NXP Semiconductors

MC9S08PA8AVWJ - 8-bit 20MHz MCU, 8KB Flash | NXP | SOIC-20

Teilenummer: MC9S08PA8AVWJ ✓ Aktiv
3.3 V / 5 V Vdss 20-pin SOIC Package 20 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

MC9S08PA8AVWJ Übersicht

The NXP Semiconductors MC9S08PA8AVWJ is an 8-bit S08P-family microcontroller with a 20 MHz operating frequency, 8 KB of flash program memory, EEPROM capability, and integrated analog peripherals, supplied in a 20-pin SOIC package. It is designed for cost-sensitive embedded applications that require flexible control, embedded nonvolatile data storage, and mixed signal measurement without relying on a larger processor.

An 8-bit microcontroller is a compact programmable controller used to monitor inputs, execute control logic, and drive outputs in appliances, industrial equipment, consumer products, and embedded modules. The S08P family combines a simple 8-bit architecture with familiar embedded resources, making it suitable for products that need deterministic control, modest computation, and low system complexity. The MC9S08PA8AVWJ also belongs to the broader semiconductor hierarchy of microcontroller, embedded processor, and programmable control device.

The device includes an 8-bit S08 core operating up to 20 MHz, 8 KB of flash memory, EEPROM, an ADC, an analog comparator, and a motor-control Flex Timer. These resources support applications involving sensors, push-button interfaces, display updates, motor or actuator timing, and general-purpose embedded control. The 5 V operating class and 3.3 V/5 V supply descriptions in product listings make it particularly relevant to designs that use conventional industrial and consumer logic voltage levels.

The S08P architecture is designed for straightforward embedded software development. Flash permits program updates during manufacturing or field configuration, while EEPROM supports parameters, calibration values, counters, and configuration data that must survive power loss. The integrated ADC and analog comparator reduce the need for separate sensing components when the application requires simple analog monitoring or threshold detection.

Typical uses include small motor-control systems, appliance controllers, sensor nodes, industrial interface modules, and cost-sensitive consumer equipment. In a motor-control design, the Flex Timer can provide timing and modulation functions, while the ADC and comparator can monitor current, position, or sensor thresholds. In a sensor node, the MCU can sample analog channels, debounce inputs, update EEPROM-backed settings, and report results through a serial or discrete interface.

The 20-pin SOIC package supports conventional surface-mount assembly and requires careful PCB layout around the power, ground, reset, clock, and I/O connections. Follow the pin-description and recommended decoupling information in the NXP manufacturer datasheet when assigning tracks. The S08P family is described by NXP as pin-compatible across scalable family options, which can simplify migration between devices with different memory or peripheral configurations when the electrical and pin requirements are checked.

This page combines the manufacturer product information, package and memory details, application guidance, practical design considerations, and a structured comparison with S08P-family alternatives. It is intended to help engineers identify whether the MC9S08PA8AVWJ provides the required memory, analog resources, timing peripherals, voltage class, and package for an embedded control design.

Drop-in-Alternativen für MC9S08PA8AVWJ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08PA8AVWJ (gleiche Bauform und Footprint) – abweichend in Analog Comparator, Package, ADC, CPU Core, EEPROM.

NXP Semiconductors
Analog Comparator: Integrated
Package: 20-SOIC (SOIC-20, narrow body)
CPU Core: 8-bit S08 central processor unit
Vergleichen mit MC9S08PA8AVWJ →
NXP Semiconductors
Analog Comparator: Integrated
ADC: Integrated
CPU Core: HCS08L core
Vergleichen mit MC9S08PA8AVWJ →

MC9S08PA8VWJ

✅ Drop-In
NXP Semiconductors
📦 20-SOIC
8-bit S08 microcontroller · HCS08L core · 20 MHz · 8 KB (8K x 8) · Flash · 8 KB · Integrated · Integrated

Preis auf Anfrage

Datenblatt ansehen →

MC9S08PA8VWJR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-SOIC
Same MC9S08PA8 family configuration with 8 KB flash and 20-pin SOIC footprint; R suffix changes the commercial packing format rather than the core ratings

📋 Referenzalternative (nicht im Katalog)

MC9S08PA4VWJ

✅ Drop-In ⚠️ Spezifikationen ungeprüft
NXP Semiconductors
📦 20-SOIC
8-bit S08 central processor unit · 4 KB (4K x 8) · 20 MHz at 2.7 V to 5.5 V · 2.7 V to 5.5 V · 20-SOIC (SOIC-20, narrow body) · Surface Mount

Preis auf Anfrage

Datenblatt ansehen →

MC9S08PA4VWJR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-SOIC
Same S08PA family and 20-pin SOIC footprint with 4 KB flash versus 8 KB; R suffix indicates a different commercial packing format

📋 Referenzalternative (nicht im Katalog)

MC9S08PA2VWJ

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-SOIC
Same S08PA family and 20-pin SOIC footprint with 2 KB flash versus 8 KB, a 75% reduction in program memory

📋 Referenzalternative (nicht im Katalog)

MC9S08PA8AVWJ Grenzwerte & elektrische Eigenschaften

Product Type 8-bit microcontroller
Processor Core S08 8-bit core
Maximale Taktfrequenz 20 MHz
Flash Memory 8 KB (8K x 8)
Program Memory Type Flash
EEPROM Integrated EEPROM
ADC Integrated analog-to-digital converter
Analog Comparator Integrated analog comparator
Timer Motor control Flex Timer
Versorgungsspannung 3.3 V / 5 V
Gehäuse 20-pin SOIC
Package Dimensions 0.295 in (7.50 mm) width
Montageart Surface mount
Instruction Set 8-bit S08 instruction set
EFT/ESD Performance Manufacturer-described S08P family performance
Lebenszyklusstatus Active

MC9S08PA8AVWJ 0.295 in (7.50 mm) width Pinbelegungsleitfaden

Pinbelegung für MC9S08PA8AVWJ (0.295 in (7.50 mm) width-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MC9S08PA8AVWJ im 0.295 in (7.50 mm) width-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MC9S08PA8AVWJ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MC9S08PA8AVWJ ist geeignet für 6 Anwendungs: Small Motor and Actuator Controllers, Appliance and Household Equipment, Industrial Sensor and Threshold Modules, Programmable Logic and Sequential Controls, HMI Keypad and Status Interface, Consumer and Communication Accessories.

🏭

Small Motor and Actuator Controllers

The MC9S08PA8AVWJ fits compact motor and actuator control because its 20 MHz S08 core provides event timing while the motor-control Flex Timer handles timer-dependent functions. The 8 KB flash stores the control algorithm, and the ADC can monitor a current, position, or speed-related analog signal when the motor driver exposes one. EEPROM is useful for retaining calibration values, travel limits, or operating counters between power cycles. The design must still account for motor supply transients, driver protection, grounding, and the voltage rating of every connected signal.

🔧

Appliance and Household Equipment

The MC9S08PA8AVWJ is appropriate for appliance control boards that combine digital inputs, status indicators, and limited analog sensing. Its 8-bit S08 core handles deterministic control logic, the 8 KB flash supports application firmware, and EEPROM can store user settings or calibration values without using external memory. The ADC and comparator can support functions such as level detection, temperature sensing, or simple threshold monitoring. For mains-connected equipment, maintain the required separation between low-voltage control circuitry and hazardous power sections, and use the manufacturer electrical guidance for decoupling and layout.

🏭

Industrial Sensor and Threshold Modules

The MC9S08PA8AVWJ works well in small industrial sensing modules where analog input monitoring and local decision-making are needed. The ADC can sample sensor outputs, the analog comparator can implement fast threshold detection, and the 8-bit core can filter data, update indicators, or communicate with a higher-level controller. Its 8 KB flash provides room for calibration logic and protocol handling, while EEPROM preserves configuration values. Designers should check input impedance, sampling requirements, and the 3.3 V/5 V interface compatibility of external sensors before finalizing the schematic.

🖥️

Programmable Logic and Sequential Controls

The MC9S08PA8AVWJ can implement programmable relays, sequencers, and logic controllers where deterministic timing and modest data processing are sufficient. At up to 20 MHz, the S08 core supports multitasking or state-machine firmware, while the Flex Timer provides periodic timing resources. The 8 KB flash allows the manufacturer to store configurable logic, and EEPROM can hold counters, schedules, or audit values. The 20-pin SOIC package makes the controller practical for a modest PCB, but the design should minimize long analog loops and place decoupling close to the supply pins.

📺

HMI Keypad and Status Interface

The MC9S08PA8AVWJ can manage compact keypads, selector switches, status LEDs, and small display interfaces in embedded equipment. The 20 MHz core is more than sufficient for debouncing, menu state, indicator updates, and serial command handling, while 8 KB of flash accommodates the interface firmware. EEPROM provides nonvolatile storage for user preferences or configuration values. The 20-pin SOIC footprint leaves a defined set of general-purpose I/O and communication pins, but designers should confirm the exact pin multiplexing and dedicated function assignments in the manufacturer pin-description table.

📱

Consumer and Communication Accessories

The MC9S08PA8AVWJ suits cost-sensitive consumer accessories that require local logic, persistent settings, and a small amount of analog measurement. It can manage button input, indicator control, configuration storage, and a simple communication peripheral without adding a larger processor. The 8 KB flash and EEPROM allow application code and user data to coexist, while the ADC and comparator support touch, level, or presence sensing in suitable designs. Component selection should account for connector grounding, ESD protection, supply startup behavior, and the available I/O count in the 20-pin package.

Zusammenfassung der empfohlenen Produkte

MC9S08PA8VWJ NXP Semiconductors Verwendet in: Small Motor and Actuator Controllers, Appliance and Household Equipment, Programmable Logic and Sequential Controls, HMI Keypad and Status Interface MC9S08PA4VWJ NXP Semiconductors Verwendet in: Small Motor and Actuator Controllers, Programmable Logic and Sequential Controls MC9S08PA2VWJ Reduced-flash option for simpler firmware Verwendet in: Appliance and Household Equipment, HMI Keypad and Status Interface MC9S08PA8VWJR Same-family alternative for compact sensor modules Verwendet in: Industrial Sensor and Threshold Modules, Consumer and Communication Accessories MC9S08PA4VWJR Same-family option for smaller firmware Verwendet in: Industrial Sensor and Threshold Modules, Consumer and Communication Accessories
What is the operating frequency of MC9S08PA8AVWJ?
The MC9S08PA8AVWJ operates at up to 20 MHz using the NXP S08 8-bit core. According to the NXP product information, the device is an 8-bit S08P-family microcontroller with 8 KB of flash memory and integrated EEPROM. The 20 MHz clock rate is suitable for embedded control loops, digital interface handling, sensor scanning, and timing functions that do not require a high-performance 32-bit processor. Engineers should use the manufacturer datasheet when selecting clock, timing, and peripheral configuration settings.
What memory resources does MC9S08PA8AVWJ provide?
The MC9S08PA8AVWJ provides 8 KB of flash program memory and integrated EEPROM for persistent data. NXP describes the part as an 8-bit, 5 V full-featured MCU with EEPROM, ADC, an analog comparator, and a motor-control Flex Timer. Flash supports the executable firmware, while EEPROM can retain configuration, calibration, counters, or other values after power removal. The exact EEPROM size and memory organization should be confirmed in the manufacturer datasheet.
Which peripherals are integrated into MC9S08PA8AVWJ?
The MC9S08PA8AVWJ integrates an ADC, an analog comparator, and a motor-control Flex Timer in addition to the S08 core and EEPROM. NXP identifies these resources as useful for simplifying system cost in embedded designs. The ADC supports analog measurement, the comparator supports threshold-style sensing, and the Flex Timer supports timing and motor-related control functions. Pin assignments, converter resolution, comparator behavior, and timer channel details should be checked against the NXP datasheet.
What package does MC9S08PA8AVWJ use?
The MC9S08PA8AVWJ is supplied in a 20-pin SOIC package, also identified in product listings as 20-SOIC with approximately 7.50 mm width. The surface-mount package is suitable for conventional PCB assembly and is distinct from the smaller packages used by many other 8-bit microcontrollers. Use the package drawing and pin-description table in the NXP manufacturer datasheet to confirm land pattern, pin orientation, and exposed or unused connections before layout release.
Is MC9S08PA8AVWJ suitable for 5 V embedded control systems?
The MC9S08PA8AVWJ is suitable for many 5 V embedded control systems because NXP describes it as a 5 V full-featured S08P MCU and product listings identify 3.3 V/5 V operation. It can control relays, read sensors, update indicators, and manage simple actuators when the board uses compatible logic levels. The selected peripheral pins, clock configuration, and external interface voltages should be checked carefully because not every I/O or peripheral mode supports every supply condition.
Where can I download the MC9S08PA8AVWJ datasheet?
The official MC9S08PA8AVWJ datasheet can be accessed through the NXP product page at https://www.nxp.com/part/MC9S08PA8AVWJ. The document should be used for the authoritative pin description, electrical characteristics, memory map, clock requirements, ADC specifications, timer functions, and recommended application circuit. Use the exact device suffix when selecting ordering information, and do not infer pin functions from a related S08P member without checking its package and datasheet.
Where can I find the MC9S08PA8AVWJ pinout?
The MC9S08PA8AVWJ pinout is shown in the pin-description table and package drawing in the NXP manufacturer datasheet. The package is a 20-pin SOIC, but the complete numbered signal assignment should be taken directly from that table rather than reconstructed from another family member. For PCB work, confirm the pin-1 orientation, power and ground pins, reset connection, oscillator pins, and all analog-capable pins before routing the board.
Can MC9S08PA8AVWJ be used for motor control applications?
The MC9S08PA8AVWJ is a candidate for simple motor-control and actuator-timing designs because it includes a motor-control Flex Timer along with ADC and comparator resources. A practical implementation can use the timer for timing or modulation, the ADC for current or position sensing, and the comparator for simple threshold detection. The motor voltage, current, driver topology, protection requirements, and whether the Flex Timer can safely drive the selected load must be evaluated separately.
What is the best drop-in replacement for MC9S08PA8AVWJ?
The best drop-in replacement is the closest S08P-family device with the same 20-pin SOIC footprint, matching 8-bit core, 3.3 V/5 V supply class, and required flash and EEPROM resources. MC9S08PA8VWJ is a closely related NXP candidate, while MC9S08PA8VWJR changes the shipping format rather than the electrical design. Before replacement, verify the exact pinout, memory size, peripheral set, clock requirements, temperature range, and programming compatibility in the NXP datasheets.
Can MC9S08PA8AVWJ replace an S08P device with 8 KB of flash?
The MC9S08PA8AVWJ can replace an 8 KB-flash S08P device only when the alternative uses the same package, voltage class, pin assignment, and required peripherals. Its 20 MHz S08 core, 8 KB flash, EEPROM, ADC, comparator, and Flex Timer make it suitable for compatible S08P migration paths. Firmware image size and peripheral configuration must also be checked. A same-package designation alone does not guarantee that every software feature or production configuration is interchangeable.
MC9S08PA8AVWJ vs MC9S08PA8VWJ, which is better for an existing design?
MC9S08PA8AVWJ and MC9S08PA8VWJ are closely related NXP S08P devices, and the decision depends on the ordering suffix, package format, temperature grade, and exact ordering requirements rather than a major change in core architecture. Both are associated with 8-bit S08P control and 8 KB flash designs. Check the manufacturer ordering information and device data sheets for lifecycle, temperature, and packing details before selecting a replacement for an existing assembly.
When should I choose MC9S08PA8AVWJ instead of a smaller 8-bit MCU?
Choose MC9S08PA8AVWJ when the design benefits from an 8 KB flash program area, integrated EEPROM, ADC, analog comparator, and motor-control Flex Timer while retaining a simple 8-bit architecture. It is a better fit than a more basic controller when the board needs local persistent parameters, analog measurement, or deterministic actuator timing. For designs that only perform simple digital I/O, a smaller device may reduce cost and board area, so compare the required peripherals and memory rather than selecting solely by clock speed.
Where can I buy MC9S08PA8AVWJ and check commercial availability?
Commercial availability and current market conditions for MC9S08PA8AVWJ should be confirmed through the Request a Quote form on this page. The form is the appropriate route for current unit availability, quantity breaks, order confirmation, and delivery scheduling. Engineers should specify the exact MPN, 20-pin SOIC requirement, and desired commercial packaging when requesting a quotation so that the supplier can confirm the correct NXP ordering configuration.
What is the lead time for MC9S08PA8AVWJ?
The current lead time for MC9S08PA8AVWJ should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, factory availability, and the selected commercial packaging, so an estimate should be tied to a specific purchase order rather than presented as a fixed interval. Include the exact MPN and requested quantity when asking for a delivery commitment.
Is MC9S08PA8AVWJ in stock?
MC9S08PA8AVWJ is identified as active by NXP, but live stock for the exact ordering suffix should be confirmed through the Request a Quote form on this page. Inventory can vary by package format and quantity, and a product-page listing does not by itself guarantee immediately available material. Submit the exact MPN and required quantity for a current availability confirmation and production scheduling information.
What are the key specifications of MC9S08PA8AVWJ that engineers should know?
The key specifications are a 20 MHz maximum operating frequency, 8-bit S08 core, 8 KB flash memory, integrated EEPROM, ADC, analog comparator, motor-control Flex Timer, 3.3 V/5 V operation, and a 20-pin SOIC package. NXP describes the device as an 8-bit, 5 V full-featured MCU with EEPROM and emphasizes a simple, scalable S08P platform. These resources position it for analog monitoring, persistent configuration, timing, and compact embedded-control designs.
What is the best NXP equivalent for MC9S08PA8AVWJ?
The closest NXP alternative is MC9S08PA8VWJ because it belongs to the same S08PA family and targets the same 8 KB-flash, 8-bit embedded-control use case. MC9S08PA8VWJR is another same-family ordering option associated with a different commercial packaging format. The final choice must account for exact package, temperature range, pin configuration, memory, lifecycle, and ordering code. Cross-brand substitutes require a separate pin and firmware compatibility review.

Technische Referenzdaten für MC9S08PA8AVWJ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MC9S08PA8AVWJ for compact embedded systems that need an 8-bit S08 core, 8 KB of flash, EEPROM, analog measurement, comparator-based detection, and timer-driven control in a 20-pin SOIC package. It is a strong fit for appliance controllers, simple industrial sensing modules, programmable logic, and compact motor-control products. Select MC9S08PA8VWJ when its exact ordering and lifecycle configuration better matches the production plan, and consider MC9S08PA8VWJR when the required commercial packing format differs. MC9S08PA4 variants are appropriate only when 4 KB flash is sufficient; they remove half of the program-memory capacity. MC9S08PA2 variants suit very small programs but provide 6 KB less flash than the target. Before final selection, verify the exact pinout, temperature range, peripheral availability, memory map, and software image size in the manufacturer documentation.

Vergleich mit Alternativen

Parameter Dieses Produkt MC9S08PA8VWJ MC9S08PA8VWJR MC9S08PA4VWJ MC9S08PA4VWJR MC9S08PA2VWJ
Package 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Core 8-bit S08 core 8-bit S08 core 8-bit S08 core 8-bit S08 core 8-bit S08 core 8-bit S08 core
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB 8 KB 8 KB 4 KB 4 KB 2 KB
EEPROM Integrated EEPROM Integrated EEPROM Integrated EEPROM Integrated EEPROM Integrated EEPROM Integrated EEPROM
Analog Resources ADC and analog comparator ADC and analog comparator ADC and analog comparator ADC and analog comparator ADC and analog comparator ADC and analog comparator
Timer Motor control Flex Timer Motor control Flex Timer Motor control Flex Timer Motor control Flex Timer Motor control Flex Timer Motor control Flex Timer
Supply Voltage 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V

Wichtigste Unterscheidungsmerkmale

  • Higher program-memory capacity within the pin-compatible S08PA family (vs. MC9S08PA4VWJ)
  • Greater firmware margin than the 2 KB entry member (vs. MC9S08PA2VWJ)
  • Integrated analog and timing resources reduce external circuitry (vs. MC9S08PA8VWJR)

Designhinweise

Place the required input and bulk capacitors close to the supply and ground pins, following the capacitor values and placement shown in the NXP manufacturer datasheet. Keep the analog ground and digital return strategy consistent with the recommended application circuit. Estimate the supply transient margin before adding load drivers, because a 3.3 V/5 V device does not provide margin for an unregulated supply that falls below the operating range during startup.

Route oscillator, reset, and analog inputs away from switching nodes and high-current return paths. The 20-pin SOIC footprint offers limited escape space, so prepare the pin assignment before layout and verify whether each selected I/O function has alternate mapping. A single grounded plane with careful placement is generally preferable to long split return paths, but the final topology should follow the NXP recommended layout for the selected clock and analog configuration.

Do not select a lower-flash family member solely because the package matches: MC9S08PA4 variants provide 4 KB rather than 8 KB, and MC9S08PA2 variants provide 2 KB. Build the firmware with the memory map for the exact device and leave margin for bootloader, calibration, and future functions. Also verify the suffix, temperature range, and commercial packing before releasing production artwork.

When using the ADC or comparator with external sensors, keep the analog source impedance and acquisition path within the requirements of the manufacturer datasheet. Place the sensor interface close to the relevant MCU pins, separate analog inputs from fast-changing digital nets, and provide a stable reference. The comparator can be useful for threshold detection, but hysteresis and filtering should be evaluated so that noise does not cause repeated switching in an industrial enclosure.

Treat EEPROM writes as controlled events because each update consumes limited write endurance. Store frequently changing counters in RAM, retain only required settings or checkpoints, and design firmware to tolerate an interrupted write. This approach preserves long-term reliability and reduces unnecessary Flash or EEPROM activity in field-updatable products.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer describes the S08PA family as offering strong EFT/ESD performance. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current NXP product documentation.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MC9S08PA8AVWJ datasheet MC9S08PA8AVWJ pinout MC9S08PA8AVWJ datasheet pdf MC9S08PA8AVWJ equivalent MC9S08PA8AVWJ replacement MC9S08PA8AVWJ cross reference MC9S08PA8AVWJ vs MC9S08PA8VWJ MC9S08PA8AVWJ footprint MC9S08PA8AVWJ price MC9S08PA8AVWJ stock NXP MC9S08PA8AVWJ MC9S08PA8 20-SOIC pinout MC9S08PA8 motor control application MC9S08PA8AVWJ schematic

Verwandte Bauteile & Begriffe

NXP Semiconductors MC9S08PA8AVWJ MC9S08PA8VWJ MC9S08PA8VWJR MC9S08PA4VWJ MC9S08PA4VWJR MC9S08PA2VWJ S08P family S08 8-bit core 8-bit microcontroller embedded microcontroller programmable control device semiconductor 20 MHz 8 KB flash memory EEPROM analog-to-digital converter ADC analog comparator Flex Timer motor control 20-pin SOIC SOIC package surface-mount device 3.3 V 5 V EFT ESD
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen