Analog Devices

LT1001ACH - ±22V Precision Op Amp, TO-5 | Analog Devices

MPN: LT1001ACH ✓ 啟用中
44 V Vdss 8-pin TO-5 metal package Package
MOQ: 1 |

LT1001ACH 概覽

The Analog Devices LT1001ACH is a single-circuit precision operational amplifier designed for accurate signal conditioning with supply voltages extending to ±22 V. It is packaged in an 8-pin TO-5 hermetic metal package and is identified by Analog Devices as a production part. The combination of precision-op-amp architecture, low-noise operation, and a wide supply-voltage range makes the LT1001ACH suitable for instrumentation, industrial measurement, audio signal paths, and analog systems that must preserve small signals over long signal chains.

An operational amplifier is an active analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The precision operational-amplifier category extends that basic function with emphasis on low input offset voltage, low input bias current, low noise, high open-loop gain, and stable behavior over temperature and time. Within the broader semiconductor hierarchy, the LT1001ACH belongs to the precision amplifier family, which supports instrumentation, measurement, conversion, and feedback-control systems.

The manufacturer describes the LT1001 family as a precision operational amplifier with close attention to the distribution of several key parameters. The LT1001ACH combines a ±22 V maximum supply capability with one amplifier circuit in the TO-5 package. Its precision-oriented design is useful where input offset error can affect measurement accuracy, particularly in high-gain amplifier stages, current-to-voltage converters, low-level sensor interfaces, and precision reference buffers.

The LT1001 architecture is intended to provide predictable behavior in real feedback networks. Because this device is a voltage-feedback operational amplifier, external feedback components determine closed-loop gain and bandwidth. Its accuracy is most valuable when operating near the electrical center of the supported supply range, allowing output swing and common-mode range to remain compatible with the signal being amplified. Stable feedback design and careful grounding remain essential to preserve the precision expected from the device.

Typical uses include precision instrumentation amplifiers, low-level sensor front ends, laboratory measurement equipment, audio preamplification, active filters, and analog signal-conditioning modules. In a typical application, the amplifier operates in an inverting or non-inverting configuration with external resistors setting the gain and capacitance or filtering components controlling bandwidth. The 8-pin TO-5 package also supports applications where a conventional metal-can amplifier is preferred for mechanical compatibility or historical PCB assemblies.

For a new design, verify input bias current, input offset voltage, noise, common-mode range, output swing, slew rate, gain-bandwidth product, and compensation requirements against the Analog Devices LT1001 datasheet. Decoupling capacitors should be placed close to the supply pins, and the circuit should provide adequate output-current margin for the selected load and feedback topology.

This product record combines manufacturer documentation, component identification, application guidance, and engineering-oriented replacement analysis. It also distinguishes verified electrical characteristics from parameters requiring circuit-specific confirmation, helping engineers evaluate the LT1001ACH for precision analog designs before committing to a footprint or qualification plan.

直接替換替代品,適用於 LT1001ACH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LT1001ACH (相同外形與佔位) — 差異在於 Package, Supply Voltage Range.

Analog Devices
Package: 8-pin TO-5 metal can
Supply Voltage Range: -3 V to +18 V
比較對象 LT1001ACH →

LT1001AH

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin TO-5
Same LT1001 family and 8-pin TO-5 footprint; temperature and qualification classification differ, with the exact operating-limit difference requiring confirmation from the ordering table.

📋 參考替代品(不在目錄中)

LT1001BH

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin TO-5
Same LT1001 family and 8-pin TO-5 footprint; temperature and qualification classification differ, with the exact operating-limit difference requiring confirmation from the ordering table.

📋 參考替代品(不在目錄中)

LT1001CH

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 8-pin TO-5
Precision operational amplifier · 1 circuit · 700 pA · 110 dB · -3 V to +18 V · 8-pin TO-5 metal can · 8 pins

聯絡詢價

查看資料表 →

LT1001CSH

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin TO-5
Same LT1001 family and 8-pin TO-5 footprint; suffix-specific commercial and environmental classification differs from the LT1001ACH.

📋 參考替代品(不在目錄中)

LT1001ACH 最大額定值與電氣特性

Product Type Precision operational amplifier
Number of Circuits 1 circuit
Maximum Total Supply Voltage 44 V
Supply Voltage Range ±22 V maximum
封裝 8-pin TO-5 metal package
安裝類型 Through-hole

LT1001ACH 8-pin to-5 metal package 腳位配置指南

LT1001ACH(8-pin to-5 metal package 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LT1001ACH 的 8-pin to-5 metal package 封裝腳位圖

無詳細腳位定義資料: LT1001ACH.

請參閱 資料表 以查看完整腳位配置。

典型應用

LT1001ACH 適用於 6 應用s: Precision Instrumentation Amplifier, Low-Level Sensor Signal Conditioning, Active Audio Preamplifier, Laboratory Measurement Equipment, Precision Voltage Reference Buffer, Industrial Analog Signal Conditioning.

🏭

Precision Instrumentation Amplifier

The LT1001ACH fits the final gain stage of a precision instrumentation signal chain because it provides one precision operational-amplifier circuit in an 8-pin TO-5 package and supports supply voltages up to ±22 V. It can be configured as a non-inverting or inverting amplifier using external feedback resistors, while a preceding instrumentation stage develops the differential signal. The key design consideration is input offset voltage: the LT1001ACH can minimize signal-chain error when the amplifier operates with adequate feedback and the required common-mode voltage. Before release, verify offset voltage, input bias current, gain-bandwidth product, and output swing at the intended supply and temperature. Its TO-5 construction also supports legacy or mechanically standardized instrumentation platforms.

🧩

Low-Level Sensor Signal Conditioning

The LT1001ACH is appropriate for conditioning low-level sensor outputs where small offset and bias errors could obscure the measured quantity. A Wheatstone-bridge, thermocouple, or resistive sensor can feed a differential or inverting stage that converts the signal to a voltage suitable for an ADC. The LT1001ACH's ±22 V maximum supply capability provides headroom for bipolar sensor excitation and signal swing, while the one-circuit TO-5 format simplifies direct PCB mounting. Feedback resistor matching directly influences gain error, so use suitable resistor tolerances and confirm the actual offset, bias-current, noise, and common-mode limits from the Analog Devices datasheet before defining the measurement resolution.

🎧

Active Audio Preamplifier

The LT1001ACH can serve in a high-gain audio preamplifier or active equalizer when a conventional low-noise precision amplifier is preferred over a general-purpose device. Its one-circuit architecture supports a configurable non-inverting or inverting signal path, and the ±22 V maximum supply rating permits conventional bipolar audio rails below that limit. The trade-off is that the TO-5 package is larger than modern surface-mount amplifier packages and offers less placement flexibility on compact boards. Component selection should account for input noise, gain-bandwidth interaction, output-current capability, and the desired channel attenuation. Shield the input from ground-current coupling and keep feedback paths short to preserve signal integrity.

🔧

Laboratory Measurement Equipment

The LT1001ACH is well suited to laboratory measurement equipment that amplifies small voltages and drives downstream converters or display systems. Its precision-operational-amplifier classification and wide supply capability support bipolar excitation and feedback networks with useful output headroom. Engineers can use the device in gain stages, buffer stages, or active filters, provided the selected feedback network remains stable at the intended noise gain. Because the exact bandwidth, slew-rate, and output-swing limits depend on the operating configuration, review the Analog Devices LT1001 datasheet for the required gain, load, and temperature. The metal TO-5 package is mechanically convenient for laboratory and industrial instruments requiring a conventional through-hole footprint.

📺

Precision Voltage Reference Buffer

The LT1001ACH can buffer a low-level reference voltage when the source has insufficient drive current or requires isolation from the following stage. In this topology, the amplifier operates at low closed-loop gain to preserve voltage accuracy, and its input bias current must be small relative to the reference source impedance. The ±22 V maximum supply capability gives designers flexibility around bipolar reference and analog rails, although the common-mode and output ranges must be checked independently. Use short feedback traces, maintain a defined ground reference, and confirm capacitive loading because excessive output capacitance can affect stability. The TO-5 package is useful in modular reference systems where through-hole construction simplifies assembly and servicing.

⚡

Industrial Analog Signal Conditioning

The LT1001ACH can be used in industrial analog modules for conditioning transducer outputs before digitization or control. Its one-circuit precision configuration is useful in isolated or compact signal-conditioning boards that already provide regulated rails, while the TO-5 package supports conventional through-hole assembly. The available supply headroom is valuable for industrial interfaces that operate with bipolar signals, but the common-mode input range and output swing must remain within the limits required by the sensor and downstream converter. Confirm the exact LT1001ACH temperature class for the environment and check offset drift, bias current, noise, and stability requirements. Provide local supply bypassing and a quiet ground return to minimize conversion error.

推薦產品摘要

LT1001AH Same-family precision op amp option 用於: Precision Instrumentation Amplifier, Active Audio Preamplifier, Laboratory Measurement Equipment, Industrial Analog Signal Conditioning LT1001BH Same-family precision op amp option 用於: Precision Instrumentation Amplifier, Active Audio Preamplifier, Precision Voltage Reference Buffer LT1001CH Analog Devices 用於: Low-Level Sensor Signal Conditioning, Laboratory Measurement Equipment, Industrial Analog Signal Conditioning LT1001CSH Same-family precision op amp option 用於: Low-Level Sensor Signal Conditioning, Precision Voltage Reference Buffer
What is the LT1001ACH?
The LT1001ACH is a single-circuit precision operational amplifier from Analog Devices in an 8-pin TO-5 package. According to the Analog Devices LT1001 datasheet, the family is optimized for the distribution of key precision parameters, including input offset voltage, bias current, noise, gain, and stability. Its support for supply voltages up to ±22 V makes it suitable for instrumentation and other low-level analog signal-conditioning circuits.
What are the key specifications of LT1001ACH that engineers should know?
The LT1001ACH is a one-circuit precision operational amplifier with a maximum supply voltage of ±22 V packaged in an 8-pin TO-5 metal package. According to the Analog Devices LT1001 datasheet, its design emphasizes the distribution of several precision parameters rather than a single headline rating. Before finalizing a design, consult the datasheet tables for input offset voltage, input bias current, gain-bandwidth product, noise, slew rate, common-mode range, and output swing under the intended temperature and supply conditions.
What is the supply voltage range of LT1001ACH?
The LT1001ACH supports a total supply span of up to 44 V, equivalent to ±22 V as identified in the component listing and datasheet search records. The Analog Devices LT1001 datasheet uses ±15 V for many typical operating conditions, but that test condition does not redefine the device's maximum supply capability. Actual usable input, output, and common-mode ranges must remain inside the absolute limits for the selected operating temperature.
Where can I download the LT1001ACH datasheet PDF?
The official LT1001ACH datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/LT1001.pdf. The document contains the LT1001 family's electrical characteristics, package information, ordering information, and application guidance. It is the appropriate document for checking absolute maximum ratings, test conditions, input offset specifications, common-mode range, output swing, and notes associated with individual part-model suffixes.
Where can I find the LT1001ACH pinout?
The LT1001ACH pinout is documented in the pin-configuration section of the official Analog Devices LT1001 datasheet. The component uses an 8-pin TO-5 package, and the datasheet distinguishes the amplifier connections from offset-null and unconnected positions. Use the manufacturer pin drawing when assigning PCB tracks; do not rely on a generic 8-pin op-amp footprint because pin functions and connection polarity must match the LT1001 family exactly.
Is LT1001ACH suitable for precision instrumentation?
Yes, the LT1001ACH is suitable for precision instrumentation when the selected operating point satisfies the LT1001 electrical limits. Its one-circuit precision-op-amp architecture and support for supplies up to ±22 V suit low-level sensor conditioning, active filters, and closed-loop measurement amplifiers. The Analog Devices datasheet should be used to verify offset, bias current, noise, bandwidth, and output-swing requirements for the actual gain and common-mode voltage.
What can replace the LT1001ACH?
The closest replacements must use the same 8-pin TO-5 footprint and provide pin-compatible amplifier connections. LT1001AH and LT1001BH are same-family candidates for evaluation, while the LT1001CH offers another commercial-temperature ordering option. No replacement should be installed without checking offset null, compensation, supply, common-mode, output-swing, and temperature specifications because suffix differences can change qualification or operating limits even when the mechanical package is unchanged.
Can LT1001AH replace the LT1001ACH?
The LT1001AH can be evaluated as a same-family, pin-compatible replacement because both use the 8-pin TO-5 LT1001 package. Its temperature and qualification characteristics must be compared with the LT1001ACH before approval because those differences are not captured by package matching alone. Confirm the relevant rows of the Analog Devices LT1001 datasheet, including operating-temperature limits and any grade-specific burn-in or qualification requirements.
Is LT1001ACH the same as LT1001CH?
The LT1001ACH and LT1001CH share the LT1001 amplifier family and 8-pin TO-5 mechanical package, but their ordering suffixes may represent different temperature or qualification classifications. The Analog Devices product-selection table is the controlling source for the exact distinction. Engineers should compare the complete ordering table rather than treating the two suffixes as automatically identical for environmental qualification.
When should I choose LT1001ACH over LT1001AH?
Choose the LT1001ACH when its specified temperature class, qualification level, and availability match the target application. Choose LT1001AH instead when the broader environmental class of that ordering option is required for the system. Because both parts use the same LT1001 family and TO-5 footprint, the choice should be driven by the ordering table and application qualification requirements rather than by mechanical fit alone.
When should I choose LT1001ACH over LT1001BH?
Choose the LT1001ACH when its listed environmental classification satisfies the product's operating requirements and the LT1001BH offers no necessary advantage. Choose LT1001BH if its specific temperature grade, qualification, or lifecycle conditions better match a demanding application. Both use the same 8-pin TO-5 family package, so compare their ordering codes and datasheet limits before making a final selection.
LT1001ACH vs LT1001CH - which is better for industrial measurement?
Neither option is automatically better for industrial measurement; the correct choice depends on temperature range, qualification, availability, and required electrical limits. The LT1001ACH and LT1001CH are closely related TO-5 precision-amplifier options, but suffix-specific conditions in the Analog Devices LT1001 product-selection table determine suitability. For an industrial design, compare the required environmental class and operating temperature before treating one as a drop-in substitution.
Where to buy LT1001ACH online?
Use the Request a Quote form on this page to request LT1001ACH availability, current lead time, and the appropriate order quantity. The form is the preferred route for an exact-MPN sourcing request because it can account for package, quantity, and delivery requirements. Confirm the returned manufacturer part number and any date-sensitive availability information before releasing a purchase order.
What is the price of LT1001ACH?
Use the Request a Quote form on this page for the current LT1001ACH price and quantity availability. Pricing for this part can depend on order quantity, inventory, and delivery conditions, so a static amount may not represent the final quotation. Include the required quantity, target package form, and delivery location with the request to obtain an actionable commercial response.
What is the lead time for LT1001ACH?
Request the current LT1001ACH lead time through the Request a Quote form on this page. Lead time can change with inventory, order quantity, and fulfillment conditions, so it should be confirmed for the exact MPN rather than estimated from another LT1001 variant. Provide the planned annual and prototype quantities to help establish an appropriate supply plan.
Is LT1001ACH in stock?
Current LT1001ACH stock should be checked through the Request a Quote form on this page. Because availability is time-sensitive and can vary with order quantity, use the form for the exact MPN and required quantity. The form response is the appropriate source for a current scheduling commitment and any lot or traceability requirements.
What is the best Analog Devices equivalent for LT1001ACH?
The best Analog Devices equivalent is the LT1001 family option whose ordering suffix provides the required temperature class, qualification, electrical limits, and availability. LT1001AH, LT1001BH, and LT1001CH are candidates to compare because they share the same precision-amplifier family and 8-pin TO-5 package. The exact ordering table in the Analog Devices LT1001 datasheet must be checked before treating any of them as a drop-in replacement.

工程參考資料,適用於 LT1001ACH — 比較、設計指引及合規資訊。

選型指南

Choose the LT1001ACH when the design needs a single precision operational amplifier in an 8-pin TO-5 package and can operate within the device's verified supply, common-mode, output, and temperature limits. It is particularly appropriate for low-level instrumentation, sensor conditioning, precision buffers, and laboratory or industrial analog modules that already use conventional through-hole amplifier layouts. Consider LT1001AH or LT1001BH when their respective environmental classifications better satisfy the target requirements while retaining the same family footprint. Consider LT1001CH or LT1001CSH when their ordering characteristics better match a commercial deployment or sourcing plan. Mechanical compatibility alone is not sufficient: review the exact ordering table, absolute maximum ratings, electrical characteristics, and qualification conditions before approving any substitution.

與替代品比較

參數 本產品 LT1001AH LT1001BH LT1001CH LT1001CSH
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin TO-5 8-pin TO-5 8-pin TO-5 8-pin TO-5 8-pin TO-5
Product Type Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

主要差異化特點

  • Wide bipolar supply capability in a conventional precision-op-amp package (對比LT1001CH)
  • Direct family-level mechanical interchangeability (對比LT1001AH)
  • Single-circuit precision format supports focused analog designs (對比LT1001BH)

設計說明

Place the supply-bypass capacitors directly beside the LT1001ACH power pins and connect their ground returns to the quiet analog ground region. Keep the feedback resistors and their input node compact because parasitic resistance and capacitance can alter closed-loop gain and stability. Route the non-inverting input away from supply-current paths and switching nodes. The 8-pin TO-5 footprint must follow the manufacturer's pin drawing exactly because offset-null and no-connect positions are not interchangeable with those of a generic eight-pin amplifier.

Do not select a replacement solely by the TO-5 outline. Confirm that the candidate uses the same pin numbers for the inverting input, non-inverting input, output, positive supply, negative supply, offset null, and unused position. Then verify the required gain, common-mode input range, output swing, input bias current, offset voltage, stability, and operating-temperature class. A suffix change within the LT1001 family can alter environmental classification even though the mechanical footprint and core amplifier function remain the same.

For small-signal measurement designs, treat offset voltage, bias-current-generated error, noise, and drift as a combined error budget rather than optimizing gain alone. Calculate the bias-current contribution using the total resistance seen by each input, and compare it with the signal source impedance. Keep source impedances balanced where possible to reduce offset-current imbalance. At high closed-loop gain, use the manufacturer's compensation and stability guidance and evaluate the complete feedback network rather than relying only on the nominal gain-bandwidth product.

The ±22 V rating is an absolute supply capability, not a recommendation to operate at the limit. Select rail combinations that keep input common-mode voltage, output swing, and internal dissipation within their respective limits. Check the load current and voltage-drop contribution across the TO-5 leads, and provide adequate copper or thermal conduction in the intended assembly. Use separate routing or filtering if the amplifier shares a supply rail with switching converters, motors, or other high-current switching loads.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit environmental or material-compliance declaration for the exact LT1001ACH ordering code was identified. Compliance must be confirmed with Analog Devices or the authorized supply chain before qualification.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LT1001ACH datasheet LT1001ACH pinout LT1001ACH datasheet pdf LT1001ACH equivalent LT1001ACH replacement LT1001ACH vs LT1001CH LT1001ACH TO-5 footprint LT1001ACH precision op amp Analog Devices LT1001ACH LT1001ACH price LT1001ACH stock LT1001ACH instrumentation amplifier LT1001ACH TO-5 pinout

相關元件與詞彙

Analog Devices LT1001ACH LT1001AH LT1001BH LT1001CH LT1001CSH precision operational amplifier operational amplifier amplifier IC analog integrated circuit semiconductor voltage-feedback amplifier input offset voltage input bias current common-mode input range output voltage swing gain-bandwidth product slew rate instrumentation amplifier sensor signal conditioning active filter precision voltage reference buffer 8-pin TO-5 TO-5 package through-hole package
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情