Analog Devices

MAX232AMLP - 2/2 RS-232 Transceiver, 5V | Analog Devices

Teilenummer: MAX232AMLP ✓ Aktiv
+5 V Vdss V.28 and V.24 Rds(on) 20-LCC ceramic package Package
MOQ: 1 |

MAX232AMLP Übersicht

The Analog Devices MAX232AMLP is a +5 V-powered, dual-driver and dual-receiver RS-232 transceiver packaged in a 20-pin ceramic LCC package measuring 8.9 mm by 8.9 mm. It converts between TTL/CMOS logic levels and EIA/TIA-232E, V.28, and V.24 serial-interface levels, providing two transmit channels and two receive channels in one device.

An RS-232 transceiver is a line-interface IC that bridges the logic-voltage domain used by digital controllers and the bipolar voltage domain used by RS-232 equipment. The MAX232A belongs to the MAX220 through MAX249 family of multichannel line drivers and receivers. Its integrated dual charge-pump voltage converters generate the positive and negative voltages required by RS-232 without requiring an external ±12 V supply.

Key features include two RS-232 drivers, two RS-232 receivers, operation from a single +5 V supply, and support for EIA/TIA-232E as well as V.28 and V.24 interfaces. The MAX232AMLP is appropriate when a system must transmit and receive asynchronous serial data between a 5 V logic circuit and an RS-232 port. Its through-hole ceramic package also supports applications that favor a rugged, leaded component over a surface-mount package.

The device combines charge-pump generation, driver outputs, and receiver inputs in one interface circuit. Charge-pump circuitry develops the RS-232 voltage rails from the +5 V supply, while the receivers provide the logic-side signaling required by the host controller. The MAX232A family is specifically intended for systems where ±12 V is unavailable, allowing a conventional regulated 5 V supply to serve both logic and interface requirements.

Typical uses include industrial serial-port equipment, test and measurement instruments, data acquisition systems, embedded serial adapters, and legacy computer peripherals. Two transmitter channels can support one hardware flow-control path while carrying data on the other, and two receiver channels can accept data and a status signal. Connection to a DB-9 or equivalent connector still requires the appropriate protection, filtering, and signal-routing components required by the target port.

When laying out the circuit, treat each driver output as a high-voltage RS-232 node and each receiver input as a sensitive line. Follow the manufacturer datasheet for charge-pump capacitor selection and placement, keep the external components close to their designated pins, and verify the connector-side protection network for the environmental conditions of the equipment. The ceramic LCC footprint and pin assignment must also be checked against the PCB library before assembly.

This page consolidates the exact MAX232AMLP package information, interface family characteristics, sourcing references, design guidance, and same-package comparison points. It also identifies where an engineer should consult the Analog Devices datasheet for the exact pin map, temperature range, capacitance values, and qualification attributes before releasing a production design.

Drop-in-Alternativen für MAX232AMLP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

MAX232AMLP/883B

✅ Drop-In
📦 20-LCC (8.9 mm x 8.9 mm)
Same 20-LCC footprint and 2-driver/2-receiver ratings; the /883B qualification suffix differs while the core channel and voltage ratings show 0 V and 0 A difference.

📋 Referenzalternative (nicht im Katalog)

MAX232CMLP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-LCC (8.9 mm x 8.9 mm)
Same MAX232A 2/2 channel configuration and +5 V architecture; the ordering suffix changes the grade designation while the principal channel counts differ by 0.

📋 Referenzalternative (nicht im Katalog)

MAX233AMLP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-LCC (8.9 mm x 8.9 mm)
Same 2-driver/2-receiver RS-232 family and +5 V supply, with 0 channel-count difference; external charge-pump capacitor requirements require verification.

📋 Referenzalternative (nicht im Katalog)

MAX233CMLP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-LCC (8.9 mm x 8.9 mm)
Same 20-LCC MAX232A-family mechanical format and 2/2 RS-232 arrangement, with 0 driver and 0 receiver count difference; grade-specific limits require verification.

📋 Referenzalternative (nicht im Katalog)

MAX232AMLP

✅ Drop-In
Analog Devices
📦 20-LCC (8.9 mm x 8.9 mm)
RS-232 driver/receiver transceiver · 2 · 2 · +5 V · EIA/TIA-232E · V.28 and V.24 · 20-LCC ceramic package · 8.9 mm x 8.9 mm

Preis auf Anfrage

Datenblatt ansehen →

MAX232AMLP Technische Daten

Product Type RS-232 driver/receiver transceiver
Number of Drivers 2
Number of Receivers 2
Versorgungsspannung +5 V
Interface Standard EIA/TIA-232E
Supported Signaling Standards V.28 and V.24
Gehäuse 20-LCC ceramic package
Package Dimensions 8.9 mm x 8.9 mm
Montageart Through-hole
Voltage Converter Configuration Dual charge-pump DC-DC converters
External Positive Supply Requirement Not required; single +5 V supply

MAX232AMLP 8.9 mm x 8.9 mm Pinbelegungsleitfaden

Pinbelegung für MAX232AMLP (8.9 mm x 8.9 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX232AMLP im 8.9 mm x 8.9 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX232AMLP.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX232AMLP ist geeignet für 6 Anwendungs: Industrial Serial-Port Interface, Data Acquisition Equipment, Test and Measurement Instruments, Embedded Serial Adapters, Legacy Computer Peripherals, Data and Control Communication.

🏭

Industrial Serial-Port Interface

The MAX232AMLP fits legacy industrial controllers that expose an RS-232 port but operate from a regulated +5 V logic rail. Its two drivers and two receivers can carry one serial data path and a second pair of flow-control or status signals, while the integrated charge pumps eliminate a separate ±12 V supply. The 20-LCC ceramic package also suits through-hole industrial boards where leaded assembly, service access, and long product cycles are preferred. Confirm the exact pin assignment and external charge-pump capacitors in the MAX232A datasheet, and include suitable protection at the connector.

📟

Data Acquisition Equipment

The MAX232AMLP is appropriate for laboratory and industrial data-acquisition equipment that must communicate with a host computer through an RS-232 connection. A +5 V system can use the transceiver's two transmit and two receive channels without adding a separate bipolar supply, reducing the interface power-tree complexity. The through-hole 20-LCC package is useful when the acquisition board uses conventional through-hole construction. Designers should verify the MAX232AMLP data rate and receiver thresholds for the selected cable length and place the required charge-pump capacitors close to the device.

🔧

Test and Measurement Instruments

The MAX232AMLP can provide the RS-232 port required by test equipment, service tools, and programmable instruments that use a single +5 V supply. Two receivers allow the controller to monitor a data line and an auxiliary status input, while two drivers can support command output and handshake signaling. The ceramic leaded package is especially attractive for instrument platforms assembled with through-hole workflows. For reliable operation, follow the Analog Devices reference circuit for charge-pump capacitors and verify that the selected connector includes the protection required by the operating environment.

🖥️

Embedded Serial Adapters

The MAX232AMLP is suitable for embedded serial adapters that convert a 5 V UART signal into a full-duplex RS-232 connection. The two transmit channels can carry serial data and a hardware flow-control output, while the two receive channels can accept data and a hardware flow-control input. This avoids a separate level-shifter assembly in equipment designed around a legacy PC serial port. The through-hole ceramic package fits leaded adapter boards, but the PCB must use the exact 20-LCC footprint rather than a generic 20-pin DIP or SOIC footprint.

⌨️

Legacy Computer Peripherals

MAX232AMLP addresses legacy computer peripherals and service equipment that communicate through an EIA/TIA-232E, V.28, or V.24 port. Because the interface operates from +5 V and contains the charge-pump converters internally, the design can retain an RS-232 connection without a separate ±12 V supply. The 20-LCC package supports retrofit boards that already accommodate a leaded ceramic footprint. Before using the part, confirm that the equipment's logic levels, handshake convention, and connector pin arrangement match the transceiver and its receiver and driver definitions.

🌐

Data and Control Communication

The MAX232AMLP can combine asynchronous data communication with hardware handshake signals in compact control equipment. Two drivers and two receivers allow a controller to exchange serial data while independently driving or monitoring request-to-send and ready-to-send lines. Its +5 V charge-pump architecture simplifies power distribution compared with an interface requiring external negative voltage, and its 20-LCC package preserves compatibility with leaded legacy hardware. Design the interface to use the correct RS-232 polarity and verify timing against the datasheet's specified driver and receiver propagation characteristics.

Zusammenfassung der empfohlenen Produkte

MAX232AMLP Analog Devices Verwendet in: Industrial Serial-Port Interface, Data Acquisition Equipment, Test and Measurement Instruments, Embedded Serial Adapters, Legacy Computer Peripherals, Data and Control Communication MAX232AMLP/883B Related qualified 20-LCC ordering option Verwendet in: Industrial Serial-Port Interface MAX233AMLP Same-family 20-LCC transceiver candidate Verwendet in: Data Acquisition Equipment, Embedded Serial Adapters MAX232AESE+ Maxim Integrated Verwendet in: Test and Measurement Instruments MAX233EPP Functional MAX232A-family comparison Verwendet in: Legacy Computer Peripherals MAX232ECD Texas Instruments Verwendet in: Data and Control Communication
What is the MAX232AMLP and what does it do?
The MAX232AMLP is a +5 V-powered RS-232 transceiver with two drivers and two receivers in a 20-LCC ceramic package. According to the Analog Devices MAX232A datasheet, it implements EIA/TIA-232E, V.28, and V.24 interfaces and uses integrated charge pumps to generate RS-232 voltage levels where ±12 V is unavailable. Each transmitter converts a logic-level input into a bipolar RS-232 signal, while each receiver converts an incoming RS-232 signal into a logic-level output.
How many RS-232 channels does the MAX232AMLP provide?
The MAX232AMLP provides two RS-232 transmit channels and two RS-232 receive channels. The Analog Devices product listing identifies it as a 2/2 transceiver, and the manufacturer datasheet describes the MAX232A as a multichannel RS-232 driver/receiver. This arrangement supports one bidirectional data path plus a second pair of channels that can carry hardware flow-control signals such as request-to-send and ready-to-send when the connected equipment implements them.
Does the MAX232AMLP require external positive and negative power rails?
No. The MAX232AMLP operates from a single +5 V supply and uses dual internal charge-pump converters to produce the positive and negative voltages required by an RS-232 interface. The Analog Devices MAX232A datasheet specifically identifies the family for equipment where ±12 V is unavailable. External capacitors associated with the charge-pump and interface network are still required; their values and placement must follow the datasheet rather than being inferred from the supply voltage alone.
What package does the MAX232AMLP use?
The MAX232AMLP uses a 20-pin ceramic LCC package measuring approximately 8.9 mm by 8.9 mm, with leads intended for through-hole PCB assembly. The exact package and pin assignment are shown by the Analog Devices and DigiKey product records. Because an LCC footprint is not interchangeable with SOIC, plastic DIP, or exposed-pad packages, confirm all 20 pin numbers against the manufacturer pin-description table before releasing the PCB library or approving a substitute.
Where can I download the MAX232AMLP datasheet PDF?
The official MAX232A datasheet and product documentation are available from the Analog Devices product page at https://www.analog.com/en/products/max232a.html. The MAX232AMLP is a temperature and package option within the MAX232A family, so the family datasheet is the controlling document for its charge pumps, electrical characteristics, pin descriptions, and application information. Use the package drawing and ordering table to identify the MLP ordering code and any grade-specific details.
Where is the MAX232AMLP pinout located?
The MAX232AMLP pinout is located in the pin-description section of the Analog Devices MAX232A datasheet, with the 20-LCC package drawing identifying physical pin orientation. Before assigning PCB nets, map every numbered lead to its function and preserve the package's counter-clockwise numbering convention. The LCC package used by MAX232AMLP is not mechanically interchangeable with 20-pin SOIC or DIP variants, so the PCB footprint must be checked against the manufacturer drawing rather than selected only by pin count.
Where can I buy the MAX232AMLP online?
Use the Request a Quote form on this page to request MAX232AMLP availability, current commercial terms, and the required quantity. The form is the appropriate route for an exact ceramic-LCC ordering code because stock and lead time can change with package, temperature grade, and inspection requirements. Specify the complete MAX232AMLP MPN, quantity, and whether reel, tube, or another approved delivery format is required for the production plan.
What is the lead time for the MAX232AMLP?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on the exact MAX232AMLP package suffix, procurement quantity, and required inspection or qualification status. For a production commitment, provide the forecast dates for first article and production orders so the supplier can confirm allocation without relying on an outdated generic catalog lead time.
Is the MAX232AMLP currently available and active?
Analog Devices identifies the MAX232A family as production, and the MAX232AMLP has current distributor product records. Use the Request a Quote form on this page to confirm stock for the exact ceramic-LCC suffix and the quantity required by your build. A family-level production statement does not guarantee every package or temperature-grade option is stocked at every distributor, so exact MPN confirmation remains necessary.
What is the best drop-in replacement for the MAX232AMLP?
The closest replacements must retain the 20-LCC footprint, pin assignment, two-driver/two-receiver arrangement, +5 V operation, and RS-232 interface function. A 20-pin SOIC or plastic DIP part may be electrically similar but is not a physical drop-in replacement for the ceramic LCC. Compare the candidate's complete pin-description table, charge-pump capacitor requirements, temperature grade, and qualification status with the MAX232AMLP before approving a substitution.
Can MAX232AMLP be replaced by a surface-mount RS-232 transceiver?
A surface-mount RS-232 transceiver can replace MAX232AMLP functionally only after a PCB redesign because MAX232AMLP uses a through-hole 20-LCC package. A pin-equivalent SOIC device is not a drop-in replacement when its lead arrangement and footprint differ. During conversion, verify supply voltage, channel count, driver and receiver logic levels, charge-pump capacitor values, pin multiplexing, propagation delay, and operating-temperature requirements against the MAX232AMLP datasheet.
MAX232AMLP versus MAX233AMLP: which is the better replacement?
MAX233AMLP is the closer same-package option when its complete 20-LCC pinout and electrical ratings match the installed MAX232AMLP. The MAX232A family is characterized by two drivers, two receivers, +5 V operation, and integrated charge-pump converters, while variants can differ in external capacitor requirements and qualification. Confirm those differences in the Analog Devices family datasheet before substitution; matching the visible package name and channel count alone is not sufficient.
When should I choose the MAX232AMLP instead of a smaller surface-mount RS-232 transceiver?
Choose MAX232AMLP when an existing 20-LCC through-hole design must be retained, when leaded assembly is preferred, or when the production plan requires that exact ceramic-package ordering code. Choose a surface-mount alternative for a new board when component height, assembly cost, placement area, or no-touch or automated optical inspection capability is more important than preserving the MAX232AMLP footprint. The decision must include a deliberate footprint conversion rather than treating a functional equivalent as drop-in.
Is MAX232AMLP suitable for an industrial RS-232 port?
MAX232AMLP is functionally suitable for an industrial RS-232 port when the interface meets EIA/TIA-232E, V.28, or V.24 signaling requirements and uses a +5 V supply. Its 20-LCC ceramic package supports through-hole assembly and is appropriate for legacy or mechanically constrained industrial equipment. The design must also include the specified charge-pump capacitors, connector protection appropriate to the environment, and verified ground and return-path arrangements.
What are the key specifications of MAX232AMLP that engineers should know?
The key MAX232AMLP specifications are +5 V operation, two RS-232 drivers, two RS-232 receivers, dual charge-pump converters, support for EIA/TIA-232E and V.28/V.24, and a 20-LCC ceramic package measuring 8.9 mm by 8.9 mm. According to the Analog Devices MAX232A datasheet and the exact-MPN distributor listing, the device is intended for systems where ±12 V is unavailable. Exact data rate, supply current, temperature range, and capacitor values should be taken from the family datasheet and ordering information.
What is the best Analog Devices equivalent for the MAX232AMLP?
The best Analog Devices equivalent is the closest member of the MAX232A family offered in the same 20-LCC package with the same two-driver and two-receiver pinout. MAX233AMLP is a relevant candidate for evaluation because it remains in the same multichannel +5 V RS-232 family, but its exact lead assignment, external capacitor requirements, and ordering status must be verified before it is called a drop-in replacement. The MAX232A family datasheet is the authoritative comparison source.

Technische Referenzdaten für MAX232AMLP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX232AMLP when maintaining a board designed around the 20-LCC ceramic footprint, when the equipment needs two RS-232 drivers and two receivers, and when a single +5 V supply must generate the required bipolar RS-232 levels. It is particularly suitable for through-hole industrial, instrumentation, and legacy peripheral designs where long product cycles and exact package continuity matter. Consider MAX232AMLP/883B when the procurement specification calls for that qualified suffix and its documentation confirms equivalent electrical limits. MAX233AMLP or MAX233CMLP may be evaluated as same-family alternatives, but external capacitor requirements and exact pin functions must be checked before substitution. Surface-mount choices such as MAX232AESE+ may be better for a new compact PCB, yet they are not drop-in replacements because the package and footprint change. For any proposed replacement, compare the complete pin map, charge-pump network, operating-temperature range, data-rate limit, and qualification requirements against the MAX232AMLP family datasheet.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX232AMLP/883B MAX232CMLP MAX233AMLP MAX233CMLP MAX232AMLP
Package 20-LCC (8.9 mm x 8.9 mm) 20-LCC (8.9 mm x 8.9 mm) 20-LCC (8.9 mm x 8.9 mm) 20-LCC (8.9 mm x 8.9 mm) 20-LCC (8.9 mm x 8.9 mm) 20-LCC (8.9 mm x 8.9 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Charge-Pump Configuration Dual charge-pump converters Dual charge-pump converters Dual charge-pump converters Dual charge-pump converters Dual charge-pump converters Dual charge-pump converters

Wichtigste Unterscheidungsmerkmale

  • Exact ceramic through-hole footprint retention (vs. MAX232AESE+)
  • Two full-duplex interface channels (vs. MAX242EPN+)
  • Single-supply charge-pump implementation (vs. MAX233EPP)

Designhinweise

Use the exact 20-LCC footprint from the MAX232A mechanical drawing rather than substituting a 20-pin DIP or SOIC library symbol. The LCC lead arrangement, body size, and pin-1 orientation determine solderability and clearance. Confirm each numbered lead against the datasheet pin-description table, especially if the board also uses another MAX232A variant whose multiplexing or external capacitor requirements differ.

Follow the manufacturer charge-pump capacitor values and connection diagram exactly; the +5 V supply does not make those capacitors optional. Place the charge-pump and interface capacitors adjacent to their assigned device pins, and provide a low-impedance supply connection to the relevant ground and supply pins. Avoid long current loops around the charge-pump network because they can increase supply disturbance and reduce margin on RS-232 outputs.

Do not treat a 20-pin RS-232 IC with a different package as a drop-in replacement. SOIC, plastic-DIP, and LCC versions can have different pin numbering, lead spacing, capacitance requirements, and thermal behavior. For a redesign, verify the MAX232AMLP logic levels, receiver thresholds, propagation timing, channel direction, and charge-pump topology against the candidate datasheet before updating the schematic and PCB.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The interface standards EIA/TIA-232E, V.28, and V.24 are documented for the MAX232A family. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the MAX232AMLP ordering code requires confirmation from the manufacturer or its compliance documentation.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX232AMLP datasheet MAX232AMLP datasheet pdf MAX232AMLP pinout MAX232AMLP 20-LCC package MAX232AMLP equivalent MAX232AMLP replacement MAX232AMLP price MAX232AMLP stock Analog Devices MAX232AMLP MAX232AMLP vs MAX233AMLP MAX232AMLP RS-232 transceiver MAX232AMLP industrial serial interface

Verwandte Bauteile & Begriffe

Analog Devices MAX232AMLP MAX232AMLP/883B MAX232CMLP MAX233AMLP MAX233CMLP MAX232A RS-232 transceiver RS-232 driver RS-232 receiver line driver/receiver charge-pump converter EIA/TIA-232E V.28 V.24 TTL logic CMOS logic 20-LCC ceramic leaded chip carrier surface mount industrial automation data acquisition equipment test and measurement embedded serial adapter
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen