Analog Devices

MAX4854HETE+T - 9 Ohm Quad SPST Signal Switch | Analog Devices

Teilenummer: MAX4854HETE+T ✓ Aktiv
9 ohm Rds(on) TQFN-16 (HVQCCN), 3 x 3 mm Package
MOQ: 1 |

MAX4854HETE+T Übersicht

The Analog Devices MAX4854HETE+T is a quad SPST analog switch IC with a 1:1 switch topology, 9 ohm on-resistance, and four independently controlled circuits in a 16-pin TQFN surface-mount package. It is designed for high-bandwidth signal-line routing and signal-line protection applications.

An analog switch is an integrated circuit that connects or disconnects signal paths under digital control. The SPST designation means each internal switch provides one normally closed or selectable single-pole, single-throw path. As part of the interface IC hierarchy, the MAX4854HETE+T provides controlled routing between external circuitry and a protected signal path. Its quad-channel architecture integrates four switching circuits into one compact package.

The device offers a 9 ohm on-resistance, a 1:1 configuration, and four SPST circuits. These characteristics are useful where a design needs several selectable signal paths rather than a single high-current power switch. The manufacturer datasheet identifies the part as a high-bandwidth, signal-line protection switch. Its surface-mount TQFN package also supports compact PCB layouts where analog routing and protection must be integrated close to the controlled signal source.

The MAX4854HETE+T uses four control inputs to operate its four SPST channels. Control-signal timing, output capacitance, bandwidth, logic thresholds, and switch leakage determine how cleanly the device can pass short analog signals. Because these operating characteristics depend on the system’s signal amplitude, source impedance, load, and layout, designers should use the manufacturer datasheet limits when checking the complete signal path and logic compatibility.

Typical uses include protected analog signal routing, test and measurement interfaces, communications equipment, data-acquisition systems, and industrial control boards. The quad-channel organization is particularly useful when several external nodes must be isolated, routed, or protected through common control logic. It can reduce component count compared with four discrete single-channel switches while keeping routing in a compact package.

For reliable implementation, place the device close to the protected signal path and route high-speed or high-current connections with short traces and a continuous ground reference. Confirm logic levels and control timing before enabling the switches. Also account for off isolation, on capacitance, and leakage when the signal amplitude is small or the application requires low crosstalk.

This page combines the device’s circuit configuration, package information, sourcing fields, and engineering guidance with practical design considerations. It also identifies the limited drop-in options found for this footprint so that board designers can distinguish a confirmed replacement from merely similar switching devices.

Drop-in-Alternativen für MAX4854HETE+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX4854HETE+T (gleiche Bauform und Footprint) – abweichend in Package, Switch Type.

Analog Devices
Package: 16-pin TQFN with exposed pad, 3 mm × 3 mm
Switch Type: SPST
Vergleichen mit MAX4854HETE+T →

MAX4854HETE+

✅ Drop-In
Analog Devices
📦 TQFN-16 (HVQCCN) 3x3 mm
4 circuits · 1:1 · SPST · 9 ohm · 150 MHz · 27.5 pF · 2 V to 5.5 V · -40°C to +85°C

Preis auf Anfrage

Datenblatt ansehen →

MAX4854HETE+T Grenzwerte & elektrische Eigenschaften

Number of Circuits 4 circuits
Switch Configuration 1:1
On-Resistance 9 ohm
Switch Type Quad SPST
Signal-Line Function High-bandwidth signal-line protection switching
Number of Terminals 16 terminals
Gehäuse TQFN-16 (HVQCCN), 3 x 3 mm
Package Shape Square
Montageart Surface mount
Temperature Grade Industrial

MAX4854HETE+T square Pinbelegungsleitfaden

Pinbelegung für MAX4854HETE+T (square-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX4854HETE+T im square-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX4854HETE+T.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX4854HETE+T ist geeignet für 6 Anwendungs: Protected Analog Signal Routing, Test and Measurement Interfaces, Data-Acquisition Systems, Communications Equipment, Industrial Control Systems, Audio Signal Selection.

🔧

Protected Analog Signal Routing

The MAX4854HETE+T fits protected analog routing because it combines four SPST channels, a 1:1 configuration, and a 9 ohm on-resistance in one 3 x 3 mm TQFN package. Each channel can provide a controlled connection between a signal source and its destination while the other paths remain separately controlled. The integration reduces the number of discrete switch packages on a multi-node analog board. Designers should verify that 9 ohm is acceptable for the source impedance and signal amplitude, and should compare the datasheet on-capacitance and leakage values with the bandwidth budget before finalizing the layout.

📺

Test and Measurement Interfaces

The MAX4854HETE+T is suitable for test and measurement interfaces where several low-level analog paths must be routed under instrument control. Its four SPST channels and 9 ohm on-resistance can connect sources, attenuators, filters, or external test points while keeping the routing network compact. The manufacturer describes the part as a high-bandwidth signal-line protection switch, supporting its use in protected measurement paths. Before selecting it for precision instrumentation, compare input capacitance, leakage, off isolation, and logic thresholds with the instrument’s source impedance and required measurement bandwidth.

🖥️

Data-Acquisition Systems

The MAX4854HETE+T can route four channels in a compact data-acquisition front end where sensor or source selection must be under software or hardware control. Its 1:1 SPST organization avoids an alternate signal path, while the 9 ohm on-resistance establishes the insertion impedance that the source and acquisition circuitry must tolerate. The 16-terminal TQFN package helps keep routing close to sensitive analog nodes and away from long unprotected traces. Use the manufacturer’s control timing, capacitance, leakage, and operating-voltage limits to confirm compatibility with the ADC driver and acquisition sequencer.

🌐

Communications Equipment

The MAX4854HETE+T fits communications equipment requiring compact, controlled routing of multiple protected lines. Its four SPST channels can manage auxiliary or lower-bandwidth signal paths where the source impedance permits a 9 ohm switch resistance and the required bandwidth remains inside the manufacturer’s operating limits. Keeping the device near the connector or protected line can reduce exposure of sensitive nodes and shorten PCB routing. Logic thresholds, supply requirements, switch capacitance, and off-isolation characteristics should be checked against the communications controller and connector environment before release to production.

🏭

Industrial Control Systems

The MAX4854HETE+T can support signal routing in industrial control systems where multiple external lines require controlled isolation from an analog or controller section. The quad SPST architecture consolidates four switching paths in a compact 3 x 3 mm surface-mount footprint, while the signal-line protection function helps place switching close to exposed circuitry. Engineers should account for the industrial temperature grade, logic thresholds, leakage, and off isolation when defining system behavior. PCB layout should keep the control traces away from sensitive analog paths and provide a low-impedance ground connection to the exposed pad.

🎧

Audio Signal Selection

The MAX4854HETE+T is appropriate for audio signal selection when four SPST paths must be routed with a compact, high-bandwidth-oriented switch. The 9 ohm on-resistance may be acceptable for many line-level paths, but it can create a divider with the source impedance and load, affecting level and damping. Because the manufacturer positions the device as a high-bandwidth signal-line protection switch, it can sit near a protected input and shorten sensitive traces. Verify the actual bandwidth, off isolation, capacitance, and logic levels against the audio source, amplifier input, and system grounding arrangement.

What is the MAX4854HETE+T?
The MAX4854HETE+T is a quad SPST analog switch with a 1:1 configuration, 9 ohm on-resistance, and four independently controlled circuits. According to the Maxim manufacturer datasheet, it is a high-bandwidth signal-line protection switch in a 16-terminal TQFN package measuring 3 x 3 mm.
What package does the MAX4854HETE+T use?
The MAX4854HETE+T uses a 16-terminal TQFN surface-mount package with a 3 x 3 mm body and an exposed-pad package code identified as HVQCCN. The exposed pad provides the package's electrical ground and thermal connection when the manufacturer land pattern is followed on the PCB.
How many SPST switches are integrated in the MAX4854HETE+T?
The MAX4854HETE+T integrates four SPST switches in one package. Each circuit uses a 1:1 configuration, and the manufacturer identifies the device with a 9 ohm on-resistance. The four-channel arrangement is useful for routing or protecting multiple signals with common board-level control.
Is the MAX4854HETE+T a drop-in replacement for MAX4854HETE+?
The MAX4854HETE+T can be a drop-in match for MAX4854HETE+ when the board uses the same 16-terminal TQFN land pattern and the required electrical characteristics are unchanged. The two listings describe the same 4-circuit SPST, 1:1, 9 ohm device, but procurement should confirm the supplier's suffix, packing, temperature grade, and marking requirements.
What can replace the MAX4854HETE+T?
MAX4854HETE+ is the closest confirmed replacement because it retains the same four-circuit SPST architecture, 1:1 topology, 9 ohm on-resistance, and 16-terminal TQFN package. No other cross-brand part was confirmed as both pin-to-pin and parametrically equivalent, so a different switch family should not be treated as a drop-in option.
MAX4854HETE+T vs MAX4854HETE+ - which one should I select?
Select the MAX4854HETE+T when the required ordering code specifically uses the +T suffix and the manufacturer marking, packing, and thermal-layout requirements match the assembled board. Select MAX4854HETE+ only after confirming that its suffix, package details, and manufacturer documentation preserve the required electrical and environmental characteristics.
When should I choose the MAX4854HETE+T over a single-channel analog switch?
Choose the MAX4854HETE+T when the board must route or protect four related signals and its 9 ohm on-resistance is acceptable for the signal path. A single-channel switch may be preferable when only one path is required, the source impedance is very low, or the application needs a substantially lower on-resistance.
Is the MAX4854HETE+T suitable for protected analog signal routing?
Yes, the MAX4854HETE+T is suitable for protected analog signal routing when its 9 ohm on-resistance and switching characteristics meet the signal-chain requirements. The manufacturer describes it as a high-bandwidth signal-line protection switch, making it appropriate for controlled routing in instrumentation and communication equipment.
Where can I download the MAX4854HETE+T datasheet PDF?
The MAX4854HETE+T datasheet is available from the Maxim datasheet entry linked on this page and through the listed manufacturer-data resources. Use the manufacturer's pin-configuration table, electrical-characteristics table, and TQFN land-pattern information when assigning PCB pads and checking control levels.
Where can I find the MAX4854HETE+T pinout?
The MAX4854HETE+T pinout is defined by the 16-terminal TQFN drawing and pin-description table in the Maxim manufacturer datasheet. Use that table to map each switch terminal and control input to the PCB because the exposed pad is not an additional numbered terminal.
What are the key specifications engineers should know about MAX4854HETE+T?
The key MAX4854HETE+T specifications are four SPST channels, a 1:1 switch configuration, 9 ohm on-resistance, and a 16-terminal 3 x 3 mm TQFN package. The device is categorized as a high-bandwidth signal-line protection switch and uses an industrial temperature grade. Check voltage, bandwidth, leakage, capacitance, and control-threshold limits in the manufacturer datasheet.
Where can I buy MAX4854HETE+T online?
Use the Request a Quote form on this page to ask for MAX4854HETE+T availability, unit pricing, minimum order quantity, and lead time. The form keeps the request tied to the exact MAX4854HETE+T ordering code and the manufacturer product identity shown on this page.
What is the price of MAX4854HETE+T?
Submit the MAX4854HETE+T part number through the Request a Quote form on this page for a current quotation. The quote can reflect quantity, delivery schedule, sourcing condition, and the exact package suffix needed for your assembly rather than presenting a potentially stale list price.
What is the lead time for MAX4854HETE+T?
Request the current lead time for MAX4854HETE+T through the Request a Quote form on this page. The response should state the quantity, shipment destination, required package suffix, and whether the order is being placed against existing production demand or new production.
Is MAX4854HETE+T in stock?
Request current MAX4854HETE+T inventory status through the Request a Quote form on this page. The form supports an order inquiry for the exact ordering code and provides the clearest answer for availability, allocation, and expected fulfillment timing.

Technische Referenzdaten für MAX4854HETE+T – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX4854HETE+T when the exact +T ordering code, marking, packing, and thermal implementation match your assembly. Its four SPST channels, 1:1 configuration, and 9 ohm on-resistance make it suitable for compact routing or protection of multiple analog signals. MAX4854HETE+ is the closest confirmed drop-in candidate because it retains the same circuit count, topology, on-resistance, and 16-terminal TQFN package, but confirm the suffix-specific requirements before substitution. No cross-brand alternative was confirmed as pin-to-pin and parametrically equivalent, so do not substitute based only on package size, switch count, or bandwidth descriptions. For applications with very low source impedance, very high insertion-loss limits, or exact logic-threshold and isolation requirements, compare the manufacturer electrical limits and consider a purpose-built lower-resistance or higher-isolation device instead.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX4854HETE+
Package TQFN-16 (HVQCCN) 3x3 mm TQFN-16 (HVQCCN) 3x3 mm
Brand Analog Devices Analog Devices
Number of Circuits 4 circuits 4 circuits
Switch Configuration 1:1 1:1
On-Resistance 9 ohm 9 ohm
Switch Type Quad SPST Quad SPST
Number of Terminals 16 terminals 16 terminals
Signal-Line Function High-bandwidth signal-line protection switching High-bandwidth signal-line protection switching

Wichtigste Unterscheidungsmerkmale

  • Four SPST channels integrated into one compact package (vs. MAX4854HETE+)
  • Direct 1:1 signal configuration (vs. MAX4854HETE+)
  • Matching 9 ohm on-resistance (vs. MAX4854HETE+)

Designhinweise

Follow the manufacturer's TQFN land pattern exactly, including the exposed-pad dimensions and solder-mask guidance. Place the device close to the protected signal node so that switching occurs before the trace reaches sensitive circuitry. Keep the exposed pad connected to the board ground plane with a short thermal path and avoid placing a keepout that isolates the pad from ground copper.

Evaluate the complete source impedance, 9 ohm on-resistance, switch capacitance, and destination input impedance as one divider. For low-amplitude or high-impedance nodes, even a modest resistance can reduce signal level, while capacitance can increase rise and fall times. Use short traces, a continuous reference plane, and ground returns adjacent to each protected line.

Do not treat a switch with the same TQFN outline as a drop-in replacement without comparing its terminal assignment and electrical limits. Likewise, do not substitute MAX4899AEETE+T solely because it is a related Maxim interface device; its pin functions and electrical characteristics must be verified independently. Validate logic thresholds, control polarity, supply range, and switch state before production release.

Route the four control inputs away from the analog switch nodes and provide a low-impedance ground reference near the package. If control signals originate on a different board region, use a ground-referenced buffer or properly terminated driver rather than allowing long floating traces. This reduces switching transients coupled into the protected signal paths.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The device is an industrial-temperature interface IC; automotive qualification is not indicated. Compliance status is not stated in the listed product records.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX4854HETE+T datasheet MAX4854HETE+T pinout MAX4854HETE+T datasheet pdf MAX4854HETE+T specifications MAX4854HETE+T TQFN-16 package MAX4854HETE+T 9 ohm on resistance MAX4854HETE+T equivalent MAX4854HETE+T replacement MAX4854HETE+T vs MAX4854HETE+ MAX4854HETE+T price MAX4854HETE+T stock Analog Devices MAX4854HETE+T MAX4854HETE+T signal line protection MAX4854HETE+T analog switch

Verwandte Bauteile & Begriffe

Analog Devices Maxim Integrated MAX4854HETE+T MAX4854HETE+ MAX4899AEETE+T analog switch interface IC SPST switch quad SPST signal-line protection switch on-resistance 9 ohm on-resistance 1:1 switch configuration high-bandwidth switching TQFN-16 HVQCCN package QFN family surface-mount package analog signal routing data-acquisition systems industrial control systems test and measurement audio signal selection protected signal paths
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen