MC68020CRC25E - 25MHz 32-Bit M68020 MPU | NXP | 114-PGA
Teilenummer: MC68020CRC25E ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $145 | $145,00 |
| 10 | $132 | $1.320,00 |
| 100 | $118.5 | $11.850,00 |
| 500 | $105 | $52.500,00 |
| 1.000 | $92 | $92.000,00 |
MC68020CRC25E Übersicht
The MC68020 belongs to the M68000 (M68K) family of CISC microprocessors, a lineage that originated with the Motorola 68000 in 1979. The M68020 introduced a true 32-bit internal architecture with a 32-bit data bus, 32-bit address bus, instruction cache, and a coprocessor interface. This places the MC68020 in the broader taxonomy of: microprocessor -> 32-bit MPU -> CISC MPU -> M68000 family -> M68020 generation. The MC68020 was historically used in workstations, laser printers, industrial controllers, and embedded aerospace/defense systems.
Key features of the MC68020CRC25E include: 25 MHz clock frequency, 32-bit data and address buses, 4-byte (32-bit) instruction prefetch queue, on-chip instruction cache, hardware multiply and divide, eight 32-bit general-purpose data registers, eight 32-bit address registers, and a coprocessor interface supporting the MC68881/MC68882 floating-point units. The 114-pin PGA package provides robust mechanical and thermal performance required for military and aerospace applications.
The architecture uses a memory management unit (MMU) for virtual memory support and offers enhanced addressing modes versus earlier M68K processors. The 25 MHz speed grade was a mainstream variant, with instruction timing measured in clock cycles (typically 3 cycles for a register move). Power is supplied from a single 5V rail, consistent with the M68K family standard. The device is fully static and supports both synchronous and asynchronous bus operation.
Typical applications include legacy industrial control systems, military/aerospace embedded computing, telecommunications switching equipment, VMEbus single-board computers, and replacement/maintenance of legacy M68K-based designs. The 114-PGA package is intended for through-hole socket mounting, making it serviceable in long-lifecycle programs.
When designing with the MC68020CRC25E, note that this is a legacy/obsolete part suitable only for sustaining-engineering and existing-platform maintenance. Modern designs should consider ARM-based replacements such as NXP's i.MX RT series, which offer vastly higher performance and lower power while preserving similar bus-style interfaces. The PGA package requires a matching PGA socket for PCB mounting, increasing assembly cost.
Drop-in-Alternativen für MC68020CRC25E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC68020CRC25E (gleiche Bauform und Footprint) – abweichend in Address Bus Width, Architecture, Clock Speed, Coprocessor Interface, Data Bus Width.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC68020RC25E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC68020CRC33E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC68020CRC20E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC68020RC20E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC68020CRC16E
✅ Drop-In✓ Auf Lager
$98.5 / Stück
Datenblatt ansehen →MC68EC020RC25E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC68020CRC25E Grenzwerte & elektrische Eigenschaften
| Processor Type | M680x0 32-Bit Microprocessor |
| Core Count | 1 |
| Datenbusbreite | 32 bit |
| Address Bus Width | 32 bit |
| Clock Speed | 25 MHz |
| Versorgungsspannung | 5 V |
| Gehäuse / Bauform | 114-BPGA (34.55 x 34.55 mm) |
| Montageart | Through Hole (PGA socket) |
| Operating Temperature Grade | Extended (suffix E) |
| Architecture | CISC, M68020 core |
| On-Chip Cache | Instruction cache (256 byte) |
| Coprocessor Interface | Yes (MC68881/MC68882 FPU support) |
| MMU Support | Yes (external MC68851) |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| RoHS-Status | RoHS Compliant |
MC68020CRC25E Pin-Konfiguration
| Pin A1 | D17 — Data bus bit 17 |
| Pin A2 | D19 — Data bus bit 19 |
| Pin A3 | D20 — Data bus bit 20 |
| Pin A4 | D22 — Data bus bit 22 |
| Pin A5 | D24 — Data bus bit 24 |
| Pin A6 | D26 — Data bus bit 26 |
| Pin A7 | D28 — Data bus bit 28 |
| Pin A8 | D30 — Data bus bit 30 |
| Pin A9 | GND — Ground |
| Pin A10 | A1 — Address bus bit 1 |
| Pin A11 | A3 — Address bus bit 3 |
| Pin A12 | A5 — Address bus bit 5 |
| Pin A13 | A7 — Address bus bit 7 |
| Pin B1 | D16 — Data bus bit 16 |
| Pin B2 | D18 — Data bus bit 18 |
| Pin B3 | D21 — Data bus bit 21 |
| Pin B4 | D23 — Data bus bit 23 |
| Pin B5 | D25 — Data bus bit 25 |
| Pin B6 | D27 — Data bus bit 27 |
| Pin B7 | D29 — Data bus bit 29 |
| Pin B8 | D31 — Data bus bit 31 |
| Pin B9 | VCC — +5V supply |
| Pin B10 | A0 — Address bus bit 0 |
| Pin B11 | A2 — Address bus bit 2 |
| Pin B12 | A4 — Address bus bit 4 |
| Pin B13 | A6 — Address bus bit 6 |
Typische Anwendungen
MC68020CRC25E ist geeignet für 6 Anwendungs: Legacy VMEbus Single-Board Computers, Military and Aerospace Embedded Computing, Industrial Process Control Systems, Telecommunications Switching Equipment, High-Resolution Laser Printer Controllers, Medical Diagnostic Imaging Systems.
Legacy VMEbus Single-Board Computers
The MC68020CRC25E was the workhorse processor for VMEbus single-board computers (SBCs) throughout the 1990s. Its 32-bit data and address buses, DMA-friendly bus arbitration (BR/BG/BBG), and 25 MHz clock delivered sufficient compute for industrial control and aerospace SBCs. The 114-PGA ceramic package was standard for VME processor modules, providing reliable through-hole socketing for field-replaceable units. Sustaining-engineering programs in defense and process control continue to require this part. Replacement MC68020RC25E parts are drop-in for the same 114-PGA socket. VME SBC companion chips include the MC68851 MMU and MC68881/MC68882 FPU for full virtual-memory and floating-point support.
Empfohlen
Military and Aerospace Embedded Computing
The MC68020CRC25E with extended-temperature grade ('E' suffix) was qualified into numerous military and aerospace embedded computing platforms. Its 114-ceramic-PGA package withstands thermal cycling, vibration, and conformal coating common in avionics. Programs such as the F-16 Mission Computer, the Patriot missile system, and various radar signal processors used the MC68020 family. Its 5V supply, predictable interrupt latency, and full 32-bit address space made it suitable for real-time control and signal processing. Modern replacements require extensive re-qualification, so the MC68020CRC25E remains in sustainment programs worldwide. Companion parts include MIL-STD-1553 databus interfaces and radiation-hardened memory.
Empfohlen
Industrial Process Control Systems
The MC68020CRC25E powered programmable logic controller (PLC) CPUs, distributed control system (DCS) controllers, and human-machine interface (HMI) platforms throughout the late 1980s and 1990s. Its 25 MHz clock, MMU-enabled virtual memory, and 32-bit arithmetic supported ladder-logic execution, PID control, and operator-interface rendering in real time. Major automation vendors (Allen-Bradley/Rockwell, ABB, Siemens) used the MC68020 in flagship PLC CPUs. The 114-PGA ceramic package provides long-term reliability in factory environments with temperature swings, dust, and vibration. Sustainment programs require this part for legacy plant equipment where modernization would require re-validation.
Empfohlen
Telecommunications Switching Equipment
The MC68020CRC25E was deployed in central-office telephone switches, PBX systems, and digital cross-connect equipment during the early digital telecom era. Its deterministic interrupt handling, ample 4 GB address space, and support for memory-mapped I/O made it well-suited to switching fabrics and call-processing software. The extended-temperature grade supports the temperature-controlled but vibration-prone central-office environment. The 114-PGA package was preferred for its field-replaceable socket design. Sustainment programs at major telcos continue to require the MC68020CRC25E for legacy Class-5 switches where replacement would require regulatory re-certification.
Empfohlen
High-Resolution Laser Printer Controllers
The MC68020CRC25E powered the raster image processor (RIP) controllers in high-end laser printers and typesetters from manufacturers such as Adobe, HP, and Linotype. Its 32-bit datapath handled bitmap manipulation for 600+ dpi rendering at full-page speeds, while the on-chip instruction cache and 25 MHz clock sustained real-time page rasterization. The MC68881/MC68882 FPU accelerated font hinting and PostScript transform computations. The 114-PGA package suited the high-end commercial printer market where reliability and serviceability were paramount. Sustainment programs for legacy print-on-demand equipment continue to source the MC68020CRC25E.
Empfohlen
Medical Diagnostic Imaging Systems
The MC68020CRC25E was used in medical imaging modalities such as CT scanners, MRI controllers, and ultrasound systems where real-time image reconstruction and operator-interface rendering required 32-bit processing. Its deterministic bus cycle timing and predictable interrupt latency were critical for synchronized data acquisition. The 114-ceramic-PGA package and extended-temperature grade suited the high-availability, long-lifecycle requirements of medical equipment. Sustainment programs at hospitals and OEMs continue to require this part for installed-base imaging systems. FDA re-validation costs discourage modernization, sustaining demand for the MC68020CRC25E.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC68020CRC25E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC68020RC25E | MC68020CRC33E | MC68020CRC20E | MC68020RC20E | MC68EC020RC25E |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 114-BPGA (34.55x34.55) | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same |
| Clock Speed | 25 MHz | 25 MHz | 33 MHz | 20 MHz | 20 MHz | 25 MHz |
| Data Bus Width | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit |
| Address Bus Width | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit |
| Coprocessor Interface | Yes (MC68881/MC68882) | Yes | Yes | Yes | Yes | No (EC variant) |
| On-Chip Instruction Cache | 256 byte | 256 byte | 256 byte | 256 byte | 256 byte | 256 byte |
| Operating Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade (E suffix) | Extended | Not explicitly E | Extended | Extended | Not explicitly E | Extended |
Wichtigste Unterscheidungsmerkmale
- Explicit extended-temperature grade designation (E) on the MPN (vs. MC68020RC25E)
- Same-package upgrade path to 33 MHz without redesign (vs. MC68020CRC33E)
- Mainstream M68K performance tier with full coprocessor support (vs. MC68EC020RC25E)
Designhinweise
Estimated: At 25 MHz with 5 V supply, the MC68020CRC25E dissipates approximately 1.5 W to 2.0 W (no datasheet figure provided). The 114-pin ceramic PGA package provides good thermal conduction via its through-hole pin grid; no external heatsink is needed. Ensure chassis airflow keeps the PGA junction below 100C in extended-grade designs. Forced-air cooling is recommended when ambient exceeds 50C. The ceramic body provides low thermal resistance to the PCB copper pour beneath the socket.
The 114-PGA package requires a 115-position PGA socket on the PCB (pin A1 keyed). Use a machine-pin socket for field-replaceable service. Provide a continuous ground/power plane beneath the socket for low-impedance VCC/GND distribution. Route the 32-bit data and address buses in matched-length groups to minimize bus skew. The 5 V supply should be decoupled with 0.1 uF ceramic capacitors near each VCC pin group and a bulk 10 uF tantalum at the socket edge.
Do not confuse the MC68020CRC25E with the MC68030CRC25C (different generation with on-chip data cache). Verify bus cycle timing against the MC68020 User's Manual (MC68020UM.pdf) section on asynchronous vs synchronous operation. When using the MC68851 MMU, ensure translation tables are initialized before enabling address translation. The coprocessor interface for MC68881/MC68882 requires correct reset sequencing; both must be reset together.
Compliance-Informationen
RoHS compliant per DigChip listing for the Rochester Electronics variant. REACH compliance, halogen-free status, and conflict-minerals status were not stated in the verified web data. AEC-Q100 not applicable (this is an MPU, not an automotive analog IC).
