STMicroelectronics

MC3403PT - Quad Low-Power Op Amp | STMicroelectronics

Teilenummer: MC3403PT ✓ Aktiv
Up to +36 V Vdss 500 nA Id 14-pin TSSOP Package
MOQ: 1 |

MC3403PT Übersicht

STMicroelectronics MC3403PT is a four-circuit, low-power bipolar operational amplifier packaged in a 14-pin TSSOP. Each amplifier supports single-supply operation to +36 V and dual-supply operation to ±18 V, providing broad flexibility for industrial, analog-control, instrumentation, and signal-conditioning designs. The device offers a 1 MHz gain-bandwidth product, internally compensated operation, short-circuit-protected outputs, and a Class AB output stage.

An operational amplifier is an analog integrated circuit that uses high-gain feedback to amplify the difference between two input voltages. Within the broader semiconductor hierarchy, the MC3403PT belongs to the operational-amplifier family, which falls under analog amplifier ICs and signal-processing semiconductors. The quad configuration places four independent amplifiers in one package, reducing board area in designs requiring multiple buffered or gain-stage channels.

The principal features of the MC3403PT include a maximum input bias current of 500 nA, internal compensation, short-circuit-protected outputs, and a minimum Class AB output stage for reduced crossover distortion. Its 1 MHz gain-bandwidth product supports general-purpose amplification at low and moderate frequencies. Single-supply operation up to +36 V is especially useful when the signal source and load share a positive reference without a negative rail.

The bipolar input stage supports operation from dual supplies of ±18 V or a single supply up to +36 V. Internal compensation simplifies circuit construction because separate external compensation components are not required for ordinary closed-loop amplifier use. Four independent channels can also be configured as voltage followers, non-inverting or inverting amplifiers, differential stages, comparators in suitable circuits, or general analog signal-conditioning elements.

Typical uses include low-frequency sensor amplification, industrial control loops, audio preamplification, active filtering, transducers, sample-and-hold stages, and general-purpose analog boards. The quad package is particularly useful when a design needs several channels with the same supply architecture. Engineers should also evaluate output swing, slew rate, input common-mode range, and load capability against their particular signal chain.

For layout, place input and output paths away from high-current switching nodes and connect the supply pins to a low-impedance bypass network. Stable feedback networks and properly grounded unused channels help prevent oscillation or unintended signal coupling. Use the manufacturer pin table and electrical-characteristics curves to verify the final operating points.

This product page combines manufacturer and distributor technical information, package and pin details, lifecycle-oriented sourcing guidance, application analysis, and validated drop-in alternatives. It also highlights the differences engineers should evaluate before replacing the MC3403PT on an existing 14-pin TSSOP layout.

Drop-in-Alternativen für MC3403PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MC3403PT (gleiche Bauform und Footprint) – abweichend in Package.

STMicroelectronics
Package: 14-pin SOIC
Vergleichen mit MC3403PT →

MC3403DT

✅ Drop-In ⚠️ Spezifikationen ungeprüft
STMicroelectronics
📦 14-pin TSSOP
4 amplifiers · 1 MHz · 3 V to 36 V · +/-18 V · 500 nA maximum · True differential inputs · Internally compensated · Class AB

Preis auf Anfrage

Datenblatt ansehen →

MC3403PT

✅ Drop-In
STMicroelectronics
📦 14-pin TSSOP
General-purpose bipolar operational amplifier · 4 circuits · 4 amplifiers · 1 MHz · Up to +36 V · Up to ±18 V · 500 nA · Internally compensated

Preis auf Anfrage

Datenblatt ansehen →

MC3403PT Grenzwerte & elektrische Eigenschaften

Amplifier Type General-purpose bipolar operational amplifier
Number of Circuits 4 circuits
Number of Amplifiers 4 amplifiers
Gain-Bandwidth Product 1 MHz
Single-Supply Operating Range Up to +36 V
Dual-Supply Operating Range Up to ±18 V
Maximum Input Bias Current 500 nA
Compensation Internally compensated
Output Stage Class AB
Output Protection Short-circuit protected
Gehäuse 14-pin TSSOP
Montageart Surface mount
Betriebstemperaturbereich -25 °C to +85 °C

MC3403PT Pin-Konfiguration

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 IN3- — Amplifier 3 inverting input
Pin 10 IN3+ — Amplifier 3 non-inverting input
Pin 11 V+ — Positive supply connection
Pin 12 IN4+ — Amplifier 4 non-inverting input
Pin 13 IN4- — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Typische Anwendungen

MC3403PT ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Audio Preamplification, Active Filtering and Control Loops, Transducer and Instrumentation Amplification, General-Purpose Analog Interface Boards, Power-Supply Feedback and Monitoring.

🏭

Industrial Sensor Signal Conditioning

The STMicroelectronics MC3403PT fits low-frequency industrial sensor-conditioning circuits requiring several amplifier channels on one supply. Its four 1 MHz amplifiers can amplify sensor outputs, buffer inputs, and form active-filter stages without adding four separate packages. The 500 nA maximum input bias current is useful with moderate source impedances, although very high-impedance sensors may require lower-bias devices. Check input offset voltage, common-mode range, and output swing under the actual 36 V maximum supply condition before finalizing the front end.

🎧

Audio Preamplification

The MC3403PT can implement low-frequency audio preamplifier and buffering stages where a compact four-channel package is advantageous. Its 1 MHz gain-bandwidth product is suitable for common audio control paths, while the Class AB output stage is designed to minimize crossover distortion. The four channels can serve as microphone preamplifier, tone-control, headphone-driver-adjacent, and monitoring stages. Confirm output-current capability, slew rate, input-noise performance, and load stability against the selected audio bandwidth before using it near the output stage.

🔧

Active Filtering and Control Loops

The four internally compensated channels in the MC3403PT can implement active filters, integrators, error amplifiers, and industrial control-loop functions. A 1 MHz gain-bandwidth product provides useful bandwidth for slow closed-loop systems, while short-circuit-protected outputs support dependable integration into regulated control hardware. Feedback-component tolerances and amplifier offset directly influence filter accuracy, so calculate those effects before production. Also confirm that the selected loop gain remains compatible with the device's open-loop response and phase margin.

📡

Transducer and Instrumentation Amplification

The MC3403PT is applicable to low-frequency instrumentation paths that need multiple buffered channels for transducers, bridges, or test fixtures. Its maximum input bias current of 500 nA is manageable for many medium-impedance sources, and operation from a single supply up to +36 V simplifies higher-voltage industrial systems. Instrumentation accuracy still depends on input offset, input voltage and current noise, source resistance, and common-mode rejection. Use the manufacturer characteristics and layout recommendations to establish the achievable measurement precision.

🔬

General-Purpose Analog Interface Boards

MC3403PT is suitable for educational, prototyping, and general analog interface boards that require four general-purpose amplifier channels. The internally compensated devices simplify standard non-inverting, inverting, voltage-follower, and comparator-style configurations. A single 14-pin TSSOP reduces board area while dual- or single-supply flexibility permits operation across multiple laboratory and industrial voltages. Designers should still provide bypassing, maintain short feedback routes, ground unused channels appropriately, and verify the output stage against the intended load.

⚡

Power-Supply Feedback and Monitoring

The MC3403PT can support low-frequency feedback, monitoring, and fault-detection functions in linear power-supply designs. Four independent channels allow separate use for output-voltage sensing, current-command buffering, and protection logic interfaces. Its broad single-supply capability can accommodate industrial rails up to +36 V, subject to the applicable input and output limits. When the amplifier drives a power stage, check phase margin and compensation carefully; when it monitors a high-voltage node, use an appropriate front-end network rather than exceeding the input ratings.

What is the operating voltage of MC3403PT?
The STMicroelectronics MC3403PT supports a single supply up to +36 V and dual supplies up to ±18 V. According to the MC3403 datasheet, this range allows the four amplifiers to operate from conventional industrial supply arrangements while retaining ground-referenced signal-processing capability. Verify the input common-mode range and output-swing limits at the selected supply voltage before finalizing the circuit.
What are the key specifications of MC3403PT that engineers should know?
The MC3403PT is a quad, low-power, bipolar operational amplifier with four independent circuits, a 1 MHz gain-bandwidth product, internal compensation, short-circuit-protected outputs, and a Class AB output stage. According to the manufacturer datasheet, it supports single-supply operation to +36 V, dual-supply operation to ±18 V, and a maximum input bias current of 500 nA. It is supplied in a 14-pin TSSOP package.
Where to download the MC3403PT datasheet PDF?
The MC3403PT datasheet PDF is available through the official document link on this page, with an additional manufacturer and distributor technical listing linked below. According to the manufacturer datasheet, the document covers the four-amplifier configuration, supply limits, input bias current, internal compensation, output-stage characteristics, and package information. Use the manufacturer pin table when assigning the TSSOP-14 footprint.
Where can I find the MC3403PT pinout?
The MC3403PT pinout is shown in the 14-pin pin table on this page and follows the standard quad operational-amplifier arrangement. According to the manufacturer datasheet, four amplifiers share supply pins while retaining separate input and output pins. Confirm every net against the pin-description table before fabrication, especially when replacing another 14-pin amplifier on an existing board.
What is the gain-bandwidth product of MC3403PT?
The MC3403PT has a 1 MHz gain-bandwidth product. According to the manufacturer datasheet, that bandwidth supports general-purpose low-frequency amplification and is consistent with the device's low-power, internally compensated architecture. Actual closed-loop bandwidth depends on the selected noise-gain setting, so use the manufacturer response curves rather than treating 1 MHz as the usable bandwidth for every feedback network.
Is MC3403PT suitable for single-supply applications?
Yes, the MC3403PT is designed for single-supply operation up to +36 V as well as dual-supply operation up to ±18 V. According to the manufacturer datasheet, single-supply use simplifies systems that cannot generate a negative rail. The input common-mode range and output swing must remain inside the linear operating region, so verify those limits for the signal amplitude and load.
What can replace the MC3403PT?
The MC3403PT can be replaced by a pin-compatible 14-pin TSSOP quad amplifier whose supply, bandwidth, bias-current, and output-swing ratings satisfy the design requirements. The closest same-family option identified is the STMicroelectronics MC3403DT, while the Texas Instruments MC3403PT offers the same MPN and TSSOP-14 format from another manufacturer. Confirm pin assignments and full electrical limits before substitution.
Is MC3403PT the same as TI MC3403PT?
The STMicroelectronics and Texas Instruments versions share the MC3403PT order code, but the manufacturer is part of the component identity and determines the governing datasheet, quality program, and procurement terms. According to the manufacturer documentation, both are four-amplifier devices associated with the MC3403 family. Validate pinout, electrical characteristics, qualification, and traceability against the specific manufacturer before treating them as interchangeable.
MC3403PT vs MC3403DT - which is better for a TSSOP design?
MC3403PT and MC3403DT are the same STMicroelectronics family in 14-pin TSSOP formats, with the order-code suffix differentiating the supplier packaging configuration rather than the core amplifier function. According to the manufacturer ordering information, engineers should compare the exact suffix, temperature range, shipment form, and lifecycle terms. Use the specific suffix datasheet ordering table to confirm a true production replacement.
When should I choose MC3403PT over a lower-bandwidth quad amplifier?
Choose the MC3403PT when a design needs four general-purpose amplifier channels, operation from a supply up to +36 V, and a 1 MHz gain-bandwidth product. According to the manufacturer datasheet, internal compensation and short-circuit-protected outputs simplify standard amplifier configurations. Choose a lower-bandwidth device only when its lower power and bandwidth requirements still meet the signal, noise, and load specifications.
Is MC3403PT suitable for industrial sensor amplification?
The MC3403PT is suitable for many low-frequency industrial sensor-amplification stages because it provides four channels, a 1 MHz gain-bandwidth product, and a maximum input bias current of 500 nA. According to the manufacturer datasheet, the input bias current and offset characteristics must be compared with the sensor source impedance. High-impedance sensors may require a lower-bias amplifier for better accuracy.
What design considerations apply when using MC3403PT?
Use short, direct feedback paths, provide local supply bypassing, and verify operation across the complete input-common-mode and output-swing limits. According to the manufacturer datasheet, each channel is internally compensated and has a short-circuit-protected Class AB output. Keep unused amplifier inputs tied to a defined potential near the signal reference, and follow the recommended operating and layout guidance to avoid oscillation.
How much power does the MC3403PT dissipate?
The MC3403PT dissipation depends on supply voltage, output swing, load current, and the aggregate current used by all four channels; therefore, no fixed dissipation can be assigned without operating conditions. According to the manufacturer datasheet, use the quiescent-current and output-current characteristics with the actual duty cycle to estimate loss. Then verify junction temperature against the package thermal data.
Is MC3403PT RoHS compliant?
The RoHS status for MC3403PT must be confirmed for the exact manufacturer order code and current product documentation. According to the manufacturer product and compliance materials, use the material-declaration or product-compliance record associated with the purchased suffix. XAIPART can route the request through the Request a Quote form on this page so the applicable declaration is matched to the intended supply source.
Where to buy MC3403PT online?
Use the Request a Quote form on this page to request MC3403PT availability, current lead time, order quantities, and commercial terms. The manufacturer documentation identifies MC3403PT as a four-circuit, 14-pin TSSOP operational amplifier, but stock and delivery conditions can change by region, date, and order quantity. Submit the required suffix and package quantity with the quote request to avoid ambiguity.
What is the price of MC3403PT?
The current MC3403PT commercial price is not stated in a fixed static value on this page because quotations can change with quantity, date, and supply channel. Use the Request a Quote form to obtain a current response for the exact MC3403PT suffix, package quantity, and shipment destination. Include any required automotive qualification or traceability requirements in the request.
What is the lead time for MC3403PT?
The current MC3403PT lead time depends on order quantity, inventory position, destination, and manufacturing schedule. According to the manufacturer documentation, MC3403PT is a production order code in the 14-pin TSSOP family. Use the Request a Quote form on this page to request the latest lead time and minimum-order quantity for the exact quantity and package format needed for your build.

Technische Referenzdaten für MC3403PT – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the STMicroelectronics MC3403PT when a compact four-channel bipolar amplifier is required for low-frequency signal conditioning, industrial control, audio preamplification, or general analog interfacing. Its 14-pin TSSOP footprint combines four 1 MHz amplifiers, internal compensation, short-circuit-protected outputs, single-supply operation to +36 V, and dual-supply operation to ±18 V. Select the STMicroelectronics MC3403DT when that same-family order code offers better lifecycle continuity or procurement alignment; it provides the same core function and package. Consider the Texas Instruments MC3403PT when its manufacturer-specific qualification, traceability, or supply channel is required, but review its governing datasheet rather than assuming every family-level rating is identical. For designs requiring substantially lower bias current, lower noise, rail-to-rail output, or greater bandwidth, a different amplifier family may be more appropriate even if another 14-pin package is physically available.

Vergleich mit Alternativen

Parameter Dieses Produkt MC3403DT MC3403PT
Manufacturer STMicroelectronics STMicroelectronics Texas Instruments
Package 14-pin TSSOP 14-pin TSSOP - same 14-pin TSSOP - same
Number of Amplifiers 4 amplifiers 4 amplifiers 4 amplifiers
Amplifier Architecture Bipolar Bipolar Bipolar
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz
Single-Supply Maximum +36 V +36 V +36 V
Dual-Supply Maximum ±18 V ±18 V ±18 V
Maximum Input Bias Current 500 nA 500 nA 500 nA
Compensation Internally compensated Internally compensated Internally compensated
Output Protection Short-circuit protected Short-circuit protected Short-circuit protected

Wichtigste Unterscheidungsmerkmale

  • Combines four general-purpose amplifiers with broad supply capability (vs. MC3403DT)
  • Broad single- and dual-supply operating range (vs. MC3403PT)
  • Simplified amplifier implementation (vs. MC3403DT)

Designhinweise

Place the input, output, feedback, and supply-bypass connections directly around the TSSOP-14 pins. Keep each feedback component close to its amplifier channel and avoid routing sensitive input traces beneath or parallel to power and digital switching paths. Use a continuous ground plane, short return paths, and a low-impedance bypass capacitor at the supply pins. Verify the final layout against the manufacturer pin and application guidance.

Do not assume that a matching TSSOP-14 footprint guarantees functional interchangeability. Compare pin assignments, input common-mode range, output swing, slew rate, offset voltage, input bias current, output-current capability, and stability with the selected load. The MC3403PT uses dual supply pins at pins 4 and 11, so maintain suitable connections for single- or dual-supply operation and confirm the unused-channel state in the final schematic.

Calculate dissipation from the actual total supply current, output swing, load, and duty cycle of all four channels. A single high-load channel can dominate thermal stress even when the other three are lightly loaded. Use the manufacturer quiescent-current, output-current, and thermal-resistance data for the selected package and test temperature. Add copper area or other thermal relief when the calculated operating temperature exceeds the design target.

The 1 MHz gain-bandwidth product is appropriate for low-frequency and general-purpose amplification rather than wideband signal conditioning. Keep closed-loop bandwidth and noise gain within the stable operating region, especially with capacitive loads. Place feedback components to minimize parasitic capacitance, and evaluate source impedance against the 500 nA maximum input bias current. A low-bias alternative may be preferable when driving exceptionally high source impedances.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration was identified for the exact order code. Confirm the current manufacturer compliance record before production release.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

mc3403p datasheet MC3403PT datasheet MC3403PT pinout MC3403PT specifications MC3403PT equivalent MC3403PT replacement MC3403PT cross reference MC3403PT vs MC3403DT MC3403PT TSSOP-14 footprint STMicroelectronics MC3403PT MC3403PT quad operational amplifier MC3403PT price

Verwandte Bauteile & Begriffe

STMicroelectronics MC3403PT MC3403DT Texas Instruments MC3403DR operational amplifier quad amplifier analog amplifier IC signal-processing semiconductor bipolar operational amplifier low-dropout regulator gain-bandwidth product input bias current input offset voltage common-mode voltage slew rate Class AB output stage internal compensation 14-pin TSSOP TSSOP package family surface-mount package industrial sensor conditioning audio preamplification active filtering single-supply operation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen