LM845 - WiFi 802.11ac + Bluetooth 4.2 USB Nano Adapter | LM Technologies
Teilenummer: LM845 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.95 | $1.395,00 |
| 500 | $11.8 | $5.900,00 |
| 1.000 | $9.95 | $9.950,00 |
LM845 Übersicht
A WiFi + Bluetooth USB combo dongle is a peripheral that adds short-range wireless connectivity to a host PC, embedded board, or industrial appliance via the USB bus. Inside the dongle, a single radio SoC handles both WiFi (the 802.11 family) and Bluetooth (BR/EDR/LE), sharing one antenna chain through an internal RF front-end. The host sees two logical interfaces (a network interface for WiFi and an HCI interface for Bluetooth) over USB, which simplifies driver integration and shrinks the dongle to a nano form factor that can be left plugged into a laptop or set-top box.
Key features of the LM845 include 1-stream 802.11ac Wave-2 operation with MU-MIMO, dual-band 2.4/5 GHz support, Bluetooth 4.2 Dual Mode (BR/EDR + LE) with simultaneous Classic + LE links, a USB 2.0 high-speed host interface, and a Realtek-based single-chip radio that minimizes BOM and power draw. The dongle form factor is sized for always-on installation in laptops, mini-PCs, and industrial HMIs.
The internal architecture relies on a Realtek combo MAC/baseband IC with an integrated 2.4/5 GHz PA/LNA chain. WiFi throughput reaches 433 Mbps on the 5 GHz 802.11ac 1x1 link, while Bluetooth supports the standard BR/EDR profiles plus BLE GATT services for IoT pairing and beaconing. Because WiFi and Bluetooth share the same RF chain, the firmware coordinates time-division scheduling to avoid mutual interference.
Typical applications include adding dual-band WiFi 5 + Bluetooth to legacy desktop or embedded systems, IoT gateways and industrial PCs that need a quick wireless drop-in upgrade, point-of-sale terminals that pair with BLE peripherals, retrofitted media PCs and set-top boxes that need 5 GHz WiFi for HD streaming, and developer/test rigs that require a stable Realtek-based combo radio for driver qualification.
When designing with the LM845, remember that it is a finished USB dongle, not a bare IC: designers cannot change the antenna, regulators, or USB stack. Host drivers must support the underlying Realtek chipset for full 802.11ac + Bluetooth 4.2 functionality, and the host OS USB port must provide enough bus power for the 5 GHz PA under load.
This page synthesizes verified distributor information, parametric specifications, and design guidance not consolidated on any single manufacturer or distributor page, including practical notes on host-driver compatibility and concurrent WiFi + Bluetooth operation.
Drop-in-Alternativen für LM845 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LM845 (gleiche Bauform und Footprint) – abweichend in Chipset, Form Factor, Host Interface, Modulation, Product Type.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
LM808
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$11.05 / Stück
Datenblatt ansehen →LM816
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$7.4 / Stück
Datenblatt ansehen →Archer T2U Nano
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EW-7611ULB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
UB500
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LM845 Spezifikationen (herstellerveröffentlicht)
| Product Type | USB WiFi + Bluetooth combo nano adapter (dongle) |
| WiFi Standard | IEEE 802.11ac/a/b/g/n (WiFi 5, 1-stream) |
| WiFi Bands | 2.4 GHz and 5 GHz dual-band |
| MU-MIMO | Supported (Multi-User MIMO) |
| Maximum WiFi Throughput | 433 Mbps (802.11ac 1x1, 80 MHz) |
| Bluetooth Standard | Bluetooth v4.2 Dual Mode (BR/EDR + LE) |
| Bluetooth Backward Compatibility | v2.1+EDR, v3.0 |
| Concurrent Bluetooth Operation | Classic (BR/EDR) and Low Energy (LE) simultaneously |
| Host Interface | USB 2.0 (Type-A connector, nano form factor) |
| Chipset | Realtek single-chip WiFi + Bluetooth combo |
| Antenna | Internal printed/shared antenna chain (per datasheet) |
| Form Factor | Nano USB dongle |
| Power Supply | USB bus powered (5 V from host) |
| RoHS-Status | Compliant (per LM Technologies product page) |
| Compliance | IEEE 802.11ac, Bluetooth v4.2 |
LM845 Schnittstellen & Anschlüsse
LM845 bietet die folgenden, vom Hersteller veröffentlichten Schnittstellen und Anschlüsse: Funk, Bluetooth. Pinbelegung der Erweiterungsheader, Nummerierung der Anschlüsse und elektrische Grenzwerte sind in der Herstellerdokumentation definiert.
| Funk | IEEE 802.11ac/a/b/g/n (WiFi 5, 1-stream) |
| Bluetooth | Bluetooth v4.2 Dual Mode (BR/EDR + LE) |
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Typische Anwendungen
LM845 ist geeignet für 6 Anwendungs: Legacy Desktop WiFi 5 Upgrade, Industrial PC and HMI Wireless Drop-In, Point-of-Sale Terminal Bluetooth Pairing, Set-Top Box and Media PC WiFi Add-On, IoT Gateway and Developer Test Rig, Embedded Linux Single-Board Computer Wireless.
Legacy Desktop WiFi 5 Upgrade
The LM845 brings 5 GHz 802.11ac to a desktop PC that only has 10/100 Ethernet or an obsolete 2.4 GHz WiFi card. Its 433 Mbps peak throughput on a clean 5 GHz channel is more than enough for 4K streaming and large file transfers, and the nano housing leaves adjacent USB ports unobstructed. With 1-stream 802.11ac and MU-MIMO awareness, the LM845 negotiates properly with modern WiFi 5 routers without driver stack changes on Windows or Linux hosts that ship the Realtek driver for this chipset.
Empfohlen
Industrial PC and HMI Wireless Drop-In
Factory HMIs and industrial PCs frequently ship without 5 GHz radios or Bluetooth, and the LM845 is a clean field-upgrade path. Plug the dongle into any USB 2.0 port on the HMI, load the Realtek driver on the Linux BSP, and the device gains concurrent WiFi 5 to the plant network and BLE to nearby sensors or barcode scanners. Because the LM845 draws all power from the USB 5 V rail, no internal wiring or PSU changes are required, which simplifies retrofit installation on legacy IPCs.
Empfohlen
Point-of-Sale Terminal Bluetooth Pairing
POS terminals need a stable Bluetooth link to receipt printers, barcode scanners, and payment PEDs while staying on the store WiFi. The LM845's Bluetooth 4.2 Dual Mode lets the POS pair with a BLE payment terminal and a Classic Bluetooth printer simultaneously, while its 5 GHz WiFi 5 link keeps transactions flowing on a low-interference band. The nano form factor stays flush with the POS chassis and survives the constant plugging typical of retail environments.
Empfohlen
Set-Top Box and Media PC WiFi Add-On
Older set-top boxes, Android TV sticks, and media PCs without 5 GHz WiFi choke on HD streaming when forced onto a congested 2.4 GHz network. The LM845 upgrades them to dual-band 802.11ac with 433 Mbps of clean 5 GHz throughput, enough for multiple HD streams and over-the-top services. Its USB bus-powered design and Realtek driver support on Linux-based media player distributions make it a common drop-in accessory in this segment.
Empfohlen
IoT Gateway and Developer Test Rig
IoT gateways and engineering test rigs often need a known-good combo radio to validate WiFi coexistence, BLE provisioning flows, or driver bring-up. The LM845 is a popular reference design built around the Realtek 1x1 802.11ac + BT 4.2 chipset, which is the same silicon family used in many commercial gateways. Designers can plug it into a Linux dev board, validate throughput and coexistence behavior, and then port the same driver stack to a custom gateway design.
Empfohlen
Embedded Linux Single-Board Computer Wireless
Single-board computers like the Raspberry Pi or industrial SBCs often ship with 2.4 GHz-only radios or no radio at all, and developers need a quick path to dual-band WiFi plus Bluetooth. The LM845 plugs into any USB 2.0 host port and is recognized by mainstream Linux kernels (with the appropriate Realtek out-of-tree driver) as both a WiFi network interface and a Bluetooth HCI device. This dual personality from one dongle saves a USB port compared to using separate WiFi and Bluetooth adapters.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LM845 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LM808 | LM816 | Archer T2U Nano | EW-7611ULB | UB500 |
|---|---|---|---|---|---|---|
| Brand | LM Technologies | LM Technologies | LM Technologies | TP-Link | Edimax | TP-Link |
| Package | USB Nano Dongle | USB Nano Dongle - same | USB Nano Dongle - same | USB Nano Dongle - same | USB Nano Dongle - same | USB Nano Dongle - same |
| WiFi Standard | 802.11ac/a/b/g/n (WiFi 5) | 802.11b/g/n (WiFi 4, 2.4 GHz only) | N/A (Bluetooth-only) | 802.11ac/a/b/g/n (WiFi 5) | 802.11ac/a/b/g/n (WiFi 5) | N/A (Bluetooth-only) |
| WiFi Bands | 2.4 GHz + 5 GHz dual-band | 2.4 GHz only | N/A | 2.4 GHz + 5 GHz dual-band | 2.4 GHz + 5 GHz dual-band | N/A |
| Max WiFi Throughput | 433 Mbps (1x1 802.11ac) | 150 Mbps (1x1 802.11n) | N/A | 433 Mbps (1x1 802.11ac) | 433 Mbps (1x1 802.11ac) | N/A |
| Bluetooth | v4.2 Dual Mode (BR/EDR + LE) | None | Bluetooth (Classic) | None | Bluetooth 4.2 | Bluetooth 5.0 |
| MU-MIMO | Yes | No | N/A | No (1x1) | No (1x1) | N/A |
| Host Interface | USB 2.0 Type-A | USB 2.0 Type-A | USB 2.0 Type-A | USB 2.0 Type-A | USB 2.0 Type-A | USB 2.0 Type-A |
Wichtigste Unterscheidungsmerkmale
- True dual-band WiFi 5 + Bluetooth 4.2 in one nano dongle (vs. LM808)
- MU-MIMO awareness on a 1-stream radio (vs. Archer T2U Nano)
- Concurrent Classic Bluetooth + BLE (vs. UB500)
Designhinweise
Estimated: The LM845 is a finished USB dongle, not a pin-compatible IC. There is no PCB-level 'drop-in' alternative at the silicon level because the antenna, regulators, and USB connector are pre-integrated into the housing. When a design seems to require a replacement, treat any alternative USB dongle as a peripheral swap and re-validate the host driver stack and regulatory certifications rather than treating it as a true IC drop-in.
Estimated: The LM845 draws all power from the host USB 5 V rail. Under 5 GHz 802.11ac transmit bursts, the dongle can pull close to the USB 2.0 high-power unit load (500 mA). If the host is a power-constrained SBC or a hub without an external supply, throughput on the 5 GHz radio can degrade during PA peaks; in that case, plug the LM845 directly into the host or use a powered hub.
Because the LM845 is a sealed nano dongle with an internal antenna, the RF environment around the USB port directly affects throughput. Plugging the dongle into a USB port on the rear of a metal PC chassis, or behind a TV, can attenuate the 5 GHz signal by 10-15 dB. Use a short USB extension cable to move the dongle into line-of-sight with the access point whenever possible.
On Linux hosts, the LM845 typically requires the out-of-tree Realtek driver (rtl88XX series) plus Bluetooth firmware files placed in /lib/firmware. Build the module against the running kernel and confirm that bluetoothd can attach the HCI device; without the firmware blob, WiFi may associate but Bluetooth will fail to enumerate. macOS support is not guaranteed for every Realtek combo chipset and should be tested before deployment.
Compliance-Informationen
RoHS compliance per LM Technologies product page. Detailed REACH, halogen-free, and conflict-minerals disclosures are not published on the public datasheet; request the full compliance statement from LM Technologies for industrial procurement.