MC9S08DV96CLL - 8-Bit 40MHz 96KB Flash MCU | NXP
MPN: MC9S08DV96CLL ✓ सक्रियMC9S08DV96CLL अवलोकन
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripheral functions onto one chip. Within the broader electronics hierarchy, the MC9S08DV96CLL belongs to the 8-bit microcontroller class, which sits under embedded processors and ultimately forms part of a complete embedded-control system. This integration reduces the number of external components required for basic control, measurement, and communication tasks.
The principal published characteristics are an 8-bit architecture, 40 MHz maximum operating frequency, and 96 KB of embedded flash. The 100-LQFP package provides 100 electrical leads for power, ground, input/output, communications, timing, and control functions. Its 14 mm by 14 mm body is larger than compact leadless packages, which can make assembly and prototype inspection easier while providing numerous externally accessible connections.
The S08 architecture is intended for embedded applications where an 8-bit processor, dedicated program storage, and integrated peripherals offer an effective balance of capability and design simplicity. The 40 MHz clock rating supports higher-rate control-loop and signal-processing tasks than a basic low-speed microcontroller, while the 96 KB flash allocation provides substantially more program space than small 8-bit controllers. Detailed RAM, EEPROM, peripheral, voltage, and environmental limits must be confirmed in the NXP device documentation before schematic release.
Typical design uses include industrial equipment, appliance controllers, motor-control modules, sensing instruments, and compact embedded control boards. In these systems, the flash memory stores application firmware and configuration routines, while the 100-lead package allows external sensors, actuators, communications circuitry, and power-management components to connect to the microcontroller. Firmware selection should account for interrupt latency, peripheral mapping, memory endurance, and the required control-loop bandwidth.
PCB implementation should follow the NXP pin-assignment and layout guidance rather than assigning the 100 leads solely from the generic package drawing. Confirm the exposed pad or thermal arrangement, power-supply requirements, decoupling strategy, programming interface, and unused-pin treatment in the device documentation. A hardware-in-the-loop test is particularly valuable when firmware depends on precise peripheral timing or external communication protocols.
This page organizes the confirmed device identity, package, memory, clock, commercial sourcing route, same-footprint family options, and design considerations into a single engineering reference. It is intended to help engineers evaluate the MC9S08DV96CLL for legacy or ongoing embedded-control programs while keeping unresolved electrical and pin-level details explicitly separated from confirmed product facts.
के लिए ड्रॉप-इन विकल्प MC9S08DV96CLL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S08DV96CLL (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.
MC9S08DV128CLL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MC9S08DV64CLL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MC9S08DV48CLL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MC9S08DV32CLL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MC9S08DZ96CLL
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MC9S08DV96CLL Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit S08 microcontroller |
| Processor Architecture | 8-bit |
| Maximum Operating Frequency | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 96 KB (96K x 8) |
| पैकेज | 100-LQFP (14 mm x 14 mm) |
| Lead Count | 100 leads |
| माउंटिंग प्रकार | Surface mount |
| Process Technology | CMOS |
| Manufacturer | Freescale Semiconductor / NXP Semiconductors |
MC9S08DV96CLL 100-lqfp (14 mm x 14 mm) पिन कॉन्फ़िगरेशन गाइड
MC9S08DV96CLL (100-lqfp (14 mm x 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S08DV96CLL.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MC9S08DV96CLL के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Equipment Controllers, Appliance and Household Control, Motor and Motion Control Modules, Sensing and Measurement Instruments, Communications-Enabled Embedded Products, Programmable Control and Automation Cards.
Industrial Equipment Controllers
MC9S08DV96CLL fits embedded industrial-control modules that require an 8-bit processor, a 40 MHz operating rating, and 96 KB of flash for operating code. Its 100-LQFP package offers a large number of accessible connections for sensors, digital controls, communication interfaces, and status indicators without requiring the extremely small land pattern of a leadless package. The 96 KB flash allocation can hold application logic, configuration tables, diagnostic routines, and communication handlers. Before schematic release, verify the required peripheral functions, operating voltage, RAM capacity, and pin multiplexing in the NXP device documentation. This makes the device particularly suitable for maintaining controllers built around an established S08 code base and an existing 14 mm square board outline.
Appliance and Household Control
The MC9S08DV96CLL can serve as the central controller in appliance systems combining local control, user interfaces, and safety-related state management. Its 40 MHz clock rating provides headroom for responsive control routines, while 96 KB of flash stores operating modes, calibration values, diagnostic logic, and interface protocols. The 100-LQFP package is useful when a product requires numerous discrete control points and maintainability during assembly. Firmware should be structured so critical functions do not depend on unavailable timing or peripheral assumptions. Confirm input limits, output-drive capability, EEPROM requirements, and the behavior of every unused lead before applying it to a mains-connected appliance. The S08 software environment can also reduce migration effort in legacy appliance platforms.
Motor and Motion Control Modules
MC9S08DV96CLL is applicable to compact motor-control and motion-control subsystems where an embedded controller coordinates commands, sensing, sequencing, and external driver logic. The 8-bit architecture is well matched to deterministic supervisory loops, while the 40 MHz operating rating supports more demanding control and communication routines than the slowest 8-bit controllers. Its 96 KB flash area provides room for state-machine logic and motion tables, and the 100-LQFP package permits connection to position sensing, current sensing, driver control, and communications. Actual suitability depends on the complete pin and peripheral configuration, which must be checked in the NXP data sheet. Validate timing margins, interrupt latency, watchdog behavior, and safe-state requirements with representative motor and load conditions.
Sensing and Measurement Instruments
MC9S08DV96CLL can be evaluated for compact sensing instruments that combine signal conditioning, local computation, calibration, and a serial control interface. Its 40 MHz clock rating is appropriate for coordinated sampling control, digital filtering, and measurement-sequence management, while 96 KB of flash provides space for firmware and lookup data. The large 100-LQFP package offers flexible routing for external converters, sensors, references, and communication transceivers. Engineers should verify whether the selected device variant includes the required timers, serial interfaces, and analog functions before committing to it. Calibration storage and measurement accuracy also depend on the unavailable EEPROM capacity and analog peripheral details. A successful design requires reviewing the NXP electrical characteristics and exercising the complete signal path across temperature and supply variation.
Communications-Enabled Embedded Products
MC9S08DV96CLL is suitable for compact embedded products that need local protocol handling and firmware-driven control alongside a communications interface. The 96 KB flash allocation allows protocol state machines, configuration data, diagnostics, and application code to reside in one controller, while the 40 MHz rating supports responsive message processing. With 100 leads, the package provides a practical number of connections for a UART-capable transceiver, status signals, controls, and programming access. The precise serial peripheral set and multiplexing arrangement must be confirmed in the manufacturer documentation before assigning pins. For network-capable products, validate protocol timing, interrupt latency, bootloader behavior, and recovery after communication loss. Legacy S08 communication modules may benefit from reusing established drivers, although complete software regression testing remains necessary.
Programmable Control and Automation Cards
MC9S08DV96CLL can support programmable control cards in education, prototyping, laboratory, and small automation equipment. The 8-bit S08 controller provides a defined firmware platform, 40 MHz operating capability, and 96 KB of flash for relatively substantial standalone control logic. Its 100-LQFP package offers accessible leads and a 14 mm by 14 mm footprint that can simplify prototype assembly compared with leadless packages. Designers can allocate pins to inputs, outputs, communications, and programming while retaining a conventional surface-mount assembly process. Before building a card, verify the exact voltage range, debug or programming interface, reset requirements, and all peripheral assignments. Prototype boards should follow the NXP reference layout and provide adequate decoupling, programming access, test points, and expansion connectors.
के लिए इंजीनियरिंग संदर्भ डेटा MC9S08DV96CLL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MC9S08DV128CLL | MC9S08DV64CLL | MC9S08DV48CLL | MC9S08DV32CLL | MC9S08DZ96CLL |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Architecture | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 |
| Flash Memory | 96 KB (96K x 8) | 128 KB | 64 KB | 48 KB | 32 KB | 96 KB |
| Key Functional Difference | 96 KB flash baseline | 32 KB more flash | 32 KB less flash | 48 KB less flash | 64 KB less flash | Same flash size and explicit 2 KB EEPROM |
मुख्य विशेषताएँ
- Provides more flash capacity than the lower-memory DV family options (बनामMC9S08DV32CLL)
- Matches the flash capacity of the closely related DZ96 device (बनामMC9S08DZ96CLL)
- Balances program storage more closely than the 64 KB DV option (बनामMC9S08DV64CLL)
डिज़ाइन नोट्स
Assign all 100 leads from the NXP pin-description table rather than from a generic LQFP drawing. Preserve the package orientation marker, verify every power and ground connection, and place decoupling capacitors close to their associated device pins. The 14 mm by 14 mm footprint offers a conventional lead pitch and comparatively generous routing space, but it does not eliminate the need to check exposed-pad, thermal, and assembly requirements in the package drawing.
Confirm the device's permitted supply-voltage range, absolute maximum ratings, internal regulator behavior, and power-up requirements in the NXP data sheet. Use the manufacturer's recommended voltage and decoupling arrangement, and account for the current required by 96 KB of flash programming and the external circuitry. If the board also supports firmware updates or field programming, verify that the programming interface remains stable during reset and brownout conditions.
Do not substitute a lower-memory DV member solely because it uses the same nominal package. MC9S08DV64CLL removes 32 KB of flash, MC9S08DV48CLL removes 48 KB, and MC9S08DV32CLL removes 64 KB relative to the target. Rebuild the linker map and confirm that code, constants, bootloader, calibration data, and upgrade images still fit before treating one of these devices as a production replacement.
Route the programming signals, reset, clock, and communication lines away from noisy switching nodes and high-current motor-drive paths. Follow the NXP recommended layout for decoupling and exposed thermal features where applicable. Add accessible test points for supply, ground, reset, and programming signals so production diagnostics and firmware recovery are possible without redesigning the board.
अनुपालन जानकारी
The available comparison material references RoHS and REACH as review categories but does not establish their compliance status for MC9S08DV96CLL. Confirm environmental and automotive qualification using the current NXP product documentation.