LT1124CJ8 - Dual Precision Op Amp | Analog Devices
MPN: LT1124CJ8 ✗ जीवन की समाप्तिLT1124CJ8 अवलोकन
An operational amplifier is a high-gain differential amplifier used to amplify small signals, buffer sensors, implement active filters, and serve as the central active element in control and measurement circuits. The LT1124 belongs to the operational-amplifier hierarchy within analog signal-chain ICs, combining high open-loop gain, low offset voltage, low noise, and fast slew performance in one dual-amplifier package.
The LT1124 family is designed for applications requiring more precision and speed than conventional general-purpose amplifiers. Analog Devices identifies higher gain, slew rate, and bandwidth than the OP-27 as principal family advantages. Relative to the OP-27, the LT1124 also provides lower input bias current and input offset current. Relative to the OP-270 and OP-470, it offers lower offset voltage and lower noise.
Two amplifiers in one package reduce external component count and board area when a circuit requires matched dual signal paths. Typical uses include instrumentation amplifiers, low-level sensor preamplifiers, precision filters, audio preamplification, and reference or measurement chains. The ceramic DIP package supports through-hole construction and is suitable for legacy industrial, test, and measurement equipment where leaded packages remain practical.
The ±22 V operating range permits operation from conventional positive, negative, or split supply rails, subject to the complete device limits in the Analog Devices datasheet. Applications should also preserve adequate input common-mode range, output swing, stability compensation, and output-load capability for the selected feedback network.
For PCB design, place the power and ground pins directly on the supply planes, keep feedback components close to the relevant amplifier inputs, and route sensitive input nodes away from switching nodes and high-current return paths. Because the LT1124CJ8 is a through-hole CERDIP device, check connector spacing, hole pattern, and mechanical clearance before finalizing a board revision.
This product page organizes the LT1124CJ8 specifications, package information, sourcing path, and application guidance. It also distinguishes verified performance claims from unspecified electrical details that should be confirmed in the manufacturer datasheet before precision design work is released for production.
के लिए ड्रॉप-इन विकल्प LT1124CJ8 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंLT1124CJ8 Maximum Ratings और Electrical Characteristics
| Amplifier Type | General-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Number of Amplifiers | 2 amplifiers |
| Supply Voltage Range | ±22 V |
| पैकेज | 8-pin CERDIP |
| माउंटिंग प्रकार | Through-hole |
| Temperature Grade | Commercial |
| Gain | Higher than OP-27 |
| Slew Rate | Higher than OP-27 |
| Gain-Bandwidth Product | Higher than OP-27 |
| Input Bias Current | Lower than OP-27 |
| Input Offset Current | Lower than OP-27 |
| Input Offset Voltage | Lower than OP-270/OP-470 |
| Noise | Lower than OP-270/OP-470 |
LT1124CJ8 8-pin cerdip पिन कॉन्फ़िगरेशन गाइड
LT1124CJ8 (8-pin cerdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LT1124CJ8.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LT1124CJ8 के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Instrumentation Amplification, Low-Noise Audio Preamplification, Sensor Signal Conditioning, Active Precision Filtering, Laboratory Measurement Front End, Precision Reference Buffering.
Precision Instrumentation Amplification
The LT1124CJ8 suits low-level instrumentation because its two amplifier channels provide higher gain, slew rate, and bandwidth than the OP-27, together with lower input bias current and input offset current. Each channel can form a gain stage or active-feedback element around sensors with relatively high source impedance. Compared with the OP-270 and OP-470, the LT1124 also offers lower offset voltage and noise. Check the source impedance, common-mode range, and feedback-network limits before committing the circuit, since the through-hole CERDIP footprint also requires careful mechanical clearance around the device.
अनुशंसित
Low-Noise Audio Preamplification
The LT1124CJ8 can serve as a dual audio preamplifier for low-level source signals because the LT1124 family provides higher gain, slew rate, and bandwidth than the OP-27. Analog Devices also identifies lower noise than the OP-270 and OP-470 families, which is useful when preserving small signal detail before a larger audio output stage. Use each channel independently or configure them as a differential input amplifier. Verify the actual noise and gain-bandwidth figures in the family datasheet, and keep the sensitive input routing short and away from switching-power connections.
अनुशंसित
Sensor Signal Conditioning
The LT1124CJ8 is appropriate for conditioning low-amplitude sensor outputs where input bias current and offset current can create meaningful measurement errors. Its documented input bias current and input offset current are lower than those of the OP-27, while gain, slew rate, and bandwidth are higher, allowing a compact two-channel conditioning stage with useful small-signal response. A resistive or active filter can follow each amplifier to remove out-of-band noise. Confirm sensor source impedance, signal bandwidth, input common-mode range, and the selected feedback components against the manufacturer limits before production release.
अनुशंसित
Active Precision Filtering
The LT1124CJ8 can implement active filters and frequency-shaping networks where the LT1124 family's higher gain, slew rate, and bandwidth relative to the OP-27 provide useful operating margin. The dual circuit count supports two related filter sections or a state-variable-style implementation when component values and stability conditions permit. Lower input bias current and input offset current help reduce errors with high-impedance networks, while lower offset voltage and noise than the OP-270 and OP-470 families can improve low-level filter accuracy. Verify compensation requirements, gain tolerance, and maximum signal amplitude before selecting final resistor and capacitor values.
अनुशंसित
Laboratory Measurement Front End
The LT1124CJ8 is well suited to laboratory and test-equipment front ends that amplify low-level signals while preserving accuracy through a precision measurement chain. Its higher gain, slew rate, and bandwidth relative to the OP-27 can help preserve signal amplitude and phase margin, and its lower bias and offset currents reduce error from high-impedance probes. The two amplifiers may condition two measurement channels or form the active elements of a differential circuit. Choose feedback components and decoupling carefully, and verify the ceramic-DIP footprint against the intended instrument chassis or PCB.
अनुशंसित
Precision Reference Buffering
The LT1124CJ8 can buffer a low-level reference voltage or drive a controlled analog node when the application needs more gain, bandwidth, and slew rate than an OP-27 implementation. Its lower input bias current and offset current are helpful when the reference source has appreciable impedance, while the reduced offset voltage and noise relative to the OP-270 and OP-470 families can improve the integrity of the buffered result. Confirm the output-current capability, capacitive-load stability, output swing, and reference-source impedance in the datasheet. The ±22 V supply capability permits use around conventional split analog rails when all other operating limits are satisfied.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LT1124CJ8 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Package | 8-pin CERDIP |
| Brand | Analog Devices |
| Amplifier Configuration | Dual |
| Mounting Type | Through-hole |
| Temperature Grade | Commercial |
| Supply Voltage Range | ±22 V |
| Gain | Higher than OP-27 |
| Slew Rate | Higher than OP-27 |
| Gain-Bandwidth Product | Higher than OP-27 |
| Input Bias Current | Lower than OP-27 |
| Input Offset Current | Lower than OP-27 |
| Input Offset Voltage | Lower than OP-270/OP-470 |
| Noise | Lower than OP-270/OP-470 |
मुख्य विशेषताएँ
- Higher gain, slew rate, and bandwidth than the OP-27 (बनामOP-27)
- Lower input bias current and input offset current than the OP-27 (बनामOP-27)
- Lower offset voltage and noise than the OP-270 and OP-470 (बनामOP-270/OP-470)
डिज़ाइन नोट्स
Use the package drawing in the Analog Devices LT1124/LT1125 datasheet 11245ff.pdf to establish the PCB hole pattern and lead orientation. The LT1124CJ8 is a ceramic DIP rather than the family's low-power 8-pin SO option, so the two packages must not share a footprint. Confirm ceramic-package height, lead pitch, soldering clearance, and connector spacing before releasing the layout.
Route each amplifier input directly to its feedback and source components, and keep those traces short and away from switching nodes, inductors, and high-current return paths. The LT1124's lower input bias current and offset current than the OP-27 reduce errors from high-impedance sources, but they do not eliminate sensitivity to leakage, contamination, or guard-ring errors. Stable reference grounding and clean supply decoupling remain necessary for low-level measurements.
The device supports a ±22 V supply range, but each rail and total supply must remain within the complete operating limits. Place local supply bypassing close to the power and ground pins, use a low-inductance return path, and account for decoupling interaction at the relevant frequency range. Confirm output swing and common-mode limits for the actual rail voltages rather than treating the nominal maximum as a usable signal range.
Do not assume that an 8-pin dual op amp with a similar function is a drop-in substitute. Pin functions, compensation method, common-mode range, output swing, noise, offset, and package geometry can all affect circuit behavior. Review the LT1124 datasheet's recommended applications and stability guidance, and verify any proposed replacement on both the original PCB and across expected supply, temperature, and load conditions.
अनुपालन जानकारी
The component is identified as a commercial-grade dual operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited manufacturer and distributor information.