onsemi

MC33201VD - 2.2MHz Rail-to-Rail Op Amp | onsemi | SOIC-8

Teilenummer: MC33201VD ✓ Aktiv
1.8 V to 12 V Vdss 8-pin SOIC Package 50 mV under specified conditions Memory
MOQ: 1 |

MC33201VD Übersicht

onsemi MC33201VD is a single-circuit, general-purpose rail-to-rail operational amplifier with a 1.8 V to 12 V supply range, 2.2 MHz gain-bandwidth product, and 1 V/µs slew rate, housed in an 8-pin SOIC package. Its input stage can operate 200 mV beyond either supply rail without output phase reversal, while the output can swing to within 50 mV of the rails.

A rail-to-rail operational amplifier is an analog amplifier whose input and output voltage ranges extend close to the positive and negative supply rails. It belongs to the operational amplifier hierarchy within analog and signal-processing ICs, making it useful when a low-voltage system cannot support conventional amplifiers whose inputs and outputs remain farther from the supply limits. The MC33201 family is designed to preserve usable signal range in compact, single-supply equipment.

The principal operating characteristics include a 1.8 V to 12 V supply-voltage range, 2.2 MHz gain-bandwidth product, and 1 V/µs slew rate. Rail-to-rail input and output operation allows more of the available supply voltage to be used for signal conditioning. The input can be driven 200 mV beyond the supply rails without phase reversal, helping the amplifier tolerate overdrive near the rail limits. Output swing is specified to remain within 50 mV of each rail under the stated conditions.

The MC33201 is a single amplifier with one noninverting input, one inverting input, and one output. Its 8-pin SOIC package provides a conventional small-surface-mount implementation for analog boards. The combination of low minimum supply voltage, broad rail-to-rail coverage, and moderate bandwidth supports general-purpose amplification, current-voltage conversion, sensor conditioning, and filtering. These characteristics make it more appropriate for low-to-moderate frequency precision analog stages than for high-speed signal chains.

Typical applications include portable sensor interfaces, battery-powered instrumentation, low-voltage control systems, transducer signal conditioning, and audio input stages. The amplifier can operate from a 1.8 V supply, which is useful for energy-efficient systems with limited rail headroom. Its 2.2 MHz gain-bandwidth product allows moderate closed-loop bandwidth at practical gains, while the 1 V/µs slew rate supports responsive changes to waveforms within that bandwidth limit.

The principal design tradeoff is the relationship between bandwidth, supply voltage, output load, and stability. Place the device close to the feedback network and supply bypass components, keep feedback traces short, and verify the configuration against the manufacturer’s recommended compensation methods. The VD ordering code is associated with an 8-pin SOIC package, but production-temperature, tape-and-reel, and orderable-package details should be confirmed against the current onsemi product record before release.

This page organizes the MC33201VD operating envelope, verified alternatives, package and pin information, cross-reference comparisons, and practical application guidance. It also distinguishes electrical limits from package-ordering details so engineers can assess board compatibility, bandwidth, supply headroom, and thermal or sourcing constraints before selecting the amplifier.

Drop-in-Alternativen für MC33201VD – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MC33201VD (gleiche Bauform und Footprint) – abweichend in Product Type.

onsemi
Product Type: Dual operational amplifier
Vergleichen mit MC33201VD →

MC33201DG

✅ Drop-In
📦 8-pin SOIC
Same MC33201 single-amplifier architecture and 8-pin SOIC footprint; ordering-suffix temperature-grade details require confirmation, with an estimated parameter match of 100% for the shared family ratings.

📋 Referenzalternative (nicht im Katalog)

MC33201DR2G

✅ Drop-In
📦 8-pin SOIC
Same MC33201 architecture and 8-pin SOIC package; the ordering suffix differs, with no change to the shared 1.8 V to 12 V supply, 2.2 MHz GBW, or 1 V/µs slew-rate ratings.

📋 Referenzalternative (nicht im Katalog)

MC33201VDR2G

✅ Drop-In
📦 8-pin SOIC
Same MC33201 family and 8-pin SOIC footprint; suffix-specific grade or marking differs, while the shared family data indicate matching 1.8 V to 12 V operation, 2.2 MHz GBW, and 1 V/µs slew rate.

📋 Referenzalternative (nicht im Katalog)

NCV33201VD

✅ Drop-In
📦 8-pin SOIC
Same MC33201-family electrical architecture and 8-pin SOIC layout in the NCV automotive series; qualification and temperature-grade differences must be checked against the application.

📋 Referenzalternative (nicht im Katalog)

MC33202VD

✅ Drop-In
onsemi
📦 8-pin SOIC
2 channels · Dual operational amplifier · 1.8 V to 12 V · Rail-to-rail · 200 mV beyond the supply rails · Within 50 mV of each supply rail · Rail-to-rail · General-purpose amplifier

Preis auf Anfrage

Datenblatt ansehen →

MC33201VD Grenzwerte & elektrische Eigenschaften

Number of Amplifiers 1 circuit
Product Type General-purpose operational amplifier
Supply Voltage Range 1.8 V to 12 V
Gain-Bandwidth Product 2.2 MHz
Slew Rate 1 V/µs
Input Common-Mode Range Rail-to-rail
Ausgangsspannungsbereich Rail-to-rail
Maximum Input Overdrive Without Phase Reversal 200 mV beyond the supply rails
Maximum Output Distance From Rail 50 mV under specified conditions
Anzahl der Pins 8 pins
Gehäuse 8-pin SOIC
Montageart Surface mount

MC33201VD Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUTA — Amplifier A output
Pin 2 INTA- — Inverting input for amplifier A
Pin 3 INTA+ — Noninverting input for amplifier A
Pin 4 V- — Negative supply connection
Pin 5 INTB+ — Noninverting input for amplifier B
Pin 6 INTB- — Inverting input for amplifier B
Pin 7 OUTB — Amplifier B output
Pin 8 V+ — Positive supply connection

Typische Anwendungen

MC33201VD ist geeignet für 6 Anwendungs: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Industrial Transducer Interface, Low-Voltage Audio Input Stage, Active Filtering and Feedback Control, Low-Voltage Power-Sense Conditioning.

🧩

Portable Sensor Signal Conditioning

The MC33201VD fits low-voltage sensor interfaces because it operates from 1.8 V to 12 V and accepts input signals extending to the supply-rail region. A 2.2 MHz gain-bandwidth product supports sensors with moderate bandwidth, while rail-to-rail output behavior preserves usable dynamic range in compact, battery-powered products. Place the amplifier near the sensor and feedback components to minimize noise pickup and ground offsets. Confirm the sensor’s output range and the amplifier’s offset, bias-current, and common-mode requirements before fixing the gain.

🔋

Battery-Powered Instrumentation

The MC33201VD is useful in battery-powered instrumentation where a 1.8 V minimum supply preserves signal headroom and reduces system power requirements. Its rail-to-rail inputs and outputs allow a transducer output to be amplified without requiring a bipolar supply. The 1 V/µs slew rate supports moderate-amplitude sensor transients, and the 2.2 MHz gain-bandwidth product covers many slow measurement channels. Verify output loading, common-mode range, and offset behavior at the lowest operating supply voltage before finalizing the analog front end.

🏭

Industrial Transducer Interface

The MC33201VD can amplify low-level industrial transducer signals from a 1.8 V to 12 V control system. Rail-to-rail input operation is valuable when the sensor output approaches either supply limit, and the 1 V/µs slew rate provides useful transient response for slow process signals. The 2.2 MHz gain-bandwidth product is adequate for many temperature, pressure, and position interfaces. Keep the sensor return tied to the amplifier reference properly and route high-current switching paths away from the feedback and input nodes.

🎧

Low-Voltage Audio Input Stage

The MC33201VD is appropriate for a low-voltage audio input buffer when the signal bandwidth and slew requirements are moderate. Its rail-to-rail input and output behavior allows operation close to the supply limits, while the 2.2 MHz gain-bandwidth product and 1 V/µs slew rate handle many microphone and line-level signals. Decouple the supply pins locally and use short, shielded input routing to prevent audible pickup. Avoid using the 2.2 MHz bandwidth figure as a guarantee of wideband audio performance because slew rate and output loading can become limiting.

⚙️

Active Filtering and Feedback Control

The MC33201VD can implement active filters and closed-loop control stages operating from low-voltage rails. Its 2.2 MHz gain-bandwidth product permits useful closed-loop bandwidth at moderate gains, while rail-to-rail output swing improves utilization of the available supply voltage. Stability and phase margin must be checked for the exact noise gain and load rather than relying only on nominal bandwidth. Use short feedback paths, maintain symmetrical resistor layouts where practical, and include the output load in simulations before manufacturing.

⚡

Low-Voltage Power-Sense Conditioning

The MC33201VD is suitable for conditioning a scaled power or battery-sense signal before comparison and control circuitry. Operation from 1.8 V permits use in low-energy systems, and rail-to-rail input capability helps accommodate sense signals that span much of the available supply range. The 1 V/µs slew rate is more than adequate for many slow power-monitor signals. The amplifier does not replace a dedicated analog-to-converter when high resolution or sampling speed is required, but it provides a useful analog conditioning stage ahead of a controller or converter.

What is the operating voltage of MC33201VD?
The MC33201VD operates from 1.8 V to 12 V. According to the onsemi MC33201 family datasheet, the amplifier is designed for low-voltage, single-supply operation while providing rail-to-rail performance at both the input and output. Designers should verify that the input signal, output load, and required output voltage remain within the device’s electrical limits at the selected supply voltage.
What are the key specifications of MC33201VD that engineers should know?
The MC33201VD is a single amplifier with a 1.8 V to 12 V supply range, 2.2 MHz gain-bandwidth product, and 1 V/µs slew rate. The onsemi MC33201 family datasheet also specifies rail-to-rail inputs and outputs, operation 200 mV beyond the supply rails without phase reversal, and output swing within 50 mV of each rail. It is packaged in an 8-pin SOIC.
Where can I download the MC33201VD datasheet PDF?
The MC33201VD datasheet is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc33201-d.pdf. The document covers the MC33201, MC33202, and MC33204 rail-to-rail operational-amplifier family. Use its device-specific ordering table to confirm the exact package, temperature grade, and marking associated with MC33201VD before placing the part into a production BOM.
Where is the MC33201VD pinout located?
The MC33201VD pinout is shown in the onsemi MC33201 family datasheet, whose official PDF is linked on this page. The device uses an 8-pin SOIC with the standard single-amplifier arrangement: pin 1 is output A, pin 2 is inverting input A, pin 3 is noninverting input A, pin 4 is the negative supply, pin 5 is noninverting input B, pin 6 is inverting input B, pin 7 is output B, and pin 8 is the positive supply.
What is the gain-bandwidth product of MC33201VD?
The MC33201VD has a 2.2 MHz gain-bandwidth product. According to the onsemi MC33201 family datasheet, this supports moderate-frequency amplification and feedback-filter applications when operated within the recommended supply and output-voltage limits. A practical closed-loop bandwidth must also account for noise gain, loop gain, load, stability compensation, and the 1 V/µs slew-rate ceiling.
Is MC33201VD rail-to-rail on input and output?
Yes, the MC33201VD provides rail-to-rail operation on both inputs and output. The onsemi MC33201 family datasheet states that inputs may be driven as much as 200 mV beyond the supply rails without output phase reversal, and that the output can swing within 50 mV of each rail. These limits allow more of a low-voltage supply to be used for analog signal range.
Can MC33201VD operate from a 1.8 V supply?
The MC33201VD can operate from a 1.8 V supply, making it suitable for low-voltage sensor and portable-system designs. According to the onsemi MC33201 family datasheet, its specified supply range is 1.8 V to 12 V. At the minimum supply, designers should check the required output swing, common-mode range, load current, and stability at the selected noise gain.
What can replace MC33201VD as a drop-in part?
MC33201DG, MC33201DR2G, MC33201VDR2G, NCV33201VD, and MC33202VD are potential same-package choices to evaluate against MC33201VD. The onsemi MC33201 family datasheet establishes the shared family architecture, while ordering tables establish the available package variants. Confirm exact temperature grade, pin configuration, electrical limits, and stability characteristics before treating any candidate as a production replacement.
Is MC33201VD the same as MC33201DG?
MC33201VD and MC33201DG both identify onsemi versions of the MC33201 single operational amplifier, but the suffix can encode package, temperature grade, or shipping configuration. The onsemi MC33201 family datasheet and its ordering information should be used to distinguish the exact variants. The MC33201DG listing shown for MC33201-family devices confirms that an 8-pin SOIC option exists.
MC33201VD vs MC33202VD - which is better for low-voltage design?
MC33201VD and MC33202VD belong to the same onsemi rail-to-rail family and share the 1.8 V to 12 V supply range, 2.2 MHz gain-bandwidth product, and 1 V/µs slew rate. According to the MC33201 family datasheet, selection can depend on stability and output-behavior details specific to each device. Use the individual device specifications to determine whether the chosen amplifier configuration is stable at the required noise gain.
When should I choose MC33201VD over MC33204VD?
Choose MC33201VD when the circuit needs one independently connected amplifier in an 8-pin SOIC package. MC33204 is a four-amplifier family member and therefore does not provide a direct one-to-one footprint substitution for the single MC33201VD. Although both families support low-voltage rail-to-rail operation, channel count and package pin arrangement must be compared before choosing an alternative.
Is MC33201VD suitable for sensor signal conditioning?
The MC33201VD is suitable for many low-voltage sensor-conditioning applications because it operates from 1.8 V to 12 V and has rail-to-rail input and output behavior. Its 2.2 MHz gain-bandwidth product is appropriate for sensors with moderate signal bandwidth, while the 1 V/µs slew rate helps accommodate waveform transitions. Sensor noise, offset, bias current, and common-mode limits still require separate review.
What is the best onsemi equivalent for MC33201VD?
MC33201DG is the closest onsemi ordering candidate for evaluation because it is an MC33201-family device offered in an 8-pin SOIC configuration. The onsemi MC33201 family datasheet confirms the shared family architecture, including the 1.8 V to 12 V supply range, 2.2 MHz gain-bandwidth product, and rail-to-rail operation. Confirm ordering-suffix and temperature-grade details before final substitution.
Where to buy MC33201VD online?
Use the Request a Quote form on this page to request MC33201VD pricing, stock, and lead time. The quote form is the appropriate channel for current commercial terms because availability and pricing can change with package, temperature grade, quantity, and market conditions. Provide the exact MC33201VD suffix when requesting a quotation to avoid ambiguity within the onsemi product family.
What is the price of MC33201VD?
Request current MC33201VD pricing through the Request a Quote form on this page. The quoted amount should be evaluated against the required quantity, package form, temperature grade, and delivery terms. Because MC33201VD belongs to a family with several ordering suffixes, include the complete part number when requesting a quotation for the exact device needed.
What is the lead time for MC33201VD and is it in stock?
Request the current MC33201VD stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Current availability can vary by ordering suffix and production lot, particularly when the exact MC33201VD package and temperature grade are required. Include your target quantity and required delivery date so the commercial response can reflect the actual production need.
How much output swing does MC33201VD provide?
The MC33201VD output can swing within 50 mV of each supply rail under the conditions described in the onsemi MC33201 family datasheet. This rail-to-rail output behavior is useful in 1.8 V and 3.3 V systems where a conventional amplifier would leave less usable signal range. The actual reachable voltage also depends on output load, supply voltage, frequency, and the device operating region.
Does MC33201VD support automotive applications?
The NCV33201 family is the automotive-oriented naming within the onsemi MC33201, MC33202, and MC33204 documentation, while MC33201VD requires separate orderable-part and qualification review. Do not infer automotive qualification from the MC33201VD suffix alone. Confirm the manufacturer’s ordering table, automotive qualification status, traceability requirements, and temperature grade before using the device in a vehicle application.

Technische Referenzdaten für MC33201VD – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MC33201VD for a single general-purpose amplifier operating from 1.8 V to 12 V when the design needs rail-to-rail input and output behavior, a 2.2 MHz gain-bandwidth product, and a 1 V/µs slew rate. Select MC33201DG or MC33201DR2G when their onsemi ordering-table attributes better match the required temperature grade, package, or shipping format; their shared family architecture makes them strong drop-in evaluation candidates. Use NCV33201VD when the application requires the automotive-series device and its associated qualification package. Consider MC33202VD when its different device-specific stability characteristics provide a better fit for the intended gain and load. None of these choices should be finalized solely by package matching: confirm electrical limits, temperature grade, qualification, marking, and lifecycle status against the current onsemi datasheet and ordering information.

Vergleich mit Alternativen

Parameter Dieses Produkt MC33201DG MC33201DR2G NCV33201VD MC33202VD
Brand onsemi onsemi onsemi onsemi onsemi
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Amplifiers 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Supply Voltage Range 1.8 V to 12 V 1.8 V to 12 V 1.8 V to 12 V 1.8 V to 12 V 1.8 V to 12 V
Gain-Bandwidth Product 2.2 MHz 2.2 MHz 2.2 MHz 2.2 MHz 2.2 MHz
Slew Rate 1 V/µs 1 V/µs 1 V/µs 1 V/µs 1 V/µs
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Voltage Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Input Overdrive Without Phase Reversal 200 mV beyond the supply rails 200 mV beyond the supply rails 200 mV beyond the supply rails 200 mV beyond the supply rails 200 mV beyond the supply rails
Maximum Output Distance From Rail 50 mV 50 mV 50 mV 50 mV 50 mV
Exact Device-Specific Stability Profile MC33201 device profile MC33201 device profile; suffix-specific ordering details apply MC33201 device profile; suffix-specific ordering details apply NCV-qualified family profile; automotive details apply MC33202 device profile

Wichtigste Unterscheidungsmerkmale

  • Single-amplifier 8-pin SOIC configuration (vs. MC33202VD)
  • Rail-to-rail operation from a 1.8 V supply (vs. NCV33201VD)
  • Low-voltage bandwidth and transient capability (vs. MC33201DG)

Designhinweise

Place the MC33201VD close to the feedback components and the circuit it serves. Keep the noninverting input route short and away from switching nodes, because its high-impedance input can pick up induced noise even when the amplifier bandwidth is adequate. Connect the supply bypass capacitor directly between the local V+ and V- pins, with a short ground return. The 8-pin SOIC layout also places the two amplifier channels in a standard single-op-amp arrangement.

Validate the selected gain against the 2.2 MHz gain-bandwidth product rather than assuming the full device bandwidth is available at every closed-loop gain. Include the actual load capacitance, source resistance, and feedback network in an AC simulation. MC33201 and MC33202 can have different stability behavior, so a candidate substitution must be checked in the complete amplifier topology rather than by footprint alone.

Design the analog rail for the intended operating range of 1.8 V to 12 V, including startup and regulator tolerance. Rail-to-rail operation does not imply zero headroom: the datasheet allows input overdrive up to 200 mV beyond the rails without phase reversal and specifies output swing within 50 mV of the rails under defined conditions. Confirm the actual signal extremes and load direction before reserving the final rail margin.

Do not treat MC33201VD, MC33201DG, MC33201DR2G, and MC33201VDR2G as interchangeable without checking the onsemi ordering table. Their suffix differences can affect temperature grade, package form, marking, or shipment configuration even when the core electrical family is the same. For automotive or other regulated applications, verify qualification and traceability rather than relying on the generic MC33201 family rating.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The onsemi MC33201 family datasheet identifies the NCV33201 series for automotive-related ordering, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for MC33201VD must be taken from the current manufacturer product or quality documentation.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MC33201VD datasheet MC33201VD datasheet pdf MC33201VD pinout MC33201VD equivalent MC33201VD replacement MC33201VD vs MC33202VD onsemi MC33201VD MC33201VD 1.8V 12V MC33201VD 2.2MHz MC33201VD SOIC-8 MC33201VD sensor amplifier MC33201VD price MC33201VD stock MC33201VD drop-in replacement MC33201 application circuit

Verwandte Bauteile & Begriffe

onsemi MC33201VD MC33201DG MC33201DR2G MC33201VDR2G NCV33201VD MC33202VD MC33204D operational amplifier rail-to-rail operational amplifier single amplifier analog signal conditioning gain-bandwidth product slew rate common-mode range supply voltage 8-pin SOIC SOIC package family surface-mount package sensor interface battery-powered instrumentation active filter power-sense conditioning input overdrive output swing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen