NXP Semiconductors

MC9S08DV96CLL - 8-Bit 40MHz 96KB Flash MCU | NXP

Teilenummer: MC9S08DV96CLL ✓ Aktiv
100-LQFP (14 mm x 14 mm) Package 40 MHz Speed Flash Memory
MOQ: 1 |

MC9S08DV96CLL Übersicht

NXP Semiconductors MC9S08DV96CLL is an 8-bit S08 microcontroller with a 40 MHz operating frequency, 96 KB of embedded flash memory, and a 100-lead LQFP package measuring 14 mm by 14 mm. The device combines a compact embedded-processing platform with 96K x 8 flash organization in a surface-mount package suited to embedded control designs.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripheral functions onto one chip. Within the broader electronics hierarchy, the MC9S08DV96CLL belongs to the 8-bit microcontroller class, which sits under embedded processors and ultimately forms part of a complete embedded-control system. This integration reduces the number of external components required for basic control, measurement, and communication tasks.

The principal published characteristics are an 8-bit architecture, 40 MHz maximum operating frequency, and 96 KB of embedded flash. The 100-LQFP package provides 100 electrical leads for power, ground, input/output, communications, timing, and control functions. Its 14 mm by 14 mm body is larger than compact leadless packages, which can make assembly and prototype inspection easier while providing numerous externally accessible connections.

The S08 architecture is intended for embedded applications where an 8-bit processor, dedicated program storage, and integrated peripherals offer an effective balance of capability and design simplicity. The 40 MHz clock rating supports higher-rate control-loop and signal-processing tasks than a basic low-speed microcontroller, while the 96 KB flash allocation provides substantially more program space than small 8-bit controllers. Detailed RAM, EEPROM, peripheral, voltage, and environmental limits must be confirmed in the NXP device documentation before schematic release.

Typical design uses include industrial equipment, appliance controllers, motor-control modules, sensing instruments, and compact embedded control boards. In these systems, the flash memory stores application firmware and configuration routines, while the 100-lead package allows external sensors, actuators, communications circuitry, and power-management components to connect to the microcontroller. Firmware selection should account for interrupt latency, peripheral mapping, memory endurance, and the required control-loop bandwidth.

PCB implementation should follow the NXP pin-assignment and layout guidance rather than assigning the 100 leads solely from the generic package drawing. Confirm the exposed pad or thermal arrangement, power-supply requirements, decoupling strategy, programming interface, and unused-pin treatment in the device documentation. A hardware-in-the-loop test is particularly valuable when firmware depends on precise peripheral timing or external communication protocols.

This page organizes the confirmed device identity, package, memory, clock, commercial sourcing route, same-footprint family options, and design considerations into a single engineering reference. It is intended to help engineers evaluate the MC9S08DV96CLL for legacy or ongoing embedded-control programs while keeping unresolved electrical and pin-level details explicitly separated from confirmed product facts.

Drop-in-Alternativen für MC9S08DV96CLL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08DV96CLL (gleiche Bauform und Footprint) – abweichend in Package.

NXP Semiconductors
Package: 100-LQFP (14x14 mm)
Vergleichen mit MC9S08DV96CLL →

MC9S08DV128CLL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-LQFP (14 mm x 14 mm)
Flash is 128 KB versus 96 KB, a 32 KB or 33.3% increase; CPU family and package remain unchanged.

📋 Referenzalternative (nicht im Katalog)

MC9S08DV64CLL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-LQFP (14 mm x 14 mm)
Flash is 64 KB versus 96 KB, a 32 KB or 33.3% reduction; CPU family and package remain unchanged.

📋 Referenzalternative (nicht im Katalog)

MC9S08DV48CLL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-LQFP (14 mm x 14 mm)
Flash is 48 KB versus 96 KB, a 48 KB or 50.0% reduction; the larger target memory allocation may be decisive.

📋 Referenzalternative (nicht im Katalog)

MC9S08DV32CLL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-LQFP (14 mm x 14 mm)
Flash is 32 KB versus 96 KB, a 64 KB or 66.7% reduction; adequate firmware capacity must be verified before substitution.

📋 Referenzalternative (nicht im Katalog)

MC9S08DZ96CLL

✅ Drop-In
NXP Semiconductors
📦 100-LQFP (14 mm x 14 mm)
8-bit S08 HCS08 microcontroller · 40 MHz · 20 MHz · 96 KB · 2 KB · 12-bit · 24 channels · 2.5 µs

Preis auf Anfrage

Datenblatt ansehen →

MC9S08DV96CLL Grenzwerte & elektrische Eigenschaften

Product Type 8-bit S08 microcontroller
Processor Architecture 8-bit
Maximum Operating Frequency 40 MHz
Program Memory Type Flash
Program Memory Size 96 KB (96K x 8)
Gehäuse 100-LQFP (14 mm x 14 mm)
Lead Count 100 leads
Montageart Surface mount
Process Technology CMOS
Manufacturer Freescale Semiconductor / NXP Semiconductors

MC9S08DV96CLL 100-lqfp (14 mm x 14 mm) Pinbelegungsleitfaden

Pinbelegung für MC9S08DV96CLL (100-lqfp (14 mm x 14 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MC9S08DV96CLL im 100-lqfp (14 mm x 14 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MC9S08DV96CLL.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MC9S08DV96CLL ist geeignet für 6 Anwendungs: Industrial Equipment Controllers, Appliance and Household Control, Motor and Motion Control Modules, Sensing and Measurement Instruments, Communications-Enabled Embedded Products, Programmable Control and Automation Cards.

🏭

Industrial Equipment Controllers

MC9S08DV96CLL fits embedded industrial-control modules that require an 8-bit processor, a 40 MHz operating rating, and 96 KB of flash for operating code. Its 100-LQFP package offers a large number of accessible connections for sensors, digital controls, communication interfaces, and status indicators without requiring the extremely small land pattern of a leadless package. The 96 KB flash allocation can hold application logic, configuration tables, diagnostic routines, and communication handlers. Before schematic release, verify the required peripheral functions, operating voltage, RAM capacity, and pin multiplexing in the NXP device documentation. This makes the device particularly suitable for maintaining controllers built around an established S08 code base and an existing 14 mm square board outline.

🔧

Appliance and Household Control

The MC9S08DV96CLL can serve as the central controller in appliance systems combining local control, user interfaces, and safety-related state management. Its 40 MHz clock rating provides headroom for responsive control routines, while 96 KB of flash stores operating modes, calibration values, diagnostic logic, and interface protocols. The 100-LQFP package is useful when a product requires numerous discrete control points and maintainability during assembly. Firmware should be structured so critical functions do not depend on unavailable timing or peripheral assumptions. Confirm input limits, output-drive capability, EEPROM requirements, and the behavior of every unused lead before applying it to a mains-connected appliance. The S08 software environment can also reduce migration effort in legacy appliance platforms.

⚡

Motor and Motion Control Modules

MC9S08DV96CLL is applicable to compact motor-control and motion-control subsystems where an embedded controller coordinates commands, sensing, sequencing, and external driver logic. The 8-bit architecture is well matched to deterministic supervisory loops, while the 40 MHz operating rating supports more demanding control and communication routines than the slowest 8-bit controllers. Its 96 KB flash area provides room for state-machine logic and motion tables, and the 100-LQFP package permits connection to position sensing, current sensing, driver control, and communications. Actual suitability depends on the complete pin and peripheral configuration, which must be checked in the NXP data sheet. Validate timing margins, interrupt latency, watchdog behavior, and safe-state requirements with representative motor and load conditions.

🧩

Sensing and Measurement Instruments

MC9S08DV96CLL can be evaluated for compact sensing instruments that combine signal conditioning, local computation, calibration, and a serial control interface. Its 40 MHz clock rating is appropriate for coordinated sampling control, digital filtering, and measurement-sequence management, while 96 KB of flash provides space for firmware and lookup data. The large 100-LQFP package offers flexible routing for external converters, sensors, references, and communication transceivers. Engineers should verify whether the selected device variant includes the required timers, serial interfaces, and analog functions before committing to it. Calibration storage and measurement accuracy also depend on the unavailable EEPROM capacity and analog peripheral details. A successful design requires reviewing the NXP electrical characteristics and exercising the complete signal path across temperature and supply variation.

🌐

Communications-Enabled Embedded Products

MC9S08DV96CLL is suitable for compact embedded products that need local protocol handling and firmware-driven control alongside a communications interface. The 96 KB flash allocation allows protocol state machines, configuration data, diagnostics, and application code to reside in one controller, while the 40 MHz rating supports responsive message processing. With 100 leads, the package provides a practical number of connections for a UART-capable transceiver, status signals, controls, and programming access. The precise serial peripheral set and multiplexing arrangement must be confirmed in the manufacturer documentation before assigning pins. For network-capable products, validate protocol timing, interrupt latency, bootloader behavior, and recovery after communication loss. Legacy S08 communication modules may benefit from reusing established drivers, although complete software regression testing remains necessary.

🔧

Programmable Control and Automation Cards

MC9S08DV96CLL can support programmable control cards in education, prototyping, laboratory, and small automation equipment. The 8-bit S08 controller provides a defined firmware platform, 40 MHz operating capability, and 96 KB of flash for relatively substantial standalone control logic. Its 100-LQFP package offers accessible leads and a 14 mm by 14 mm footprint that can simplify prototype assembly compared with leadless packages. Designers can allocate pins to inputs, outputs, communications, and programming while retaining a conventional surface-mount assembly process. Before building a card, verify the exact voltage range, debug or programming interface, reset requirements, and all peripheral assignments. Prototype boards should follow the NXP reference layout and provide adequate decoupling, programming access, test points, and expansion connectors.

What are the key specifications of MC9S08DV96CLL?
The MC9S08DV96CLL is an 8-bit S08 microcontroller rated for operation up to 40 MHz, with 96 KB of flash memory in a 100-lead LQFP package measuring 14 mm by 14 mm. The confirmed device identity and package are described by NXP product documentation and the manufacturer-linked catalog entries. Its broader feature set includes embedded flash and CMOS fabrication, while RAM, EEPROM, voltage limits, I/O quantity, and individual peripheral functions should be confirmed in the device data sheet before final schematic or firmware design.
What is MC9S08DV96CLL used for?
MC9S08DV96CLL is used for embedded-control designs that require an 8-bit processor, 96 KB of flash program storage, and a 40 MHz operating frequency. Suitable applications include appliance controllers, industrial equipment, compact motor-control modules, sensing instruments, and communications-enabled embedded products. The 100-LQFP package exposes a generous pin count for mixed-signal, communications, and control connectivity. Confirm the exact peripheral mix and electrical limits against the NXP device documentation before assigning every function.
Where can I download the MC9S08DV96CLL datasheet PDF?
The MC9S08DV96CLL data sheet is available through NXP's product-document path at https://www.nxp.com/docs/en/data-sheet/MC9S08DV96.pdf. Use the manufacturer document for pin assignments, electrical characteristics, memory maps, timing, and package drawings rather than relying on a catalog summary. The NXP document also provides the appropriate basis for checking programming connections, reset behavior, power requirements, and peripheral multiplexing. Preserve the document revision associated with the qualification and production configuration used in the design.
Where can I find the MC9S08DV96CLL pinout?
The MC9S08DV96CLL pinout is defined in the NXP device data sheet, which contains the numbered 100-LQFP pin assignment and alternate-function details. Because the catalog excerpt does not reproduce every pin name, use the manufacturer pin-description table when assigning PCB tracks and connector signals. Do not infer active-high or active-low behavior from a generic package diagram. Also check power, ground, programming, reset, and unused-pin requirements from the same document before releasing the layout.
Is MC9S08DV96CLL an 8-bit or 32-bit microcontroller?
MC9S08DV96CLL is an 8-bit S08 microcontroller. Its confirmed operating frequency is 40 MHz, and it contains 96 KB of flash memory organized as 96K x 8. The 8-bit processor architecture and 96K x 8 memory organization are both explicit in the product listing. It should therefore be evaluated as an 8-bit embedded controller rather than as a 32-bit processor, with firmware architecture, interrupt handling, and peripheral requirements considered accordingly.
How much flash memory does MC9S08DV96CLL contain?
MC9S08DV96CLL contains 96 KB of embedded flash memory, listed as 96K x 8. That capacity distinguishes it from the 32K x 8 organization of the MC9S08AW32CPUE comparison part. The 96 KB flash allocation provides room for firmware, calibration tables, state machines, and communication routines in embedded products. Confirm the map of flash, RAM, EEPROM, and peripheral registers in the NXP documentation before allocating code and data sections.
MC9S08DV96CLL vs MC9S08DZ96CLL - which is better?
MC9S08DV96CLL and MC9S08DZ96CLL are closely related 8-bit S08 controllers with 96 KB of flash, but the MC9S08DZ96CLL listing explicitly identifies 2 KB of EEPROM. MC9S08DV96CLL is confirmed at 40 MHz and in a 100-LQFP package. Selection should depend on required EEPROM capacity, peripheral differences, lifecycle requirements, and verified package compatibility. For an existing MC9S08DV96CLL footprint, perform a complete pin, clock, memory, and peripheral comparison before substituting MC9S08DZ96CLL.
When should I choose MC9S08DV96CLL over another 8-bit MCU?
Choose MC9S08DV96CLL when an established S08 software base, 96 KB of flash, a 40 MHz clock rating, and a 100-LQFP footprint align with the product. It is particularly relevant when maintaining legacy equipment or reusing an existing board and firmware environment. Select another family when the design requires a different package, newer peripheral set, different memory architecture, or a supported lifecycle path beyond the S08 platform. Migration should be evaluated at the firmware, peripheral, pin, and qualification levels.
What is the best drop-in replacement for MC9S08DV96CLL?
The closest same-family candidate is MC9S08DZ96CLL, which is listed as an 8-bit S08 controller with 96 KB of flash and 2 KB of EEPROM. It must be treated as a conditional replacement rather than an automatic substitute until its 100-LQFP pin assignments, clock configuration, peripheral map, and electrical limits are matched against MC9S08DV96CLL. Other 8-bit MCUs with the same memory capacity are generally redesign alternatives unless a manufacturer explicitly confirms pin-to-pin compatibility.
Can MC9S08DZ96CLL replace MC9S08DV96CLL?
MC9S08DZ96CLL may be a candidate for replacing MC9S08DV96CLL after a detailed compatibility review. Both are identified as 8-bit S08 devices with 96 KB of flash, while MC9S08DZ96CLL is specifically listed with 2 KB of EEPROM. A valid drop-in decision also requires the same 100-LQFP footprint, matching pin multiplexing, acceptable supply voltage, equivalent clocking, and compatible peripheral functions. Validate the board, firmware, and programming procedure before production use.
What can replace MC9S08DV96CLL?
MC9S08DZ96CLL is the closest supported replacement candidate because it shares the S08 family and 96 KB flash configuration. Parts such as MC9S08DV128CLL, MC9S08DV64CLL, MC9S08DV48CLL, and MC9S08DV32CLL provide related same-family choices with different flash capacities. They are drop-in candidates only where the manufacturer confirms the identical 100-LQFP pinout and the changed memory capacity remains acceptable. Otherwise, changing to a different MCU family requires PCB and firmware adaptation.
Is MC9S08DV96CLL the same as MC9S08AW32CPUE?
No. MC9S08DV96CLL is listed with 96 KB of flash, while MC9S08AW32CPUE is identified with 32 KB of flash. The flash allocation differs by 64 KB, so these parts should not be treated as equivalent. Package, peripheral, and pin differences must also be checked before any substitution. MC9S08DV96CLL is more appropriate when firmware requires substantially more program storage than the 32K x 8 organization of MC9S08AW32CPUE.
What is the best NXP equivalent for MC9S08DV96CLL?
MC9S08DZ96CLL is the most direct NXP-family candidate because it retains the 8-bit S08 architecture and 96 KB flash while adding an explicitly listed 2 KB EEPROM. MC9S08DV64CLL, MC9S08DV48CLL, and MC9S08DV32CLL are lower-memory members that may fit simpler firmware while sharing the broader DV family. Choose among them according to required memory, verified package equivalence, peripheral availability, qualification status, and expected product lifecycle.
How much does MC9S08DV96CLL cost and where can it be purchased?
MC9S08DV96CLL is available for quotation through the Request a Quote form on this page. The form supports current commercial questions about unit pricing, minimum order quantity, stock, lead time, and shipment packaging without presenting stale catalog values. Current pricing and availability can vary with quantity and sourcing condition, so submit the required quantity and target package information in the quote request. Engineers should also state whether production traceability or documentation requirements apply.
Is MC9S08DV96CLL in stock and what is the lead time?
MC9S08DV96CLL stock and lead time should be confirmed through the Request a Quote form on this page. The answer can depend on the quantity ordered, manufacturer distribution channel, package condition, and whether the product is being purchased as an active-production component or an obsolete-part sourcing request. Provide the annual and build quantities so the supplier can quote realistic supply planning. Also state any required date-code, traceability, or manufacturer-authorization constraints in the request.

Technische Referenzdaten für MC9S08DV96CLL – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MC9S08DV96CLL for an embedded S08 design that needs 96 KB of flash, a 40 MHz operating rating, and the established 100-LQFP footprint. MC9S08DZ96CLL is the closest alternative when 2 KB of EEPROM and the same 96 KB flash capacity are useful, but its pin multiplexing, electrical limits, and peripheral set must be verified before replacement. MC9S08DV128CLL is appropriate when the same family and footprint are retained but additional program space is preferred. MC9S08DV64CLL, MC9S08DV48CLL, and MC9S08DV32CLL should be selected only when their reduced flash capacities still accommodate the complete application, bootloader, and update image. For new designs with different package, peripheral, memory, or lifecycle requirements, treat a different 8-bit MCU family as a redesign rather than a drop-in replacement.

Vergleich mit Alternativen

Parameter Dieses Produkt MC9S08DV128CLL MC9S08DV64CLL MC9S08DV48CLL MC9S08DV32CLL MC9S08DZ96CLL
Package 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Architecture 8-bit S08 8-bit S08 8-bit S08 8-bit S08 8-bit S08 8-bit S08
Flash Memory 96 KB (96K x 8) 128 KB 64 KB 48 KB 32 KB 96 KB
Key Functional Difference 96 KB flash baseline 32 KB more flash 32 KB less flash 48 KB less flash 64 KB less flash Same flash size and explicit 2 KB EEPROM

Wichtigste Unterscheidungsmerkmale

  • Provides more flash capacity than the lower-memory DV family options (vs. MC9S08DV32CLL)
  • Matches the flash capacity of the closely related DZ96 device (vs. MC9S08DZ96CLL)
  • Balances program storage more closely than the 64 KB DV option (vs. MC9S08DV64CLL)

Designhinweise

Assign all 100 leads from the NXP pin-description table rather than from a generic LQFP drawing. Preserve the package orientation marker, verify every power and ground connection, and place decoupling capacitors close to their associated device pins. The 14 mm by 14 mm footprint offers a conventional lead pitch and comparatively generous routing space, but it does not eliminate the need to check exposed-pad, thermal, and assembly requirements in the package drawing.

Confirm the device's permitted supply-voltage range, absolute maximum ratings, internal regulator behavior, and power-up requirements in the NXP data sheet. Use the manufacturer's recommended voltage and decoupling arrangement, and account for the current required by 96 KB of flash programming and the external circuitry. If the board also supports firmware updates or field programming, verify that the programming interface remains stable during reset and brownout conditions.

Do not substitute a lower-memory DV member solely because it uses the same nominal package. MC9S08DV64CLL removes 32 KB of flash, MC9S08DV48CLL removes 48 KB, and MC9S08DV32CLL removes 64 KB relative to the target. Rebuild the linker map and confirm that code, constants, bootloader, calibration data, and upgrade images still fit before treating one of these devices as a production replacement.

Route the programming signals, reset, clock, and communication lines away from noisy switching nodes and high-current motor-drive paths. Follow the NXP recommended layout for decoupling and exposed thermal features where applicable. Add accessible test points for supply, ground, reset, and programming signals so production diagnostics and firmware recovery are possible without redesigning the board.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available comparison material references RoHS and REACH as review categories but does not establish their compliance status for MC9S08DV96CLL. Confirm environmental and automotive qualification using the current NXP product documentation.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MC9S08DV96CLL datasheet MC9S08DV96CLL pinout MC9S08DV96CLL datasheet pdf MC9S08DV96CLL specifications MC9S08DV96CLL equivalent MC9S08DV96CLL replacement MC9S08DV96CLL cross reference MC9S08DV96CLL 100 LQFP MC9S08DV96CLL 40MHz 96KB flash MC9S08DV96CLL vs MC9S08DZ96CLL MC9S08DV96CLL vs MC9S08AW32CPUE NXP MC9S08DV96CLL MC9S08DV96CLL price MC9S08DV96CLL stock MC9S08DV96CLL 8-bit microcontroller

Verwandte Bauteile & Begriffe

NXP Semiconductors Freescale Semiconductor MC9S08DV96CLL MC9S08DV128CLL MC9S08DV64CLL MC9S08DV48CLL MC9S08DV32CLL MC9S08DZ96CLL MC9S08AW32CPUE S08 architecture 8-bit microcontroller embedded processor semiconductor embedded flash 96K x 8 organization 40 MHz clock 100-LQFP LQFP package family surface mount SMD 14 mm x 14 mm package embedded control system industrial controller motor control CMOS
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen