Maxim Integrated

MAX395CNG+ 8-Channel SPST Analog Switch | Maxim Integrated

Teilenummer: MAX395CNG+ ✓ Aktiv
2.7 V to 16 V Vdss 100 ohm Rds(on) 24-pin PDIP Package Rising edge Speed
MOQ: 1 |

MAX395CNG+ Übersicht

Analog Devices MAX395CNG+ is an 8-channel, serially controlled SPST analog switch with 100 ohm on-resistance, a 2.7 V to 16 V supply range, and a 24-pin PDIP package. It combines eight independently controlled switches with a serial shift register for compact signal-routing designs.

An analog switch is an electronic semiconductor device that connects or disects analog signal paths under digital control. Within the product hierarchy, the MAX395CNG+ is an analog switch IC, also described as a multiplexer or switch array. Its eight SPST channels can route low-voltage signals in test equipment, instrumentation, control systems, data acquisition, and embedded measurement products without requiring eight separate mechanical or discrete switch devices.

The MAX395CNG+ uses a serial interface compatible with SPI, QSPI, and MICROWIRE protocols. Data enters at DIN and is clocked synchronously into the internal shift register on the rising edge of SCLK, allowing the eight switch states to be loaded from a host processor. The 2.7 V to 16 V operating supply supports low-voltage systems, while the cited dual-supply operating range extends from ±2.7 V to ±8 V for bipolar signal applications.

Eight separately controlled SPST switches provide 1:1 routing for each channel. The manufacturer describes the MAX395 as electrically equivalent to two MAX391 quad switches controlled by a serial interface. This architecture consolidates channel control into one package and is particularly useful when a design needs multiple analog paths to share a common serial-control structure.

Typical applications include automated test equipment, analog measurement systems, industrial control interfaces, programmable signal-routing boards, and compact data-acquisition equipment. The serial architecture is useful when the number of host GPIO pins is limited, while the 24-pin PDIP package simplifies prototyping, inspection, and through-hole assembly.

Designers should account for the control signal levels, supply sequencing, and signal amplitudes applied to each switched node. Because the MAX395 uses edge-triggered serial loading, the host must clock the intended bit pattern in the correct order and keep SCLK stable around each rising edge. The MAX395CNG+ also requires board-space allocation for a through-hole 24-pin package rather than a compact surface-mount land pattern.

This product overview combines the manufacturer's device description with practical guidance on serial control, routing architecture, package considerations, and verified drop-in alternatives. It is intended to help engineers identify whether an eight-channel serially addressed switch fits a new analog-routing design before beginning board layout.

Drop-in-Alternativen für MAX395CNG+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

MAX335CNG

✅ Drop-In
📦 24-pin PDIP
Both provide 8 SPST channels in a 24-pin PDIP footprint; the MAX395 is documented as pin compatible with the MAX335, while electrical timing and voltage details require verification

📋 Referenzalternative (nicht im Katalog)

MAX395CNG+ Grenzwerte & elektrische Eigenschaften

Number of Channels 8 channels
Switch Architecture SPST
Switch Configuration 1:1
On-Resistance 100 ohm
Single-Ended Supply Voltage Range 2.7 V to 16 V
Dual-Supply Voltage Range +/-2.7 V to +/-8 V
Anzahl der Pins 24 pins
Gehäuse 24-pin PDIP
Control Interface Serial shift register
Supported Serial Protocols SPI, QSPI, and MICROWIRE
Serial Clock Edge Rising edge
Control Data Input DIN
Serial Clock Input SCLK
Equivalent Architecture Two MAX391 quad switches with a serial interface

MAX395CNG+ 24-pin pdip Pinbelegungsleitfaden

Pinbelegung für MAX395CNG+ (24-pin pdip-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX395CNG+ im 24-pin pdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX395CNG+.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX395CNG+ ist geeignet für 6 Anwendungs: Automated Test Equipment Signal Routing, Programmable Data Acquisition, Industrial Control Signal Multiplexing, Instrumentation Signal Selection, Low-Voltage Test Point Multiplexing, Embedded Analog Routing.

🖥️

Automated Test Equipment Signal Routing

The MAX395CNG+ fits automated test systems that must route several low-voltage signals under processor control. Its eight SPST channels provide independent 1:1 paths, while the serial interface consolidates control into DIN and SCLK rather than requiring one output per channel. The 100 ohm on-resistance is suitable for many instrumentation and general-purpose signal paths. Because the device accepts SPI, QSPI, or MICROWIRE-compatible control, it can pair readily with embedded controllers. The 24-pin PDIP format is particularly convenient for prototypes, but production layouts must reserve through-hole footprint area and maintain appropriate clearance around adjacent pins.

📡

Programmable Data Acquisition

The MAX395CNG+ supports programmable data-acquisition front ends by placing eight independently selected SPST analog paths under a common serial-control mechanism. A microcontroller can clock the desired switch configuration into the internal shift register on each rising SCLK edge, reducing GPIO consumption compared with eight separately latched switches. The 2.7 V to 16 V supply range accommodates common low-voltage embedded systems. Designers should verify that the 100 ohm path resistance remains acceptable for the selected sensor, excitation, and input-impedance conditions before assigning the switch to precision measurements.

🏭

Industrial Control Signal Multiplexing

The MAX395CNG+ is useful in industrial control equipment where several low-voltage command or feedback paths must be selected according to a controller sequence. Its eight separately controlled SPST switches allow one serial interface to manage multiple analog routes, and the 2.7 V to 16 V supply range suits 3.3 V and 5 V control systems. The device can also support bipolar signal environments within the documented ±2.7 V to ±8 V range. Engineers should include isolation, fault-current, and transient considerations in the broader interface design, because those requirements are outside the basic switch-rating information.

🔧

Instrumentation Signal Selection

The MAX395CNG+ can select between multiple low-level analog sources in bench and field instrumentation. Eight 1:1 SPST paths allow the measurement chain to change configuration without using a mechanical relay, and the serial control reduces command wiring. Its 100 ohm on-resistance is a key parameter when driving sensitive inputs, so the complete signal path should be assessed for loading and settling behavior. The manufacturer identifies the device as electrically equivalent to two MAX391 quad switches with one serial interface, making the MAX395 attractive when eight individually addressed channels are required.

📺

Low-Voltage Test Point Multiplexing

The MAX395CNG+ fits compact test-point multiplexing boards that connect several measurement nodes to a common instrument or controller. The serial shift-register architecture allows channel states to be loaded sequentially, which simplifies control from a microcontroller and lowers the pin count required for switch commands. Its single-supply operation from 2.7 V to 16 V supports integration with contemporary test electronics. Layout should keep the serial control path away from sensitive analog nodes, while firmware must establish a defined clock-idle state and consistent DIN setup time before each rising edge.

🧩

Embedded Analog Routing

The MAX395CNG+ provides a compact logical solution for embedded systems that need more analog routing channels than their host processor can address directly. SPI, QSPI, and MICROWIRE compatibility lets firmware configure all eight switch positions with a short serial transaction. The 2.7 V to 16 V operating range aligns with common embedded supply levels, while the eight-channel structure replaces several separately controlled discrete switch packages. For compact production boards, verify whether the 24-pin PDIP footprint is acceptable; for prototypes and serviceable assemblies, through-hole construction simplifies replacement and inspection.

Zusammenfassung der empfohlenen Produkte

MAX335CNG Pin-compatible eight-channel analog-switch cross-reference Verwendet in: Automated Test Equipment Signal Routing, Programmable Data Acquisition, Industrial Control Signal Multiplexing, Instrumentation Signal Selection, Low-Voltage Test Point Multiplexing, Embedded Analog Routing MAX391 Quad-switch building block referenced by the MAX395 architecture Verwendet in: Automated Test Equipment Signal Routing, Programmable Data Acquisition, Industrial Control Signal Multiplexing, Instrumentation Signal Selection, Low-Voltage Test Point Multiplexing, Embedded Analog Routing
What is the MAX395CNG+ and what does it do?
The MAX395CNG+ is an 8-channel, serially controlled SPST analog switch IC that routes low-voltage analog signals through eight independently controlled switches. According to the Analog Devices MAX395 product page, it operates as a shift register and can load channel-control data through a DIN and SCLK serial interface. Each channel provides a 1:1 switching function, making the device useful for test, measurement, and programmable signal-routing systems.
What are the key specifications of MAX395CNG+ that engineers should know?
The MAX395CNG+ combines 8 SPST channels, 100 ohm on-resistance, a 2.7 V to 16 V supply range, and a 24-pin PDIP package. Its serial interface supports SPI, QSPI, and MICROWIRE, with data clocked into the shift register on the rising edge of SCLK. According to the Analog Devices MAX395 product page, the device is also electrically equivalent to two MAX391 quad switches operating under one serial interface.
Where can I download the MAX395CNG+ datasheet PDF?
The official MAX395 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/max395.html. The MAX395CNG+ manufacturer datasheet describes the serial control architecture, operating ranges, electrical characteristics, pin configuration, and application information. Use the official document for design decisions and consult the package drawings to verify connector and footprint dimensions before laying out a PCB.
Where can I find the MAX395CNG+ pinout?
The MAX395CNG+ pin configuration is documented in the official MAX395 manufacturer datasheet linked from the Analog Devices product page. The device uses a 24-pin PDIP package and exposes DIN, SCLK, supply, ground, and channel-control connections. Use the pin-description table and package drawing in that document when assigning PCB tracks because the exact signal names and no-connect positions must be copied directly from the manufacturer document.
What serial protocols does the MAX395CNG+ support?
The MAX395CNG+ supports SPI, QSPI, and MICROWIRE-compatible serial control. According to the Analog Devices MAX395 product page, the internal shift register accepts data at DIN and clocks it synchronously on the rising edge of SCLK. This allows a microcontroller to select the state of the eight switches without dedicating one general-purpose output to every channel, reducing control-pin requirements in space-constrained systems.
What is the supply voltage range of the MAX395CNG+?
The MAX395CNG+ operates from 2.7 V to 16 V in a single-supply configuration. For bipolar operation, the documented range extends from ±2.7 V to ±8 V. The manufacturer describes the MAX395 as a low-voltage analog switch, so the selected supply arrangement must satisfy both control-logic requirements and the voltage range of signals routed through the eight channels.
Can MAX395CNG+ replace two MAX391 quad switches?
The MAX395CNG+ can consolidate the function of two MAX391 quad switches because the manufacturer identifies the MAX395 as electrically equivalent to two MAX391 devices controlled by a serial interface. The key practical benefit is one shared serial-control structure for eight channels. Board-level equivalence still requires checking signal levels, supply arrangement, control timing, and the physical footprint before replacing two separate packages.
What is the best drop-in replacement for MAX395CNG+?
The MAX335CNG is the strongest documented drop-in candidate because the Analog Devices MAX395 product page states that the MAX395 is pin compatible with the MAX335. The replacement still requires verification of supply range, on-resistance, control logic, and electrical timing. No additional pin-compatible candidates were confirmed in the cited cross-reference information, so the XAIPART Request a Quote form should be used to check current sourcing for the exact MPN.
What can replace MAX395CNG+?
MAX335CNG is the documented pin-compatible replacement candidate for MAX395CNG+, while MAX391 is a related functional building block that can be paired to provide eight channels. A valid substitution must preserve the 24-pin footprint, serial-control behavior, signal-level limits, and operating supply range. The MAX395EAG-T is not a drop-in option because it uses a 24-pin SSOP package rather than the MAX395CNG+ PDIP package.
Is MAX335CNG pin compatible with MAX395CNG+?
Yes, Analog Devices states that the MAX395 is pin compatible with the MAX335, making MAX335CNG the identified cross-reference for MAX395CNG+. Pin compatibility establishes the primary footprint relationship, but a production replacement should still be reviewed for on-resistance, supply range, switching behavior, timing, and application-level signal constraints. The cited comparison identifies both as eight-channel SPST devices in 24-pin packages.
When should I choose MAX395CNG+ over MAX335CNG?
Choose MAX395CNG+ when the design specifically requires the MAX395 function or when its documented electrical characteristics fit the signal path more closely. Choose MAX335CNG only after confirming that its electrical specifications satisfy every operating condition of the original design. The MAX395 is described as pin compatible with the MAX335, but pin compatibility alone does not guarantee identical on-resistance, voltage limits, or timing performance.
Is MAX395CNG+ suitable for automated test equipment?
The MAX395CNG+ is suitable for automated test equipment that requires eight independently controlled low-voltage analog paths. Its eight SPST channels, 100 ohm on-resistance, and serial SPI, QSPI, or MICROWIRE-compatible control reduce the number of discrete connections required from the controller. The main design constraint is that the 24-pin PDIP package occupies more board area than a surface-mount switching IC.
Where can I buy MAX395CNG+ and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for MAX395CNG+. Quote-based requests keep commercial details synchronized with current inventory and avoid presenting a stale figure. Confirm that the quoted suffix is MAX395CNG+, because alternate package suffixes such as MAX395EAG-T do not share the same 24-pin PDIP footprint.
How long is the lead time for MAX395CNG+?
Current lead time for MAX395CNG+ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package suffix, inventory position, and manufacturing continuity, so a quantity-specific quotation is more useful than a generic availability statement. When requesting a quote, specify the required quantity, target delivery date, and whether partial shipment is acceptable.
Is MAX395CNG+ in stock?
Current stock for MAX395CNG+ should be checked through the Request a Quote form on this page. Submit the required quantity and intended shipping destination so the response reflects the exact order configuration. Do not infer live inventory from a general catalog page, and verify that the returned manufacturer part number includes the MAX395CNG+ suffix rather than a surface-mount or tape-and-reel variant.
What is the MAX395CNG+ versus MAX335CNG difference?
MAX395CNG+ and MAX335CNG are both eight-channel SPST devices in 24-pin packages, and Analog Devices states that the MAX395 is pin compatible with the MAX335. The documented architectural distinction is that MAX395 is electrically equivalent to two MAX391 quad switches operating under a serial interface. Exact performance differences should be checked in the manufacturer data for each part before approving a replacement.

Technische Referenzdaten für MAX395CNG+ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX395CNG+ when the design requires eight separately controlled low-voltage SPST paths, a compact serial command interface, and a through-hole 24-pin PDIP package. Its 2.7 V to 16 V supply range, 100 ohm on-resistance, and support for SPI, QSPI, and MICROWIRE make it appropriate for programmable test, instrumentation, acquisition, and industrial routing systems. Consider MAX335CNG when its manufacturer data provides a closer match for the operating conditions; Analog Devices explicitly states that MAX395 is pin compatible with MAX335, but on-resistance, voltage limits, and timing should still be compared before substitution. MAX391 is useful as a related quad-switch building block when two devices are acceptable. The MAX395EAG-T is not a drop-in replacement because it uses a 24-pin SSOP package. For compact surface-mount products, the PDIP footprint may require a different design approach rather than direct substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX335CNG
Brand Maxim Integrated Maxim Integrated
Package 24-pin PDIP 24-pin PDIP
Number of Channels 8 channels 8 channels
Switch Architecture 8 SPST switches 8 SPST switches
Pin Compatibility Pin compatible with MAX335 MAX395 is documented as pin compatible with MAX335

Wichtigste Unterscheidungsmerkmale

  • Eight independently controlled analog channels in one package (vs. MAX335CNG)
  • Consolidated serial control architecture (vs. MAX335CNG)
  • Compatibility with multiple serial protocols (vs. MAX335CNG)

Designhinweise

Treat SCLK edge timing and DIN setup time as a critical firmware and layout constraint. The MAX395 loads serial data into its shift register on the rising edge of SCLK. Keep the clock trace away from sensitive analog routing, define a stable idle level, and avoid changing DIN near a valid rising edge. A small change in bit order can silently produce incorrect channel states even when the serial transaction appears electrically valid.

Evaluate the complete switched signal path against the 100 ohm on-resistance specification. Long PCB traces, connector contacts, and downstream input impedance can add loading that is significant compared with the switch resistance. Use short analog routes, clean return paths, and solid grounding around the PDIP footprint. For high-frequency or precision measurements, verify settling time, off-isolation, and channel-to-channel isolation in the manufacturer electrical tables before finalizing the architecture.

Reserve the complete 24-pin PDIP footprint and through-hole clearances on the board. Keep the serial control pins away from analog switch nodes where possible, and route supply and ground conductors with low loop impedance. The through-hole package is straightforward for prototyping and field replacement, but it occupies more board area than a comparable surface-mount switch. Confirm the actual pin numbering from the manufacturer package drawing before generating PCB artwork.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The listed device is identified as non-automotive. Specific environmental and material-compliance declarations were not present in the cited product information.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX395CNG+ datasheet MAX395CNG+ datasheet pdf MAX395CNG+ pinout MAX395CNG+ specifications MAX395CNG+ equivalent MAX395CNG+ replacement MAX395CNG+ cross reference MAX395CNG+ price MAX395CNG+ stock Maxim Integrated MAX395CNG+ MAX395CNG+ 8 channel SPST switch MAX395CNG+ 24 pin PDIP MAX395CNG+ analog switch application MAX395CNG+ vs MAX335CNG

Verwandte Bauteile & Begriffe

Maxim Integrated Analog Devices MAX395CNG+ MAX395 MAX335CNG MAX391 analog switch analog switch IC multiplexer SPST serial switch array SPI QSPI MICROWIRE shift register on-resistance supply voltage bipolar signal 24-pin PDIP through-hole package automated test equipment data acquisition industrial control instrumentation embedded analog routing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen