HINWEIS ZUR LETZTEN BESTELLMÖGLICHKEIT: LPC2138FHN64 nähert sich dem End-of-Life. Letztes Bestelldatum: Kontaktieren Sie uns. Verfügbare Alternativbauteile ansehen →
NXP Semiconductors

LPC2138FHN64 - 60MHz ARM7 MCU | NXP Semiconductors

Teilenummer: LPC2138FHN64 ✗ Abgekündigt
3.0 V to 3.6 V Vdss 64-HVQFN Package 60 MHz Speed 512 KB Flash (512K x 8) Memory
MOQ: 1 |

LPC2138FHN64 Übersicht

NXP Semiconductors LPC2138FHN64 is a single-chip 16/32-bit ARM7TDMI-S microcontroller operating at up to 60 MHz, with 512 KB of ISP/IAP flash, 32 KB of SRAM, and 47 I/O ports in a 64-HVQFN package. Its operating supply range is 3.0 V to 3.6 V, and its integrated analog resources include up to two 10-bit ADCs and one 10-bit DAC. The device combines a 32-bit ARM processor core with embedded flash, SRAM, serial interfaces, timers, and analog peripherals in one compact surface-mount package.

An ARM7TDMI-S microcontroller is a 32-bit RISC processor for embedded control systems. The ARM7TDMI-S core belongs to the ARM architecture family and combines instruction execution with Thumb processing for code-density benefits. Within the product hierarchy, the LPC2138FHN64 is a microcontroller, an embedded semiconductor, and a programmable control device used to supervise sensors, actuators, communications, and real-time system functions.

The principal feature set includes 512 KB of embedded high-speed flash for program storage, 32 KB of on-chip SRAM, a 60 MHz maximum clock, and 47 general-purpose I/O ports. The serial interface set described for the LPC2131/32/34/36/38 family includes two I2C buses, two SPI interfaces, and UART capability. Analog signal acquisition and output are supported by 10-bit ADC and DAC channels, reducing the need for external converters in moderate-resolution systems.

The architecture combines an ARM7TDMI-S CPU with dedicated peripheral blocks and a 32-bit data bus. ISP and IAP support permits programming and in-application firmware operations, while real-time emulation and embedded trace support assist development and diagnostics. The 64-HVQFN footprint is intended for compact PCB layouts, but its exposed-pad construction requires careful thermal-via and copper design to transfer heat away from the device.

Typical uses include industrial control, embedded automation, IoT equipment, motor-control systems, metering instruments, and low-power board designs. In an automation controller, the MCU can combine sensor conversion through the ADC, actuator control through GPIO and timers, and local communications through I2C, SPI, and UART. In a metering product, the DAC can generate an analog output while the 512 KB flash stores calibration data, algorithms, and communication firmware.

Designers should preserve adequate input-voltage headroom across temperature, route the exposed thermal pad to a thermal-via array, and place decoupling capacitors close to the supply pins. Firmware replacement should follow the device's ISP or IAP procedures, and mixed-signal layouts should isolate analog inputs from high-current switching nodes to avoid measurement errors.

This product page combines the LPC2138FHN64 specifications, package information, lifecycle context, drop-in family alternatives, and application guidance into an engineering-focused reference for MCU selection, PCB implementation, firmware planning, and replacement assessment.

Drop-in-Alternativen für LPC2138FHN64 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

LPC2138FHN64/01

✅ Drop-In
📦 64-HVQFN
Revised ordering designation with the same 60 MHz core, 512 KB flash, 32 KB SRAM, and 64-HVQFN footprint; functional differences are 0%

📋 Referenzalternative (nicht im Katalog)

LPC2138FHN64/01,55

✅ Drop-In
📦 64-HVQFN
Same 60 MHz core, 512 KB flash, and 32 KB SRAM as LPC2138FHN64; the ,55 order code changes commercial packaging rather than electrical ratings

📋 Referenzalternative (nicht im Katalog)

LPC2138FHN64,557

✅ Drop-In
📦 64-HVQFN
Same 60 MHz core, 512 KB flash, and 32 KB SRAM; the ,557 order code changes commercial packaging and has 0% electrical rating difference

📋 Referenzalternative (nicht im Katalog)

LPC2148FHN64

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 64-HVQFN
Shares the 60 MHz ARM7TDMI-S core, 512 KB flash, 32 KB SRAM, and 64-HVQFN class, while peripheral availability differs; estimated parameter proximity is 80%

📋 Referenzalternative (nicht im Katalog)

LPC2146FHN64

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 64-HVQFN
Shares the 60 MHz ARM7TDMI-S core and 64-HVQFN footprint but provides 256 KB flash rather than 512 KB; estimated parameter proximity is 70%

📋 Referenzalternative (nicht im Katalog)

LPC2144FHN64

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 64-HVQFN
Shares the 60 MHz ARM7TDMI-S core and 64-HVQFN footprint but provides 128 KB flash rather than 512 KB; estimated parameter proximity is 70%

📋 Referenzalternative (nicht im Katalog)

LPC2138FHN64 Grenzwerte & elektrische Eigenschaften

Product Type Single-chip 16/32-bit microcontroller
Processor Core ARM7TDMI-S RISC
Maximum Clock Speed 60 MHz
Program Memory 512 KB Flash (512K x 8)
Program Memory Type ISP/IAP Flash
Data Memory 32 KB SRAM (32K x 8)
Datenbusbreite 8 bit
Betriebsversorgungsspannung 3.0 V to 3.6 V
ADC Resolution 10 bit
ADC Channel Count Up to 2 channels
DAC Resolution 10 bit
I/O Port Count 47 ports
I2C Interface Count 2 interfaces
SPI Interface Count 2 interfaces
Gehäuse 64-HVQFN
Montageart Surface mount
Temperature Grade Industrial
Development Support Real-time emulation and embedded trace

LPC2138FHN64 64-hvqfn Pinbelegungsleitfaden

Pinbelegung für LPC2138FHN64 (64-hvqfn-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für LPC2138FHN64 im 64-hvqfn-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LPC2138FHN64.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LPC2138FHN64 ist geeignet für 6 Anwendungs: Industrial Automation Controller, IoT Sensor Gateway, Motor Control and Monitoring, Smart Metering Instrument, Industrial Communication Gateway, Low-Power Embedded Control Board.

🏭

Industrial Automation Controller

The LPC2138FHN64 fits an embedded automation controller because its 60 MHz ARM7TDMI-S core can execute sequencing and motion-control logic while 47 GPIO lines support discrete inputs, outputs, interlocks, and status signals. Two 10-bit ADC channels can sample analog process variables, while I2C and SPI provide local links to sensors, isolated transceivers, and data converters. Its 512 KB of ISP/IAP flash accommodates application firmware, field data, and update routines, and 32 KB of SRAM supports protocol buffers and control state. The practical benefit is consolidated real-time control without a separate processor, but the exposed HVQFN thermal pad must be connected to a via array and the analog inputs isolated from switching-node copper.

🧩

IoT Sensor Gateway

The LPC2138FHN64 can serve as the local control processor in an IoT sensor gateway by acquiring measurements through its 10-bit ADC and managing peripheral devices through two I2C and two SPI interfaces. UART connectivity supports a modem or low-speed service link, while 47 GPIO lines accommodate configuration straps, alarm outputs, and interface-enable signals. The 512 KB flash supports gateways requiring local buffering, protocol translation, or OTA-related firmware logic, and the 60 MHz ARM7TDMI-S core leaves headroom for multiple concurrent communication tasks. Designers should use ISP or IAP for controlled firmware updates and should verify boot pins, reset behavior, and the complete 64-pin assignment before adapting an existing gateway PCB.

🔧

Motor Control and Monitoring

The LPC2138FHN64 is suited to supervisory motor-control systems where a 60 MHz control core, two 10-bit ADCs, 47 GPIO ports, and multiple timer-driven interfaces are useful for managing drive commands and diagnostics. The MCU can monitor analog feedback, operate interlocks, communicate with a power stage, and record operating conditions through UART, SPI, or I2C. Its 512 KB flash is useful for stored control tables and diagnostic logic, while 32 KB of SRAM supports state machines and communication buffers. This is not a substitute for a dedicated high-performance motor-control IC; validate PWM resolution, timer mapping, fault-response latency, and electrical isolation against the motor-drive architecture before connecting power electronics.

📊

Smart Metering Instrument

The LPC2138FHN64 fits metering instruments that need local signal acquisition, calibration storage, and a reliable communications path in a compact package. Its two 10-bit ADCs can digitize moderate-resolution sensor inputs, and the 10-bit DAC can support excitation, reference, or test-signal generation. The 512 KB flash provides room for measurement algorithms, calibration coefficients, event logs, and communications firmware, while 32 KB of SRAM can buffer sampled data. I2C and SPI permit connection to display, memory, or transceiver ICs, while UART supports a service port. For regulatory metering, verify ADC accuracy, oscillator tolerance, reset behavior, and calibration-data retention requirements independently of these general-purpose specifications.

🌐

Industrial Communication Gateway

The LPC2138FHN64 can act as a protocol-conversion or field-bus gateway because the ARM7TDMI-S core runs at 60 MHz and the device combines 32 KB of SRAM, 47 GPIO ports, two UART-capable serial options, I2C, and SPI. Engineers can allocate one interface to a local bus, another to an upstream link, and use GPIO for protocol-select and fault lines. Its 512 KB ISP/IAP flash supports gateway configuration, logging code, and field upgrades, while the 64-HVQFN package reduces board area in compact equipment. A production design should check interrupt latency, buffer depth, connector electrical levels, watchdog behavior, and peripheral pin reuse because the controller does not automatically solve bus isolation or level translation.

🔋

Low-Power Embedded Control Board

The LPC2138FHN64 is appropriate for compact embedded control boards that require substantial local program storage without a higher-complexity application processor. Its 512 KB flash and 32 KB SRAM allow standalone control, logging, and communication firmware, while the 60 MHz ARM7TDMI-S core handles time-sensitive tasks and the 47 GPIO lines support sensors, relays, indicators, and interlocks. The 64-HVQFN footprint supports dense layouts, but exposed-pad heat spreading becomes important whenever switching activity or regulated peripherals raise dissipation. Firmware should use the device’s low-power modes, watchdog, reset controls, and brownout behavior where applicable, and the final power budget should include both active and sleep-state consumption.

What are the key specifications of LPC2138FHN64 that engineers should know?
The LPC2138FHN64 combines a 60 MHz ARM7TDMI-S core, 512 KB of ISP/IAP flash, 32 KB of SRAM, and 47 I/O ports in a 64-HVQFN package. According to the NXP product information, the device operates from 3.0 V to 3.6 V and includes up to two 10-bit ADCs, a 10-bit DAC, two I2C interfaces, and two SPI interfaces. Its main engineering strengths are substantial embedded program storage, extensive GPIO availability, and mixed analog and digital peripherals within one compact embedded controller.
Where can I download the LPC2138FHN64 datasheet PDF?
The official LPC2138FHN64 datasheet and supporting product information are accessed through the NXP product page at https://www.nxp.com/part/LPC2138FHN64. That page links the manufacturer datasheet for the LPC2131/32/34/36/38 microcontroller family and identifies the device as a 60 MHz ARM7TDMI-S controller with 512 KB of ISP/IAP flash and 10-bit ADC and DAC resources. Use the manufacturer document for final pin assignments, electrical limits, and programming details.
Where can I find the LPC2138FHN64 pinout and package information?
The LPC2138FHN64 uses a 64-pin surface-mount HVQFN package with an exposed thermal pad, and its complete pin list must be taken from the pin-description table in the NXP LPC2131/32/34/36/38 datasheet. The package is also described in catalog records as 64-HVQFN or LFQP. Because the exposed pad carries thermal current and the analog and communication pins require exact assignment, do not infer connections from a similarly named 64-pin device without checking the manufacturer pin table.
What is the ARM7TDMI-S core used for in the LPC2138FHN64?
The ARM7TDMI-S core provides the LPC2138FHN64 with 32-bit RISC processing at up to 60 MHz while also supporting Thumb operation for compact firmware. According to the NXP family description, real-time emulation and embedded trace are integrated into the microcontroller architecture. These features make the device suitable for real-time control, embedded automation, motor-control, and metering systems where deterministic interrupt handling, sensor acquisition, and local serial communication are required.
How much flash and SRAM does the LPC2138FHN64 contain?
The LPC2138FHN64 contains 512 KB of embedded high-speed ISP/IAP flash and 32 KB of SRAM. The flash stores executable code, application data, and potentially bootloader or update firmware, while the SRAM provides working memory for stacks, buffers, protocol state, and control algorithms. These capacities place the device well above small 8-bit-control use cases while remaining below the memory levels typical of higher-end application processors.
What analog interfaces are integrated into the LPC2138FHN64?
The LPC2138FHN64 integrates up to two 10-bit ADCs and one 10-bit DAC. The ADCs support acquisition of moderate-resolution sensor signals, while the DAC can generate an analog output for measurement excitation, control references, or signal generation. According to the NXP product summary, these converters are part of the family architecture. For precision instrumentation, verify the datasheet’s input bandwidth, conversion timing, reference-voltage requirements, and noise characteristics.
What communications interfaces does the LPC2138FHN64 provide?
The LPC2138 family provides two I2C interfaces, two SPI interfaces, and UART capability alongside 47 GPIO ports. These interfaces allow the LPC2138FHN64 to connect sensors, converters, memory, displays, transceivers, and service connectors without requiring separate interface controllers. I2C suits low-speed peripheral addressing, SPI supports faster full-duplex transfers, and UART is useful for console or point-to-point communications in industrial and embedded products.
What is the difference between LPC2138FHN64 and LPC2138FHN64/01?
The LPC2138FHN64/01 is the /01 orderable version associated with the same 60 MHz ARM7TDMI-S, 512 KB flash, 32 KB SRAM, and 64-HVQFN device family. The /01 identifier distinguishes the manufacturer’s revised ordering designation rather than introducing a cross-package conversion. NXP describes archived LPC2138 content as historical, so procurement should confirm the exact suffix, date code, and documentation revision before using either ordering code in a new production BOM.
LPC2138FHN64 vs LPC2148FHN64 - which is better for a new design?
The LPC2138FHN64 and LPC2148FHN64 share the 60 MHz ARM7TDMI-S core, 512 KB flash, 32 KB SRAM, 3.0 V to 3.6 V supply range, and 64-HVQFN class of package, but their peripheral selections differ. LPC2148FHN64 adds capabilities associated with USB and Ethernet-oriented designs, while LPC2138FHN64 is positioned around CAN, motor-control, and general embedded interfaces. The correct choice depends on the required peripheral mix and verified board-level pin compatibility, not merely the shared memory size.
When should I choose LPC2138FHN64 over another 64-HVQFN ARM7 controller?
Choose LPC2138FHN64 when a design requires the established combination of a 60 MHz ARM7TDMI-S core, 512 KB ISP/IAP flash, 32 KB SRAM, 47 I/O ports, 10-bit ADCs, a 10-bit DAC, and mixed serial interfaces. It is particularly appropriate for industrial automation, metering, motor-control, and low-power embedded boards. Choose another family member when a different peripheral set, temperature grade, memory density, or lifecycle objective is more important than preserving this specific controller configuration.
Is LPC2138FHN64 suitable for industrial control and motor-control systems?
Yes, the LPC2138FHN64 is suitable for many industrial-control and motor-control applications because it provides a 60 MHz ARM7TDMI-S core, 47 I/O ports, two 10-bit ADCs, two I2C buses, two SPI interfaces, and UART capability. Its 512 KB flash supports substantial embedded control firmware and 32 KB SRAM supports working state. Confirm motor-driver interface timing, isolation requirements, environmental limits, and any required automotive or functional-safety qualification before deployment.
What can replace the LPC2138FHN64 on an existing PCB?
The closest documented drop-in choice is the LPC2138FHN64/01 because it retains the same 64-HVQFN footprint, 60 MHz ARM7TDMI-S core, 512 KB flash, and 32 KB SRAM while carrying the revised ordering suffix. Other LPC21xx family members may preserve the package and core but can differ in flash density or peripheral population, so their match percentage is lower. Verify every pin, supply requirement, boot configuration, and exposed-pad connection before approving a replacement.
Is there a direct NXP drop-in replacement with the same 64-HVQFN pinout?
A same-footprint NXP alternative should be selected only after comparing the full datasheet pin tables, because a shared 64-HVQFN outline does not guarantee identical peripheral pins. LPC2138FHN64/01 is the closest ordering designation, while LPC2148FHN64 and related LPC214x devices retain much of the core and memory configuration but differ in peripheral functions. For a cross-brand ARM7 replacement, software timing, peripheral addresses, interrupt mapping, and every signal assignment must be treated as a redesign rather than an automatic substitution.
Where to buy LPC2138FHN64 online and what is its price?
Use the Request a Quote form on this page to request LPC2138FHN64 availability, current unit pricing, quantity breaks, lead time, and suitable packaging from XAIPART. Because the NXP product record is archived and the exact ordering suffix, tape-and-reel orientation, and tray requirements can affect procurement, submit the complete MPN and target quantity with the request. The structured pricing fields on this page should be used for the current commercial response rather than static historical figures.
What is the lead time and stock status for LPC2138FHN64?
The current stock position and lead time for LPC2138FHN64 should be requested through the Request a Quote form on this page. NXP’s LPC2138 product information is archived, which means availability may depend on remaining factory inventory, approved supply channels, or previously manufactured lots rather than routine current production. Include your required date code, package orientation, target annual usage, and permitted alternative plan when requesting a quotation and lead-time confirmation.

Technische Referenzdaten für LPC2138FHN64 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LPC2138FHN64 for a compact embedded design that needs the established 60 MHz ARM7TDMI-S core, 512 KB ISP/IAP flash, 32 KB SRAM, 47 GPIO ports, two 10-bit ADCs, a 10-bit DAC, and multiple serial interfaces. It is particularly appropriate for industrial control, automation, metering, motor supervision, and IoT equipment where a 64-HVQFN controller consolidates mixed analog and digital functions. Choose LPC2138FHN64/01 or its documented order-code variants when procurement requires the revised manufacturer designation; verify packaging and date-code requirements before release. LPC2148FHN64 is the more relevant family option when its additional peripheral functions are required, but its differing peripheral mapping demands a complete pin-table review. LPC2146FHN64 and LPC2144FHN64 reduce flash capacity to 256 KB and 128 KB respectively, so they are appropriate only when code-size requirements are comfortably met. No cross-brand drop-in equivalent was established; changing processor architecture requires firmware and hardware validation rather than a simple board substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt LPC2138FHN64/01 LPC2138FHN64/01,55 LPC2138FHN64,557 LPC2148FHN64 LPC2146FHN64
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-HVQFN 64-HVQFN 64-HVQFN 64-HVQFN 64-HVQFN 64-HVQFN
Processor Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum Clock Speed 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Program Memory 512 KB 512 KB 512 KB 512 KB 512 KB 256 KB

Wichtigste Unterscheidungsmerkmale

  • High flash capacity within the LPC21xx family (vs. LPC2146FHN64)
  • Direct ordering compatibility with the revised /01 designation (vs. LPC2138FHN64/01)
  • Broader GPIO availability for embedded control (vs. LPC2148FHN64)
  • Mixed-signal integration reduces external converter count (vs. LPC2144FHN64)

Designhinweise

Treat the HVQFN exposed pad as a thermal and electrical construction feature, not as an optional thermal area. Connect it to the ground plane through multiple vias and provide uninterrupted copper beneath the device. Estimated: with a junction-to-ambient thermal resistance of 30 C/W, 250 mW of dissipation produces about 7.5 C junction-temperature rise; actual resistance depends on board size, copper, vias, and ambient conditions. Recalculate with the PCB implementation used in the final product.

Place the supply bypass capacitors close to the corresponding VDD pins and keep the high-current return path short. Separate analog inputs from digital clocks, UART activity, and switching-power routing, and provide a quiet return path for the ADC and DAC reference network. The 64-HVQFN footprint has fine-pitch leads, so inspect the manufacturer land pattern for pad dimensions, solder-mask clearance, and exposed-pad paste volume before releasing artwork.

Do not assume that every 64-HVQFN LPC21xx controller is electrically interchangeable. Verify boot-mode pins, reset polarity, oscillator connections, debug signals, analog pins, communication assignments, and exposed-pad connections against the exact datasheet. Software migration also requires checks to peripheral addresses, interrupt vectors, register definitions, and driver support. A package drawing match is necessary for PCB reuse but is not sufficient to approve a drop-in replacement.

Design the 3.0 V to 3.6 V supply rail with transient margin for startup and peripheral load, and verify brownout behavior against the minimum voltage required by the firmware. The 60 MHz CPU and switched I/O can create fast current edges, so use a low-impedance distribution path and local high-frequency decoupling. For battery-powered products, calculate average current from processor active time, peripheral duty cycle, and sleep duration rather than using only the maximum operating frequency.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The NXP product information identifies an industrial-grade microcontroller but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the standard industrial LPC2138FHN64 ordering designation.

Ähnliche Suchanfragen

LPC2138FHN64 datasheet LPC2138FHN64 datasheet pdf LPC2138FHN64 pinout LPC2138FHN64 specifications LPC2138FHN64 equivalent LPC2138FHN64 replacement LPC2138FHN64 cross reference LPC2138FHN64 footprint LPC2138FHN64 vs LPC2148FHN64 NXP LPC2138FHN64 LPC2138FHN64 industrial controller LPC2138FHN64 price LPC2138FHN64 stock LPC2138 64-HVQFN pinout LPC2138FHN64 ADC DAC application

Verwandte Bauteile & Begriffe

NXP Semiconductors LPC2138FHN64 LPC2138FHN64/01 LPC2148FHN64 ARM7TDMI-S Arm architecture 32-bit RISC core Thumb instruction set microcontroller embedded controller single-chip microcontroller semiconductor ISP IAP embedded flash SRAM 10-bit ADC 10-bit DAC I2C SPI UART 64-HVQFN QFN family surface mount SMD package real-time emulation embedded trace industrial automation IoT gateway motor control smart metering
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen