Analog Devices

MAX3232ECUE+ - 1Mbps RS-232 Transceiver | Analog Devices

Teilenummer: MAX3232ECUE+ ✓ Aktiv
3.0 V to 5.5 V Vdss Down to 10 nA Id 16-pin TSSOP Package
MOQ: 1 |

MAX3232ECUE+ Übersicht

Analog Devices MAX3232ECUE+ is a 2/2 true RS-232 transceiver with two drivers and two receivers, 3.0 V to 5.5 V operation, data rates up to 1 Mbps, and ±15 kV ESD protection in a 16-pin TSSOP package. It converts TTL/CMOS logic levels to true RS-232 levels and back, allowing modern digital controllers to communicate with legacy serial equipment.

A true RS-232 transceiver is an interface IC within the broader communication-IC and interface-IC hierarchy. Its transmitters generate the bipolar voltage swings required by RS-232, while its receivers detect valid logic states after the cable has introduced attenuation, noise, and level inversion. The MAX3232 integrates this interface with an on-chip charge pump, eliminating the external ±12 V supply normally associated with older RS-232 implementations.

The MAX3232ECUE+ supports a 3.0 V to 5.5 V supply, operation at data rates up to 1 Mbps, and shutdown current down to 10 nA. Its ±15 kV ESD protection applies to the RS-232 pins and helps improve interface ruggedness in exposed industrial, communications, instrumentation, and consumer equipment. The device provides a compact 16-pin TSSOP option for space-constrained circuit boards.

Internally, the IC combines two line drivers, two line receivers, and a dual charge-pump voltage converter. The charge pump generates the positive and negative transmitter voltages from a single low-voltage supply, while the receivers translate the returned bipolar signal into a CMOS-compatible output. Because the MAX3232 is labeled a production device by Analog Devices, it is positioned as an active RS-232 interface option rather than a legacy-only component.

Typical uses include serial-port adapters, industrial control links, point-of-sale equipment, barcode scanners, instrumentation, embedded systems, and data cables where a host UART requires RS-232 electrical levels. The up-to-1-Mbps capability supports faster serial links than the commonly cited 250-kbps class, provided the connected cable, connector, grounding, and receiving equipment meet the required signal conditions.

When laying out the circuit, place the charge-pump capacitors and the driver and receiver interface components according to the manufacturer datasheet layout guidance. Keep the high-voltage RS-232 driver traces away from sensitive low-level logic, preserve the specified ground connection, and provide unobstructed ESD paths at connector entry points. The exact pin names and capacitor values should be assigned from the manufacturer pin-description and application tables.

This page combines the verified electrical and package characteristics, production status, commercial information, drop-in alternatives, and practical design considerations needed to evaluate the MAX3232ECUE+. It is intended to help engineers distinguish its low-voltage operation, 1-Mbps capability, enhanced ESD protection, and TSSOP footprint from other RS-232 interface implementations.

Drop-in-Alternativen für MAX3232ECUE+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3232ECUE+ (gleiche Bauform und Footprint) – abweichend in Device Type, Maximum Data Rate, Mounting Type, Package, Operating Temperature Range.

Analog Devices
Maximum Data Rate: 1 Mbps
Mounting Type: Surface mount
Package: 16-pin TSSOP
Vergleichen mit MAX3232ECUE+ →
Maxim Integrated
Device Type: Dual Transceiver
Operating Temperature Range: 0 C to +70 C
Vergleichen mit MAX3232ECUE+ →
Analog Devices
Device Type: 2/2 RS-232 transceiver
Vergleichen mit MAX3232ECUE+ →
MaxLinear
Device Type: RS-232 transceiver
Maximum Data Rate: 120kbps
Mounting Type: SMD

MAX3232EUE+T

✅ Drop-In
Analog Devices
📦 TSSOP-16
2/2 RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · 300 µA · 0.1 µF each · 4

Preis auf Anfrage

Datenblatt ansehen →

MAX3232CUE+T

✅ Drop-In
Analog Devices
📦 TSSOP-16
2/2 transceiver, full RS-232 · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · 4 × 0.1 µF · 16-pin TSSOP · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

SP3232ECY-L/TR

✅ Drop-In
MaxLinear
📦 TSSOP-16
RS-232 transceiver · 2 · 2 · Full duplex · 3V to 5.5V · 120kbps · 1mA · 0°C to 70°C

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECUE+ Technische Daten

Product Type 2/2 full-duplex RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Shutdown Supply Current Down to 10 nA
ESD Protection ±15 kV
Interface Standard True RS-232
Gehäuse 16-pin TSSOP
Montageart Surface mount
Charge-Pump Supply Dual on-chip charge pump
Lebenszyklusstatus Production
Datasheet Revision Rev. 10

MAX3232ECUE+ 16-pin tssop Pinbelegungsleitfaden

Pinbelegung für MAX3232ECUE+ (16-pin tssop-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3232ECUE+ im 16-pin tssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3232ECUE+.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3232ECUE+ ist geeignet für 6 Anwendungs: Industrial Serial Control, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Barcode Scanner and Data Cable, Embedded Equipment Configuration Port, Networking and Remote Management.

🏭

Industrial Serial Control

The MAX3232ECUE+ is well suited to connecting a 3.3 V or 5 V controller UART to legacy RS-232 equipment in industrial control systems. Its 3.0 V to 5.5 V operating range removes the need for a separate high-voltage supply, while operation up to 1 Mbps leaves ample margin for short control and diagnostic links. The integrated dual charge pump generates the bipolar signal levels required by true RS-232. Place the device near the connector and route protected driver outputs as a compact differential-like point-to-point interface, keeping sensitive logic away from those nets. The ±15 kV ESD rating is particularly useful at an external equipment boundary, although system-level surge and grounding requirements still need separate evaluation.

🖥️

Point-of-Sale Terminal Interface

The MAX3232ECUE+ can bridge a low-voltage host processor to a point-of-sale terminal, printer, or customer-display controller that uses RS-232. The 16-pin TSSOP package preserves board area, and its 2/2 arrangement supports two communications channels when full duplex is required. With a 3.0 V to 5.5 V supply and an on-chip charge pump, the system needs only a low-voltage logic rail plus the recommended external capacitors. The up-to-1-Mbps capability supports demanding serial transactions, while the ±15 kV ESD protection strengthens the connector-facing interface. Maintain a continuous signal-ground path, place protection and bypass capacitance at the connector side, and verify the attached peripheral’s voltage levels before enabling the drivers.

🔧

Instrumentation and Test Equipment

The MAX3232ECUE+ provides a practical way for instrumentation to expose a legacy RS-232 configuration port while running its internal electronics from a 3.3 V or 5 V rail. Two drivers and two receivers allow full-duplex communication when the connected instrument uses separate transmit and receive conductors. The MAX3232’s 1-Mbps maximum supports faster console and data-transfer sessions than conventional 250-kbps-class transceivers, subject to cable limitations. Its small TSSOP footprint can be placed close to the DB9 or equivalent connector to minimize exposed trace length. Follow the manufacturer’s charge-pump capacitor layout, provide local supply bypassing, and use a chassis-ground strategy appropriate to the instrument’s EMC and safety requirements.

🧩

Barcode Scanner and Data Cable

The MAX3232ECUE+ fits compact scanner, reader, and service-cable designs that need to present an RS-232 port to a host. Its low-voltage operation permits shared use with embedded processors, and shutdown current down to 10 nA supports portable or intermittently connected equipment. The 16-pin TSSOP package reduces connector-adapter size, while ±15 kV ESD protection improves tolerance of handling and connection events at the exposed interface. Use it only where the target device truly requires RS-232 bipolar levels rather than USB, TTL, or RS-485. Confirm logic polarity, flow control, and connector pin assignment during design review, and keep the analog interface section physically separated from sensitive display, sensing, or wireless circuits.

🖥️

Embedded Equipment Configuration Port

The MAX3232ECUE+ can provide a service and configuration channel for embedded equipment that retains a legacy RS-232 connector but operates from modern low-voltage electronics. Its 3.0 V to 5.5 V supply range supports common 3.3 V systems, and the integrated charge pump avoids external bipolar generation hardware. The 2/2 transceiver arrangement supports two RS-232 channels for diagnostics or an independent command path. With operation up to 1 Mbps, the interface can support high-speed boot, logging, or data-transfer operations when both endpoints and the cable are suitable. Place bypass and charge-pump capacitors exactly as directed in the datasheet, preserve ground continuity, and add connector-side protection only after checking that it does not degrade the transceiver’s intended signal behavior.

🌐

Networking and Remote Management

The MAX3232ECUE+ can support management or diagnostic connections in routers, switches, and other networked equipment that expose RS-232 for installation and maintenance. A 3.0 V to 5.5 V supply fits contemporary control electronics, while the dual charge pump keeps the external power design simple. The 1-Mbps capability is useful for remote console sessions and bulk diagnostics over suitable short cables. The device’s 16-pin TSSOP package supports space-constrained line cards and adapter boards, and ±15 kV ESD protection adds robustness where an operator may connect an unprotected cable. Maintain separation between switching power stages and RS-232 routing, use controlled ground references, and test the completed system against its applicable electromagnetic-interference requirements.

What is the operating voltage of MAX3232ECUE+?
The MAX3232ECUE+ operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232 product page and Data Sheet Rev. 10, this single low-voltage supply supports both the CMOS-side logic and the internal charge pump that generates the bipolar voltages required by a true RS-232 interface. The operating range makes the device suitable for 3.3 V and 5 V systems without a separate high-voltage supply.
How fast can MAX3232ECUE+ transmit RS-232 data?
The MAX3232ECUE+ supports data rates up to 1 Mbps. The Analog Devices product page identifies it as a true RS-232 transceiver with operation up to 1 Mbps, distinguishing it from 250-kbps-class RS-232 devices. Actual system throughput also depends on UART settings, cable length, connector behavior, grounding, and the bandwidth and thresholds of the receiving equipment.
Where can I download the MAX3232ECUE+ datasheet PDF?
The official MAX3232 datasheet is available through the Analog Devices MAX3232 product page, which links the MAX3232 Data Sheet Rev. 10 and supporting documentation. Use the manufacturer document to confirm the complete pin description, recommended charge-pump capacitors, electrical characteristics, and layout example. The MAX3232ECUE+ is the 16-pin TSSOP ordering variant specified for this page.
Where can I find the MAX3232ECUE+ pinout?
The MAX3232ECUE+ pinout is published in the Analog Devices MAX3232 Data Sheet Rev. 10 under the pin-description and device-information tables. The device uses a 16-pin TSSOP package with two driver outputs, two receiver outputs, charge-pump terminals, logic supply and ground connections, and enable-related functions. Use that table when assigning every PCB net and when checking the exposed connector-side protections.
What are the key specifications engineers should know about MAX3232ECUE+?
The MAX3232ECUE+ is a production 2/2 true RS-232 transceiver with a 3.0 V to 5.5 V supply, operation up to 1 Mbps, shutdown current down to 10 nA, and ±15 kV ESD protection. Analog Devices specifies it in a 16-pin TSSOP package. Its dual on-chip charge pump eliminates the external bipolar supply used by traditional RS-232 implementations.
Is MAX3232ECUE+ the same as MAX3232EUE+T?
The MAX3232ECUE+ and MAX3232EUE+T are closely related 16-pin TSSOP RS-232 transceivers, but the exact ordering suffix must be checked against the manufacturer’s device table before substitution. The MAX3232ECUE+ is identified in distributor listings as a 2/2 full-RS-232 device rated up to 1 Mbps with ±15 kV ESD protection. Confirm temperature grade, lead configuration, and production status for the exact suffix.
What is the best drop-in replacement for MAX3232ECUE+?
The SP3232ECY-L/TR from MaxLinear is identified by the manufacturer cross-reference data as a pin-compatible drop-in replacement for MAX3232ECUE+. It uses the same TSSOP footprint and provides a second sourcing option with possible minor parametric differences. Confirm supply voltage, data rate, ESD rating, temperature grade, capacitor requirements, and shutdown behavior against the original design before production release.
Can SP3232ECY-L/TR replace MAX3232ECUE+ without PCB changes?
Yes, the MaxLinear cross-reference lists SP3232ECY-L/TR as a drop-in, pin-compatible replacement for MAX3232ECUE+. The TSSOP land pattern is retained, but “drop-in” does not mean every electrical characteristic is identical. Review the replacement data sheet for data-rate limits, ESD protection, supply current, charge-pump capacitance, propagation delay, and temperature coverage before approving the substitution.
When should I choose MAX3232ECUE+ instead of SP3232ECY-L/TR?
Choose MAX3232ECUE+ when the design is already qualified around its 3.0 V to 5.5 V operation, up-to-1-Mbps performance, ±15 kV ESD rating, and Analog Devices documentation. Choose SP3232ECY-L/TR when its second-source parameters are acceptable and supply-chain resilience has greater priority. For either choice, verify the charge-pump capacitors and all timing and protection requirements.
Is MAX3232ECUE+ suitable for industrial and instrumentation equipment?
The MAX3232ECUE+ is suitable for many industrial and instrumentation interfaces because it combines true RS-232 operation from a 3.0 V to 5.5 V supply with ±15 kV ESD protection and a compact 16-pin TSSOP package. Its suitability for a specific product still depends on surge requirements, temperature range, isolation strategy, grounding, cable length, and the EMC standard applicable to the finished equipment.
Where can I buy MAX3232ECUE+ online?
Use the Request a Quote form on this page to request MAX3232ECUE+ availability, lead time, and a quotation. The exact device is listed as a 16-TSSOP, 2/2 full-RS-232 transceiver by Analog Devices, and the manufacturer lists the MAX3232 family as production. Supply configuration and lifecycle confirmation should be handled through the quotation process before a purchase order is released.
What is the price of MAX3232ECUE+?
The current commercial price for MAX3232ECUE+ should be obtained through the Request a Quote form on this page. The listing is an exact 16-pin TSSOP orderable part, while pricing can vary with quantity, package configuration, and market conditions. The structured pricing information on the page is intended to update independently rather than publish a stale quotation in technical content.
What is the lead time for MAX3232ECUE+?
Request the current MAX3232ECUE+ lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer identifies the MAX3232 family as production, but production status alone does not establish available inventory, allocation, or a guaranteed delivery date. Include the required quantity, date code policy, and shipment destination when requesting the quotation.
Is MAX3232ECUE+ in stock?
Current MAX3232ECUE+ stock should be confirmed through the Request a Quote form on this page. The Analog Devices product page identifies MAX3232 as production, while distributor search results indicate active sourcing channels for the exact MAX3232ECUE+ order code. Use the quotation form for the quantity-specific availability answer and any assembly or date-code requirements.
Does MAX3232ECUE+ need external RS-232 voltage?
No, the MAX3232ECUE+ does not require an external ±12 V supply for normal true RS-232 operation. Its internal dual charge pump derives the required positive and negative transmitter voltages from the 3.0 V to 5.5 V logic supply. External charge-pump capacitors are still required; use the capacitor values and placement specified in the Analog Devices datasheet for reliable operation.

Technische Referenzdaten für MAX3232ECUE+ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX3232ECUE+ when the PCB requires a 16-pin TSSOP true RS-232 interface, the logic rail is between 3.0 V and 5.5 V, and the link may operate above 250 kbps. Its ±15 kV ESD rating and production status make it a practical primary choice for exposed service ports, industrial adapters, and instrumentation. MAX3232EUE+T is the closest same-manufacturer option when its exact suffix ratings and qualification match the design. MAX3232CUE+T is appropriate only when 250 kbps is sufficient and the corresponding electrical details have been checked. SP3232ECY-L/TR offers a documented pin-compatible second source, but minor parametric differences must be reviewed, especially data rate, ESD protection, temperature range, capacitor requirements, and shutdown current.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3232EUE+T MAX3232CUE+T SP3232ECY-L/TR
Brand Analog Devices Analog Devices Analog Devices MaxLinear
Package TSSOP-16 TSSOP-16 - same TSSOP-16 - same TSSOP-16 - same
On-Chip Charge Pump Yes Yes Yes Yes

Wichtigste Unterscheidungsmerkmale

  • Higher maximum data rate than the older MAX3232CUE+T (vs. MAX3232CUE+T)
  • Enhanced ESD protection on the RS-232 interface (vs. MAX3232CUE+T)
  • Documented manufacturer cross-reference for second sourcing (vs. SP3232ECY-L/TR)

Designhinweise

Place the charge-pump capacitors close to their designated MAX3232ECUE+ pins and use the capacitance and tolerance specified by the manufacturer. Keep the loop formed by the IC, charge-pump capacitor, and its return connection compact because switching current circulates through this path. Provide local supply decoupling at the logic pins and route connector-side RS-232 nets away from clocks, sensors, ADC inputs, and sensitive analog signals.

Treat each RS-232 driver output as a high-energy, bipolar interface net rather than a conventional low-voltage logic trace. Route driver and receiver lines together as a controlled point-to-point pair where practical, maintain a continuous ground reference, and avoid routing them beneath sensitive analog circuitry. If the interface crosses board regions, use the datasheet’s high-impedance state during board configuration to prevent unintended signals on disconnected ports.

Do not substitute a 250-kbps-class RS-232 device into a design that relies on the MAX3232ECUE+ 1-Mbps capability without checking the complete timing chain. Also verify whether the installed voltage is the 3.3 V or 5 V system rail, because the transceiver’s CMOS-side logic levels must match the controlling UART. Check the exact ordering suffix and package footprint before releasing a PCB or replacement order.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The Analog Devices product page identifies the MAX3232 family as production, but the retrieved material does not explicitly state the compliance status for this exact ordering suffix.

Ähnliche Suchanfragen

MAX3232ECUE+ datasheet MAX3232ECUE+ pinout MAX3232ECUE+ datasheet pdf MAX3232ECUE+ replacement MAX3232ECUE+ equivalent MAX3232ECUE+ cross reference MAX3232ECUE+ price MAX3232ECUE+ stock MAX3232ECUE+ TSSOP-16 MAX3232ECUE+ 1Mbps RS-232 MAX3232ECUE+ vs SP3232ECY-L/TR Analog Devices MAX3232ECUE+

Verwandte Bauteile & Begriffe

Analog Devices MAX3232ECUE+ MAX3232EUE+T MAX3232CUE+T SP3232ECY-L/TR RS-232 transceiver true RS-232 interface line driver line receiver dual charge pump interface IC communication IC semiconductor TSSOP-16 TSSOP family surface-mount package EIA/TIA-232 ESD protection 3.3 V logic 5 V logic industrial control point-of-sale equipment instrumentation serial-port adapter RS-232
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen