Analog Devices

LT1124CJ8 - Dual Precision Op Amp | Analog Devices

Teilenummer: LT1124CJ8 ✗ Abgekündigt
±22 V Vdss Lower than OP-27 Id 8-pin CERDIP Package
MOQ: 1 |

LT1124CJ8 Übersicht

Analog Devices LT1124CJ8 is a dual, low-noise, high-speed precision operational amplifier with two independent amplifier circuits in an 8-pin CERDIP package. The device provides higher gain, slew rate, and bandwidth than the industry-standard OP-27 and competing OP-270/OP-470 families, while offering lower input bias current and input offset current than the OP-27 and lower offset voltage and noise than the OP-270/OP-470. Its ±22 V supply capability supports a broad range of precision signal-conditioning, instrumentation, and audio applications.

An operational amplifier is a high-gain differential amplifier used to amplify small signals, buffer sensors, implement active filters, and serve as the central active element in control and measurement circuits. The LT1124 belongs to the operational-amplifier hierarchy within analog signal-chain ICs, combining high open-loop gain, low offset voltage, low noise, and fast slew performance in one dual-amplifier package.

The LT1124 family is designed for applications requiring more precision and speed than conventional general-purpose amplifiers. Analog Devices identifies higher gain, slew rate, and bandwidth than the OP-27 as principal family advantages. Relative to the OP-27, the LT1124 also provides lower input bias current and input offset current. Relative to the OP-270 and OP-470, it offers lower offset voltage and lower noise.

Two amplifiers in one package reduce external component count and board area when a circuit requires matched dual signal paths. Typical uses include instrumentation amplifiers, low-level sensor preamplifiers, precision filters, audio preamplification, and reference or measurement chains. The ceramic DIP package supports through-hole construction and is suitable for legacy industrial, test, and measurement equipment where leaded packages remain practical.

The ±22 V operating range permits operation from conventional positive, negative, or split supply rails, subject to the complete device limits in the Analog Devices datasheet. Applications should also preserve adequate input common-mode range, output swing, stability compensation, and output-load capability for the selected feedback network.

For PCB design, place the power and ground pins directly on the supply planes, keep feedback components close to the relevant amplifier inputs, and route sensitive input nodes away from switching nodes and high-current return paths. Because the LT1124CJ8 is a through-hole CERDIP device, check connector spacing, hole pattern, and mechanical clearance before finalizing a board revision.

This product page organizes the LT1124CJ8 specifications, package information, sourcing path, and application guidance. It also distinguishes verified performance claims from unspecified electrical details that should be confirmed in the manufacturer datasheet before precision design work is released for production.

Drop-in-Alternativen für LT1124CJ8 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

LT1124CJ8 Grenzwerte & elektrische Eigenschaften

Amplifier Type General-purpose operational amplifier
Number of Circuits 2 circuits
Number of Amplifiers 2 amplifiers
Supply Voltage Range ±22 V
Gehäuse 8-pin CERDIP
Montageart Through-hole
Temperature Grade Commercial
Gain Higher than OP-27
Slew Rate Higher than OP-27
Gain-Bandwidth Product Higher than OP-27
Input Bias Current Lower than OP-27
Input Offset Current Lower than OP-27
Input Offset Voltage Lower than OP-270/OP-470
Noise Lower than OP-270/OP-470

LT1124CJ8 8-pin cerdip Pinbelegungsleitfaden

Pinbelegung für LT1124CJ8 (8-pin cerdip-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LT1124CJ8 im 8-pin cerdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LT1124CJ8.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LT1124CJ8 ist geeignet für 6 Anwendungs: Precision Instrumentation Amplification, Low-Noise Audio Preamplification, Sensor Signal Conditioning, Active Precision Filtering, Laboratory Measurement Front End, Precision Reference Buffering.

🏭

Precision Instrumentation Amplification

The LT1124CJ8 suits low-level instrumentation because its two amplifier channels provide higher gain, slew rate, and bandwidth than the OP-27, together with lower input bias current and input offset current. Each channel can form a gain stage or active-feedback element around sensors with relatively high source impedance. Compared with the OP-270 and OP-470, the LT1124 also offers lower offset voltage and noise. Check the source impedance, common-mode range, and feedback-network limits before committing the circuit, since the through-hole CERDIP footprint also requires careful mechanical clearance around the device.

🎧

Low-Noise Audio Preamplification

The LT1124CJ8 can serve as a dual audio preamplifier for low-level source signals because the LT1124 family provides higher gain, slew rate, and bandwidth than the OP-27. Analog Devices also identifies lower noise than the OP-270 and OP-470 families, which is useful when preserving small signal detail before a larger audio output stage. Use each channel independently or configure them as a differential input amplifier. Verify the actual noise and gain-bandwidth figures in the family datasheet, and keep the sensitive input routing short and away from switching-power connections.

🧩

Sensor Signal Conditioning

The LT1124CJ8 is appropriate for conditioning low-amplitude sensor outputs where input bias current and offset current can create meaningful measurement errors. Its documented input bias current and input offset current are lower than those of the OP-27, while gain, slew rate, and bandwidth are higher, allowing a compact two-channel conditioning stage with useful small-signal response. A resistive or active filter can follow each amplifier to remove out-of-band noise. Confirm sensor source impedance, signal bandwidth, input common-mode range, and the selected feedback components against the manufacturer limits before production release.

🔧

Active Precision Filtering

The LT1124CJ8 can implement active filters and frequency-shaping networks where the LT1124 family's higher gain, slew rate, and bandwidth relative to the OP-27 provide useful operating margin. The dual circuit count supports two related filter sections or a state-variable-style implementation when component values and stability conditions permit. Lower input bias current and input offset current help reduce errors with high-impedance networks, while lower offset voltage and noise than the OP-270 and OP-470 families can improve low-level filter accuracy. Verify compensation requirements, gain tolerance, and maximum signal amplitude before selecting final resistor and capacitor values.

🖥️

Laboratory Measurement Front End

The LT1124CJ8 is well suited to laboratory and test-equipment front ends that amplify low-level signals while preserving accuracy through a precision measurement chain. Its higher gain, slew rate, and bandwidth relative to the OP-27 can help preserve signal amplitude and phase margin, and its lower bias and offset currents reduce error from high-impedance probes. The two amplifiers may condition two measurement channels or form the active elements of a differential circuit. Choose feedback components and decoupling carefully, and verify the ceramic-DIP footprint against the intended instrument chassis or PCB.

⚡

Precision Reference Buffering

The LT1124CJ8 can buffer a low-level reference voltage or drive a controlled analog node when the application needs more gain, bandwidth, and slew rate than an OP-27 implementation. Its lower input bias current and offset current are helpful when the reference source has appreciable impedance, while the reduced offset voltage and noise relative to the OP-270 and OP-470 families can improve the integrity of the buffered result. Confirm the output-current capability, capacitive-load stability, output swing, and reference-source impedance in the datasheet. The ±22 V supply capability permits use around conventional split analog rails when all other operating limits are satisfied.

Zusammenfassung der empfohlenen Produkte

LT1124 Same dual precision operational-amplifier family Verwendet in: Precision Instrumentation Amplification, Sensor Signal Conditioning, Active Precision Filtering, Precision Reference Buffering LT1125 Quad member of the LT1124/LT1125 family Verwendet in: Precision Instrumentation Amplification, Low-Noise Audio Preamplification, Active Precision Filtering, Laboratory Measurement Front End MC3403DR Texas Instruments Verwendet in: Precision Instrumentation Amplification, Sensor Signal Conditioning, Active Precision Filtering, Laboratory Measurement Front End AK4495EQ AKM (Asahi Kasei Microdevices) Verwendet in: Low-Noise Audio Preamplification, Precision Reference Buffering AK4490EN AKM (Asahi Kasei Microdevices) Verwendet in: Low-Noise Audio Preamplification MAX3221IPWR Texas Instruments Verwendet in: Sensor Signal Conditioning TS974IDT STMicroelectronics Verwendet in: Laboratory Measurement Front End, Precision Reference Buffering
What is the LT1124CJ8?
The LT1124CJ8 is a dual general-purpose operational amplifier from Analog Devices, with two amplifier circuits in an 8-pin CERDIP package. According to the Analog Devices LT1124/LT1125 datasheet 11245ff.pdf, the family offers higher gain, slew rate, and bandwidth than the OP-27 while reducing input bias current and input offset current relative to that device. The dual architecture suits precision signal-conditioning, instrumentation, audio, and measurement circuits that require two active amplifier channels.
What are the key specifications of LT1124CJ8 that engineers should know?
The LT1124CJ8 combines two precision operational-amplifier circuits, ±22 V operation, and an 8-pin CERDIP package. The Analog Devices LT1124/LT1125 datasheet 11245ff.pdf identifies higher gain, slew rate, and bandwidth than the OP-27, plus lower input bias current and input offset current. It also specifies lower offset voltage and lower noise than the OP-270 and OP-470 families, making it appropriate for low-level signal chains where accuracy and noise contribute directly to measurement performance.
Where can I download the LT1124CJ8 datasheet PDF?
The official LT1124CJ8 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/11245ff.pdf. The document is the combined LT1124/LT1125 family datasheet and covers the dual LT1124 and quad LT1125 precision operational amplifiers. The manufacturer product page at https://www.analog.com/en/products/lt1124.html provides the related product overview and links to the same technical documentation.
Where can I find the LT1124CJ8 pinout?
Use the pin-configuration and package drawings in the Analog Devices LT1124/LT1125 datasheet 11245ff.pdf to identify every connection on the 8-pin CERDIP. The LT1124CJ8 is a through-hole dual amplifier, so its physical pin arrangement must be matched directly to the PCB footprint. Do not infer the pin map from the low-power 8-pin SO version of the LT1124 family; the leaded ceramic package and surface-mount package have different physical arrangements.
How does the LT1124CJ8 compare with the OP-27?
The LT1124CJ8 is designed to outperform the OP-27 in several key areas. According to the Analog Devices LT1124/LT1125 datasheet 11245ff.pdf, it provides higher gain, higher slew rate, and higher bandwidth, while also reducing input bias current and input offset current. These changes matter most in precision measurement paths where offset, bias-current error, and small-signal bandwidth determine the useful accuracy of the amplifier.
What is the difference between LT1124CJ8 and LT1124CN8#PBF?
The LT1124CJ8 is an 8-pin CERDIP variant, whereas LT1124CN8#PBF is listed as an 8-pin PDIP variant. Both provide the dual LT1124 amplifier function, but their physical packages are not identical for a strict drop-in PCB replacement. Verify lead spacing, ceramic-versus-plastic construction, row geometry, and the manufacturer's package drawing before treating either ordering code as interchangeable.
When should I choose LT1124CJ8 over a general-purpose dual op amp?
Choose the LT1124CJ8 when the design needs the LT1124 family's documented improvements over the OP-27, including higher gain, slew rate, and bandwidth, together with reduced input bias current and input offset current. It is especially useful for low-level instrumentation, precision filters, and sensor interfaces where those characteristics affect signal fidelity. A standard general-purpose dual amplifier may be sufficient when those precision improvements are unnecessary and absolute minimum cost is the dominant requirement.
Is LT1124CJ8 suitable for precision instrumentation and sensor signals?
Yes, the LT1124CJ8 is suitable for low-level precision instrumentation because its input bias current and input offset current are lower than those of the OP-27, while its gain, slew rate, and bandwidth are higher. According to the Analog Devices LT1124/LT1125 datasheet 11245ff.pdf, it also has lower offset voltage and noise than the OP-270 and OP-470 families. Sensor excitation and source impedance should still be checked against the amplifier's input-current and common-mode requirements.
What can replace the LT1124CJ8?
A drop-in replacement for the LT1124CJ8 must use the same 8-pin CERDIP footprint, provide the same dual-amplifier pin arrangement, and remain compatible with the circuit's supply voltage, common-mode range, output swing, stability requirements, and frequency response. The LT1124CN8#PBF is a related 8-pin PDIP device, but its package construction differs and it is not a strict ceramic-DIP drop-in replacement. PCB changes or a documented pin-compatible substitute should be confirmed before substitution.
Is the LT1124CJ8 the same as an OP-27?
No. The LT1124CJ8 is a dual amplifier in an 8-pin CERDIP package, and its performance differs from the OP-27. The Analog Devices LT1124/LT1125 datasheet 11245ff.pdf states that the LT1124 provides higher gain, slew rate, and bandwidth than the OP-27, as well as lower input bias current and input offset current. A substitution therefore requires a detailed electrical comparison rather than relying on the shared precision-op-amp category.
Where can I buy LT1124CJ8 online?
Use the Request a Quote form on this page to request LT1124CJ8 availability, quotation, and lead time from XAIPART. The component is a commercial-grade, dual, 8-pin CERDIP operational amplifier, and the exact ordering code should be stated on the request to avoid package or suffix ambiguity. Current commercial terms are best confirmed through the quote response rather than through a static price reference.
What is the price of LT1124CJ8?
The current commercial price for LT1124CJ8 is best requested through the Request a Quote form on this page. A legacy unit-price reference is retained separately for internal sourcing continuity, but it does not represent a current quotation, stock commitment, or guaranteed lead time. Submit the exact MPN LT1124CJ8 with your required quantity and packaging needs so the response can be tied to the correct 8-pin CERDIP configuration.
What is the lead time for LT1124CJ8?
Request the current LT1124CJ8 lead time through the Request a Quote form on this page, including the required order quantity, production schedule, and acceptable date-code range. Because this is a leaded ceramic-DIP operational-amplifier ordering code, procurement should explicitly confirm the CJ8 package suffix rather than assuming that every LT1124 variant has the same production status, package availability, or delivery schedule.
Is LT1124CJ8 in stock?
Request current LT1124CJ8 inventory status through the Request a Quote form on this page. The quote response should confirm the quantity available, manufacturing lead time, and exact package designation. Because distributor landing pages may change independently, stock should be treated as a time-sensitive procurement fact rather than a permanent product attribute, and no other seller is recommended for this request.
Does LT1124CJ8 support ±22 V operation?
Yes, the LT1124CJ8 is specified for a ±22 V supply range, according to the LT1124 family technical information shown for the device. The dual amplifier can therefore be used with positive, negative, or split supplies when the remaining input common-mode, output swing, and absolute-maximum requirements are satisfied. Use the complete manufacturer datasheet for rail combinations, input and output limits, compensation, and thermal conditions.
What is the best Analog Devices equivalent for LT1124CJ8?
The closest same-family choice identified for the LT1124CJ8 is the related LT1124 ordering code with a different package or orderable suffix. However, a true drop-in equivalent must preserve the 8-pin CERDIP footprint and dual-amplifier pin arrangement. The LT1124CN8#PBF is an 8-pin PDIP alternative and may be suitable after PCB and qualification review, but it is not a strict ceramic-DIP replacement. Use the manufacturer package drawings for final approval.

Technische Referenzdaten für LT1124CJ8 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the LT1124CJ8 when the design requires a dual precision amplifier in a leaded 8-pin ceramic-DIP package and benefits from the LT1124 family's improvements over the OP-27. Its higher gain, slew rate, and bandwidth are valuable in precision signal conditioning, while reduced input bias current and offset current help when driving high-impedance sensors. Lower offset voltage and noise than the OP-270 and OP-470 families make it attractive for low-level audio and measurement paths. Use the related LT1125 when four amplifier channels are required. Do not substitute the 8-pin PDIP LT1124CN8#PBF without checking the package difference, and do not assume that a generic dual op amp is pin-compatible. For any alternative, verify the footprint, amplifier pinout, supply range, common-mode range, output swing, noise, offset, compensation, and stability requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 8-pin CERDIP
Brand Analog Devices
Amplifier Configuration Dual
Mounting Type Through-hole
Temperature Grade Commercial
Supply Voltage Range ±22 V
Gain Higher than OP-27
Slew Rate Higher than OP-27
Gain-Bandwidth Product Higher than OP-27
Input Bias Current Lower than OP-27
Input Offset Current Lower than OP-27
Input Offset Voltage Lower than OP-270/OP-470
Noise Lower than OP-270/OP-470

Wichtigste Unterscheidungsmerkmale

  • Higher gain, slew rate, and bandwidth than the OP-27 (vs. OP-27)
  • Lower input bias current and input offset current than the OP-27 (vs. OP-27)
  • Lower offset voltage and noise than the OP-270 and OP-470 (vs. OP-270/OP-470)

Designhinweise

Use the package drawing in the Analog Devices LT1124/LT1125 datasheet 11245ff.pdf to establish the PCB hole pattern and lead orientation. The LT1124CJ8 is a ceramic DIP rather than the family's low-power 8-pin SO option, so the two packages must not share a footprint. Confirm ceramic-package height, lead pitch, soldering clearance, and connector spacing before releasing the layout.

Route each amplifier input directly to its feedback and source components, and keep those traces short and away from switching nodes, inductors, and high-current return paths. The LT1124's lower input bias current and offset current than the OP-27 reduce errors from high-impedance sources, but they do not eliminate sensitivity to leakage, contamination, or guard-ring errors. Stable reference grounding and clean supply decoupling remain necessary for low-level measurements.

The device supports a ±22 V supply range, but each rail and total supply must remain within the complete operating limits. Place local supply bypassing close to the power and ground pins, use a low-inductance return path, and account for decoupling interaction at the relevant frequency range. Confirm output swing and common-mode limits for the actual rail voltages rather than treating the nominal maximum as a usable signal range.

Do not assume that an 8-pin dual op amp with a similar function is a drop-in substitute. Pin functions, compensation method, common-mode range, output swing, noise, offset, and package geometry can all affect circuit behavior. Review the LT1124 datasheet's recommended applications and stability guidance, and verify any proposed replacement on both the original PCB and across expected supply, temperature, and load conditions.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The component is identified as a commercial-grade dual operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited manufacturer and distributor information.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

LT1124CJ8 datasheet LT1124CJ8 datasheet pdf LT1124CJ8 pinout LT1124CJ8 equivalent LT1124CJ8 replacement LT1124CJ8 price LT1124CJ8 stock Analog Devices LT1124CJ8 LT1124CJ8 8-pin CERDIP LT1124CJ8 precision op amp LT1124CJ8 instrumentation application LT1124CJ8 vs OP-27 LT1124CJ8 footprint LT1124 dual op amp LT1124CJ8 signal conditioning

Verwandte Bauteile & Begriffe

Analog Devices Linear Technology LT1124CJ8 LT1124 LT1125 LT1124CN8#PBF OP-27 OP-270 OP-470 dual operational amplifier precision operational amplifier analog signal-chain IC input bias current input offset current input offset voltage gain-bandwidth product slew rate 8-pin CERDIP ceramic dual in-line package through-hole package precision instrumentation signal conditioning audio preamplification active filter sensor interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen