MAX395CNG+ 8-Channel SPST Analog Switch | Maxim Integrated
Артикул: MAX395CNG+ ✓ АктивенMAX395CNG+ Обзор
An analog switch is an electronic semiconductor device that connects or disects analog signal paths under digital control. Within the product hierarchy, the MAX395CNG+ is an analog switch IC, also described as a multiplexer or switch array. Its eight SPST channels can route low-voltage signals in test equipment, instrumentation, control systems, data acquisition, and embedded measurement products without requiring eight separate mechanical or discrete switch devices.
The MAX395CNG+ uses a serial interface compatible with SPI, QSPI, and MICROWIRE protocols. Data enters at DIN and is clocked synchronously into the internal shift register on the rising edge of SCLK, allowing the eight switch states to be loaded from a host processor. The 2.7 V to 16 V operating supply supports low-voltage systems, while the cited dual-supply operating range extends from ±2.7 V to ±8 V for bipolar signal applications.
Eight separately controlled SPST switches provide 1:1 routing for each channel. The manufacturer describes the MAX395 as electrically equivalent to two MAX391 quad switches controlled by a serial interface. This architecture consolidates channel control into one package and is particularly useful when a design needs multiple analog paths to share a common serial-control structure.
Typical applications include automated test equipment, analog measurement systems, industrial control interfaces, programmable signal-routing boards, and compact data-acquisition equipment. The serial architecture is useful when the number of host GPIO pins is limited, while the 24-pin PDIP package simplifies prototyping, inspection, and through-hole assembly.
Designers should account for the control signal levels, supply sequencing, and signal amplitudes applied to each switched node. Because the MAX395 uses edge-triggered serial loading, the host must clock the intended bit pattern in the correct order and keep SCLK stable around each rising edge. The MAX395CNG+ also requires board-space allocation for a through-hole 24-pin package rather than a compact surface-mount land pattern.
This product overview combines the manufacturer's device description with practical guidance on serial control, routing architecture, package considerations, and verified drop-in alternatives. It is intended to help engineers identify whether an eight-channel serially addressed switch fits a new analog-routing design before beginning board layout.
Аналоги без доработки для MAX395CNG+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
MAX335CNG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX395CNG+ Максимальные параметры и электрические характеристики
| Number of Channels | 8 channels |
| Switch Architecture | SPST |
| Switch Configuration | 1:1 |
| On-Resistance | 100 ohm |
| Single-Ended Supply Voltage Range | 2.7 V to 16 V |
| Dual-Supply Voltage Range | +/-2.7 V to +/-8 V |
| Количество выводов | 24 pins |
| Корпус | 24-pin PDIP |
| Control Interface | Serial shift register |
| Supported Serial Protocols | SPI, QSPI, and MICROWIRE |
| Serial Clock Edge | Rising edge |
| Control Data Input | DIN |
| Serial Clock Input | SCLK |
| Equivalent Architecture | Two MAX391 quad switches with a serial interface |
Руководство по цоколевке MAX395CNG+ в корпусе 24-pin pdip
Цоколевка для MAX395CNG+ (корпус 24-pin pdip). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для MAX395CNG+.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MAX395CNG+ подходит для 6 применениеs: Automated Test Equipment Signal Routing, Programmable Data Acquisition, Industrial Control Signal Multiplexing, Instrumentation Signal Selection, Low-Voltage Test Point Multiplexing, Embedded Analog Routing.
Automated Test Equipment Signal Routing
The MAX395CNG+ fits automated test systems that must route several low-voltage signals under processor control. Its eight SPST channels provide independent 1:1 paths, while the serial interface consolidates control into DIN and SCLK rather than requiring one output per channel. The 100 ohm on-resistance is suitable for many instrumentation and general-purpose signal paths. Because the device accepts SPI, QSPI, or MICROWIRE-compatible control, it can pair readily with embedded controllers. The 24-pin PDIP format is particularly convenient for prototypes, but production layouts must reserve through-hole footprint area and maintain appropriate clearance around adjacent pins.
Рекомендуется
Programmable Data Acquisition
The MAX395CNG+ supports programmable data-acquisition front ends by placing eight independently selected SPST analog paths under a common serial-control mechanism. A microcontroller can clock the desired switch configuration into the internal shift register on each rising SCLK edge, reducing GPIO consumption compared with eight separately latched switches. The 2.7 V to 16 V supply range accommodates common low-voltage embedded systems. Designers should verify that the 100 ohm path resistance remains acceptable for the selected sensor, excitation, and input-impedance conditions before assigning the switch to precision measurements.
Рекомендуется
Industrial Control Signal Multiplexing
The MAX395CNG+ is useful in industrial control equipment where several low-voltage command or feedback paths must be selected according to a controller sequence. Its eight separately controlled SPST switches allow one serial interface to manage multiple analog routes, and the 2.7 V to 16 V supply range suits 3.3 V and 5 V control systems. The device can also support bipolar signal environments within the documented ±2.7 V to ±8 V range. Engineers should include isolation, fault-current, and transient considerations in the broader interface design, because those requirements are outside the basic switch-rating information.
Рекомендуется
Instrumentation Signal Selection
The MAX395CNG+ can select between multiple low-level analog sources in bench and field instrumentation. Eight 1:1 SPST paths allow the measurement chain to change configuration without using a mechanical relay, and the serial control reduces command wiring. Its 100 ohm on-resistance is a key parameter when driving sensitive inputs, so the complete signal path should be assessed for loading and settling behavior. The manufacturer identifies the device as electrically equivalent to two MAX391 quad switches with one serial interface, making the MAX395 attractive when eight individually addressed channels are required.
Рекомендуется
Low-Voltage Test Point Multiplexing
The MAX395CNG+ fits compact test-point multiplexing boards that connect several measurement nodes to a common instrument or controller. The serial shift-register architecture allows channel states to be loaded sequentially, which simplifies control from a microcontroller and lowers the pin count required for switch commands. Its single-supply operation from 2.7 V to 16 V supports integration with contemporary test electronics. Layout should keep the serial control path away from sensitive analog nodes, while firmware must establish a defined clock-idle state and consistent DIN setup time before each rising edge.
Рекомендуется
Embedded Analog Routing
The MAX395CNG+ provides a compact logical solution for embedded systems that need more analog routing channels than their host processor can address directly. SPI, QSPI, and MICROWIRE compatibility lets firmware configure all eight switch positions with a short serial transaction. The 2.7 V to 16 V operating range aligns with common embedded supply levels, while the eight-channel structure replaces several separately controlled discrete switch packages. For compact production boards, verify whether the 24-pin PDIP footprint is acceptable; for prototypes and serviceable assemblies, through-hole construction simplifies replacement and inspection.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX395CNG+ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MAX335CNG |
|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated |
| Package | 24-pin PDIP | 24-pin PDIP |
| Number of Channels | 8 channels | 8 channels |
| Switch Architecture | 8 SPST switches | 8 SPST switches |
| Pin Compatibility | Pin compatible with MAX335 | MAX395 is documented as pin compatible with MAX335 |
Ключевые отличия
- Eight independently controlled analog channels in one package (против MAX335CNG)
- Consolidated serial control architecture (против MAX335CNG)
- Compatibility with multiple serial protocols (против MAX335CNG)
Заметки по проектированию
Treat SCLK edge timing and DIN setup time as a critical firmware and layout constraint. The MAX395 loads serial data into its shift register on the rising edge of SCLK. Keep the clock trace away from sensitive analog routing, define a stable idle level, and avoid changing DIN near a valid rising edge. A small change in bit order can silently produce incorrect channel states even when the serial transaction appears electrically valid.
Evaluate the complete switched signal path against the 100 ohm on-resistance specification. Long PCB traces, connector contacts, and downstream input impedance can add loading that is significant compared with the switch resistance. Use short analog routes, clean return paths, and solid grounding around the PDIP footprint. For high-frequency or precision measurements, verify settling time, off-isolation, and channel-to-channel isolation in the manufacturer electrical tables before finalizing the architecture.
Reserve the complete 24-pin PDIP footprint and through-hole clearances on the board. Keep the serial control pins away from analog switch nodes where possible, and route supply and ground conductors with low loop impedance. The through-hole package is straightforward for prototyping and field replacement, but it occupies more board area than a comparable surface-mount switch. Confirm the actual pin numbering from the manufacturer package drawing before generating PCB artwork.
Информация о соответствии
The listed device is identified as non-automotive. Specific environmental and material-compliance declarations were not present in the cited product information.