STMicroelectronics

LM2904YPT - Dual 1.1MHz Op Amp | STMicroelectronics

Teilenummer: LM2904YPT ✓ Aktiv
100 dB Vdss 8-TSSOP Package
MOQ: 1 |

LM2904YPT Übersicht

STMicroelectronics LM2904YPT is a low-power dual operational amplifier in an 8-TSSOP package, providing two independent general-purpose amplifier channels with single-ended outputs. The device is specified for 100 dB of open-loop voltage gain and 1.1 MHz of gain-bandwidth product, making it appropriate for signal-conditioning stages that require stable operation from low-frequency instrumentation through audio-range circuits.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2904 belongs to the dual operational amplifier family, combining two amplifier channels in one package. Within the broader hierarchy, it is a low-power bipolar operational amplifier, a general-purpose amplifier IC, and a component within the wider analog signal-processing and semiconductor product category.

The LM2904YPT's two channels can be configured independently as inverting amplifiers, non-inverting amplifiers, comparators, buffers, or differential amplifier stages. Its 100 dB open-loop gain supports accurate signal amplification when closed-loop feedback controls the operating gain. The 1.1 MHz gain-bandwidth product establishes the bandwidth available for closed-loop operation, while the low-power characterization supports economical designs where amplifier power consumption is an important system constraint.

This dual architecture reduces component count and PCB area when a board requires two amplifier functions. It is particularly useful in sensor interfaces, analog signal conditioning, active filters, low-level audio paths, and general industrial control circuits. Because both channels share one package, designers should also evaluate common thermal and supply conditions rather than treating the two amplifier sections as completely independent systems.

Typical circuit implementation uses conventional negative feedback, input bias-current compensation where required, and suitable decoupling near the supply pins. Input and output signal levels must remain compatible with the device's operating limits, while stable feedback and suitable output loading are necessary to maintain expected performance. Signal-routing practices should minimize coupling between the high-gain inputs and nearby switching or digital nodes.

This page combines the exact LM2904YPT configuration, verified distributor listings, drop-in replacement analysis, package-level pin information, and practical design guidance. It helps engineers narrow the selection before requesting a quote for the dual low-power operational amplifier in its compact 8-TSSOP package.

Drop-in-Alternativen für LM2904YPT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM2904YPT (gleiche Bauform und Footprint) – abweichend in Package, Amplifier Type.

STMicroelectronics
Package: 8-pin TSSOP
Amplifier Type: Low-power dual operational amplifier
Vergleichen mit LM2904YPT →
STMicroelectronics
Package: 8-MiniSO
Vergleichen mit LM2904YPT →

LM2904AYPT

✅ Drop-In
STMicroelectronics
📦 8-TSSOP
2 · General-purpose, bipolar, single-ended · 1.1 MHz · 0.6 V/us · 3 V to 30 V · +/-1.5 V to +/-15 V · 20 nA (typical) · 2 mV typical / 7 mV maximum (A grade)

Preis auf Anfrage

Datenblatt ansehen →

LM2904YST

✅ Drop-In
STMicroelectronics
📦 8-TSSOP
Dual operational amplifier · 2 channels · Single-ended output per channel · 30 V · ±15 V

Preis auf Anfrage

Datenblatt ansehen →

LM2904YPT Grenzwerte & elektrische Eigenschaften

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Ausgangstyp Single-ended output per channel
Gain-Bandwidth Product 1.1 MHz
Open-Loop Voltage Gain 100 dB
Power Class Low power
Gehäuse 8-TSSOP
Montageart Surface mount
Channel Count 2

LM2904YPT Pin-Konfiguration

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin 1 OUT1 — Output of amplifier channel 1
Pin 2 -IN1 — Inverting input of amplifier channel 1
Pin 3 +IN1 — Non-inverting input of amplifier channel 1
Pin 4 V- — Negative supply connection
Pin 5 +IN2 — Non-inverting input of amplifier channel 2
Pin 6 -IN2 — Inverting input of amplifier channel 2
Pin 7 OUT2 — Output of amplifier channel 2
Pin 8 V+ — Positive supply connection

Typische Anwendungen

LM2904YPT ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Audio-Range Preamplifier, Active Filter and Filter Bank, Low-Power Analog Control Interface, Portable Measurement and Test Equipment, General-Purpose Analog Buffering.

🏭

Industrial Sensor Signal Conditioning

The LM2904YPT is suitable for conditioning outputs from sensors that produce relatively small analog voltages, such as temperature, pressure, and position sensing elements. Its two channels can provide gain or buffering stages around a bridge or transducer while keeping the implementation in one 8-TSSOP package. The 100 dB open-loop gain supports accurate closed-loop amplification, and the 1.1 MHz gain-bandwidth product provides useful bandwidth for many slow industrial signals. Layout should keep the amplifier inputs away from switching nodes and use a quiet reference ground to prevent coupling into the high-gain stage.

🎧

Audio-Range Preamplifier

The LM2904YPT can be used in low-level audio preamplifier, mixer, or active-filter stages where the signal bandwidth does not require a high-speed precision amplifier. Each channel provides 100 dB open-loop gain and 1.1 MHz gain-bandwidth product, allowing several common closed-loop gain configurations. The low-power dual format reduces component count in stereo or dual-channel analog paths. Input and output coupling, load compatibility, and output swing must be evaluated against the circuit, while careful grounding helps prevent feedback from producing audible instability.

🌐

Active Filter and Filter Bank

The LM2904YPT is appropriate for first-order active filters, amplifiers, and gain blocks within wider analog filter networks. Its 1.1 MHz gain-bandwidth product and 100 dB open-loop gain provide the operating characteristics needed for many low-frequency filtering tasks, while two channels can implement a matched filter section. Component tolerances and amplifier noise directly influence filter accuracy, so the feedback network should use suitable resistor and capacitor grades. Verify stability, output loading, and usable signal bandwidth with the final component values and source impedance.

🔧

Low-Power Analog Control Interface

The LM2904YPT can amplify control signals or buffer sensor outputs in embedded industrial and control systems where two analog channels are needed without the footprint of two separate single amplifiers. Its low-power characterization is useful in compact control boards, while the dual channel count simplifies signal routing and component inventory. Designers should calculate the required closed-loop gain against the 1.1 MHz gain-bandwidth product and confirm that output swing remains adequate for the controlled voltage range. Stable feedback and local supply decoupling are essential for reliable control-loop behavior.

🖥️

Portable Measurement and Test Equipment

The LM2904YPT fits portable measurement equipment that needs two general-purpose amplifier channels for input conditioning, buffering, or differential amplification. The 8-TSSOP surface-mount package supports compact board layouts, and the 1.1 MHz gain-bandwidth product is suitable for many low- and mid-frequency measurement signals. To obtain useful accuracy, the signal source impedance, bias-current compensation, resistor tolerance, and output load should be considered together. High-impedance input nodes require careful board guarding and isolation from digital and switching circuitry.

📱

General-Purpose Analog Buffering

The LM2904YPT can implement voltage followers or buffered signal paths where a source cannot directly drive the next stage. Two independent channels allow buffering of two related signals without using two packages, and the 100 dB open-loop gain provides high voltage-following gain under feedback. A voltage follower is especially useful for reducing loading effects in measurement chains. The design should maintain suitable output loading, avoid excessive output capacitance, and use short feedback paths to preserve stability and response in the 8-TSSOP layout.

What are the key specifications of LM2904YPT that engineers should know?
The LM2904YPT is a dual, low-power, general-purpose operational amplifier with two independent channels, 100 dB open-loop gain, 1.1 MHz gain-bandwidth product, single-ended outputs, and an 8-TSSOP package. According to the STMicroelectronics LM2904YPT datasheet, its dual-channel configuration supports common signal-conditioning functions while reducing the number of amplifier packages required on a PCB.
What is the LM2904YPT used for?
The LM2904YPT is used for general-purpose analog signal amplification in industrial, instrumentation, sensor-interface, filtering, and audio-range circuits. Its two channels can perform inverting, non-inverting, buffering, comparator, or differential-amplifier functions. According to the STMicroelectronics datasheet, the device is a low-power dual operational amplifier with a 1.1 MHz gain-bandwidth product and 100 dB open-loop gain.
Where can I download the LM2904YPT datasheet PDF?
The LM2904YPT datasheet PDF is available through the STMicroelectronics documentation link on this page, with an additional manufacturer-linked PDF mirror listed in the technical documents. The document identifies the part as a low-power dual operational amplifier. Use the pin-description and electrical-characteristics tables in the manufacturer datasheet before assigning PCB signals or designing around absolute maximum limits.
Where is the LM2904YPT pinout located?
The LM2904YPT pinout is shown in the package information on this page and is defined by the manufacturer datasheet's 8-TSSOP connection diagram. The package contains two complete amplifier channels: one output and one input pair per channel, plus the two supply pins. Assign the physical tracks by following the numbered pin diagram rather than relying only on the functional block diagram.
Where to buy LM2904YPT online?
Use the Request a Quote form on this page to request LM2904YPT availability, proposed quantity, and delivery terms. The target configuration is the STMicroelectronics dual operational amplifier in an 8-TSSOP package with 1.1 MHz gain-bandwidth product and 100 dB open-loop gain. The form allows the request to be tied to the exact LM2904YPT ordering code rather than a broader LM2904 family variant.
What is the price of LM2904YPT?
The current commercial price for LM2904YPT is generated through the Request a Quote form on this page rather than published as static text. The request should specify the required quantity, STMicroelectronics target MPN, and 8-TSSOP package. This keeps the quotation aligned with current component availability, including any lot, reel, or delivery requirements.
What is the lead time for LM2904YPT?
The current lead time for LM2904YPT should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production inventory, and delivery location. The request identifies the exact LM2904YPT dual operational amplifier in its 8-TSSOP package so that availability and scheduling can be answered for the intended configuration.
Is LM2904YPT in stock?
LM2904YPT availability should be checked through the Request a Quote form on this page for the required quantity. The component is listed as a standard, general-purpose, dual amplifier in an 8-TSSOP package with 1.1 MHz gain-bandwidth product. Submit the intended order quantity to receive an availability response for the exact ordering code.
What is the best drop-in replacement for LM2904YPT?
The LM2904AYPT is the closest same-manufacturer drop-in candidate identified for the LM2904YPT because it is also a standard dual, single-ended general-purpose operational amplifier in an 8-TSSOP package. Both have the same confirmed two-channel architecture and package format. The exact temperature-grade difference must still be checked against the manufacturer datasheet before production substitution.
Can LM2904AYPT replace LM2904YPT in an existing PCB?
The LM2904AYPT can be considered for an LM2904YPT PCB because both are STMicroelectronics 8-TSSOP dual operational amplifiers with two single-ended channels and a common footprint. According to the manufacturer product listings, the confirmed architectural and package differences are zero channels and zero package differences. Verify the temperature range, electrical limits, and marking requirements before approving the substitution.
What can replace LM2904YPT in an 8-TSSOP design?
The LM2904AYPT and LM2904YST are same-manufacturer 8-TSSOP candidates for replacing LM2904YPT, subject to final electrical and temperature-grade verification. Both preserve the dual operational-amplifier configuration and package format. Additional cross-brand alternatives were not included because the available cross-reference results did not establish the same 8-TSSOP footprint with sufficient pin-compatibility evidence.
LM2904YPT vs LM2904AYPT - which is better for an industrial design?
Choose between LM2904YPT and LM2904AYPT by comparing their manufacturer-specified operating temperature ranges and production requirements, because both use the same 8-TSSOP dual-amplifier format. The confirmed channel count, output style, and package are identical, with a 0-count and 0-package difference. Request the technical datasheet for each exact suffix before choosing based on temperature coverage.
When should I choose LM2904YPT instead of LM2904AYPT?
Choose LM2904YPT when its exact suffix meets the required temperature range, qualification level, and sourcing conditions. The LM2904AYPT offers the same dual, single-ended 8-TSSOP architecture, so board compatibility is straightforward, but suffix-specific operating limits still govern the choice. Confirm those limits in the STMicroelectronics datasheet and maintain the required decoupling and feedback layout.
Is LM2904YPT suitable for sensor interface applications?
The LM2904YPT is suitable for many sensor-interface and general signal-conditioning applications because it provides two channels, 100 dB open-loop gain, and a 1.1 MHz gain-bandwidth product in an 8-TSSOP package. According to the STMicroelectronics datasheet, it is a low-power dual operational amplifier. Sensor excitation, grounding, noise, bandwidth, and output-swing requirements should be evaluated before implementation.
What is the STMicroelectronics equivalent of LM2904YPT?
The STMicroelectronics LM2904AYPT is the closest identified equivalent for LM2904YPT because both are dual, single-ended general-purpose operational amplifiers in an 8-TSSOP package. The LM2904YST is another same-package candidate, but its exact suffix-specific temperature and electrical characteristics require confirmation. A cross-brand equivalent cannot be selected responsibly without verified 8-TSSOP pin compatibility and comparable electrical limits.

Technische Referenzdaten für LM2904YPT – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM2904YPT for compact, low-power, general-purpose analog designs requiring two operational-amplifier channels in an 8-TSSOP package. Its 100 dB open-loop gain and 1.1 MHz gain-bandwidth product fit sensor conditioning, buffering, active filtering, audio-range preamplification, and low-frequency industrial control. Choose LM2904AYPT when it provides the required suffix-specific temperature grade or availability and its manufacturer limits match the design. Choose LM2904YST under the same footprint and verification principles when its temperature and electrical characteristics better match the installation environment. Use a quad amplifier such as LM324ADR when four channels are needed and board area is less important than reducing package count. Before approving any substitution, verify supply range, input and output limits, offset, bias current, slew rate, noise, stability, and operating temperature.

Vergleich mit Alternativen

Parameter Dieses Produkt LM2904AYPT LM2904YST
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-TSSOP 8-TSSOP - same 8-TSSOP - same
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier
Number of Channels 2 2 2
Mounting Type Surface mount Surface mount Surface mount

Wichtigste Unterscheidungsmerkmale

  • Two general-purpose amplifier channels in one compact package (vs. LM324ADR)
  • Direct same-manufacturer 8-TSSOP replacement path (vs. LM2904AYPT)
  • Defined low-frequency general-purpose performance (vs. LM2902N/PB)

Designhinweise

Place the supply bypass capacitor close to pin 8, V+, and connect the negative supply return to pin 4, V-, with the shortest practical ground path. Keep amplifier input and feedback traces away from switching inductors, high-current outputs, and digital clock lines. In an 8-TSSOP layout, prioritize short feedback loops and a stable, uninterrupted ground reference because the device provides 100 dB open-loop gain and can amplify small unwanted coupling.

Do not select the LM2904AYPT or LM2904YST solely because the package matches. Compare the exact suffix-specific operating temperature range, supply limits, offset voltage, input bias current, slew rate, and output-drive requirements in the manufacturer datasheet. A mechanically compatible amplifier can still alter system accuracy, noise, stability, or environmental margin. Document the selected suffix in the schematic and BOM rather than treating all LM2904 variants as electrically interchangeable.

Use separate input and output routing where possible, and connect the feedback network close to the corresponding amplifier pins. High-impedance inputs may require guarding or a driven shield when leakage, humidity, or nearby digital leakage can affect the signal. Verify stable operation with the intended source impedance and capacitive load because the usable response depends on both closed-loop gain and the 1.1 MHz gain-bandwidth product.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No definitive compliance declarations for the exact LM2904YPT suffix were established. Check the current manufacturer product page and the declarations associated with the selected ordering code before regulatory submission.

Daten verifiziert am: 2026-11-13 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

LM2904YPT datasheet LM2904YPT pinout LM2904YPT datasheet pdf LM2904YPT 8-TSSOP LM2904YPT 1.1MHz op amp LM2904YPT 100dB gain LM2904YPT equivalent LM2904YPT replacement LM2904YPT vs LM2904AYPT LM2904YPT application circuit STMicroelectronics LM2904YPT LM2904YPT price LM2904YPT stock LM2904YPT sensor interface

Verwandte Bauteile & Begriffe

STMicroelectronics LM2904YPT LM2904AYPT LM2904YST LM2904PWR LM324ADR LM324KDR LM324NSR dual operational amplifier operational amplifier bipolar operational amplifier general-purpose amplifier analog integrated circuit signal-conditioning IC semiconductor 8-TSSOP TSSOP package family surface-mount package SMD gain-bandwidth product open-loop voltage gain closed-loop feedback single-ended output inverting input non-inverting input sensor signal conditioning active filter voltage follower industrial control audio preamplifier
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen