LT1001ACH - ±22V Precision Op Amp, TO-5 | Analog Devices
Teilenummer: LT1001ACH ✓ AktivLT1001ACH Übersicht
An operational amplifier is an active analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The precision operational-amplifier category extends that basic function with emphasis on low input offset voltage, low input bias current, low noise, high open-loop gain, and stable behavior over temperature and time. Within the broader semiconductor hierarchy, the LT1001ACH belongs to the precision amplifier family, which supports instrumentation, measurement, conversion, and feedback-control systems.
The manufacturer describes the LT1001 family as a precision operational amplifier with close attention to the distribution of several key parameters. The LT1001ACH combines a ±22 V maximum supply capability with one amplifier circuit in the TO-5 package. Its precision-oriented design is useful where input offset error can affect measurement accuracy, particularly in high-gain amplifier stages, current-to-voltage converters, low-level sensor interfaces, and precision reference buffers.
The LT1001 architecture is intended to provide predictable behavior in real feedback networks. Because this device is a voltage-feedback operational amplifier, external feedback components determine closed-loop gain and bandwidth. Its accuracy is most valuable when operating near the electrical center of the supported supply range, allowing output swing and common-mode range to remain compatible with the signal being amplified. Stable feedback design and careful grounding remain essential to preserve the precision expected from the device.
Typical uses include precision instrumentation amplifiers, low-level sensor front ends, laboratory measurement equipment, audio preamplification, active filters, and analog signal-conditioning modules. In a typical application, the amplifier operates in an inverting or non-inverting configuration with external resistors setting the gain and capacitance or filtering components controlling bandwidth. The 8-pin TO-5 package also supports applications where a conventional metal-can amplifier is preferred for mechanical compatibility or historical PCB assemblies.
For a new design, verify input bias current, input offset voltage, noise, common-mode range, output swing, slew rate, gain-bandwidth product, and compensation requirements against the Analog Devices LT1001 datasheet. Decoupling capacitors should be placed close to the supply pins, and the circuit should provide adequate output-current margin for the selected load and feedback topology.
This product record combines manufacturer documentation, component identification, application guidance, and engineering-oriented replacement analysis. It also distinguishes verified electrical characteristics from parameters requiring circuit-specific confirmation, helping engineers evaluate the LT1001ACH for precision analog designs before committing to a footprint or qualification plan.
Drop-in-Alternativen für LT1001ACH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LT1001ACH (gleiche Bauform und Footprint) – abweichend in Package, Supply Voltage Range.
LT1001AH
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LT1001BH
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LT1001CH
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LT1001CSH
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LT1001ACH Grenzwerte & elektrische Eigenschaften
| Product Type | Precision operational amplifier |
| Number of Circuits | 1 circuit |
| Maximum Total Supply Voltage | 44 V |
| Supply Voltage Range | ±22 V maximum |
| Gehäuse | 8-pin TO-5 metal package |
| Montageart | Through-hole |
LT1001ACH 8-pin to-5 metal package Pinbelegungsleitfaden
Pinbelegung für LT1001ACH (8-pin to-5 metal package-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für LT1001ACH.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LT1001ACH ist geeignet für 6 Anwendungs: Precision Instrumentation Amplifier, Low-Level Sensor Signal Conditioning, Active Audio Preamplifier, Laboratory Measurement Equipment, Precision Voltage Reference Buffer, Industrial Analog Signal Conditioning.
Precision Instrumentation Amplifier
The LT1001ACH fits the final gain stage of a precision instrumentation signal chain because it provides one precision operational-amplifier circuit in an 8-pin TO-5 package and supports supply voltages up to ±22 V. It can be configured as a non-inverting or inverting amplifier using external feedback resistors, while a preceding instrumentation stage develops the differential signal. The key design consideration is input offset voltage: the LT1001ACH can minimize signal-chain error when the amplifier operates with adequate feedback and the required common-mode voltage. Before release, verify offset voltage, input bias current, gain-bandwidth product, and output swing at the intended supply and temperature. Its TO-5 construction also supports legacy or mechanically standardized instrumentation platforms.
Empfohlen
Low-Level Sensor Signal Conditioning
The LT1001ACH is appropriate for conditioning low-level sensor outputs where small offset and bias errors could obscure the measured quantity. A Wheatstone-bridge, thermocouple, or resistive sensor can feed a differential or inverting stage that converts the signal to a voltage suitable for an ADC. The LT1001ACH's ±22 V maximum supply capability provides headroom for bipolar sensor excitation and signal swing, while the one-circuit TO-5 format simplifies direct PCB mounting. Feedback resistor matching directly influences gain error, so use suitable resistor tolerances and confirm the actual offset, bias-current, noise, and common-mode limits from the Analog Devices datasheet before defining the measurement resolution.
Empfohlen
Active Audio Preamplifier
The LT1001ACH can serve in a high-gain audio preamplifier or active equalizer when a conventional low-noise precision amplifier is preferred over a general-purpose device. Its one-circuit architecture supports a configurable non-inverting or inverting signal path, and the ±22 V maximum supply rating permits conventional bipolar audio rails below that limit. The trade-off is that the TO-5 package is larger than modern surface-mount amplifier packages and offers less placement flexibility on compact boards. Component selection should account for input noise, gain-bandwidth interaction, output-current capability, and the desired channel attenuation. Shield the input from ground-current coupling and keep feedback paths short to preserve signal integrity.
Empfohlen
Laboratory Measurement Equipment
The LT1001ACH is well suited to laboratory measurement equipment that amplifies small voltages and drives downstream converters or display systems. Its precision-operational-amplifier classification and wide supply capability support bipolar excitation and feedback networks with useful output headroom. Engineers can use the device in gain stages, buffer stages, or active filters, provided the selected feedback network remains stable at the intended noise gain. Because the exact bandwidth, slew-rate, and output-swing limits depend on the operating configuration, review the Analog Devices LT1001 datasheet for the required gain, load, and temperature. The metal TO-5 package is mechanically convenient for laboratory and industrial instruments requiring a conventional through-hole footprint.
Empfohlen
Precision Voltage Reference Buffer
The LT1001ACH can buffer a low-level reference voltage when the source has insufficient drive current or requires isolation from the following stage. In this topology, the amplifier operates at low closed-loop gain to preserve voltage accuracy, and its input bias current must be small relative to the reference source impedance. The ±22 V maximum supply capability gives designers flexibility around bipolar reference and analog rails, although the common-mode and output ranges must be checked independently. Use short feedback traces, maintain a defined ground reference, and confirm capacitive loading because excessive output capacitance can affect stability. The TO-5 package is useful in modular reference systems where through-hole construction simplifies assembly and servicing.
Empfohlen
Industrial Analog Signal Conditioning
The LT1001ACH can be used in industrial analog modules for conditioning transducer outputs before digitization or control. Its one-circuit precision configuration is useful in isolated or compact signal-conditioning boards that already provide regulated rails, while the TO-5 package supports conventional through-hole assembly. The available supply headroom is valuable for industrial interfaces that operate with bipolar signals, but the common-mode input range and output swing must remain within the limits required by the sensor and downstream converter. Confirm the exact LT1001ACH temperature class for the environment and check offset drift, bias current, noise, and stability requirements. Provide local supply bypassing and a quiet ground return to minimize conversion error.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LT1001ACH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LT1001AH | LT1001BH | LT1001CH | LT1001CSH |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin TO-5 | 8-pin TO-5 | 8-pin TO-5 | 8-pin TO-5 | 8-pin TO-5 |
| Product Type | Precision operational amplifier | Precision operational amplifier | Precision operational amplifier | Precision operational amplifier | Precision operational amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
Wichtigste Unterscheidungsmerkmale
- Wide bipolar supply capability in a conventional precision-op-amp package (vs. LT1001CH)
- Direct family-level mechanical interchangeability (vs. LT1001AH)
- Single-circuit precision format supports focused analog designs (vs. LT1001BH)
Designhinweise
Place the supply-bypass capacitors directly beside the LT1001ACH power pins and connect their ground returns to the quiet analog ground region. Keep the feedback resistors and their input node compact because parasitic resistance and capacitance can alter closed-loop gain and stability. Route the non-inverting input away from supply-current paths and switching nodes. The 8-pin TO-5 footprint must follow the manufacturer's pin drawing exactly because offset-null and no-connect positions are not interchangeable with those of a generic eight-pin amplifier.
Do not select a replacement solely by the TO-5 outline. Confirm that the candidate uses the same pin numbers for the inverting input, non-inverting input, output, positive supply, negative supply, offset null, and unused position. Then verify the required gain, common-mode input range, output swing, input bias current, offset voltage, stability, and operating-temperature class. A suffix change within the LT1001 family can alter environmental classification even though the mechanical footprint and core amplifier function remain the same.
For small-signal measurement designs, treat offset voltage, bias-current-generated error, noise, and drift as a combined error budget rather than optimizing gain alone. Calculate the bias-current contribution using the total resistance seen by each input, and compare it with the signal source impedance. Keep source impedances balanced where possible to reduce offset-current imbalance. At high closed-loop gain, use the manufacturer's compensation and stability guidance and evaluate the complete feedback network rather than relying only on the nominal gain-bandwidth product.
The ±22 V rating is an absolute supply capability, not a recommendation to operate at the limit. Select rail combinations that keep input common-mode voltage, output swing, and internal dissipation within their respective limits. Check the load current and voltage-drop contribution across the TO-5 leads, and provide adequate copper or thermal conduction in the intended assembly. Use separate routing or filtering if the amplifier shares a supply rail with switching converters, motors, or other high-current switching loads.
Compliance-Informationen
No explicit environmental or material-compliance declaration for the exact LT1001ACH ordering code was identified. Compliance must be confirmed with Analog Devices or the authorized supply chain before qualification.