MC68020CRC25E - 25MHz 32-Bit M68020 MPU | NXP | 114-PGA
部品番号: MC68020CRC25E ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $145 | $145.00 |
| 10 | $132 | $1,320.00 |
| 100 | $118.5 | $11,850.00 |
| 500 | $105 | $52,500.00 |
| 1,000 | $92 | $92,000.00 |
MC68020CRC25E 概要
The MC68020 belongs to the M68000 (M68K) family of CISC microprocessors, a lineage that originated with the Motorola 68000 in 1979. The M68020 introduced a true 32-bit internal architecture with a 32-bit data bus, 32-bit address bus, instruction cache, and a coprocessor interface. This places the MC68020 in the broader taxonomy of: microprocessor -> 32-bit MPU -> CISC MPU -> M68000 family -> M68020 generation. The MC68020 was historically used in workstations, laser printers, industrial controllers, and embedded aerospace/defense systems.
Key features of the MC68020CRC25E include: 25 MHz clock frequency, 32-bit data and address buses, 4-byte (32-bit) instruction prefetch queue, on-chip instruction cache, hardware multiply and divide, eight 32-bit general-purpose data registers, eight 32-bit address registers, and a coprocessor interface supporting the MC68881/MC68882 floating-point units. The 114-pin PGA package provides robust mechanical and thermal performance required for military and aerospace applications.
The architecture uses a memory management unit (MMU) for virtual memory support and offers enhanced addressing modes versus earlier M68K processors. The 25 MHz speed grade was a mainstream variant, with instruction timing measured in clock cycles (typically 3 cycles for a register move). Power is supplied from a single 5V rail, consistent with the M68K family standard. The device is fully static and supports both synchronous and asynchronous bus operation.
Typical applications include legacy industrial control systems, military/aerospace embedded computing, telecommunications switching equipment, VMEbus single-board computers, and replacement/maintenance of legacy M68K-based designs. The 114-PGA package is intended for through-hole socket mounting, making it serviceable in long-lifecycle programs.
When designing with the MC68020CRC25E, note that this is a legacy/obsolete part suitable only for sustaining-engineering and existing-platform maintenance. Modern designs should consider ARM-based replacements such as NXP's i.MX RT series, which offer vastly higher performance and lower power while preserving similar bus-style interfaces. The PGA package requires a matching PGA socket for PCB mounting, increasing assembly cost.
ドロップイン代替品: MC68020CRC25E — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC68020CRC25E （同一形状・フットプリント） — 相違点: Address Bus Width, Architecture, Clock Speed, Coprocessor Interface, Data Bus Width.
クイック比較ツール — 並列比較する代替部品を選択:
MC68020RC25E
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68020CRC33E
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68020CRC20E
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68020RC20E
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68020CRC16E
✅ ドロップイン✓ 在庫あり
$98.5 / 個
データシートを見る →MC68EC020RC25E
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68020CRC25E 最大定格＆電気的特性
| Processor Type | M680x0 32-Bit Microprocessor |
| Core Count | 1 |
| データバス幅 | 32 bit |
| Address Bus Width | 32 bit |
| Clock Speed | 25 MHz |
| 電源電圧 | 5 V |
| パッケージ / ケース | 114-BPGA (34.55 x 34.55 mm) |
| 実装タイプ | Through Hole (PGA socket) |
| Operating Temperature Grade | Extended (suffix E) |
| Architecture | CISC, M68020 core |
| On-Chip Cache | Instruction cache (256 byte) |
| Coprocessor Interface | Yes (MC68881/MC68882 FPU support) |
| MMU Support | Yes (external MC68851) |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| RoHS ステータス | RoHS Compliant |
MC68020CRC25E ピン構成
| ピン A1 | D17 — Data bus bit 17 |
| ピン A2 | D19 — Data bus bit 19 |
| ピン A3 | D20 — Data bus bit 20 |
| ピン A4 | D22 — Data bus bit 22 |
| ピン A5 | D24 — Data bus bit 24 |
| ピン A6 | D26 — Data bus bit 26 |
| ピン A7 | D28 — Data bus bit 28 |
| ピン A8 | D30 — Data bus bit 30 |
| ピン A9 | GND — Ground |
| ピン A10 | A1 — Address bus bit 1 |
| ピン A11 | A3 — Address bus bit 3 |
| ピン A12 | A5 — Address bus bit 5 |
| ピン A13 | A7 — Address bus bit 7 |
| ピン B1 | D16 — Data bus bit 16 |
| ピン B2 | D18 — Data bus bit 18 |
| ピン B3 | D21 — Data bus bit 21 |
| ピン B4 | D23 — Data bus bit 23 |
| ピン B5 | D25 — Data bus bit 25 |
| ピン B6 | D27 — Data bus bit 27 |
| ピン B7 | D29 — Data bus bit 29 |
| ピン B8 | D31 — Data bus bit 31 |
| ピン B9 | VCC — +5V supply |
| ピン B10 | A0 — Address bus bit 0 |
| ピン B11 | A2 — Address bus bit 2 |
| ピン B12 | A4 — Address bus bit 4 |
| ピン B13 | A6 — Address bus bit 6 |
主な用途
MC68020CRC25E の用途: 6 件s: Legacy VMEbus Single-Board Computers, Military and Aerospace Embedded Computing, Industrial Process Control Systems, Telecommunications Switching Equipment, High-Resolution Laser Printer Controllers, Medical Diagnostic Imaging Systems.
Legacy VMEbus Single-Board Computers
The MC68020CRC25E was the workhorse processor for VMEbus single-board computers (SBCs) throughout the 1990s. Its 32-bit data and address buses, DMA-friendly bus arbitration (BR/BG/BBG), and 25 MHz clock delivered sufficient compute for industrial control and aerospace SBCs. The 114-PGA ceramic package was standard for VME processor modules, providing reliable through-hole socketing for field-replaceable units. Sustaining-engineering programs in defense and process control continue to require this part. Replacement MC68020RC25E parts are drop-in for the same 114-PGA socket. VME SBC companion chips include the MC68851 MMU and MC68881/MC68882 FPU for full virtual-memory and floating-point support.
おすすめ
Military and Aerospace Embedded Computing
The MC68020CRC25E with extended-temperature grade ('E' suffix) was qualified into numerous military and aerospace embedded computing platforms. Its 114-ceramic-PGA package withstands thermal cycling, vibration, and conformal coating common in avionics. Programs such as the F-16 Mission Computer, the Patriot missile system, and various radar signal processors used the MC68020 family. Its 5V supply, predictable interrupt latency, and full 32-bit address space made it suitable for real-time control and signal processing. Modern replacements require extensive re-qualification, so the MC68020CRC25E remains in sustainment programs worldwide. Companion parts include MIL-STD-1553 databus interfaces and radiation-hardened memory.
おすすめ
Industrial Process Control Systems
The MC68020CRC25E powered programmable logic controller (PLC) CPUs, distributed control system (DCS) controllers, and human-machine interface (HMI) platforms throughout the late 1980s and 1990s. Its 25 MHz clock, MMU-enabled virtual memory, and 32-bit arithmetic supported ladder-logic execution, PID control, and operator-interface rendering in real time. Major automation vendors (Allen-Bradley/Rockwell, ABB, Siemens) used the MC68020 in flagship PLC CPUs. The 114-PGA ceramic package provides long-term reliability in factory environments with temperature swings, dust, and vibration. Sustainment programs require this part for legacy plant equipment where modernization would require re-validation.
おすすめ
Telecommunications Switching Equipment
The MC68020CRC25E was deployed in central-office telephone switches, PBX systems, and digital cross-connect equipment during the early digital telecom era. Its deterministic interrupt handling, ample 4 GB address space, and support for memory-mapped I/O made it well-suited to switching fabrics and call-processing software. The extended-temperature grade supports the temperature-controlled but vibration-prone central-office environment. The 114-PGA package was preferred for its field-replaceable socket design. Sustainment programs at major telcos continue to require the MC68020CRC25E for legacy Class-5 switches where replacement would require regulatory re-certification.
おすすめ
High-Resolution Laser Printer Controllers
The MC68020CRC25E powered the raster image processor (RIP) controllers in high-end laser printers and typesetters from manufacturers such as Adobe, HP, and Linotype. Its 32-bit datapath handled bitmap manipulation for 600+ dpi rendering at full-page speeds, while the on-chip instruction cache and 25 MHz clock sustained real-time page rasterization. The MC68881/MC68882 FPU accelerated font hinting and PostScript transform computations. The 114-PGA package suited the high-end commercial printer market where reliability and serviceability were paramount. Sustainment programs for legacy print-on-demand equipment continue to source the MC68020CRC25E.
おすすめ
Medical Diagnostic Imaging Systems
The MC68020CRC25E was used in medical imaging modalities such as CT scanners, MRI controllers, and ultrasound systems where real-time image reconstruction and operator-interface rendering required 32-bit processing. Its deterministic bus cycle timing and predictable interrupt latency were critical for synchronized data acquisition. The 114-ceramic-PGA package and extended-temperature grade suited the high-availability, long-lifecycle requirements of medical equipment. Sustainment programs at hospitals and OEMs continue to require this part for installed-base imaging systems. FDA re-validation costs discourage modernization, sustaining demand for the MC68020CRC25E.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC68020CRC25E — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC68020RC25E | MC68020CRC33E | MC68020CRC20E | MC68020RC20E | MC68EC020RC25E |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 114-BPGA (34.55x34.55) | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same | 114-BPGA (34.55x34.55) - same |
| Clock Speed | 25 MHz | 25 MHz | 33 MHz | 20 MHz | 20 MHz | 25 MHz |
| Data Bus Width | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit |
| Address Bus Width | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit |
| Coprocessor Interface | Yes (MC68881/MC68882) | Yes | Yes | Yes | Yes | No (EC variant) |
| On-Chip Instruction Cache | 256 byte | 256 byte | 256 byte | 256 byte | 256 byte | 256 byte |
| Operating Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade (E suffix) | Extended | Not explicitly E | Extended | Extended | Not explicitly E | Extended |
主な差別化要因
- Explicit extended-temperature grade designation (E) on the MPN （vs MC68020RC25E)
- Same-package upgrade path to 33 MHz without redesign （vs MC68020CRC33E)
- Mainstream M68K performance tier with full coprocessor support （vs MC68EC020RC25E)
設計ノート
Estimated: At 25 MHz with 5 V supply, the MC68020CRC25E dissipates approximately 1.5 W to 2.0 W (no datasheet figure provided). The 114-pin ceramic PGA package provides good thermal conduction via its through-hole pin grid; no external heatsink is needed. Ensure chassis airflow keeps the PGA junction below 100C in extended-grade designs. Forced-air cooling is recommended when ambient exceeds 50C. The ceramic body provides low thermal resistance to the PCB copper pour beneath the socket.
The 114-PGA package requires a 115-position PGA socket on the PCB (pin A1 keyed). Use a machine-pin socket for field-replaceable service. Provide a continuous ground/power plane beneath the socket for low-impedance VCC/GND distribution. Route the 32-bit data and address buses in matched-length groups to minimize bus skew. The 5 V supply should be decoupled with 0.1 uF ceramic capacitors near each VCC pin group and a bulk 10 uF tantalum at the socket edge.
Do not confuse the MC68020CRC25E with the MC68030CRC25C (different generation with on-chip data cache). Verify bus cycle timing against the MC68020 User's Manual (MC68020UM.pdf) section on asynchronous vs synchronous operation. When using the MC68851 MMU, ensure translation tables are initialized before enabling address translation. The coprocessor interface for MC68881/MC68882 requires correct reset sequencing; both must be reset together.
コンプライアンス情報
RoHS compliant per DigChip listing for the Rochester Electronics variant. REACH compliance, halogen-free status, and conflict-minerals status were not stated in the verified web data. AEC-Q100 not applicable (this is an MPU, not an automotive analog IC).
