MC33660EF - ISO 9141 K-Line Interface | NXP | Automotive
Teilenummer: MC33660EF ✓ AktivMC33660EF Übersicht
An ISO K-line transceiver is an automotive interface device that connects a microcontroller's serial communications port to the physical diagnostic bus. It belongs to the broader interface IC and vehicle-network communication hierarchy. Its purpose is to translate controller-level logic into an appropriate bus signal, support in-vehicle diagnostic communication, and provide bus-side fault protection where the connected wiring can be exposed to shorts or excessive temperature.
According to the NXP manufacturer datasheet, the MC33660 is designed to meet the ISO 9141 diagnostic-system specification. The interface supports bi-directional, half-duplex operation, allowing the same physical connection to transmit requests and receive responses. Its K-line bus-driver output is protected against bus shorts and over-temperature conditions, addressing common electrical stresses encountered in automotive diagnostic environments.
The 8-SOIC package makes the MC33660EF suitable for compact automotive electronic-control units, diagnostic scan tools, passenger-compartment modules, powertrain controllers, body-control modules, and gateway electronics. The key design consideration is that the communication node must correctly implement the electrical and timing behavior required by the vehicle's ISO 9141 network rather than treating the device as a general-purpose UART transceiver.
When laying out a circuit using the MC33660EF, place input and output decoupling close to the device, route the K-line connection away from sensitive analog and communication nodes, and review the datasheet's external-component recommendations. The protected bus output does not remove the need for correct connector protection, grounding, vehicle transient design, or system-level diagnostic compliance.
This product summary combines the device function, package information, automotive diagnostic role, and practical interface considerations. It also highlights the distinction between a true pin-compatible replacement and a merely similar interface IC, helping engineers evaluate board changes, protection behavior, and ISO 9141 compatibility before making a sourcing decision.
Drop-in-Alternativen für MC33660EF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernMC33660EF Technische Daten
| Product Type | ISO 9141 K-line serial-link interface IC |
| Communication Direction | Bidirectional |
| Duplex Mode | Half-duplex |
| Diagnostic Standard | ISO 9141 |
| Bus Interface | K line |
| Bus Output Protection | Protected against bus shorts and over-temperature conditions |
| Intended Host | Vehicle on-board microcontroller |
| External Communication | Off-board automotive diagnostic system |
| Gehäuse | 8-pin SOIC |
| Montageart | Surface mount |
MC33660EF 8-pin soic Pinbelegungsleitfaden
Pinbelegung für MC33660EF (8-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für MC33660EF.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC33660EF ist geeignet für 6 Anwendungs: Vehicle Diagnostic Interface Modules, Body Control Modules, Powertrain Control Units, Passenger Compartment Modules, Automotive Gateway Electronics, Automotive Scan and Service Interfaces.
Vehicle Diagnostic Interface Modules
The MC33660EF fits an on-board diagnostic module that exchanges requests and responses with an off-board test system through the ISO 9141 K line. Its bidirectional, half-duplex operation allows a controller to transmit a diagnostic request and receive the corresponding reply over one physical bus. According to the NXP manufacturer datasheet, the K-line bus-driver output is protected against bus shorts and over-temperature conditions, making it a practical choice when the diagnostic connector and harness can expose the electronics to vehicle-wiring faults. The surrounding module still needs appropriate supply conditioning, connector protection, grounding, and diagnostic-network timing.
Empfohlen
Body Control Modules
A body control module can use the MC33660EF to provide an ISO 9141 diagnostic connection between its on-board microcontroller and external service equipment. The device's half-duplex bus interface suits a controller that must issue a diagnostic request, switch direction, and process the response. Its 8-SOIC package is useful where board area is constrained, while the short-circuit and over-temperature protection in the bus-driver output adds robustness at the physical vehicle interface. Production design must confirm the module's supply limits, operating-temperature grade, external components, and network timing against the manufacturer datasheet.
Empfohlen
Powertrain Control Units
The MC33660EF can support diagnostic access in a powertrain electronic-control unit that communicates with an off-board vehicle diagnostic system over ISO 9141. Bidirectional half-duplex communication enables the embedded controller to exchange diagnostic information without requiring separate transmit and receive bus paths. The protected K-line driver output is particularly relevant in an automotive harness environment where wiring shorts or thermal conditions may occur. Because this component addresses the physical diagnostic interface rather than control algorithms, it should be paired with an automotive-capable controller and validated as part of the complete ECU power and qualification design.
Empfohlen
Passenger Compartment Modules
In a passenger-compartment module, the MC33660EF provides a compact ISO 9141 path between the module's microcontroller and vehicle service equipment. The 8-SOIC format supports surface-mount PCB integration, while the bidirectional half-duplex interface reduces the number of physical K-line connections needed for request-and-response diagnostics. The manufacturer datasheet states that the bus-driver output is protected against bus shorts and over-temperature conditions. Engineering review should still address connector pin definition, wake-up behavior, supply sequencing, transient immunity, and the diagnostic timing expected by the vehicle manufacturer.
Empfohlen
Automotive Gateway Electronics
The MC33660EF can be used in gateway or electrical-center electronics that expose an ISO 9141 diagnostic connection to a vehicle microcontroller. The bus interface supports the half-duplex request-and-response pattern used by off-board diagnostic communication. Protection in the K-line output helps the interface tolerate shorts and over-temperature conditions encountered in vehicle wiring, while the 8-SOIC package simplifies board-level routing. The gateway designer must still coordinate protocol routing, diagnostic addressing, wake conditions, ground referencing, and protection at the external connector so that the device operates within its documented electrical limits.
Empfohlen
Automotive Scan and Service Interfaces
The MC33660EF can form part of a service-oriented vehicle interface that connects test equipment to an electronic control unit through the ISO K line. Bidirectional half-duplex communication allows diagnostic commands to travel toward the vehicle and responses to return over the same physical connection. Its protected bus-driver output is useful at the boundary between protected automotive electronics and an accessible diagnostic connector. A practical implementation must include suitable connector-side protection, compliant bus timing, a stable supply source, and verification that the diagnostic protocol and signal levels match the target vehicle network.
Empfohlen
Technische Referenzdaten für MC33660EF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Designhinweise
Place the MC33660EF close to the protected K-line connector path and keep the bus trace short, continuous, and away from sensitive analog or high-speed communication nodes. Follow the NXP manufacturer datasheet for the exact external-component arrangement. Ground and supply-return paths should be planned together with the K-line return so diagnostic signals do not share noisy high-current return segments.
Do not assume that a similar SOIC-8 interface IC is interchangeable with the MC33660EF. Confirm the manufacturer pin-description table, supply range, K-line output limits, communication timing, temperature rating, and protection specifications before replacing the component. The device's short-circuit and over-temperature protection applies to the bus-driver output and does not replace connector-side transient protection or a complete ISO 9141 network design.
Use the NXP manufacturer datasheet to select the device's local bypass capacitors and power routing. Keep the supply reference stable at the IC and provide adequate ground-plane continuity beneath the package. Because the operating-voltage and current limits are not reproduced here, verify them directly against the manufacturer electrical-characteristics table before sizing the ECU power supply or adding external protection components.
Compliance-Informationen
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the available manufacturer or distributor information. Confirm qualification and material-compliance documents for the exact ordering code before automotive production release.