MAX3386ECPW - 3 to 5.5V RS-232 Transceiver | Texas Instruments
Référence : MAX3386ECPW ✓ ActifMAX3386ECPW Présentation
An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions for communicating between equipment over the RS-232 standard. The MAX3386ECPW converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. Its 3- to 5.5-V operating range supports both 3.3-V and 5-V system rails, while the 250-kbps data rate is suitable for moderate-speed serial links.
Key features include three RS-232 drivers, two RS-232 receivers, a separate logic supply pin, and plus-or-minus 15-kV IEC-ESD protection on the RS-232 inputs and outputs. The family is positioned for industrial-control, instrumentation, data-acquisition, and embedded equipment interfaces where a compact transceiver and electrostatic-discharge resilience are useful. The MAX3386ECPW is a member of the MAX3386E family, also identified by the manufacturer as the MAX3386E product page.
The MAX3386E architecture uses charge-pump circuitry internally to generate the RS-232 transmit voltage levels. The logic-side supply and the driver-side supply arrangement allow the interface to operate with modern low-voltage digital logic while maintaining RS-232-compatible signal levels at the connector. The integrated protection helps reduce damage from electrostatic discharge events encountered during handling or field installation, although the complete system still requires appropriate board-level grounding and signal routing.
Typical applications include industrial serial controllers, test and measurement equipment, barcode and data-acquisition systems, point-of-sale equipment, and embedded RS-232 links. The device is especially appropriate when the design needs three transmit channels and two receive channels rather than a one-driver, one-receiver RS-232 transceiver.
When laying out a board using the MAX3386ECPW, place the device near the RS-232 connector and route driver and receiver traces away from sensitive analog or high-speed digital signals. Maintain the connector-side ground path and follow the manufacturer’s recommended charge-pump capacitor connections. Confirm the logic supply voltage, RS-232 connector pin assignment, and the required charge-pump capacitors during schematic and layout review.
This page combines the manufacturer’s MAX3386E product information, distributor identification, package details, application guidance, and structured replacement information. It is intended to help engineers evaluate the MAX3386ECPW for RS-232 interface designs while checking exact pin, electrical, and compliance details against the manufacturer datasheet.
Alternatives de remplacement direct pour MAX3386ECPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX3386ECPW (même facteur de forme et même empreinte) — différant par ESD Protection, Product Type.
MAX3386EIPWR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3386EEUP+
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →SP3203ECY-L/TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3386ECPW Spécifications
| Product Type | RS-232 line driver/receiver |
| Transceiver Configuration | 3 drivers / 2 receivers |
| Supply Voltage Range | 3 V to 5.5 V |
| Débit de données | 250 kbps |
| ESD Protection | +/-15 kV IEC-ESD |
| Logic Supply Pin | Yes |
| RS-232 Interface | EIA/TIA-232 |
| Boîtier | 20-pin TSSOP |
| Package Type | TSSOP-20 |
| Type de montage | Surface Mount |
| Number of Drivers | 3 |
| Number of Receivers | 2 |
| Operating Voltage | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Input ESD Rating | +/-15 kV IEC-ESD |
| Output ESD Rating | +/-15 kV IEC-ESD |
| Supplier Supply | Texas Instruments |
| Manufacturer Product Page | MAX3386E |
Guide de configuration des broches du MAX3386ECPW tssop-20
Configuration des broches du MAX3386ECPW (boîtier tssop-20). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX3386ECPW.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX3386ECPW convient pour 6 applications: Industrial Control Serial Links, Test and Measurement Equipment, Data Acquisition Systems, Embedded Serial Consoles, Point-of-Sale and Peripheral Equipment, Instrumentation and Laboratory Interfaces.
Industrial Control Serial Links
The MAX3386ECPW fits industrial control equipment that needs a compact RS-232 interface alongside a 3.3-V or 5-V controller. Its three drivers support multiple outbound control channels, while two receivers can monitor two incoming status signals. The 250-kbps maximum data rate is appropriate for configuration, diagnostic, and supervisory communications rather than high-bandwidth streaming. Texas Instruments identifies the MAX3386E as a 3- to 5.5-V RS-232 line driver/receiver with plus-or-minus 15-kV IEC-ESD protection. Place the transceiver near the connector, preserve a low-impedance ground return, and verify the charge-pump capacitor arrangement in the manufacturer documentation.
Recommandé
Test and Measurement Equipment
The MAX3386ECPW is useful in test and measurement instruments that exchange commands and results through an RS-232 service port. A three-driver, two-receiver arrangement can reduce the number of separate interface devices needed when the instrument has several control outputs and two status inputs. The 250-kbps rate is suitable for typical instrument-control traffic, and the 3- to 5.5-V range supports common embedded logic levels. The integrated plus-or-minus 15-kV IEC-ESD protection is valuable on externally accessible equipment, although the final enclosure, connector, and grounding design remain important for reliable field operation.
Recommandé
Data Acquisition Systems
The MAX3386ECPW can connect a data-acquisition controller to an RS-232 instrument or peripheral when the system requires several transmit channels and two receive channels. The 250-kbps operating limit is suitable for slow control, status, and configuration traffic, while the separate logic supply pin helps integrate the interface with modern digital circuitry. Designers should use the manufacturer’s recommended charge-pump capacitors, keep the RS-232 traces away from sensitive measurement inputs, and provide a reliable signal-ground connection. The exact operating temperature and ESD implementation details should be confirmed in the MAX3386E datasheet for the intended installation environment.
Recommandé
Embedded Serial Consoles
The MAX3386ECPW is appropriate for embedded systems that need an RS-232 console or service interface without using a full-size legacy transceiver arrangement. The 20-pin TSSOP package supports compact PCB layouts, while the 3- to 5.5-V supply range accommodates common embedded rails. Three drivers and two receivers can handle command, status, and handshake paths when the host system requires more than a single bidirectional channel. Keep the connector-side protection and ground layout close to the transceiver, and confirm that the selected logic levels and enable behavior match the host UART and system power sequencing.
Recommandé
Point-of-Sale and Peripheral Equipment
The MAX3386ECPW can support RS-232 connections between point-of-sale terminals, peripherals, and service equipment where multiple command and status lines are useful. Its three transmitters and two receivers match the type of channel arrangement often needed for hardware handshakes and peripheral control. The 250-kbps data rate is well matched to legacy serial-peripheral traffic, and the compact 20-pin TSSOP package simplifies board integration. The protected RS-232 pins help improve robustness in user-accessible equipment, but the complete design should still include suitable connector grounding, cable routing, and system-level transient protection.
Recommandé
Instrumentation and Laboratory Interfaces
The MAX3386ECPW is a good fit for laboratory and process-instrument interfaces that combine a microcontroller or embedded controller with an RS-232 host. The 250-kbps rate supports command and measurement-status exchange, while the three-driver, two-receiver configuration allows several control or acknowledgment signals. Its 3- to 5.5-V operation supports both 3.3-V and 5-V digital sections, and the integrated ESD protection is valuable in equipment that may be connected and disconnected during maintenance. Follow the manufacturer’s recommended capacitor and routing guidance, isolate the interface from analog inputs, and verify the operating-temperature range for laboratory or industrial deployment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3386ECPW — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3386EIPWR | MAX3386EEUP+ | SP3203ECY-L/TR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | MaxLinear, Inc. |
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Transceiver Configuration | 3 drivers / 2 receivers | 3 drivers / 2 receivers | 3 drivers / 2 receivers | 3/2 full RS-232 transceiver |
| RS-232 Interface | EIA/TIA-232 | EIA/TIA-232 | EIA/TIA-232 | RS-232 |
Principaux différenciateurs
- Three-driver, two-receiver channel arrangement (vs MAX3232ECPWR)
- 3- to 5.5-V operation with integrated ESD protection (vs SP3203ECY-L/TR)
- Compact 20-pin TSSOP integration (vs MAX3386EIPWR)
Notes de conception
Place the MAX3386ECPW close to the RS-232 connector and route the three driver outputs and two receiver inputs as short, controlled-impedance traces. Keep these traces away from sensitive analog inputs and high-speed switching nodes. Use the manufacturer pin-description and typical-application diagrams to assign the connector signals and preserve the intended ground-return path.
Do not substitute a generic 1-driver, 1-receiver RS-232 IC without checking the complete pin map. The MAX3386ECPW has three drivers and two receivers, and its logic supply and charge-pump connections must be connected according to the manufacturer schematic. Confirm capacitor values, supply sequencing, and connector-side signal names against the MAX3386E datasheet before fabrication.
Use a continuous ground reference between the transceiver ground and the RS-232 connector shield or signal ground, and keep the return-current path short. The integrated plus-or-minus 15-kV IEC-ESD protection improves device robustness, but it does not replace good cable management, connector selection, or chassis grounding. Review the ESD application guidance when the interface is exposed to user-accessible connectors.
Informations de conformité
The manufacturer product information identifies plus-or-minus 15-kV IEC-ESD protection. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status require confirmation from the relevant product documentation or ordering information.