Analog Devices

MAX3388ECUG+T - 2.5V 460kbps RS-232 Transceiver | Analog Devices

Teilenummer: MAX3388ECUG+T ✓ Aktiv
2.5 V Vdss 24-TSSOP Package
MOQ: 1 |

MAX3388ECUG+T Übersicht

Analog Devices MAX3388ECUG+T is a 2.5V-powered RS-232 transceiver with three drivers, two receivers, 460kbps data-rate capability, and enhanced 15kV electrostatic-discharge protection in a 24-TSSOP package. It is designed for portable systems that require a low-voltage, low-power communications interface.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and an RS-232 link. The MAX3388E family implements the electrical drivers and receivers required by EIA/TIA-232, also associated with V.28 and V.24 communications interfaces. Within the electronic-component hierarchy, it is a transceiver, interface IC, communications semiconductor, and low-voltage serial-interface device.

Three RS-232 drivers support multiple outbound channels, while two receivers support two inbound channels. The 2.5V supply allows the device to operate from a low-voltage system rail without requiring a conventional 5V RS-232 supply. Its 460kbps maximum data rate makes it suitable for equipment whose serial links must transfer commands, configuration data, status information, or short data packets quickly.

Enhanced electrostatic-discharge protection rated to 15kV is a major feature for connectors that can be touched during installation or connected to external cables. The protection is especially relevant to PDAs, mobile equipment, and industrial control systems where an RS-232 port may be exposed to electrostatic discharge. The manufacturer describes the MAX3388E and MAX3389E as low-power, high-data-rate communications interfaces with enhanced ESD protection.

Typical uses include personal digital assistants, cellular phones, point-of-sale equipment, data acquisition units, industrial controllers, and service interfaces. The three-driver, two-receiver arrangement suits asymmetric links in which a controller sends commands to multiple peripherals while receiving responses from up to two devices. A system using fewer channels can disable unused drivers and receivers according to the device interface guidance.

Designers should account for RS-232 level translation at the connector, protect the supply rail, and verify that signal rates and cable characteristics suit the intended link. Decoupling capacitors should be placed close to the supply and ground pins, while external driver and receiver networks should follow the manufacturer application guidance. The 24-TSSOP package also requires a PCB footprint consistent with its 0.65mm pitch.

This product page combines manufacturer-interface details, package identification, ESD and data-rate specifications, drop-in alternatives, application guidance, and PCB-focused design considerations to support component selection and implementation. It is intended to help engineers evaluate electrical compatibility and make a board-level replacement decision without relying on family-level descriptions alone.

Drop-in-Alternativen für MAX3388ECUG+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3388ECUG+T (gleiche Bauform und Footprint) – abweichend in Driver Count, ESD Protection, Receiver Count.

Maxim Integrated
Driver Count: 3
ESD Protection: ±15 kV
Receiver Count: 2
Vergleichen mit MAX3388ECUG+T →

MAX3388EEUG+T

✅ Drop-In
Maxim Integrated
📦 24-TSSOP
RS-232 transceiver · 3 drivers and 2 receivers · 2.5 V · 460 kbps · ±15 kV · EIA/TIA-232 and V.28/V.24 · 24-TSSOP · 4.40 mm

Preis auf Anfrage

Datenblatt ansehen →

MAX3389EEUG+T

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 24-TSSOP
Same 24-TSSOP format, 2.5V supply, 460kbps rate, three drivers and two receivers; MAX3389-specific interface details must be checked

📋 Referenzalternative (nicht im Katalog)

MAX3388ECUG+T Technische Daten

Product Type RS-232 transceiver
Versorgungsspannung 2.5 V
Datenrate 460 kbps
Driver Count 3 drivers
Receiver Count 2 receivers
Duplex Mode Full duplex
ESD Protection 15 kV
Interface Standard EIA/TIA-232
Related Interface V.28/V.24
Gehäuse 24-TSSOP
Package Pin Count 24 pins
Package Pitch 0.65 mm
Montageart Surface mount
Factory Pack Quantity 2500 units

MAX3388ECUG+T 0.65 mm Pinbelegungsleitfaden

Pinbelegung für MAX3388ECUG+T (0.65 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3388ECUG+T im 0.65 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3388ECUG+T.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3388ECUG+T ist geeignet für 6 Anwendungs: PDA Serial Connectivity, Cellular Phone Accessory Interface, Industrial Controller Service Port, Point-of-Sale Terminal, Data Acquisition Unit, Instrumentation and Test Equipment.

📱

PDA Serial Connectivity

The MAX3388ECUG+T fits a personal digital assistant that needs a low-voltage RS-232 connection for synchronization, configuration, or accessory communication. Its 2.5V supply requirement aligns with compact portable systems, while the 460kbps data rate allows commands and status data to move efficiently over the UART link. The three-driver and two-receiver arrangement can support several peripheral paths when the product architecture requires them. The 15kV ESD protection is especially relevant where the connector is accessible during charging, docking, or field service. Use the manufacturer pin descriptions and application diagram to assign the connector-side signals, and keep the external RS-232 lines away from sensitive logic routes.

📱

Cellular Phone Accessory Interface

The MAX3388ECUG+T can provide a robust RS-232 compatibility path in cellular phones and related accessory equipment operating from a low-voltage rail. Because the manufacturer identifies PDAs and cell phones as target applications, the device's 2.5V supply and enhanced 15kV ESD protection align with compact equipment exposed to electrostatic discharge. A 460kbps channel supports firmware-related commands, diagnostic information, and accessory-control traffic without requiring a higher-voltage RS-232 source. Board designers should use a compliant connector and level-shift network, maintain a short return-path arrangement, and verify the enabled-driver and receiver states against the intended power-consumption profile.

🏭

Industrial Controller Service Port

The MAX3388ECUG+T is suitable for an industrial controller that exposes a service or configuration port using RS-232. Its 460kbps data rate supports command downloads, diagnostic messages, and periodic status exchanges, while three drivers and two receivers provide flexibility for a multi-drop service architecture. The 15kV ESD protection helps the interface withstand electrostatic discharge encountered around equipment installation and maintenance. The 2.5V operating supply simplifies integration with a modern embedded control rail, but it does not replace the external bipolar RS-232 signal interface. Follow the manufacturer application circuit for connector-side components and define cable length and grounding for the installation environment.

🏭

Point-of-Sale Terminal

The MAX3388ECUG+T can serve a point-of-sale terminal or peripheral controller that needs a compact RS-232 communications link. The interface supports a maximum 460kbps data rate, which is useful for transaction-related commands, receipt data, device status, and configuration exchanges. A 2.5V supply reduces the need for a separate conventional RS-232 supply rail in compact systems, while the 15kV ESD rating adds protection for connector-accessible equipment. The three transmitter and two receiver channels allow the host to address several accessories when that topology is electrically appropriate. Validate the external driver network, connector pin definition, and UART baud-rate tolerance in the complete peripheral arrangement.

📟

Data Acquisition Unit

The MAX3388ECUG+T fits a data-acquisition unit that accepts configuration commands and reports measurements through an RS-232 management channel. The 460kbps maximum data rate supports responsive control and status traffic, and the 2.5V operating supply can simplify integration with low-voltage embedded electronics. Two receivers are available for inbound channels, while three drivers can support separate outbound commands or responses. The 15kV ESD protection improves robustness when the serial port connects to external instrumentation or a long cable route. Designers should isolate the communications connector as needed, observe the manufacturer's external-component recommendations, and ensure that the selected UART and cable arrangement preserve signal integrity at the operating data rate.

🔧

Instrumentation and Test Equipment

The MAX3388ECUG+T can support the control and response port of portable or bench instrumentation where RS-232 remains a practical interface. Its low 2.5V supply requirement suits compact mixed-signal systems, and the 460kbps capability allows commands and measurement-status information to pass efficiently over a short serial link. The three-driver and two-receiver structure provides more channels than a basic one-driver, one-receiver RS-232 implementation, enabling a more flexible instrument topology. The enhanced 15kV ESD protection is valuable for frequently connected test leads and service ports. Validate the complete connector circuit against the manufacturer application diagram and account for ground offsets between separately powered instruments.

Zusammenfassung der empfohlenen Produkte

MAX3388EEUG+T Maxim Integrated Verwendet in: PDA Serial Connectivity, Cellular Phone Accessory Interface, Industrial Controller Service Port, Point-of-Sale Terminal, Data Acquisition Unit, Instrumentation and Test Equipment MAX3389EEUG+T Closely related low-voltage transceiver Verwendet in: PDA Serial Connectivity, Cellular Phone Accessory Interface, Industrial Controller Service Port, Point-of-Sale Terminal, Data Acquisition Unit, Instrumentation and Test Equipment
What is the MAX3388ECUG+T?
The MAX3388ECUG+T is a 2.5V-powered, 460kbps RS-232 transceiver with three drivers, two receivers, and 15kV electrostatic-discharge protection. According to the manufacturer datasheet, it implements EIA/TIA-232 and V.28/V.24 communications interfaces for low-power portable equipment. The device is packaged in a 24-TSSOP package and is intended for systems that need several RS-232 channels without using a conventional 5V interface supply.
What are the key specifications of MAX3388ECUG+T that engineers should know?
The MAX3388ECUG+T combines a 2.5V supply, three RS-232 drivers, two receivers, a maximum data rate of 460kbps, and 15kV ESD protection in a 24-TSSOP package. According to the manufacturer datasheet, it supports EIA/TIA-232 and V.28/V.24 interfaces. The unequal three-driver and two-receiver arrangement should be considered when allocating RS-232 channels, while the 0.65mm package pitch requires a compatible PCB footprint.
Where can I download the MAX3388ECUG+T datasheet PDF?
The MAX3388ECUG+T datasheet PDF is available through the document link on this product page and through the listed Maxim Integrated document copy. According to the manufacturer datasheet, the MAX3388E family includes two receivers, three drivers, low-power operation from 2.5V, a high data rate of 460kbps, and enhanced 15kV ESD protection. Use the pin-description and application diagrams in that document when assigning board connections.
Where can I find the MAX3388ECUG+T pinout?
Use the 24-pin pin-description table in the manufacturer datasheet to locate every MAX3388ECUG+T connection, including supply, ground, driver outputs, and receiver inputs. The component uses a 24-TSSOP package with a 0.65mm pitch. Because the exact numbered pin assignments are not reproduced on this page, consult the datasheet before routing a replacement board and verify orientation against the package drawing.
What can replace the MAX3388ECUG+T on the same PCB?
The MAX3388EEUG+T is a drop-in candidate because the manufacturer documents the same 24-TSSOP format and a 460kbps data rate. A second same-family option is the MAX3389EEUG+T, which is also a 2.5V, 460kbps, three-driver and two-receiver RS-232 transceiver in the same package family. Confirm temperature grade, shutdown behavior, and production status in the device documentation before approving either replacement.
Is MAX3388EEUG+T the same as MAX3388ECUG+T?
The MAX3388EEUG+T and MAX3388ECUG+T use the same 24-TSSOP package and provide a 460kbps RS-232 interface, but ordering suffixes can distinguish temperature grade or qualification rather than the basic circuit function. According to the manufacturer datasheet family information, both belong to the MAX3388E low-power RS-232 interface range. Compare the full ordering table and absolute maximum ratings before treating them as production-equivalent.
What is the best Analog Devices equivalent for MAX3388ECUG+T?
The MAX3388EEUG+T is the closest documented same-brand equivalent because it retains the 24-TSSOP package, three-driver and two-receiver configuration, 2.5V operation, and 460kbps data rate. For designs that can move to a closely related family, the MAX3389EEUG+T is another same-package option. Final approval should account for enable, shutdown, temperature-range, and qualification differences rather than footprint alone.
When should I choose MAX3388ECUG+T instead of MAX3388EEUG+T?
Choose the MAX3388ECUG+T when the exact ordering code, temperature range, and qualification requirements match the original design. The MAX3388EEUG+T is appropriate when its ordering-table parameters are acceptable and its 24-TSSOP layout, 460kbps rate, and channel arrangement remain unchanged. Since suffix changes can affect qualification or temperature coverage, make the choice from the complete device ordering information rather than from the interface functions alone.
Is MAX3388ECUG+T suitable for mobile and PDA equipment?
The MAX3388ECUG+T is suitable for mobile and PDA equipment because the manufacturer identifies these applications and specifies 2.5V-powered operation with enhanced 15kV ESD protection. Its 460kbps data rate supports faster command and status transfer than a low-speed serial link, while the three-driver and two-receiver arrangement supports multi-channel serial connectivity. Board-level ESD and cable-routing practices remain necessary.
How much power does the MAX3388ECUG+T need?
The MAX3388ECUG+T operates from a 2.5V supply, allowing it to use a low-voltage system rail. The exact supply-current limit and typical operating current must be taken from the manufacturer datasheet because they depend on enabled drivers, receiver state, data activity, and supply voltage. Confirm those values against the worst-case operating state of the design before sizing the rail and decoupling network.
Does MAX3388ECUG+T support 460kbps data rates?
Yes, the MAX3388ECUG+T supports data rates up to 460kbps according to the manufacturer datasheet and the published comparison information for the device. This rate makes the transceiver suitable for short-distance control, configuration, and data-transfer links. Actual system throughput also depends on the host UART, cable characteristics, signal integrity, grounding, and the load presented by the connected equipment.
Why does the MAX3388ECUG+T have 15kV ESD protection?
The MAX3388ECUG+T uses enhanced electrostatic-discharge protection rated to 15kV because externally accessible RS-232 connectors can receive ESD events during handling or cable installation. According to the manufacturer datasheet, this protection is a defining feature of the MAX3388E interface family. It improves device robustness but does not replace correct board layout, controlled connector grounding, and system-level ESD procedures.
How does MAX3388ECUG+T compare with MAX3388EEUG+T?
The MAX3388ECUG+T and MAX3388EEUG+T share the core 24-TSSOP interface format, three-driver and two-receiver arrangement, 2.5V supply, and 460kbps data rate. The meaningful selection issue is the ordering suffix, which can encode temperature or qualification differences. According to the manufacturer ordering information, compare the complete parameter table rather than assuming that every suffix-level variant is interchangeable in every end application.
Where can I buy MAX3388ECUG+T online?
Use the Request a Quote form on this page to request MAX3388ECUG+T pricing, stock confirmation, and lead time from XAIPART. Quote requests provide the exact MPN and required commercial terms to the supplier, avoiding ambiguity with closely related MAX3388E order codes. Submit the target MAX3388ECUG+T MPN unchanged because package, temperature grade, and tape-and-reel ordering details distinguish it from other family members.
What is the price and lead time for MAX3388ECUG+T?
Current MAX3388ECUG+T pricing and lead time are obtained through the Request a Quote form on this page. The form should be submitted with the complete MPN MAX3388ECUG+T and the required quantity, shipment destination, and date needed. Because production schedules and component availability can change, request written confirmation rather than relying on a family-level price or an unqualified market reference.
Is MAX3388ECUG+T in stock?
Use the Request a Quote form on this page to obtain a current stock response for MAX3388ECUG+T. The form captures the exact MPN and requested quantity so the availability answer applies to the correct 24-TSSOP ordering code. For production planning, request both immediate availability and the lead time for your scheduled quantity, and plan lead time conservatively because inventory can change between quotations.

Technische Referenzdaten für MAX3388ECUG+T – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MAX3388ECUG+T when the original design specifies that exact ordering code and needs a 2.5V, 460kbps RS-232 interface with three drivers, two receivers, and 15kV ESD protection in a 24-TSSOP package. Choose the MAX3388EEUG+T when its full ordering parameters satisfy the temperature and qualification requirements; it retains the documented package format, supply voltage, channel count, and data rate, making it the closest listed drop-in candidate. Consider the MAX3389EEUG+T when its family-specific behavior and documented functions meet the interface requirements and the footprint, 2.5V supply, 460kbps rate, and channel arrangement remain acceptable. For every replacement, verify the numbered pin functions, absolute maximum ratings, enable or shutdown behavior, operating temperature range, and external RS-232 component network. A matching package is necessary for PCB reuse but does not by itself prove that every electrical and qualification condition is identical.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3388EEUG+T MAX3389EEUG+T
Package 24-TSSOP 24-TSSOP 24-TSSOP
Brand Analog Devices Analog Devices Analog Devices
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage 2.5 V 2.5 V 2.5 V
Data Rate 460 kbps 460 kbps 460 kbps
Driver Count 3 drivers 3 drivers 3 drivers
Receiver Count 2 receivers 2 receivers 2 receivers
ESD Protection 15 kV 15 kV 15 kV
Interface Standard EIA/TIA-232, V.28/V.24 EIA/TIA-232, V.28/V.24 EIA/TIA-232, V.28/V.24
Duplex Mode Full duplex Full duplex Full duplex

Wichtigste Unterscheidungsmerkmale

  • Direct 2.5V interface operation (vs. MAX3388EEUG+T)
  • Identical channel configuration and data rate (vs. MAX3389EEUG+T)
  • Package reuse for PCB replacement (vs. MAX3388EEUG+T)
  • Connector-accessible ESD resilience (vs. MAX3389EEUG+T)

Designhinweise

Route the connector-side RS-232 driver and receiver traces as a compact group and keep them separate from sensitive clock, sensor, and analog inputs. Maintain a low-impedance ground reference beneath the interface area and follow the manufacturer's application diagram for the external driver and receiver components. Because the MAX3388ECUG+T uses a 24-TSSOP footprint with 0.65mm pitch, verify pad alignment, courtyard clearance, and solder-paste volume on the PCB before releasing the layout.

Do not treat the 2.5V IC supply as an RS-232 connector-level voltage. The interface requires the external transmitter and receiver network specified by the manufacturer to generate and detect compliant bipolar RS-232 signals. Also verify the exact numbered pin assignments and ordering suffix before schematic capture. The MAX3388EEUG+T shares the main package and data-rate characteristics, but temperature, qualification, or functional differences must be checked before substitution.

Place the supply bypass capacitor immediately adjacent to the device's supply and ground connections, with the shortest possible return path. RS-232 driver transitions can create fast edge currents, so avoid routing the connector traces over split ground planes and keep external interface components close to the transceiver. Confirm the transceiver's enabled-channel state and the host UART configuration so idle levels and data transitions do not create unnecessary emissions or unwanted line activity.

Validate the entire communications path at 460kbps rather than checking only the nominal UART baud rate. Cable length, capacitance, grounding, driver loading, and the connected receiver can all affect reliable operation. The MAX3388ECUG+T's 15kV ESD rating improves interface robustness but does not eliminate need for connector design, cable management, and system grounding. Review unused driver and receiver pins using the manufacturer's stated input and enable states.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The component is an RS-232 communications interface IC, not an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX3388ECUG+T datasheet MAX3388ECUG+T pinout MAX3388ECUG+T datasheet pdf MAX3388ECUG+T specifications MAX3388ECUG+T equivalent MAX3388ECUG+T replacement MAX3388ECUG+T cross reference MAX3388ECUG+T vs MAX3388EEUG+T MAX3388ECUG+T price MAX3388ECUG+T stock Analog Devices MAX3388ECUG+T MAX3388ECUG+T 24-TSSOP footprint MAX3388ECUG+T application circuit MAX3388ECUG+T 2.5V RS-232

Verwandte Bauteile & Begriffe

Analog Devices MAX3388ECUG+T MAX3388EEUG+T MAX3389EEUG+T RS-232 transceiver line transceiver interface IC communications semiconductor EIA/TIA-232 V.28 V.24 2.5V power supply 460kbps data rate 15kV ESD protection 24-TSSOP TSSOP family surface-mount package 0.65mm pitch three drivers two receivers full duplex PDA cellular phone electrostatic discharge
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen