Texas Instruments

MAX3386ECPW - 3 to 5.5V RS-232 Transceiver | Texas Instruments

Teilenummer: MAX3386ECPW ✓ Aktiv
3 V to 5.5 V Vdss 20-pin TSSOP Package
MOQ: 1 |

MAX3386ECPW Übersicht

The Texas Instruments MAX3386ECPW is a 3- to 5.5-V, 250-kbps RS-232 line driver/receiver with three drivers, two receivers, a logic supply pin, and plus-or-minus 15-kV IEC-ESD protection. The device is packaged in a 20-pin TSSOP package. It is designed for bidirectional serial-interface systems that require RS-232 line drivers and receivers in one compact surface-mount package.

An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions for communicating between equipment over the RS-232 standard. The MAX3386ECPW converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. Its 3- to 5.5-V operating range supports both 3.3-V and 5-V system rails, while the 250-kbps data rate is suitable for moderate-speed serial links.

Key features include three RS-232 drivers, two RS-232 receivers, a separate logic supply pin, and plus-or-minus 15-kV IEC-ESD protection on the RS-232 inputs and outputs. The family is positioned for industrial-control, instrumentation, data-acquisition, and embedded equipment interfaces where a compact transceiver and electrostatic-discharge resilience are useful. The MAX3386ECPW is a member of the MAX3386E family, also identified by the manufacturer as the MAX3386E product page.

The MAX3386E architecture uses charge-pump circuitry internally to generate the RS-232 transmit voltage levels. The logic-side supply and the driver-side supply arrangement allow the interface to operate with modern low-voltage digital logic while maintaining RS-232-compatible signal levels at the connector. The integrated protection helps reduce damage from electrostatic discharge events encountered during handling or field installation, although the complete system still requires appropriate board-level grounding and signal routing.

Typical applications include industrial serial controllers, test and measurement equipment, barcode and data-acquisition systems, point-of-sale equipment, and embedded RS-232 links. The device is especially appropriate when the design needs three transmit channels and two receive channels rather than a one-driver, one-receiver RS-232 transceiver.

When laying out a board using the MAX3386ECPW, place the device near the RS-232 connector and route driver and receiver traces away from sensitive analog or high-speed digital signals. Maintain the connector-side ground path and follow the manufacturer’s recommended charge-pump capacitor connections. Confirm the logic supply voltage, RS-232 connector pin assignment, and the required charge-pump capacitors during schematic and layout review.

This page combines the manufacturer’s MAX3386E product information, distributor identification, package details, application guidance, and structured replacement information. It is intended to help engineers evaluate the MAX3386ECPW for RS-232 interface designs while checking exact pin, electrical, and compliance details against the manufacturer datasheet.

Drop-in-Alternativen für MAX3386ECPW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3386ECPW (gleiche Bauform und Footprint) – abweichend in ESD Protection, Product Type.

Analog Devices
ESD Protection: ±25 kV
Product Type: RS-232 transceiver
Vergleichen mit MAX3386ECPW →

MAX3386EIPWR

✅ Drop-In
📦 20-pin TSSOP
Same MAX3386E family and 20-pin TSSOP package; suffix-specific temperature and ordering details differ, with the available comparison identifying the same 3-driver/2-receiver RS-232 function.

📋 Referenzalternative (nicht im Katalog)

MAX3386EEUP+

✅ Drop-In
Analog Devices
📦 20-pin TSSOP
RS-232 transceiver · 3 V · 3 · 2 · ±25 kV · EIA/TIA-232 · V.28/V.24 · 20-pin TSSOP

Preis auf Anfrage

Datenblatt ansehen →

SP3203ECY-L/TR

✅ Drop-In
📦 20-pin TSSOP
Cross-brand 20-pin TSSOP RS-232 transceiver candidate; the listing identifies a 3/2 full-RS-232 configuration, while exact pin mapping and electrical details require final manufacturer verification.

📋 Referenzalternative (nicht im Katalog)

MAX3386ECPW Technische Daten

Product Type RS-232 line driver/receiver
Transceiver Configuration 3 drivers / 2 receivers
Supply Voltage Range 3 V to 5.5 V
Datenrate 250 kbps
ESD Protection +/-15 kV IEC-ESD
Logic Supply Pin Yes
RS-232 Interface EIA/TIA-232
Gehäuse 20-pin TSSOP
Package Type TSSOP-20
Montageart Surface Mount
Number of Drivers 3
Number of Receivers 2
Operating Voltage 3 V to 5.5 V
Maximum Data Rate 250 kbps
Input ESD Rating +/-15 kV IEC-ESD
Output ESD Rating +/-15 kV IEC-ESD
Supplier Supply Texas Instruments
Manufacturer Product Page MAX3386E

MAX3386ECPW tssop-20 Pinbelegungsleitfaden

Pinbelegung für MAX3386ECPW (tssop-20-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3386ECPW im tssop-20-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3386ECPW.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3386ECPW ist geeignet für 6 Anwendungs: Industrial Control Serial Links, Test and Measurement Equipment, Data Acquisition Systems, Embedded Serial Consoles, Point-of-Sale and Peripheral Equipment, Instrumentation and Laboratory Interfaces.

🏭

Industrial Control Serial Links

The MAX3386ECPW fits industrial control equipment that needs a compact RS-232 interface alongside a 3.3-V or 5-V controller. Its three drivers support multiple outbound control channels, while two receivers can monitor two incoming status signals. The 250-kbps maximum data rate is appropriate for configuration, diagnostic, and supervisory communications rather than high-bandwidth streaming. Texas Instruments identifies the MAX3386E as a 3- to 5.5-V RS-232 line driver/receiver with plus-or-minus 15-kV IEC-ESD protection. Place the transceiver near the connector, preserve a low-impedance ground return, and verify the charge-pump capacitor arrangement in the manufacturer documentation.

🔧

Test and Measurement Equipment

The MAX3386ECPW is useful in test and measurement instruments that exchange commands and results through an RS-232 service port. A three-driver, two-receiver arrangement can reduce the number of separate interface devices needed when the instrument has several control outputs and two status inputs. The 250-kbps rate is suitable for typical instrument-control traffic, and the 3- to 5.5-V range supports common embedded logic levels. The integrated plus-or-minus 15-kV IEC-ESD protection is valuable on externally accessible equipment, although the final enclosure, connector, and grounding design remain important for reliable field operation.

📡

Data Acquisition Systems

The MAX3386ECPW can connect a data-acquisition controller to an RS-232 instrument or peripheral when the system requires several transmit channels and two receive channels. The 250-kbps operating limit is suitable for slow control, status, and configuration traffic, while the separate logic supply pin helps integrate the interface with modern digital circuitry. Designers should use the manufacturer’s recommended charge-pump capacitors, keep the RS-232 traces away from sensitive measurement inputs, and provide a reliable signal-ground connection. The exact operating temperature and ESD implementation details should be confirmed in the MAX3386E datasheet for the intended installation environment.

🖥️

Embedded Serial Consoles

The MAX3386ECPW is appropriate for embedded systems that need an RS-232 console or service interface without using a full-size legacy transceiver arrangement. The 20-pin TSSOP package supports compact PCB layouts, while the 3- to 5.5-V supply range accommodates common embedded rails. Three drivers and two receivers can handle command, status, and handshake paths when the host system requires more than a single bidirectional channel. Keep the connector-side protection and ground layout close to the transceiver, and confirm that the selected logic levels and enable behavior match the host UART and system power sequencing.

💳

Point-of-Sale and Peripheral Equipment

The MAX3386ECPW can support RS-232 connections between point-of-sale terminals, peripherals, and service equipment where multiple command and status lines are useful. Its three transmitters and two receivers match the type of channel arrangement often needed for hardware handshakes and peripheral control. The 250-kbps data rate is well matched to legacy serial-peripheral traffic, and the compact 20-pin TSSOP package simplifies board integration. The protected RS-232 pins help improve robustness in user-accessible equipment, but the complete design should still include suitable connector grounding, cable routing, and system-level transient protection.

📊

Instrumentation and Laboratory Interfaces

The MAX3386ECPW is a good fit for laboratory and process-instrument interfaces that combine a microcontroller or embedded controller with an RS-232 host. The 250-kbps rate supports command and measurement-status exchange, while the three-driver, two-receiver configuration allows several control or acknowledgment signals. Its 3- to 5.5-V operation supports both 3.3-V and 5-V digital sections, and the integrated ESD protection is valuable in equipment that may be connected and disconnected during maintenance. Follow the manufacturer’s recommended capacitor and routing guidance, isolate the interface from analog inputs, and verify the operating-temperature range for laboratory or industrial deployment.

What is the MAX3386ECPW?
The MAX3386ECPW is a 3-driver, 2-receiver RS-232 transceiver from Texas Instruments. It operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and includes plus-or-minus 15-kV IEC-ESD protection. The manufacturer identifies the MAX3386E family as a line-driver/receiver device with a logic supply pin, and the listed package is 20-pin TSSOP.
What is the operating voltage of MAX3386ECPW?
The MAX3386ECPW operates from 3 V to 5.5 V according to the Texas Instruments MAX3386E product information. This range allows the interface to work with 3.3-V and 5-V logic systems while providing RS-232 driver and receiver functions. Confirm the individual VCC and VEE pin connections in the manufacturer datasheet before finalizing the power architecture.
How fast can MAX3386ECPW transmit data?
The MAX3386ECPW supports a maximum data rate of 250 kbps. Texas Instruments describes the MAX3386E as a 250-kbps RS-232 line driver/receiver. The usable system rate also depends on cable length, clocking, signal integrity, and the connected RS-232 equipment, so the 250-kbps figure should be treated as the device specification rather than a guaranteed end-to-end throughput.
How many RS-232 drivers and receivers does MAX3386ECPW have?
The MAX3386ECPW contains three RS-232 drivers and two RS-232 receivers. This 3-to-2 arrangement supports multi-channel serial-interface designs, including systems with more outbound channels than inbound channels. The distributor identification for the exact MAX3386ECPW specifies a 3/2 full-RS-232 transceiver in a 20-pin TSSOP package.
What ESD protection does MAX3386ECPW provide?
The MAX3386ECPW provides plus-or-minus 15-kV IEC-ESD protection on its RS-232 inputs and outputs. Texas Instruments lists the MAX3386E as a 3- to 5.5-V RS-232 line driver/receiver with plus-or-minus 15-kV IEC-ESD protection. Protection ratings help with electrostatic-discharge exposure, but they do not replace proper connector design, grounding, and board layout.
Where can I download the MAX3386ECPW datasheet PDF?
The official Texas Instruments MAX3386E product page is the appropriate starting point for the MAX3386ECPW datasheet and supporting documentation. The manufacturer page is identified as https://www.ti.com/product/MAX3386E. Use the ordering information and package details on that page to confirm that the MAX3386ECPW ordering code corresponds to the required 20-pin TSSOP configuration.
Where can I find the MAX3386ECPW pinout?
The MAX3386ECPW pinout is documented in the Texas Instruments MAX3386E manufacturer documentation, with the product page located at https://www.ti.com/product/MAX3386E. Use the pin-description table and package drawing in the datasheet when assigning connector signals and charge-pump capacitor connections. The distributor listing confirms the package as 20-pin TSSOP.
Can MAX3386ECPW replace MAX3232ECPWR?
The MAX3232ECPWR is a separate 3-to-5.5-V RS-232 interface device, but the exact pin and channel differences must be checked before treating it as a drop-in replacement. The MAX3386ECPW is specifically listed as a 3-driver, 2-receiver device in 20-pin TSSOP, whereas the MAX3232 product is a different RS-232 interface family. Use the manufacturer pin tables and channel requirements to verify compatibility.
What is the best drop-in replacement for MAX3386ECPW?
The best replacement must match the MAX3386ECPW’s 20-pin TSSOP footprint, three-driver/two-receiver channel arrangement, 3- to 5.5-V supply range, and RS-232 signal requirements. MAX3386EIPWR and MAX3386EEUP+ are same-family MAX3386E references, while SP3203ECY-L/TR is a 20-pin TSSOP RS-232 transceiver alternative identified in the component data. Confirm pin-level compatibility and electrical ratings in the relevant manufacturer documentation.
Is MAX3386ECPW suitable for industrial equipment?
The MAX3386ECPW is suitable for RS-232 interfaces in industrial-control and instrumentation systems when the design stays within the device’s specified voltage, data-rate, temperature, and ESD requirements. Its 250-kbps rate and 3- to 5.5-V supply fit many embedded and industrial serial-control designs. The operating-temperature limits and exact compliance claims should be checked in the MAX3386E datasheet.
MAX3386ECPW vs MAX3386EIPWR - which is better?
MAX3386EIPWR is a same-family MAX3386E comparison part, so the primary selection criteria are ordering suffix, package, temperature grade, and lifecycle requirements rather than a change in the basic 3-driver, 2-receiver RS-232 function. The MAX3386ECPW is the exact target listed as a 20-pin TSSOP device. Check the ordering table and pin-compatible package details before substitution.
What is the difference between MAX3386ECPW and SP3203ECY-L/TR?
Both MAX3386ECPW and SP3203ECY-L/TR are identified in the component listings as 20-pin TSSOP RS-232 transceivers, but a mechanical package match alone does not guarantee a safe replacement. Compare the number of drivers and receivers, supply pins, charge-pump capacitor values, logic thresholds, data rate, ESD rating, and exact pin assignments. The MAX3386ECPW reference specifically identifies a 3/2 transceiver from Texas Instruments.
What can replace MAX3386ECPW?
MAX3386EIPWR, MAX3386EEUP+, and SP3203ECY-L/TR are candidate replacements for the MAX3386ECPW because the component references identify same-family or 20-pin TSSOP RS-232 alternatives. The strongest candidate is the one whose manufacturer datasheet confirms the same footprint, pin assignment, three drivers, two receivers, supply arrangement, and electrical limits. Verify the comparison before committing to a PCB substitution.
Is MAX3386ECPW the same as MAX3386EEUP+?
MAX3386ECPW and MAX3386EEUP+ belong to the same MAX3386E family and are both associated with 20-pin TSSOP RS-232 transceivers, but they are distinct ordering codes. The comparison search identifies them as related variants, not automatically identical products. Confirm suffix-specific temperature, packaging, and lead-free details in the Texas Instruments ordering information before treating them as interchangeable.
What are the key specifications of MAX3386ECPW that engineers should know?
The key MAX3386ECPW specifications are a 3- to 5.5-V supply range, 250-kbps maximum data rate, three drivers, two receivers, plus-or-minus 15-kV IEC-ESD protection, and a 20-pin TSSOP package. The Texas Instruments MAX3386E product page also identifies a logic supply pin. These parameters define the part’s core suitability for compact RS-232 links in embedded and industrial systems.
Where can I buy MAX3386ECPW and what is its lead time?
Use the Request a Quote form on this page to request current MAX3386ECPW availability, commercial terms, and lead time from XAIPART. The current manufacturer and distributor listings establish the part’s identity and sourcing channels, but a live quotation is required for the current delivery commitment. Do not treat a distributor search result as confirmation of current stock.
Is MAX3386ECPW in stock?
The MAX3386ECPW is actively listed by Texas Instruments and appears in current distributor component listings, but a definitive stock statement should be obtained through the Request a Quote form on this page. Stock levels change by region, quantity, and lot availability. For production planning, request the current quantity, lead time, and delivery schedule before releasing the order.

Technische Referenzdaten für MAX3386ECPW – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MAX3386ECPW when the design requires a 3-driver, 2-receiver RS-232 interface, a 3- to 5.5-V supply, and plus-or-minus 15-kV IEC-ESD protection in a 20-pin TSSOP package. MAX3386EIPWR is the first same-family alternative to evaluate when its ordering suffix, temperature range, and qualification details meet the design requirements. MAX3386EEUP+ is another same-family candidate for footprint reuse, but verify its exact ordering information. SP3203ECY-L/TR is a cross-brand 20-pin TSSOP candidate listed as a 3/2 RS-232 transceiver; use it only after checking pin mapping, supply pins, charge-pump capacitors, logic thresholds, and electrical limits. The MAX3386ECPW is the clearest choice when the target system depends on the documented MAX3386E function and protection rating.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3386EIPWR MAX3386EEUP+ SP3203ECY-L/TR
Brand Texas Instruments Texas Instruments Texas Instruments MaxLinear, Inc.
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Transceiver Configuration 3 drivers / 2 receivers 3 drivers / 2 receivers 3 drivers / 2 receivers 3/2 full RS-232 transceiver
RS-232 Interface EIA/TIA-232 EIA/TIA-232 EIA/TIA-232 RS-232

Wichtigste Unterscheidungsmerkmale

  • Three-driver, two-receiver channel arrangement (vs. MAX3232ECPWR)
  • 3- to 5.5-V operation with integrated ESD protection (vs. SP3203ECY-L/TR)
  • Compact 20-pin TSSOP integration (vs. MAX3386EIPWR)

Designhinweise

Place the MAX3386ECPW close to the RS-232 connector and route the three driver outputs and two receiver inputs as short, controlled-impedance traces. Keep these traces away from sensitive analog inputs and high-speed switching nodes. Use the manufacturer pin-description and typical-application diagrams to assign the connector signals and preserve the intended ground-return path.

Do not substitute a generic 1-driver, 1-receiver RS-232 IC without checking the complete pin map. The MAX3386ECPW has three drivers and two receivers, and its logic supply and charge-pump connections must be connected according to the manufacturer schematic. Confirm capacitor values, supply sequencing, and connector-side signal names against the MAX3386E datasheet before fabrication.

Use a continuous ground reference between the transceiver ground and the RS-232 connector shield or signal ground, and keep the return-current path short. The integrated plus-or-minus 15-kV IEC-ESD protection improves device robustness, but it does not replace good cable management, connector selection, or chassis grounding. Review the ESD application guidance when the interface is exposed to user-accessible connectors.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product information identifies plus-or-minus 15-kV IEC-ESD protection. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status require confirmation from the relevant product documentation or ordering information.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX3386ECPW datasheet MAX3386ECPW specifications MAX3386ECPW pinout MAX3386ECPW datasheet PDF MAX3386ECPW replacement MAX3386ECPW equivalent MAX3386ECPW cross reference MAX3386ECPW vs MAX3386EIPWR MAX3386ECPW 20-TSSOP MAX3386ECPW RS-232 transceiver Texas Instruments MAX3386ECPW MAX3386ECPW price MAX3386ECPW stock MAX3386ECPW industrial RS-232 MAX3386ECPW footprint

Verwandte Bauteile & Begriffe

Texas Instruments MAX3386ECPW MAX3386EIPWR MAX3386EEUP+ SP3203ECY-L/TR RS-232 EIA/TIA-232 RS-232 transceiver line driver line receiver 3 to 5.5 V 250 kbps 15 kV IEC-ESD protection logic supply pin 20-pin TSSOP TSSOP-20 surface mount charge-pump interface industrial control test and measurement data acquisition embedded RS-232 point-of-sale equipment instrumentation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen