MAX3388ECUG+T - 2.5V 460kbps RS-232 Transceiver | Analog Devices
MPN: MAX3388ECUG+T ✓ Hoạt độngMAX3388ECUG+T Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and an RS-232 link. The MAX3388E family implements the electrical drivers and receivers required by EIA/TIA-232, also associated with V.28 and V.24 communications interfaces. Within the electronic-component hierarchy, it is a transceiver, interface IC, communications semiconductor, and low-voltage serial-interface device.
Three RS-232 drivers support multiple outbound channels, while two receivers support two inbound channels. The 2.5V supply allows the device to operate from a low-voltage system rail without requiring a conventional 5V RS-232 supply. Its 460kbps maximum data rate makes it suitable for equipment whose serial links must transfer commands, configuration data, status information, or short data packets quickly.
Enhanced electrostatic-discharge protection rated to 15kV is a major feature for connectors that can be touched during installation or connected to external cables. The protection is especially relevant to PDAs, mobile equipment, and industrial control systems where an RS-232 port may be exposed to electrostatic discharge. The manufacturer describes the MAX3388E and MAX3389E as low-power, high-data-rate communications interfaces with enhanced ESD protection.
Typical uses include personal digital assistants, cellular phones, point-of-sale equipment, data acquisition units, industrial controllers, and service interfaces. The three-driver, two-receiver arrangement suits asymmetric links in which a controller sends commands to multiple peripherals while receiving responses from up to two devices. A system using fewer channels can disable unused drivers and receivers according to the device interface guidance.
Designers should account for RS-232 level translation at the connector, protect the supply rail, and verify that signal rates and cable characteristics suit the intended link. Decoupling capacitors should be placed close to the supply and ground pins, while external driver and receiver networks should follow the manufacturer application guidance. The 24-TSSOP package also requires a PCB footprint consistent with its 0.65mm pitch.
This product page combines manufacturer-interface details, package identification, ESD and data-rate specifications, drop-in alternatives, application guidance, and PCB-focused design considerations to support component selection and implementation. It is intended to help engineers evaluate electrical compatibility and make a board-level replacement decision without relying on family-level descriptions alone.
Bộ thay thế dễ dàng lắp đặt cho MAX3388ECUG+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3388ECUG+T (cùng hình factor và footprint) — khác nhau ở Driver Count, ESD Protection, Receiver Count.
MAX3388EEUG+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3389EEUG+T
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MAX3388ECUG+T Thông số kỹ thuật
| Product Type | RS-232 transceiver |
| Điện áp cung cấp | 2.5 V |
| Tốc độ dữ liệu | 460 kbps |
| Driver Count | 3 drivers |
| Receiver Count | 2 receivers |
| Duplex Mode | Full duplex |
| ESD Protection | 15 kV |
| Interface Standard | EIA/TIA-232 |
| Related Interface | V.28/V.24 |
| Hộp | 24-TSSOP |
| Package Pin Count | 24 pins |
| Package Pitch | 0.65 mm |
| Kiểu lắp đặt | Surface mount |
| Factory Pack Quantity | 2500 units |
Hướng dẫn cấu hình chân MAX3388ECUG+T 0.65 mm
Cấu hình chân cho MAX3388ECUG+T (0.65 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3388ECUG+T.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3388ECUG+T phù hợp cho 6 Áp dụngs: PDA Serial Connectivity, Cellular Phone Accessory Interface, Industrial Controller Service Port, Point-of-Sale Terminal, Data Acquisition Unit, Instrumentation and Test Equipment.
PDA Serial Connectivity
The MAX3388ECUG+T fits a personal digital assistant that needs a low-voltage RS-232 connection for synchronization, configuration, or accessory communication. Its 2.5V supply requirement aligns with compact portable systems, while the 460kbps data rate allows commands and status data to move efficiently over the UART link. The three-driver and two-receiver arrangement can support several peripheral paths when the product architecture requires them. The 15kV ESD protection is especially relevant where the connector is accessible during charging, docking, or field service. Use the manufacturer pin descriptions and application diagram to assign the connector-side signals, and keep the external RS-232 lines away from sensitive logic routes.
Được đề xuất
Cellular Phone Accessory Interface
The MAX3388ECUG+T can provide a robust RS-232 compatibility path in cellular phones and related accessory equipment operating from a low-voltage rail. Because the manufacturer identifies PDAs and cell phones as target applications, the device's 2.5V supply and enhanced 15kV ESD protection align with compact equipment exposed to electrostatic discharge. A 460kbps channel supports firmware-related commands, diagnostic information, and accessory-control traffic without requiring a higher-voltage RS-232 source. Board designers should use a compliant connector and level-shift network, maintain a short return-path arrangement, and verify the enabled-driver and receiver states against the intended power-consumption profile.
Được đề xuất
Industrial Controller Service Port
The MAX3388ECUG+T is suitable for an industrial controller that exposes a service or configuration port using RS-232. Its 460kbps data rate supports command downloads, diagnostic messages, and periodic status exchanges, while three drivers and two receivers provide flexibility for a multi-drop service architecture. The 15kV ESD protection helps the interface withstand electrostatic discharge encountered around equipment installation and maintenance. The 2.5V operating supply simplifies integration with a modern embedded control rail, but it does not replace the external bipolar RS-232 signal interface. Follow the manufacturer application circuit for connector-side components and define cable length and grounding for the installation environment.
Được đề xuất
Point-of-Sale Terminal
The MAX3388ECUG+T can serve a point-of-sale terminal or peripheral controller that needs a compact RS-232 communications link. The interface supports a maximum 460kbps data rate, which is useful for transaction-related commands, receipt data, device status, and configuration exchanges. A 2.5V supply reduces the need for a separate conventional RS-232 supply rail in compact systems, while the 15kV ESD rating adds protection for connector-accessible equipment. The three transmitter and two receiver channels allow the host to address several accessories when that topology is electrically appropriate. Validate the external driver network, connector pin definition, and UART baud-rate tolerance in the complete peripheral arrangement.
Được đề xuất
Data Acquisition Unit
The MAX3388ECUG+T fits a data-acquisition unit that accepts configuration commands and reports measurements through an RS-232 management channel. The 460kbps maximum data rate supports responsive control and status traffic, and the 2.5V operating supply can simplify integration with low-voltage embedded electronics. Two receivers are available for inbound channels, while three drivers can support separate outbound commands or responses. The 15kV ESD protection improves robustness when the serial port connects to external instrumentation or a long cable route. Designers should isolate the communications connector as needed, observe the manufacturer's external-component recommendations, and ensure that the selected UART and cable arrangement preserve signal integrity at the operating data rate.
Được đề xuất
Instrumentation and Test Equipment
The MAX3388ECUG+T can support the control and response port of portable or bench instrumentation where RS-232 remains a practical interface. Its low 2.5V supply requirement suits compact mixed-signal systems, and the 460kbps capability allows commands and measurement-status information to pass efficiently over a short serial link. The three-driver and two-receiver structure provides more channels than a basic one-driver, one-receiver RS-232 implementation, enabling a more flexible instrument topology. The enhanced 15kV ESD protection is valuable for frequently connected test leads and service ports. Validate the complete connector circuit against the manufacturer application diagram and account for ground offsets between separately powered instruments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3388ECUG+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3388EEUG+T | MAX3389EEUG+T |
|---|---|---|---|
| Package | 24-TSSOP | 24-TSSOP | 24-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage | 2.5 V | 2.5 V | 2.5 V |
| Data Rate | 460 kbps | 460 kbps | 460 kbps |
| Driver Count | 3 drivers | 3 drivers | 3 drivers |
| Receiver Count | 2 receivers | 2 receivers | 2 receivers |
| ESD Protection | 15 kV | 15 kV | 15 kV |
| Interface Standard | EIA/TIA-232, V.28/V.24 | EIA/TIA-232, V.28/V.24 | EIA/TIA-232, V.28/V.24 |
| Duplex Mode | Full duplex | Full duplex | Full duplex |
Bảo phân biệt quan trọng
- Direct 2.5V interface operation (vsMAX3388EEUG+T)
- Identical channel configuration and data rate (vsMAX3389EEUG+T)
- Package reuse for PCB replacement (vsMAX3388EEUG+T)
- Connector-accessible ESD resilience (vsMAX3389EEUG+T)
Ghi chú thiết kế
Route the connector-side RS-232 driver and receiver traces as a compact group and keep them separate from sensitive clock, sensor, and analog inputs. Maintain a low-impedance ground reference beneath the interface area and follow the manufacturer's application diagram for the external driver and receiver components. Because the MAX3388ECUG+T uses a 24-TSSOP footprint with 0.65mm pitch, verify pad alignment, courtyard clearance, and solder-paste volume on the PCB before releasing the layout.
Do not treat the 2.5V IC supply as an RS-232 connector-level voltage. The interface requires the external transmitter and receiver network specified by the manufacturer to generate and detect compliant bipolar RS-232 signals. Also verify the exact numbered pin assignments and ordering suffix before schematic capture. The MAX3388EEUG+T shares the main package and data-rate characteristics, but temperature, qualification, or functional differences must be checked before substitution.
Place the supply bypass capacitor immediately adjacent to the device's supply and ground connections, with the shortest possible return path. RS-232 driver transitions can create fast edge currents, so avoid routing the connector traces over split ground planes and keep external interface components close to the transceiver. Confirm the transceiver's enabled-channel state and the host UART configuration so idle levels and data transitions do not create unnecessary emissions or unwanted line activity.
Validate the entire communications path at 460kbps rather than checking only the nominal UART baud rate. Cable length, capacitance, grounding, driver loading, and the connected receiver can all affect reliable operation. The MAX3388ECUG+T's 15kV ESD rating improves interface robustness but does not eliminate need for connector design, cable management, and system grounding. Review unused driver and receiver pins using the manufacturer's stated input and enable states.
Thông tin tuân thủ
The component is an RS-232 communications interface IC, not an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.