Analog Devices

MAX232EESE+ - 120kbps RS-232 Transceiver | Analog Devices

Teilenummer: MAX232EESE+ ✗ Abgekündigt
+5 V Vdss 16-pin narrow SOIC Package
MOQ: 1 |

MAX232EESE+ Übersicht

The Analog Devices MAX232EESE+ is a dual RS-232 line-driver and receiver transceiver operating from a single +5 V supply, with integrated charge-pump circuitry and 15 kV ESD protection. It supports data rates up to 120 kbps and is packaged in a 16-pin narrow SOIC for surface-mount industrial equipment, data acquisition systems, and RS-232 communication ports.

An RS-232 transceiver is an interface IC that converts logic-level signals into bipolar RS-232 levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, MAX232EESE+ belongs to the RS-232 transceiver family of communication interface ICs. It is intended for EIA/TIA-232E and CCITT V.28 links where the endpoint equipment supplies low-voltage logic while the cable interface requires approximately positive and negative voltage signaling.

The MAX232EESE+ provides two transmit channels and two receive channels in one package. Its integrated voltage-generation circuitry lets the device operate from one +5 V rail without a separate negative supply. The manufacturer states that the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. The MAX232E suffix also identifies the 15 kV ESD-protected version listed for the product.

The 16-pin narrow SOIC package supports compact, surface-mounted implementations and automated assembly. Because RS-232 is a single-ended, unbalanced interface, the transceiver simplifies the physical layer but does not provide galvanic isolation, common-mode rejection comparable to differential buses, or long-distance protection beyond the specifications of the MAX232E family. Circuit design should account for connector protection, cable transients, ground continuity, and unused driver or receiver inputs.

Typical uses include serial adapters, test and measurement instruments, programmable logic controllers, industrial control panels, and embedded equipment that previously relied on a legacy RS-232 port. A microcontroller can connect to the logic-side inputs and outputs, while the line-side pins connect through the DB9 or other RS-232 connector.

When laying out a design, place the device close to the connector and place its required charge-pump capacitors on the shortest practical signal paths. Keep the RS-232 traces away from clocks, switching regulators, and sensitive analog inputs. External protection may still be needed for severe industrial environments even though the device includes 15 kV ESD protection.

This page combines the manufacturer's MAX232E family information with interface-focused engineering guidance, package details, purchasing questions, and a practical evaluation of replacement options. It helps engineers determine whether the MAX232EESE+ fits an existing 16-pin SOIC RS-232 design before requesting a quote.

Drop-in-Alternativen für MAX232EESE+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX232EESE+ (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Interface Standard, Supply Voltage, Data Rate.

Analog Devices
Package: 16-pin SOIC
Product Type: RS-232 line transceiver
Vergleichen mit MAX232EESE+ →
Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Supply Voltage: 4.5 V to 5.5 V
Data Rate: 200 kbps
Vergleichen mit MAX232EESE+ →
Maxim Integrated
Package: 16-pin SOIC
Product Type: RS-232 line-driver and receiver transceiver
Interface Standard: EIA/TIA-232E and V.28/V.24
Vergleichen mit MAX232EESE+ →
Maxim Integrated
Package: 16-SOIC
Product Type: RS-232 dual transceiver
Interface Standard: EIA/TIA-232E, V.28, V.24
Vergleichen mit MAX232EESE+ →
Analog Devices
Package: 16-pin SOIC, 0.154 in (3.90 mm) width
Product Type: Dual RS-232 driver and receiver
Interface Standard: TIA/EIA-232-F
Vergleichen mit MAX232EESE+ →
Texas Instruments
Package: 16-pin SOIC
Supply Voltage: 5 V
Data Rate: Up to 120 kbit/s
Vergleichen mit MAX232EESE+ →
MaxLinear
Package: 16-SOIC
Product Type: RS-232 line transceiver
Data Rate: 240 kbps
Vergleichen mit MAX232EESE+ →
MaxLinear
Package: 16-SOIC
Product Type: RS-232 line transceiver
Data Rate: 240 kbps

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

MAX232EESE+ Technische Daten

Product Type Dual RS-232 transceiver with integrated charge pump
Number of Transmit Channels 2
Number of Receive Channels 2
Versorgungsspannung +5 V
Maximum Data Rate 120 kbps
Interface Standard EIA/TIA-232E and CCITT V.28
ESD Protection 15 kV
Gehäuse 16-pin narrow SOIC
Montageart Surface mount

MAX232EESE+ 16-pin narrow soic Pinbelegungsleitfaden

Pinbelegung für MAX232EESE+ (16-pin narrow soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX232EESE+ im 16-pin narrow soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX232EESE+.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX232EESE+ ist geeignet für 6 Anwendungs: Industrial Serial Control Port, Test and Measurement Instrument, Data Acquisition Equipment, Programmable Logic Controller Interface, Point-of-Sale and Peripheral Equipment, Legacy Serial Adapter.

🏭

Industrial Serial Control Port

The MAX232EESE+ provides a compact two-channel RS-232 interface for industrial controllers, analyzers, and service equipment that must communicate with legacy RS-232 devices. Two driver channels and two receiver channels cover the common request, response, and status signaling arrangement used by older test instruments and controllers. Its single +5 V supply simplifies system power planning, while the integrated charge pump avoids a separate negative supply rail. Operation up to 120 kbps supports instrument-control protocols that do not require modern high-speed serial links. The 16-pin narrow SOIC reduces PCB area, but engineers should keep the line-side connections near the connector and verify industrial temperature and transient requirements in the manufacturer datasheet.

🧩

Test and Measurement Instrument

The MAX232EESE+ suits laboratory instruments that expose a legacy RS-232 configuration or control port. Its two transmitters can send commands and status information, while two receivers accept responses and handshaking signals. The stated 120 kbps maximum rate is appropriate for many legacy instrument-control protocols, and the +5 V architecture simplifies integration with digital logic and embedded controllers. The 15 kV ESD-protected E-series variant adds a useful layer of connector protection, although chassis grounding and external surge protection may remain necessary. Use a controlled ground reference between the equipment and connected device, and follow the manufacturer pin and capacitor guidelines in the layout.

📡

Data Acquisition Equipment

The MAX232EESE+ can connect a data-acquisition controller or embedded logger to equipment using an RS-232 command interface. Two receive channels allow the controller to collect commands, acknowledgments, and measurements, while two transmit channels support configuration requests and control messages. A single +5 V supply and an on-chip charge pump reduce the number of external rails required near the connector. The 120 kbps capability is suitable for many low-bandwidth acquisition protocols and legacy peripheral links. Because RS-232 is unbalanced, maintain a common ground through the cable and place protection close to the connector when the port is exposed to user-accessible cables or electrically noisy industrial environments.

🔧

Programmable Logic Controller Interface

The MAX232EESE+ is useful in PLC communication modules and programmable controllers that need to interoperate with RS-232 printers, scanners, meters, or older programming equipment. The device converts between microcontroller logic levels and the positive and negative voltage signaling required by RS-232, including operation at rates up to 120 kbps. Its integrated charge pump allows implementation from one +5 V rail, reducing supply complexity in space-constrained control products. The surface-mount SOIC footprint supports automated assembly, but unused line-side channels should be handled exactly as directed by the manufacturer datasheet. For long cables or harsh installations, add appropriately coordinated connector protection and verify that the ground reference remains usable.

🖥️

Point-of-Sale and Peripheral Equipment

The MAX232EESE+ can bridge a low-voltage controller to a legacy RS-232 peripheral such as a scanner, printer, display, or payment terminal. Two transmit and two receive channels provide useful flexibility for handshake, status, and command wiring while preserving the conventional RS-232 connector interface. The +5 V-powered charge-pump architecture simplifies integration into compact peripheral electronics, and the 16-pin SOIC leaves room for dense board layouts. The stated 120 kbps rate accommodates common peripheral-control traffic. Production designs should use the official pinout, include the required charge-pump capacitors, and apply ESD or surge protection at the exposed connector if the enclosure does not provide sufficient mechanical protection.

🔌

Legacy Serial Adapter

The MAX232EESE+ is appropriate for a compact USB-to-RS-232 or embedded serial adapter requiring two communication channels. It provides the electrical conversion between a modern controller's logic-level UART and a PC-style RS-232 connector while eliminating the need for a separate negative supply. Its 15 kV ESD protection is valuable in adapter applications because the external connector can receive direct user contact. The MAX232E family supports data rates up to 120 kbps, which covers many configuration and control protocols. Designers should still provide connector-side protection appropriate to the enclosure, use a low-ESR charge-pump capacitor layout, and maintain short RS-232 traces to minimize radiated noise and susceptibility to adjacent digital signals.

What are the key specifications of MAX232EESE+ that engineers should know?
The MAX232EESE+ is a dual RS-232 transceiver with two transmit channels, two receive channels, a single +5 V supply, operation up to 120 kbps, and 15 kV ESD protection in a 16-pin narrow SOIC. According to the Analog Devices MAX232E product page, the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications. These features make the device appropriate for legacy RS-232 ports that require bipolar signaling from a single positive supply.
Where can I download the MAX232EESE+ datasheet PDF?
The official MAX232EESE+ technical documentation is available through the Analog Devices MAX232E product page at https://www.analog.com/en/products/max232e.html. The page provides family information covering the MAX202E through MAX213E and MAX232E/MAX241E devices. Open the datasheet link associated with the MAX232E family and verify that the document includes the 16-pin narrow SOIC ordering code MAX232EESE before releasing a design.
Where can I find the MAX232EESE+ pinout?
The MAX232EESE+ pinout is found in the pin-description section of the official MAX232E family datasheet and in the package drawing for the 16-pin narrow SOIC. Use that drawing to assign the charge-pump capacitor pins, supply pins, logic-side inputs and outputs, and RS-232 line-side pins. The verified listing identifies a 16-pin SOIC, but it does not publish the individual pin names, so consult the manufacturer datasheet rather than inferring connections from a generic MAX232 drawing.
What is the MAX232EESE+ used for?
The MAX232EESE+ is used to add a two-channel RS-232 port to logic-level digital equipment. Its two drivers convert transmit logic into RS-232 signals, while its two receivers convert incoming line signals into logic levels. The manufacturer identifies support for EIA/TIA-232E and CCITT V.28 links at rates up to 120 kbps. Typical uses include test instruments, data-acquisition equipment, industrial controllers, and serial adapters.
Can MAX232EESE+ operate from a single 5V supply?
Yes, the MAX232EESE+ operates from a single +5 V supply and uses integrated charge-pump circuitry to generate the voltage levels required by an RS-232 interface. This avoids a separate external negative supply. The listed electrical value is the nominal +5 V supply; consult the manufacturer datasheet for the complete operating range, supply-current limits, charge-pump capacitor requirements, and power-supply sequencing limits.
How fast can the MAX232EESE+ transmit RS-232 data?
The MAX232EESE+ supports data rates up to 120 kbps when loaded, according to the Analog Devices MAX232E product page. This is sufficient for many instrument-control, configuration, and legacy serial protocols. Actual system throughput also depends on the UART, protocol framing, cable characteristics, connector implementation, and timing margin at the selected baud rate.
Does MAX232EESE+ include ESD protection?
Yes, the MAX232EESE+ is identified as a 15 kV ESD-protected RS-232 transceiver. Internal protection helps the device tolerate electrostatic discharge events on the RS-232 interface. It does not by itself guarantee complete system immunity because the connector, enclosure, grounding, cable, and external surge-protection strategy also affect the final installation.
What is the difference between MAX232EESE+ and MAX232ESE+?
The primary documented distinction is the E-series ESD-protection level: the MAX232EESE+ is listed as a 15 kV ESD-protected +5 V RS-232 transceiver, while MAX232ESE+ is described more generally as a +5 V-powered multichannel RS-232 driver. Both use a 16-pin narrow SOIC format according to the product listings. Confirm the exact pin functions and transient specifications against the relevant manufacturer datasheet before substituting one for the other.
When should I choose MAX232EESE+ instead of MAX232EIDR?
Choose MAX232EESE+ when the PCB requires the 16-pin narrow surface-mount SOIC footprint and an integrated 15 kV ESD-protected RS-232 interface. MAX232EIDR is a 16-pin through-hole DIP variant and therefore requires a different footprint and assembly process. The surface-mount package reduces board area, but it does not make the MAX232EESE+ electrically or physically interchangeable with the DIP device without a footprint adapter.
What can replace MAX232EESE+?
The only closely identified replacement candidate is MAX232ESE+T, which uses the same 16-pin narrow SOIC device family and is listed as a 2/2 full-RS-232 transceiver. However, it differs by temperature grade and ordering suffix, so production use requires comparison of the E-series ESD rating, operating-temperature range, and absolute maximum ratings. The cross-reference search did not expose enough part-specific information to approve additional substitutes.
Is MAX232EESE+ a drop-in replacement for MAX231EWE+T?
The cross-reference information identifies MAX231EWE+T as a comparison candidate, but it does not establish that it has the same package, pinout, ESD rating, and electrical limits as MAX232EESE+. A drop-in decision therefore requires the official MAX231E data sheet and a pin-by-pin comparison of the MAX232EESE+. Do not substitute the parts solely because both are described as RS-232 interface devices.
What is the best cross-brand equivalent for MAX232EESE+?
No cross-brand equivalent can be approved from the available cross-reference information alone. A valid second source must use the 16-pin narrow SOIC footprint, preserve the MAX232EESE+ pin assignments, meet the required supply voltage and data rate, and provide acceptable ESD protection. The search results point to cross-reference tools but do not identify a specific cross-brand part with enough package and electrical detail for production release.
Where can I buy MAX232EESE+ and check its price?
Use the Request a Quote form on this page to request the current unit price, stock status, and lead time for MAX232EESE+. The product is listed by major distributors and at the manufacturer, but the verified page does not show a qualifying quantity-break price table for the exact + ordering code. The request form is the appropriate channel for a current transactional quotation.
What is the lead time and stock status of MAX232EESE+?
Current stock and lead time should be requested through the Request a Quote form on this page. The verified distributor listings show marketplace availability pages, but they do not explicitly state a stock quantity or a committed lead time for the exact MAX232EESE+ ordering code. Procurement should confirm quantity, date code, package condition, and lifecycle status when placing the order.
Is MAX232EESE+ suitable for industrial RS-232 equipment?
The MAX232EESE+ is suitable for many industrial serial interfaces because it combines a 16-pin surface-mount package, single +5 V operation, 120 kbps operation, and 15 kV ESD protection. Industrial suitability still depends on the specified temperature range, system-level surge requirements, isolation, and grounding. Confirm those ratings in the manufacturer datasheet and the final equipment standard before qualification.

Technische Referenzdaten für MAX232EESE+ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX232EESE+ for a compact surface-mount design that requires a two-channel RS-232 interface from a single +5 V supply, operation up to 120 kbps, and the E-series 15 kV ESD-protection feature. It is particularly suitable for legacy instrument, controller, adapter, and data-acquisition ports that use a 16-pin narrow SOIC footprint. MAX232ESE+T is the closest identified same-family candidate, but its ordering and temperature-grade differences require verification before approval. MAX232EIDR serves the same broad RS-232 function in a through-hole DIP package, making it appropriate for prototypes or boards designed around through-hole parts but not a physical drop-in replacement. No specific cross-brand equivalent is approved because the available cross-reference results did not establish package dimensions, pin compatibility, electrical limits, and ESD performance for a named part.

Designhinweise

Place the MAX232EESE+ near the RS-232 connector and connect the line-side pins with short, direct traces. Position the charge-pump capacitors close to their specified IC pins with short ground returns, and route the connector ground to the interface ground reference without long loops. Keep clock, Ethernet, switching-power, and high-current traces away from receiver inputs because RS-232 is an unbalanced interface susceptible to coupled noise.

Do not infer a valid substitute from the MAX232 family name alone. A production replacement must match the 16-pin narrow SOIC dimensions and pin assignments, the MAX232E ESD requirement, supply limits, operating-temperature range, and intended data rate. The MAX232ESE+T listing uses the same family and package class, but its temperature-grade and ordering-suffix differences require datasheet review before it can be approved as a drop-in replacement.

The MAX232EESE+ provides 15 kV ESD protection, but the complete interface may still need connector-side surge and ESD protection for exposed industrial cables. Select the external protection to suit the required waveform and coordinate it with the device's operating ratings. A low-impedance chassis or signal-ground path is also important: poor ground continuity can increase susceptibility and make protection behavior less predictable.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The verified MAX232EESE+ listing identifies a 15 kV ESD-protected +5 V RS-232 transceiver in a 16-pin narrow SOIC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not available for this exact ordering code.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX232EESE+ datasheet MAX232EESE+ pinout MAX232EESE+ datasheet pdf MAX232EESE+ equivalent MAX232EESE+ replacement MAX232EESE+ cross reference MAX232EESE+ vs MAX232ESE+T MAX232EESE+ vs MAX232EIDR MAX232EESE+ price MAX232EESE+ stock Analog Devices MAX232EESE+ MAX232EESE+ 120kbps RS-232 MAX232EESE+ 16 pin SOIC MAX232EESE+ industrial serial port MAX232EESE+ application circuit

Verwandte Bauteile & Begriffe

Analog Devices MAX232EESE+ MAX232ESE+T MAX232EIDR MAX231EWE+T RS-232 transceiver RS-232 EIA/TIA-232E CCITT V.28 line driver line receiver interface IC charge-pump voltage generator single +5 V supply 120 kbps data rate 15 kV ESD protection 16-pin narrow SOIC surface-mount package charge-pump capacitor DB9 connector legacy serial adapter industrial controller test and measurement instrument
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen