MC3403PT - Quad Low-Power Op Amp | STMicroelectronics
Артикул: MC3403PT ✓ АктивенMC3403PT Обзор
An operational amplifier is an analog integrated circuit that uses high-gain feedback to amplify the difference between two input voltages. Within the broader semiconductor hierarchy, the MC3403PT belongs to the operational-amplifier family, which falls under analog amplifier ICs and signal-processing semiconductors. The quad configuration places four independent amplifiers in one package, reducing board area in designs requiring multiple buffered or gain-stage channels.
The principal features of the MC3403PT include a maximum input bias current of 500 nA, internal compensation, short-circuit-protected outputs, and a minimum Class AB output stage for reduced crossover distortion. Its 1 MHz gain-bandwidth product supports general-purpose amplification at low and moderate frequencies. Single-supply operation up to +36 V is especially useful when the signal source and load share a positive reference without a negative rail.
The bipolar input stage supports operation from dual supplies of ±18 V or a single supply up to +36 V. Internal compensation simplifies circuit construction because separate external compensation components are not required for ordinary closed-loop amplifier use. Four independent channels can also be configured as voltage followers, non-inverting or inverting amplifiers, differential stages, comparators in suitable circuits, or general analog signal-conditioning elements.
Typical uses include low-frequency sensor amplification, industrial control loops, audio preamplification, active filtering, transducers, sample-and-hold stages, and general-purpose analog boards. The quad package is particularly useful when a design needs several channels with the same supply architecture. Engineers should also evaluate output swing, slew rate, input common-mode range, and load capability against their particular signal chain.
For layout, place input and output paths away from high-current switching nodes and connect the supply pins to a low-impedance bypass network. Stable feedback networks and properly grounded unused channels help prevent oscillation or unintended signal coupling. Use the manufacturer pin table and electrical-characteristics curves to verify the final operating points.
This product page combines manufacturer and distributor technical information, package and pin details, lifecycle-oriented sourcing guidance, application analysis, and validated drop-in alternatives. It also highlights the differences engineers should evaluate before replacing the MC3403PT on an existing 14-pin TSSOP layout.
Аналоги без доработки для MC3403PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC3403PT (тот же форм-фактор и посадочное место) — отличается по Package.
MC3403DT
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →MC3403PT
✅ Прямая заменаУточнить цену
Открыть даташит →MC3403PT Максимальные параметры и электрические характеристики
| Amplifier Type | General-purpose bipolar operational amplifier |
| Number of Circuits | 4 circuits |
| Number of Amplifiers | 4 amplifiers |
| Gain-Bandwidth Product | 1 MHz |
| Single-Supply Operating Range | Up to +36 V |
| Dual-Supply Operating Range | Up to ±18 V |
| Maximum Input Bias Current | 500 nA |
| Compensation | Internally compensated |
| Output Stage | Class AB |
| Output Protection | Short-circuit protected |
| Корпус | 14-pin TSSOP |
| Тип монтажа | Surface mount |
| Диапазон рабочих температур | -25 °C to +85 °C |
Конфигурация выводов MC3403PT
| Контакт 1 | OUT1 — Amplifier 1 output |
| Контакт 2 | IN1- — Amplifier 1 inverting input |
| Контакт 3 | IN1+ — Amplifier 1 non-inverting input |
| Контакт 4 | V- — Negative supply connection |
| Контакт 5 | IN2+ — Amplifier 2 non-inverting input |
| Контакт 6 | IN2- — Amplifier 2 inverting input |
| Контакт 7 | OUT2 — Amplifier 2 output |
| Контакт 8 | OUT3 — Amplifier 3 output |
| Контакт 9 | IN3- — Amplifier 3 inverting input |
| Контакт 10 | IN3+ — Amplifier 3 non-inverting input |
| Контакт 11 | V+ — Positive supply connection |
| Контакт 12 | IN4+ — Amplifier 4 non-inverting input |
| Контакт 13 | IN4- — Amplifier 4 inverting input |
| Контакт 14 | OUT4 — Amplifier 4 output |
Типичное применение
MC3403PT подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Audio Preamplification, Active Filtering and Control Loops, Transducer and Instrumentation Amplification, General-Purpose Analog Interface Boards, Power-Supply Feedback and Monitoring.
Industrial Sensor Signal Conditioning
The STMicroelectronics MC3403PT fits low-frequency industrial sensor-conditioning circuits requiring several amplifier channels on one supply. Its four 1 MHz amplifiers can amplify sensor outputs, buffer inputs, and form active-filter stages without adding four separate packages. The 500 nA maximum input bias current is useful with moderate source impedances, although very high-impedance sensors may require lower-bias devices. Check input offset voltage, common-mode range, and output swing under the actual 36 V maximum supply condition before finalizing the front end.
Рекомендуется
Audio Preamplification
The MC3403PT can implement low-frequency audio preamplifier and buffering stages where a compact four-channel package is advantageous. Its 1 MHz gain-bandwidth product is suitable for common audio control paths, while the Class AB output stage is designed to minimize crossover distortion. The four channels can serve as microphone preamplifier, tone-control, headphone-driver-adjacent, and monitoring stages. Confirm output-current capability, slew rate, input-noise performance, and load stability against the selected audio bandwidth before using it near the output stage.
Рекомендуется
Active Filtering and Control Loops
The four internally compensated channels in the MC3403PT can implement active filters, integrators, error amplifiers, and industrial control-loop functions. A 1 MHz gain-bandwidth product provides useful bandwidth for slow closed-loop systems, while short-circuit-protected outputs support dependable integration into regulated control hardware. Feedback-component tolerances and amplifier offset directly influence filter accuracy, so calculate those effects before production. Also confirm that the selected loop gain remains compatible with the device's open-loop response and phase margin.
Рекомендуется
Transducer and Instrumentation Amplification
The MC3403PT is applicable to low-frequency instrumentation paths that need multiple buffered channels for transducers, bridges, or test fixtures. Its maximum input bias current of 500 nA is manageable for many medium-impedance sources, and operation from a single supply up to +36 V simplifies higher-voltage industrial systems. Instrumentation accuracy still depends on input offset, input voltage and current noise, source resistance, and common-mode rejection. Use the manufacturer characteristics and layout recommendations to establish the achievable measurement precision.
Рекомендуется
General-Purpose Analog Interface Boards
MC3403PT is suitable for educational, prototyping, and general analog interface boards that require four general-purpose amplifier channels. The internally compensated devices simplify standard non-inverting, inverting, voltage-follower, and comparator-style configurations. A single 14-pin TSSOP reduces board area while dual- or single-supply flexibility permits operation across multiple laboratory and industrial voltages. Designers should still provide bypassing, maintain short feedback routes, ground unused channels appropriately, and verify the output stage against the intended load.
Рекомендуется
Power-Supply Feedback and Monitoring
The MC3403PT can support low-frequency feedback, monitoring, and fault-detection functions in linear power-supply designs. Four independent channels allow separate use for output-voltage sensing, current-command buffering, and protection logic interfaces. Its broad single-supply capability can accommodate industrial rails up to +36 V, subject to the applicable input and output limits. When the amplifier drives a power stage, check phase margin and compensation carefully; when it monitors a high-voltage node, use an appropriate front-end network rather than exceeding the input ratings.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC3403PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC3403DT | MC3403PT |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | Texas Instruments |
| Package | 14-pin TSSOP | 14-pin TSSOP - same | 14-pin TSSOP - same |
| Number of Amplifiers | 4 amplifiers | 4 amplifiers | 4 amplifiers |
| Amplifier Architecture | Bipolar | Bipolar | Bipolar |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz |
| Single-Supply Maximum | +36 V | +36 V | +36 V |
| Dual-Supply Maximum | ±18 V | ±18 V | ±18 V |
| Maximum Input Bias Current | 500 nA | 500 nA | 500 nA |
| Compensation | Internally compensated | Internally compensated | Internally compensated |
| Output Protection | Short-circuit protected | Short-circuit protected | Short-circuit protected |
Ключевые отличия
- Combines four general-purpose amplifiers with broad supply capability (против MC3403DT)
- Broad single- and dual-supply operating range (против MC3403PT)
- Simplified amplifier implementation (против MC3403DT)
Заметки по проектированию
Place the input, output, feedback, and supply-bypass connections directly around the TSSOP-14 pins. Keep each feedback component close to its amplifier channel and avoid routing sensitive input traces beneath or parallel to power and digital switching paths. Use a continuous ground plane, short return paths, and a low-impedance bypass capacitor at the supply pins. Verify the final layout against the manufacturer pin and application guidance.
Do not assume that a matching TSSOP-14 footprint guarantees functional interchangeability. Compare pin assignments, input common-mode range, output swing, slew rate, offset voltage, input bias current, output-current capability, and stability with the selected load. The MC3403PT uses dual supply pins at pins 4 and 11, so maintain suitable connections for single- or dual-supply operation and confirm the unused-channel state in the final schematic.
Calculate dissipation from the actual total supply current, output swing, load, and duty cycle of all four channels. A single high-load channel can dominate thermal stress even when the other three are lightly loaded. Use the manufacturer quiescent-current, output-current, and thermal-resistance data for the selected package and test temperature. Add copper area or other thermal relief when the calculated operating temperature exceeds the design target.
The 1 MHz gain-bandwidth product is appropriate for low-frequency and general-purpose amplification rather than wideband signal conditioning. Keep closed-loop bandwidth and noise gain within the stable operating region, especially with capacitive loads. Place feedback components to minimize parasitic capacitance, and evaluate source impedance against the 500 nA maximum input bias current. A low-bias alternative may be preferable when driving exceptionally high source impedances.
Информация о соответствии
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration was identified for the exact order code. Confirm the current manufacturer compliance record before production release.