onsemi

MC14018BF - 5-Stage Presettable Counter | onsemi

Teilenummer: MC14018BF ✓ Aktiv
16-pin plastic DIP Package Positive-going edge Speed
MOQ: 1 |

MC14018BF Übersicht

onsemi MC14018BF is a five-stage Johnson-type, presettable divide-by-N counter with asynchronous preset and reset control, packaged in a 16-pin plastic DIP. The device increments synchronously on the positive-going edge of the clock and provides five decoded decade outputs for applications requiring frequency division, sequencing, or ring-counter operation.

A Johnson counter is a synchronous sequential-logic circuit whose output stages feed the next stage in a ring configuration. It belongs to the counter and divider hierarchy within CMOS logic ICs. Unlike a conventional binary ripple counter, the MC14018B implements decade-oriented counting with individually available outputs and separate asynchronous controls for preset and reset. Presetting occurs when the preset-enable input is driven to a logic 1, while the counter can be reset asynchronously through its dedicated reset input.

The principal functional characteristics include five Johnson counter stages, positive-edge clock operation, asynchronous preset and reset functions, and five decoded outputs suitable for driving five sequential stages. The asynchronous control paths allow an external system to establish a known count immediately rather than waiting for a clock edge. This is useful when synchronization with another subsystem or a system initialization sequence is required.

The MC14018B is implemented as a CMOS logic device, placing it within the low-dropout and low-power digital IC family associated with battery-powered and low-voltage systems. The counter maintains state across clock transitions and can divide an input clock into lower-frequency or sequential timing signals. Its decoded outputs can also act as a five-position ring sequence for sequencing multiple loads or system phases.

Typical applications include programmable frequency dividers, digital timing generators, cyclic sequence counters, industrial control logic, and clock-domain distribution. It can be used where a compact five-step sequence is needed without implementing the counter from individual flip-flops. Because preset and reset are asynchronous, the device can also initialize a timing sequence after reset while the surrounding system is settling.

PCB implementation requires attention to unused inputs and signal transitions. Follow the onsemi MC14018B datasheet pin-description table for every connection, keep the clock and control traces short, and place any decoupling capacitor close to the supply pins. Because transition behavior can influence adjacent CMOS nets, avoid routing high-current or high-speed signals beside the counter outputs and use a defined reset strategy during power-up.

This page combines the functional description, pin and package guidance, application analysis, design notes, and sourcing information for the MC14018BF. The comparison section distinguishes the 16-pin plastic DIP MC14018BF from other MC14018B package and temperature options, helping engineers determine when a footprint or qualification change is required before substitution.

Drop-in-Alternativen für MC14018BF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

MC14018BF Grenzwerte & elektrische Eigenschaften

Counter Type Johnson counter / divide-by-N counter
Number of Counter Stages 5 stages
Clock Edge Positive-going edge
Counting Mode Synchronous
Preset Control Asynchronous, active logic 1 preset enable
Reset Control Asynchronous
Decoded Outputs 5 outputs
Logic Family CMOS
Temperature Grade Military
Gehäuse 16-pin plastic DIP
Pin-Anzahl 16 pins
Terminal Type Gull-wing
Package Shape Rectangular
Montageart Through-hole

MC14018BF rectangular Pinbelegungsleitfaden

Pinbelegung für MC14018BF (rectangular-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MC14018BF im rectangular-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MC14018BF.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MC14018BF ist geeignet für 6 Anwendungs: Programmable Frequency Divider, Five-Step Digital Sequencer, Industrial Timing Controller, Clock Divider and Rate Selector, Test and Measurement Trigger Sequencer, Battery-Powered Digital Logic.

⚡

Programmable Frequency Divider

The MC14018BF fits programmable divider designs because its five Johnson stages advance synchronously on each positive-going clock edge and expose decoded count outputs. According to the onsemi MC14018B datasheet, asynchronous preset control can establish an initial count without waiting for a clock transition. This makes the device useful when an external controller must select a division interval during initialization. Place the device between the source clock and divider output, observe the input clock’s maximum frequency, and apply a defined reset state before enabling the system clock.

🏭

Five-Step Digital Sequencer

The MC14018BF provides five decoded outputs that can represent successive states in a cyclic control sequence. The synchronous positive-edge counting behavior keeps the sequence aligned with a master clock, while the asynchronous reset input allows the sequence to return to a defined start condition. This arrangement can replace several discrete flip-flops when five ordered phases are sufficient. Confirm the maximum clock frequency for the selected supply voltage and use the manufacturer output truth table to assign each decoded output to the intended system phase.

🏭

Industrial Timing Controller

The MC14018BF is suitable for industrial timing and sequencing logic that requires repeatable five-position counting with external initialization. Its asynchronous preset and reset paths allow a supervisory circuit to establish a known state during equipment startup, while the clock input provides the timing reference for the sequence. Use this arrangement only after checking the device’s specified supply-voltage and temperature limits against the industrial environment. A deterministic reset supervisor should control the reset input so the timing state is established before normal operation begins.

🖥️

Clock Divider and Rate Selector

The MC14018BF can divide a reference clock into selectable timing intervals when the preset function is combined with external control logic. The onsemi MC14018B datasheet confirms that the five counter stages increment synchronously, avoiding the accumulated propagation delay associated with a ripple-counter arrangement. A decoded output can therefore become a lower-rate enable pulse for another subsystem. Validate the source-clock amplitude, frequency, and supply voltage against the device limits, and keep the selected output away from high-current switching paths to reduce timing disturbance.

🔧

Test and Measurement Trigger Sequencer

The MC14018BF can create a repeatable five-step trigger sequence in test equipment or measurement systems. Positive-edge counting makes every decoded output change in a controlled order, and asynchronous reset allows the sequence to be restarted at a defined instant. The counter can therefore coordinate measurement phases, instrument settling intervals, or acquisition stages. Keep the clock distribution isolated from sensitive analog paths, use a low-impedance reset driver, and follow the onsemi MC14018B datasheet when assigning outputs to avoid unintended combinations during startup.

📱

Battery-Powered Digital Logic

The MC14018BF can replace multiple counter flip-flops in a battery-powered control path where a compact fixed five-state sequence is needed. Its five decoded outputs provide visible count states without requiring a microcontroller to poll every phase. Before selecting it for low-power equipment, verify the operating-voltage range and quiescent-current limits in the onsemi MC14018B datasheet. Enable the counter only when required if the surrounding design permits clock gating, and use a defined reset or preset command to prevent extra transitions during power restoration.

What is the onsemi MC14018BF?
The onsemi MC14018BF is a five-stage Johnson counter and presettable divide-by-N logic IC in a 16-pin plastic DIP package. According to the onsemi MC14018B datasheet, it counts synchronously on the positive-going edge of the clock, increments the five counter stages, and provides asynchronous preset and reset functions. The device is intended for frequency division, five-step sequencing, ring-counter behavior, and other digital timing applications.
How does the MC14018BF counter increment?
The MC14018BF increments synchronously on each positive-going clock edge. According to the onsemi MC14018B datasheet, the five Johnson counter stages form a chained counting arrangement, and five decoded outputs expose the individual count positions. Unlike a binary ripple counter, the outputs remain part of a coordinated five-stage sequence, which is useful for cyclic control and timing functions.
How do preset and reset work on the MC14018BF?
The MC14018BF supports asynchronous preset and reset operations. According to the onsemi MC14018B datasheet, applying a logic 1 to the preset-enable input asynchronously presets the counter, while the dedicated reset input asynchronously clears the counter. These controls do not depend on a clock transition, allowing the counter to be initialized when another part of the system requires immediate synchronization.
Where can I download the MC14018BF datasheet PDF?
The MC14018BF datasheet is available through the onsemi MC14018B documentation identified on this page and through the linked PDF mirror. The document provides the authoritative pin descriptions, DC characteristics, timing information, and package drawings for MC14018BF. Use the pin-description table and ordering information in that document before assigning the 16 package pins or approving a substitute in a production design.
Where is the MC14018BF pinout located?
The MC14018BF pinout is located in the pin-description table of the onsemi MC14018B datasheet. The device is a 16-pin plastic DIP, and its diagram identifies the clock, asynchronous reset and preset controls, preset-enable input, supply connections, and five decoded outputs. Use the manufacturer diagram rather than inferring a pin arrangement from a visually similar counter because clock and control functions may be assigned differently.
Can the MC14018BF be used as a programmable frequency divider?
Yes, the MC14018BF can function as a programmable frequency divider because its five-stage Johnson counter advances on the positive clock edge and exposes five decoded count positions. According to the onsemi MC14018B datasheet, preset can asynchronously establish an initial count. This permits selectable division intervals when the preset logic is combined with external control circuitry.
MC14018BF vs MC14018BDG: which package should I choose?
Choose the MC14018BF when the PCB requires a 16-pin through-hole plastic DIP footprint, and choose MC14018BDG when a 16-pin surface-mount SOIC footprint is required. The verified DigiKey listing identifies MC14018BDG as a 16-SOIC divide-by-N counter, while MC14018BF is identified as a 16-pin plastic DIP. Because the physical footprints differ, MC14018BDG is not a pin-compatible drop-in replacement without PCB changes.
Is the MC14018BF suitable for industrial sequencing?
The MC14018BF is suitable for sequencing designs requiring five decoded count states, positive-edge clocking, and asynchronous initialization. According to the onsemi MC14018B datasheet, its preset and reset inputs can establish or clear the count without waiting for a clock edge. For industrial equipment, verify the device's specified supply-voltage and temperature limits against the application's environmental requirements before releasing the design.
What is the best drop-in replacement for MC14018BF?
No confirmed drop-in replacement for MC14018BF is established by the available manufacturer and cross-reference information. A valid drop-in replacement must retain the 16-pin plastic DIP footprint, pin assignments, control logic, supply range, and timing characteristics. MC14018BDG and other MC14018B package options cannot be treated as drop-ins because SOIC and plastic-DIP footprints require different PCB land patterns.
Can a CD4018B replace the MC14018BF?
A suitably packaged CD4018B may offer similar divide-by-N counter functionality, but it is only a drop-in replacement if its manufacturer-specific pinout, voltage range, timing, and package drawing exactly match the MC14018BF. No cross-manufacturer equivalent was confirmed with a verified 16-pin plastic DIP pin mapping. Therefore, treat a CD4018B as a design-review candidate rather than an approved drop-in substitute.
When should I choose MC14018BF instead of a software counter?
Choose the MC14018BF when the design benefits from autonomous five-step counting, decoded outputs, or asynchronous initialization without occupying a microcontroller timer or GPIO. The onsemi MC14018B datasheet confirms five Johnson stages, positive-edge counting, and asynchronous preset and reset. A software counter is preferable when the sequence must be reprogrammed frequently, stored in memory, or coordinated with complex firmware.
What design considerations apply when using the MC14018BF?
Use the manufacturer pin table for all 16 connections, apply the specified supply voltage, and ensure unused CMOS inputs are held at a defined logic level. Keep clock, reset, and preset traces short to reduce coupling into the decoded outputs. During power-up, use a controlled reset sequence so the counter does not begin from an unintended state, and follow the datasheet's decoupling and unused-pin instructions.
Is MC14018BF in stock and what is its lead time?
Current MC14018BF stock and production lead time should be requested through the Request a Quote form on this page. The available product listings identify the part as an onsemi presettable divide-by-N counter, but they do not provide a guaranteed inventory quantity or manufacturing schedule. Providing the required quantity and target date in the quote request allows the current supply position to be checked for the exact 16-pin DIP MPN.
Where can I buy MC14018BF online?
Use the Request a Quote form on this page to request MC14018BF availability, current unit pricing, quantity breaks, and lead time for the exact 16-pin plastic DIP MPN. The requested part should be identified as MC14018BF rather than the surface-mount MC14018BDG, because their packages and PCB footprints differ. Include the target quantity, reel or tube preference, and required shipment date in the request.
What are the key specifications of MC14018BF that engineers should know?
The MC14018BF is a 16-pin CMOS logic IC containing five asynchronously presettable and resettable Johnson counter stages. According to the onsemi MC14018B datasheet, it counts synchronously on the positive-going clock edge and offers five decoded outputs. Its key implementation constraints are the 16-pin plastic DIP footprint, asynchronous preset and reset controls, and the requirement to use the manufacturer pin table for exact signal assignments.

Technische Referenzdaten für MC14018BF – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MC14018BF when the design needs a compact five-stage Johnson counter with decoded outputs, positive-edge synchronous counting, and asynchronous preset and reset in a 16-pin through-hole plastic DIP package. It is especially useful for fixed five-step sequences, programmable frequency division, and timing systems that must initialize independently of a microcontroller. MC14018BDG is appropriate only when the PCB uses a surface-mount SOIC footprint; it is not a drop-in replacement because the land pattern differs. A software counter is preferable when the sequence must change frequently or when additional arithmetic and stored settings are required. Likewise, discrete flip-flops may be preferable if the design needs more than five states, variable stage count, or a specific output encoding. Before substitution, verify the manufacturer pinout, voltage range, timing limits, temperature grade, and package drawing rather than relying on the divide-by-N description alone.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 16-pin plastic DIP
Brand onsemi
Counter Stages 5 stages
Counter Type Johnson counter / divide-by-N counter
Clock Edge Positive-going edge
Counting Mode Synchronous
Preset Control Asynchronous, active logic 1 preset enable
Reset Control Asynchronous
Decoded Outputs 5 outputs
Logic Family CMOS

Wichtigste Unterscheidungsmerkmale

  • Five decoded states from one counter package (vs. Discrete flip-flop counter implementation)
  • Synchronous positive-edge progression (vs. Asynchronous ripple-counter implementation)
  • Asynchronous preset and reset initialization (vs. Software-initialized counter)

Designhinweise

Do not treat every MC14018B suffix as a drop-in equivalent for MC14018BF. MC14018BF uses a 16-pin plastic DIP footprint, while MC14018BD and MC14018BDG are identified as surface-mount SOIC options. Their land patterns are not interchangeable. Before selecting another suffix, compare the manufacturer pin-description table, package drawing, temperature range, and electrical timing characteristics; a similar counter function alone is insufficient for PCB compatibility.

Use the onsemi MC14018B pin-description table to assign all 16 package pins and place the counter close to the circuits that consume its decoded outputs. Keep the clock, preset, and reset nets short, and provide the supply decoupling recommended by the manufacturer. Since CMOS inputs can respond to nearby switching activity, avoid routing high-current or fast-edge traces parallel to the counter outputs, particularly in systems containing inductors or switching regulators.

Establish the counter’s initial state with a controlled reset pulse and release reset only when the clock source and control logic are stable. The asynchronous reset path can change the count without a clock edge, so uncontrolled reset release can generate an unintended decoded transition. If the source clock is noisy or has a slow edge, condition it before entering the counter and verify timing at the highest intended operating frequency and supply voltage.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for MC14018BF.

Ähnliche Suchanfragen

MC14018BF datasheet MC14018BF pinout MC14018BF datasheet pdf MC14018BF specifications MC14018BF equivalent MC14018BF replacement MC14018BF cross reference MC14018BF application circuit MC14018BF vs MC14018BDG MC14018BF price MC14018BF stock onsemi MC14018BF

Verwandte Bauteile & Begriffe

onsemi MC14018BF MC14018B MC14018BDG MC14C88BP Johnson counter divide-by-N counter counter IC CMOS logic logic IC digital counter frequency divider ring counter five-stage counter positive-edge clock asynchronous preset asynchronous reset decoded outputs 16-pin plastic DIP through-hole package industrial sequencing programmable frequency divider test and measurement supply decoupling clock timing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen