
Where can I download the LM2903AQTH-13 datasheet PDF?
The manufacturer datasheet is available through the Diodes Incorporated LM2903Q download page and the LM2903 product page. The LM2903Q/LM2903AQ datasheet covers the LM2903QTH-13 and LM2903AQTH-13 dual comparator variants, including package, electrical characteristics, qualification information, and industry-standard pinout details. Use the manufacturer document for design verification and the latest revision information.
What is the LM2903AQTH-13 pinout?
The LM2903AQTH-13 uses the industry-standard 8-pin TSSOP pinout for the LM2903 dual comparator family. The conventional assignments are pin 1 OUT1, pin 2 IN1−, pin 3 IN1+, pin 4 GND, pin 5 IN2+, pin 6 IN2−, pin 7 OUT2, and pin 8 VCC. Confirm pin numbering against the manufacturer pin-description table when assigning PCB tracks, especially for dual-channel layouts.
Does LM2903AQTH-13 need pull-up resistors?
Yes, each LM2903AQTH-13 open-collector output requires an external pull-up resistor to establish the positive output voltage. The family is compatible with TTL, MOS, and CMOS logic levels, but the pull-up must connect to the logic supply used by the receiving circuit. The datasheet specifies a low output saturation voltage of 200 mV at 4 mA for the LM2903, so resistor selection should keep sink current within the output-current limits.
What applications are suitable for LM2903AQTH-13?
The LM2903AQTH-13 is suitable for automotive battery monitoring, industrial threshold detection, sensor signal conditioning, power-supply protection, and digital control-loop interfaces. Its 36 V maximum supply rating and input common-mode range including ground support higher-voltage systems, while the 1 mV A-grade offset specification improves decision accuracy. Each channel can compare a sensed voltage against a reference or another signal.
LM2903AQTH-13 vs LM2903QTH-13 - which is better?
The LM2903AQTH-13 is the A-grade version with a 1 mV input offset-voltage specification, while the LM2903QTH-13 is the non-A version with a 2 mV specification. Both belong to the dual LM2903 family and use the same 8-pin TSSOP family pinout. Choose the A-grade part when offset accuracy is more important than the non-A version’s looser specification; otherwise the Q variant may be adequate for a less demanding threshold.
When should I choose LM2903AQTH-13 over LM2903QTH-13?
Choose LM2903AQTH-13 when the comparator decision is sensitive to small input-voltage differences. The A-grade device is specified at 1 mV offset voltage versus 2 mV for the non-A LM2903QTH-13, a 1 mV or 50% reduction in the specified offset error. Both are dual open-collector comparators in the same TSSOP-8 package family, so the choice should follow the required accuracy and qualification rather than a different PCB footprint.
Can LM2903QTH-13 replace LM2903AQTH-13?
The LM2903QTH-13 can be used as a pin-compatible functional replacement in the same TSSOP-8 LM2903 family when the 2 mV non-A offset specification is acceptable. It is not an exact specification-for-specification substitute because the LM2903AQTH-13 has a 1 mV offset rating. Verify the required threshold accuracy, supply conditions, automotive qualification requirements, and output timing before approving the replacement.
What can replace LM2903AQTH-13?
The LM2903QTH-13 is the closest same-family drop-in candidate because it uses the same dual-comparator TSSOP-8 pinout and open-collector architecture, but its 2 mV offset specification is looser than the 1 mV A-grade target. The manufacturer family datasheet confirms that LM2903Q and LM2903AQ use industry-standard pinouts. A replacement should be approved only after checking input range, output current, supply voltage, qualification, and timing.
Is LM2903AQTH-13 suitable for automotive applications?
Yes, the LM2903Q/LM2903AQ family is identified as automotive compliant, and the family documentation states that the devices use green mold compound and are qualified to AEC-Q100 Grade 1. The LM2903AQTH-13 therefore belongs to an automotive-oriented variant family, subject to the complete ordering qualification and production documentation for the specific part number.
What is the best Texas Instruments equivalent for LM2903AQTH-13?
The TI LM2903-Q1 is the closest cross-brand automotive comparator family candidate identified for comparison, with the manufacturer describing it as an AEC-Q100 Grade 0 and 1 high-voltage dual differential comparator. Its exact TSSOP-8 ordering suffix must be selected and its pinout, supply limits, output type, and timing verified against LM2903AQTH-13 before treating it as a drop-in replacement.
How do I request a price or quote for LM2903AQTH-13?
Use the Request a Quote form on this product page for current commercial terms, availability, lot traceability, and lead time. The manufacturer family documentation identifies the LM2903Q/LM2903AQ as the relevant dual-comparator series, while current channel pricing and inventory should be confirmed through the quote workflow rather than relying on an outdated listing.
What is the lead time for LM2903AQTH-13?
Lead time and stock status should be requested through the Request a Quote form on this page. The verified manufacturer and distributor listings identify LM2903AQTH-13 as an LM2903-family 8-TSSOP comparator, but they do not establish a fixed production lead time or guaranteed allocation. A quotation can confirm current inventory, manufacturing status, and delivery expectations for the exact ordering code.
What are the key specifications of LM2903AQTH-13 that engineers should know?
The LM2903AQTH-13 is a dual, open-collector differential comparator with a 36 V maximum supply voltage, 1 mV A-grade input offset voltage, 25 nA input bias current, and 0.6 mA supply current. It is offered in an 8-pin TSSOP package. The Diodes Incorporated family documentation also identifies TTL, MOS, and CMOS output compatibility, RoHS compliance, and AEC-Q100 Grade 1 automotive qualification.

Dữ liệu tham khảo kỹ thuật cho LM2903AQTH-13 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose LM2903AQTH-13 when the design needs two independent comparator channels, a 36 V maximum supply rating, open-collector wired-logic outputs, and the tighter 1 mV A-grade offset specification. It is particularly appropriate for compact automotive and industrial threshold-detection boards where the TSSOP-8 footprint and automotive-family documentation support reuse of an established layout. Select LM2903QTH-13 or LM2903Q when the same package, supply capability, and output architecture are sufficient but the 2 mV non-A offset specification is acceptable. Use LM2903-Q1 only after selecting and validating the exact TSSOP-8 ordering suffix, because the TI family’s offset, timing, supply-current, and output details must be reconciled with the target. For any substitution, confirm the pinout, common-mode range, differential input limits, pull-up arrangement, automotive qualification, and output timing.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM2903QTH-13 LM2903QTH LM2903Q LM2903QTH-13 LM2903-Q1
Package TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8 ordering option required
Brand Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated Texas Instruments
Comparator Configuration Dual Dual Dual Dual Dual Dual
Automotive Qualification AEC-Q100 Grade 1 and automotive compliant AEC-Q100 Grade 1 and automotive compliant AEC-Q100 Grade 1 and automotive compliant AEC-Q100 Grade 1 and automotive compliant AEC-Q100 Grade 1 and automotive compliant AEC-Q100 Grade 0 and 1

Bảo phân biệt quan trọng

  • Higher specified input offset accuracy (vsLM2903QTH-13)
  • Automotive-oriented dual-comparator family (vsLM2903Q)
  • Two independent channels in a compact package (vsLM2903-Q1)

Ghi chú thiết kế

Route the two differential input pairs as short, matched paths away from switching nodes and output return currents. Connect the device ground pin directly to the quiet ground plane, and place input protection or filtering components close to the relevant pins. The manufacturer identifies the LM2903Q/LM2903AQ family as using industry-standard pinouts, so preserving those assignments allows the same TSSOP-8 routing pattern to be reused during family substitution.

Do not omit the external pull-up resistors on OUT1 and OUT2. Open-collector outputs only pull the node low; without a pull-up, the logic state is undefined. Select the pull-up voltage from the receiving TTL, MOS, or CMOS system and calculate resistor value from the required sink current. The LM2903 family specifies 200 mV low-level saturation at 4 mA, so verify the pull-up current against that operating point.

Keep the supply connection short and decoupled close to pin 8 according to the manufacturer application guidance. The device has a 36 V maximum supply rating, but that rating is not a substitute for normal-operation derating or input transient protection. Automotive and industrial installations should include protection against reverse-battery, load-dump, and other transients appropriate to the installation before the signal reaches the comparator supply pin.

Check the input common-mode range before applying a signal. The LM2903 family includes ground in its common-mode range, but it is not a rail-to-rail comparator, and the differential input range equals the supply voltage. Use resistor attenuation when the compared signal can exceed those limits, and include clamp protection for exposed industrial or automotive inputs.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Không chì
Yes
Không halogen
Yes
Khoáng vật xung đột
Unknown

The Diodes Incorporated LM2903Q product information states that the family is Totally Lead-Free, Fully RoHS Compliant, and Halogen and Antimony Free. Family documentation states that the devices are qualified to AEC-Q100 Grade 1 and automotive compliant. REACH and conflict-minerals status were not identified.

Tìm kiếm liên quan

LM2903AQTH-13 datasheet LM2903AQTH-13 pinout LM2903AQTH-13 datasheet pdf LM2903AQTH-13 equivalent LM2903AQTH-13 replacement LM2903AQTH-13 cross reference LM2903AQTH-13 footprint LM2903AQTH-13 price LM2903AQTH-13 stock Diodes Incorporated LM2903AQTH-13 LM2903AQTH-13 vs LM2903QTH-13 LM2903 TSSOP-8 pinout LM2903AQTH-13 automotive comparator 36V dual open collector comparator LM2903AQTH-13 application circuit

Các bộ phận và thuật ngữ liên quan

Diodes Incorporated LM2903AQTH-13 LM2903QTH-13 LM2903Q LM2903-Q1 Texas Instruments voltage comparator dual differential comparator analog comparator open-collector output input offset voltage input common-mode voltage range differential input voltage range TSSOP-8 TSSOP surface-mount package AEC-Q100 Grade 1 automotive qualification RoHS lead-free TTL MOS logic CMOS logic automotive battery monitoring industrial sensor threshold detection
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ