Analog Devices

LT1991HMS - 100uA Gain-Selectable Amplifier | Analog Devices

Teilenummer: LT1991HMS ✓ Aktiv
50 uV Vdss 100 uA at 5 V supply Id MSOP-10, plastic Package
MOQ: 1 |

LT1991HMS Übersicht

The Analog Devices LT1991HMS is a precision, 100uA gain-selectable amplifier integrated with eight precision resistors in a 10-pin MSOP package. The device combines a precision operational amplifier with an internal resistor network to provide selectable gains from -13 to 14 with gain accuracy of 0.04%, while operating from any supply voltage from 2.7V to 36V. It is designed for low-power instrumentation where accurate signal conditioning is required without external gain-setting resistors.

A programmable or gain-selectable amplifier is an analog signal-conditioning device that adjusts the relationship between an input voltage and an output voltage using an internal precision resistor network. The LT1991 belongs to the operational-amplifier family and sits within the broader hierarchy of amplifiers, analog ICs, and signal-conditioning semiconductors. Its internal resistor matching is particularly useful for difference-amplifier and differential-measurement circuits where common-mode rejection and gain accuracy are important.

The LT1991HMS features a maximum input offset voltage of 50uV and a gain-bandwidth product of 560kHz. It draws only 100uA of supply current on a 5V supply, making it suitable for battery-operated instruments and low-leakage measurement systems. The output can swing to within 40mV of either supply rail, providing useful headroom for single-supply and dual-supply signal chains. The device is supplied in an MSOP-10 package with an operating temperature range of -40C to +125C.

The internal precision-resistor architecture eliminates the external resistor ratios normally required to establish accurate amplifier gains. This reduces component count, resistor-matching error, and board-space requirements in measurement front ends. The amplifier's low supply current is valuable when the input source itself has limited drive capability, while the wide supply range supports industrial, instrumentation, and process-control systems. Its 560kHz gain-bandwidth product is adequate for low- to moderate-frequency precision signal conditioning rather than high-speed waveform processing.

Typical applications include differential sensor measurement, current-shunt monitoring, low-power laboratory instrumentation, portable measurement equipment, gain-programmed analog front ends, and industrial control circuits. The LT1991 is particularly well suited to difference-amplifier use because the matched internal resistors improve common-mode rejection when both inputs are close in voltage.

For a new design, verify the selected gain code, input common-mode range, output swing, and bias-current requirements against the pin description table in the manufacturer datasheet. Place the device close to the signal source, use a clean low-noise supply, and account for input bias-current errors when the source impedance is high. The MSOP-10 footprint requires careful decoupling and thermal-layout review for sustained operation at the upper end of the temperature range.

Drop-in-Alternativen für LT1991HMS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

LT1991HMS-PBF

✅ Drop-In
📦 MSOP-10
Same LT1991HMS device family and MSOP-10 package; differs primarily in lead-free ordering notation, with no quantified electrical difference stated in the available listing.

📋 Referenzalternative (nicht im Katalog)

LT1991HMS Grenzwerte & elektrische Eigenschaften

Product Type Gain-selectable precision amplifier
Architecture Operational amplifier with eight internal precision resistors
Gain Range -13 to +14
Gain Accuracy 0.04%
Maximum Input Offset Voltage 50 uV
Gain-Bandwidth Product 560 kHz
Supply Voltage Range 2.7 V to 36 V
Versorgungsstrom 100 uA at 5 V supply
Output Swing Within 40 mV of either supply rail
Common-Mode Rejection 100 dB
Slew Rate 0.1200 V/us
Input Bias Current 0.0150 uA
Betriebstemperaturbereich -40C to +125C
Gehäuse MSOP-10, plastic
Terminal Count 10
Montageart Surface mount

LT1991HMS msop-10, plastic Pinbelegungsleitfaden

Pinbelegung für LT1991HMS (msop-10, plastic-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LT1991HMS im msop-10, plastic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LT1991HMS.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LT1991HMS ist geeignet für 6 Anwendungs: Precision Difference Amplification, Current-Shunt Monitoring, Portable Instrument Signal Conditioning, Industrial Sensor Interface, Low-Power Process-Control Front End, Low-Frequency Analog Measurement.

⚡

Precision Difference Amplification

The LT1991HMS is well suited to differential measurement because its eight internal precision resistors provide selectable gains from -13 to +14 with 0.04% gain accuracy. Place it in a difference-amplifier configuration when two nearby voltages must be amplified while suppressing common-mode error. The 100dB common-mode rejection specification supports accurate measurements of small differential signals, while 100uA supply current at 5V helps maintain low power consumption. Check the selected gain code and input common-mode limits in the manufacturer datasheet before finalizing the layout.

🔧

Current-Shunt Monitoring

Use the LT1991HMS to amplify the small voltage generated by a current shunt in battery systems, power converters, and motor-control circuits. The 50uV maximum input offset voltage helps preserve measurement accuracy with low-amplitude shunt signals, while the internal resistor network removes the need for an external gain resistor pair. The 560kHz gain-bandwidth product is suitable for slowly changing or moderate-bandwidth current measurements rather than high-frequency pulse monitoring. Use Kelvin routing and verify input bias-current errors for high-resistance sense paths.

📱

Portable Instrument Signal Conditioning

The LT1991HMS fits portable measurement instruments where every milliamp of supply current and every external component affects battery life or board area. Its 100uA supply current at 5V supports low-power operation, while the internal precision resistors provide a selectable gain range from -13 to +14 without external gain-setting resistors. The 2.7V to 36V supply range also allows the same device family to be used across low-voltage and higher-voltage instrument architectures. Select the gain code and bypass capacitor placement according to the manufacturer application guidance.

🏭

Industrial Sensor Interface

The LT1991HMS can condition low-level industrial sensor signals when accurate scaling and low power are more important than high bandwidth. The 0.04% gain accuracy of the internal resistor network improves scale-factor repeatability, and the 100dB common-mode rejection helps reject unwanted voltage common to both inputs. The device accepts supplies from 2.7V to 36V, making it adaptable to multiple industrial signal-chain supply plans. Confirm the sensor's output range, common-mode limits, and grounding arrangement before using the amplifier near high-energy equipment.

🖥️

Low-Power Process-Control Front End

For low-power process-control modules, the LT1991HMS provides a compact way to scale small analog inputs with limited external circuitry. Its integrated precision resistor network supports stable gain without hand-matched external components, and the 100uA supply current at 5V helps limit standby consumption. The wide 2.7V to 36V operating range supports shared supply rails in mixed-signal equipment. Keep the input path short, provide local supply bypassing, and verify that the selected gain remains within the amplifier's output-swing limits.

📺

Low-Frequency Analog Measurement

The LT1991HMS is appropriate for low-frequency analog measurement systems that need precise gain selection rather than high closed-loop speed. Its 560kHz gain-bandwidth product supports measurement and control bandwidths below the amplifier's high-frequency limit, while the 50uV maximum input offset voltage helps reduce signal-path error. Use it ahead of an ADC or control input when the signal source can drive the amplifier's bias current. For applications requiring wider bandwidth, more output drive, or adjustable external gain, compare a dedicated precision op amp instead.

Zusammenfassung der empfohlenen Produkte

LT1991HMS-PBF Same LT1991 amplifier family and MSOP-10 package Verwendet in: Precision Difference Amplification, Current-Shunt Monitoring, Portable Instrument Signal Conditioning, Industrial Sensor Interface, Low-Power Process-Control Front End, Low-Frequency Analog Measurement
What is the LT1991HMS?
The LT1991HMS is a precision, 100uA gain-selectable amplifier from Analog Devices. It combines an operational amplifier with eight internal precision resistors, providing selectable gains from -13 to +14 with gain accuracy of 0.04% in a 10-pin MSOP package. According to the manufacturer datasheet, the device is intended for accurate amplification without external gain-setting components.
What is the operating voltage range of LT1991HMS?
The LT1991HMS operates from 2.7V to 36V. According to the manufacturer datasheet, this wide supply range allows the amplifier to be used in both low-voltage portable systems and higher-voltage industrial instrumentation. The supply current is 100uA on a 5V supply, making the device suitable for low-power measurement circuits.
What is the gain accuracy of LT1991HMS?
The LT1991HMS provides selectable gains from -13 to +14 with gain accuracy of 0.04%. The manufacturer identifies the internal precision-resistor network as the key to this accuracy. This is useful when the application depends on predictable signal scaling without selecting and calibrating external precision resistors.
How much current does the LT1991HMS consume?
The LT1991HMS consumes 100uA of supply current on a 5V supply, according to the manufacturer datasheet. This low quiescent current helps reduce power consumption in portable instruments, battery-powered monitors, and other systems where the amplifier must operate continuously from a limited power budget.
Can LT1991HMS operate from a single supply?
The LT1991HMS can operate from a 2.7V to 36V supply, including single-supply systems. The output swings to within 40mV of either supply rail, so the usable output range must be checked against the signal amplitude and load. The datasheet is the appropriate reference for input and output limits.
What is the bandwidth of the LT1991HMS?
The LT1991HMS has a gain-bandwidth product of 560kHz. This makes it suitable for low- and moderate-frequency precision signal conditioning, including sensor signals, current measurements, and low-frequency analog control paths. It is not intended to replace high-speed amplifiers in wideband waveform applications.
Is LT1991HMS suitable for difference amplifier applications?
Yes. Analog Devices specifically identifies the LT1991 as well suited to difference-amplifier use because its internal resistors are accurately matched. The matched network improves common-mode rejection when the two input voltages are close together. The manufacturer datasheet also lists a 100dB common-mode rejection specification.
Where can I download the LT1991HMS datasheet PDF?
The official LT1991HMS datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/1991fh.pdf. Use the manufacturer's document for the complete electrical characteristics, gain-selection table, pin descriptions, and recommended application circuits.
Where can I find the LT1991HMS pinout?
The LT1991HMS pinout is shown in the manufacturer datasheet's pin-description and package-drawing sections. The component uses a 10-pin MSOP package. Because the provided technical listing does not reproduce the individual pin names, use the official datasheet rather than inferring connections from a generic MSOP drawing.
What can replace the LT1991HMS?
The LT1991HMS-PBF is the closest same-brand package-oriented alternative identified in the manufacturer-family listing, using the same LT1991 amplifier and MSOP-10 package with a lead-free finish. A universal drop-in replacement cannot be confirmed from the available cross-reference results, so verify pin assignments, gain codes, voltage limits, and electrical limits before substitution.
Is LT1991HMS the same as LT1991HMS-PBF?
LT1991HMS and LT1991HMS-PBF refer to the same LT1991HMS device family with different ordering or termination notation. The Analog Devices product listing identifies LT1991HMS-PBF as the programmable-gain amplifier in a 10-pin MSOP package. Confirm the ordering code and lead-free termination required by your assembly process.
LT1991HMS versus a conventional external-resistor amplifier: which is better?
The LT1991HMS is better when gain accuracy, low power, and reduced external-component count are priorities. Its eight internal precision resistors provide selectable gains from -13 to +14 with 0.04% accuracy, while a conventional amplifier uses external resistors whose ratio and tolerance determine scale-factor accuracy. The trade-off is that the available gain set is fixed by the internal network.
When should I choose the LT1991HMS over a general-purpose op amp?
Choose the LT1991HMS when the circuit needs a selectable, accurate gain with very low supply current and no external resistor network. Its 100uA current at 5V and integrated precision resistors are valuable in portable instrumentation. A general-purpose op amp is preferable when arbitrary gain, wider bandwidth, higher output current, or lower cost is the dominant requirement.
What applications use the LT1991HMS?
The LT1991HMS is used for precision differential measurement, current-shunt monitoring, portable laboratory equipment, sensor interfaces, and industrial signal-conditioning circuits. Its internal matched resistors are particularly useful in difference-amplifier layouts, while its 560kHz gain-bandwidth product supports low- and moderate-frequency analog signals.
What design limits should I check for LT1991HMS?
Check the input common-mode range, output swing, supply voltage, gain setting, input bias current, and temperature range against the manufacturer datasheet. The output is specified to swing within 40mV of either supply rail, and high-impedance sources can create offset errors from the 0.0150uA input bias current. Decouple the supply close to the device and use the specified gain-selection connections.
Is LT1991HMS in stock and what is its lead time?
Current stock, price, and lead time should be requested through the Request a Quote form on this page. The product listing identifies the LT1991HMS-PBF as available for ordering, but it does not provide a stable inventory quantity or guaranteed delivery schedule. Submit the exact MPN, quantity, and required termination to obtain current commercial terms.
Where can I buy LT1991HMS online?
Use the Request a Quote form on this page to request the LT1991HMS and confirm current availability, quantity, and delivery expectations. The product is manufactured by Analog Devices and is offered in the MSOP-10 package. Provide the exact ordering suffix required by your PCB assembly and documentation process.
What is the price of LT1991HMS?
The LT1991HMS price is best obtained through the Request a Quote form on this page, where the current commercial terms can be matched to the required quantity and package suffix. Prices can change with volume, market conditions, and ordering configuration, so request a quote rather than relying on a stale catalog amount.

Technische Referenzdaten für LT1991HMS – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the LT1991HMS when the design needs accurate selectable gain, low supply current, and minimal external resistor content. Its internal precision network is especially useful in difference amplifiers, shunt monitors, and portable instrumentation, with selectable gains from -13 to +14 and 0.04% gain accuracy. The LT1991HMS-PBF is the closest identified same-brand package alternative for assemblies requiring the lead-free ordering termination. A general-purpose op amp may be preferable when arbitrary gain, higher bandwidth, greater output drive, or lower cost matters more than integrated gain accuracy. A dedicated precision amplifier with very low offset and bias current may also be preferable for high-impedance sources.

Vergleich mit Alternativen

Parameter Dieses Produkt LT1991HMS-PBF
Package MSOP-10 MSOP-10
Brand Analog Devices Analog Devices
Product Type Gain-selectable precision amplifier Gain-selectable precision amplifier
Supply Voltage Range 2.7 V to 36 V 2.7 V to 36 V
Supply Current 100 uA at 5 V supply 100 uA at 5 V supply
Gain Range -13 to +14 -13 to +14
Gain Accuracy 0.04% 0.04%
Gain-Bandwidth Product 560 kHz 560 kHz
Maximum Input Offset Voltage 50 uV 50 uV
Operating Temperature Range -40C to +125C -40C to +125C

Wichtigste Unterscheidungsmerkmale

  • Integrated precision gain network (vs. General-purpose external-resistor amplifier)
  • Very low supply current (vs. General-purpose precision op amp)
  • Difference-amplifier optimization (vs. Discrete resistor difference amplifier)

Designhinweise

Place the LT1991HMS close to the signal source and keep input traces short to minimize susceptibility to noise and input-bias-current errors. Route the inputs as a closely matched pair when the device is used as a difference amplifier. Place the supply bypass capacitor near the power pin and maintain a compact return path to the ground reference.

Do not assume that any close signal gain is available. The LT1991 uses selectable internal resistors and supports gains from -13 to +14, so verify the gain table in the manufacturer datasheet. Also check that the input common-mode voltage and the required output level remain inside the device limits, especially with a 2.7V supply.

The stated 100uA supply current is specified at a 5V supply, so it should not be treated as a constant over the entire 2.7V to 36V range. Calculate the actual supply power for the selected operating point and use the lowest supply voltage that still provides adequate input and output headroom. Add local decoupling and verify the regulator's transient behavior.

For high-impedance sources, evaluate the input-bias-current contribution. The listed input bias current is 0.0150uA, which can create an error across a large source impedance even when the amplifier's 50uV offset specification is acceptable. Use a lower-impedance source, account for input capacitance, or choose a different amplifier when the source is extremely high impedance.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product listings identify LT1991HMS and LT1991HMS-PBF but do not explicitly state the requested compliance attributes. The PBF ordering notation should not be treated as independent proof of lead-free or halogen-free status without the manufacturer declaration.

Ähnliche Suchanfragen

LT1991HMS datasheet LT1991HMS datasheet pdf LT1991HMS pinout LT1991HMS specifications LT1991HMS equivalent LT1991HMS replacement LT1991HMS drop-in replacement LT1991HMS cross reference LT1991HMS footprint LT1991HMS spice model LT1991HMS price LT1991HMS stock Analog Devices LT1991HMS LT1991HMS difference amplifier LT1991HMS vs LT1991HMS-PBF

Verwandte Bauteile & Begriffe

Analog Devices LT1991HMS LT1991HMS-PBF Precision gain-selectable amplifier Operational amplifier Gain-selectable amplifier Analog IC Signal-conditioning semiconductor MSOP-10 MSOP package Surface-mount package Internal precision resistor network Difference amplifier Common-mode rejection ratio CMRR Gain-bandwidth product GBW Input offset voltage Input bias current Quiescent current Low-power instrumentation Current-shunt monitoring Industrial sensor interface RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen