MC9S08PA8AVWJ - 8-bit 20MHz MCU, 8KB Flash | NXP | SOIC-20
Артикул: MC9S08PA8AVWJ ✓ АктивенMC9S08PA8AVWJ Обзор
An 8-bit microcontroller is a compact programmable controller used to monitor inputs, execute control logic, and drive outputs in appliances, industrial equipment, consumer products, and embedded modules. The S08P family combines a simple 8-bit architecture with familiar embedded resources, making it suitable for products that need deterministic control, modest computation, and low system complexity. The MC9S08PA8AVWJ also belongs to the broader semiconductor hierarchy of microcontroller, embedded processor, and programmable control device.
The device includes an 8-bit S08 core operating up to 20 MHz, 8 KB of flash memory, EEPROM, an ADC, an analog comparator, and a motor-control Flex Timer. These resources support applications involving sensors, push-button interfaces, display updates, motor or actuator timing, and general-purpose embedded control. The 5 V operating class and 3.3 V/5 V supply descriptions in product listings make it particularly relevant to designs that use conventional industrial and consumer logic voltage levels.
The S08P architecture is designed for straightforward embedded software development. Flash permits program updates during manufacturing or field configuration, while EEPROM supports parameters, calibration values, counters, and configuration data that must survive power loss. The integrated ADC and analog comparator reduce the need for separate sensing components when the application requires simple analog monitoring or threshold detection.
Typical uses include small motor-control systems, appliance controllers, sensor nodes, industrial interface modules, and cost-sensitive consumer equipment. In a motor-control design, the Flex Timer can provide timing and modulation functions, while the ADC and comparator can monitor current, position, or sensor thresholds. In a sensor node, the MCU can sample analog channels, debounce inputs, update EEPROM-backed settings, and report results through a serial or discrete interface.
The 20-pin SOIC package supports conventional surface-mount assembly and requires careful PCB layout around the power, ground, reset, clock, and I/O connections. Follow the pin-description and recommended decoupling information in the NXP manufacturer datasheet when assigning tracks. The S08P family is described by NXP as pin-compatible across scalable family options, which can simplify migration between devices with different memory or peripheral configurations when the electrical and pin requirements are checked.
This page combines the manufacturer product information, package and memory details, application guidance, practical design considerations, and a structured comparison with S08P-family alternatives. It is intended to help engineers identify whether the MC9S08PA8AVWJ provides the required memory, analog resources, timing peripherals, voltage class, and package for an embedded control design.
Аналоги без доработки для MC9S08PA8AVWJ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08PA8AVWJ (тот же форм-фактор и посадочное место) — отличается по Analog Comparator, Package, ADC, CPU Core, EEPROM.
MC9S08PA8VWJ
✅ Прямая заменаУточнить цену
Открыть даташит →MC9S08PA8VWJR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08PA4VWJ
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →MC9S08PA4VWJR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08PA2VWJ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08PA8AVWJ Максимальные параметры и электрические характеристики
| Product Type | 8-bit microcontroller |
| Processor Core | S08 8-bit core |
| Максимальная тактовая частота | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | Flash |
| EEPROM | Integrated EEPROM |
| ADC | Integrated analog-to-digital converter |
| Analog Comparator | Integrated analog comparator |
| Timer | Motor control Flex Timer |
| Напряжение питания | 3.3 V / 5 V |
| Корпус | 20-pin SOIC |
| Package Dimensions | 0.295 in (7.50 mm) width |
| Тип монтажа | Surface mount |
| Instruction Set | 8-bit S08 instruction set |
| EFT/ESD Performance | Manufacturer-described S08P family performance |
| Статус жизненного цикла | Active |
Руководство по цоколевке MC9S08PA8AVWJ в корпусе 0.295 in (7.50 mm) width
Цоколевка для MC9S08PA8AVWJ (корпус 0.295 in (7.50 mm) width). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S08PA8AVWJ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S08PA8AVWJ подходит для 6 применениеs: Small Motor and Actuator Controllers, Appliance and Household Equipment, Industrial Sensor and Threshold Modules, Programmable Logic and Sequential Controls, HMI Keypad and Status Interface, Consumer and Communication Accessories.
Small Motor and Actuator Controllers
The MC9S08PA8AVWJ fits compact motor and actuator control because its 20 MHz S08 core provides event timing while the motor-control Flex Timer handles timer-dependent functions. The 8 KB flash stores the control algorithm, and the ADC can monitor a current, position, or speed-related analog signal when the motor driver exposes one. EEPROM is useful for retaining calibration values, travel limits, or operating counters between power cycles. The design must still account for motor supply transients, driver protection, grounding, and the voltage rating of every connected signal.
Рекомендуется
Appliance and Household Equipment
The MC9S08PA8AVWJ is appropriate for appliance control boards that combine digital inputs, status indicators, and limited analog sensing. Its 8-bit S08 core handles deterministic control logic, the 8 KB flash supports application firmware, and EEPROM can store user settings or calibration values without using external memory. The ADC and comparator can support functions such as level detection, temperature sensing, or simple threshold monitoring. For mains-connected equipment, maintain the required separation between low-voltage control circuitry and hazardous power sections, and use the manufacturer electrical guidance for decoupling and layout.
Рекомендуется
Industrial Sensor and Threshold Modules
The MC9S08PA8AVWJ works well in small industrial sensing modules where analog input monitoring and local decision-making are needed. The ADC can sample sensor outputs, the analog comparator can implement fast threshold detection, and the 8-bit core can filter data, update indicators, or communicate with a higher-level controller. Its 8 KB flash provides room for calibration logic and protocol handling, while EEPROM preserves configuration values. Designers should check input impedance, sampling requirements, and the 3.3 V/5 V interface compatibility of external sensors before finalizing the schematic.
Рекомендуется
Programmable Logic and Sequential Controls
The MC9S08PA8AVWJ can implement programmable relays, sequencers, and logic controllers where deterministic timing and modest data processing are sufficient. At up to 20 MHz, the S08 core supports multitasking or state-machine firmware, while the Flex Timer provides periodic timing resources. The 8 KB flash allows the manufacturer to store configurable logic, and EEPROM can hold counters, schedules, or audit values. The 20-pin SOIC package makes the controller practical for a modest PCB, but the design should minimize long analog loops and place decoupling close to the supply pins.
Рекомендуется
HMI Keypad and Status Interface
The MC9S08PA8AVWJ can manage compact keypads, selector switches, status LEDs, and small display interfaces in embedded equipment. The 20 MHz core is more than sufficient for debouncing, menu state, indicator updates, and serial command handling, while 8 KB of flash accommodates the interface firmware. EEPROM provides nonvolatile storage for user preferences or configuration values. The 20-pin SOIC footprint leaves a defined set of general-purpose I/O and communication pins, but designers should confirm the exact pin multiplexing and dedicated function assignments in the manufacturer pin-description table.
Рекомендуется
Consumer and Communication Accessories
The MC9S08PA8AVWJ suits cost-sensitive consumer accessories that require local logic, persistent settings, and a small amount of analog measurement. It can manage button input, indicator control, configuration storage, and a simple communication peripheral without adding a larger processor. The 8 KB flash and EEPROM allow application code and user data to coexist, while the ADC and comparator support touch, level, or presence sensing in suitable designs. Component selection should account for connector grounding, ESD protection, supply startup behavior, and the available I/O count in the 20-pin package.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08PA8AVWJ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08PA8VWJ | MC9S08PA8VWJR | MC9S08PA4VWJ | MC9S08PA4VWJR | MC9S08PA2VWJ |
|---|---|---|---|---|---|---|
| Package | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 8 KB | 8 KB | 4 KB | 4 KB | 2 KB |
| EEPROM | Integrated EEPROM | Integrated EEPROM | Integrated EEPROM | Integrated EEPROM | Integrated EEPROM | Integrated EEPROM |
| Analog Resources | ADC and analog comparator | ADC and analog comparator | ADC and analog comparator | ADC and analog comparator | ADC and analog comparator | ADC and analog comparator |
| Timer | Motor control Flex Timer | Motor control Flex Timer | Motor control Flex Timer | Motor control Flex Timer | Motor control Flex Timer | Motor control Flex Timer |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
Ключевые отличия
- Higher program-memory capacity within the pin-compatible S08PA family (против MC9S08PA4VWJ)
- Greater firmware margin than the 2 KB entry member (против MC9S08PA2VWJ)
- Integrated analog and timing resources reduce external circuitry (против MC9S08PA8VWJR)
Заметки по проектированию
Place the required input and bulk capacitors close to the supply and ground pins, following the capacitor values and placement shown in the NXP manufacturer datasheet. Keep the analog ground and digital return strategy consistent with the recommended application circuit. Estimate the supply transient margin before adding load drivers, because a 3.3 V/5 V device does not provide margin for an unregulated supply that falls below the operating range during startup.
Route oscillator, reset, and analog inputs away from switching nodes and high-current return paths. The 20-pin SOIC footprint offers limited escape space, so prepare the pin assignment before layout and verify whether each selected I/O function has alternate mapping. A single grounded plane with careful placement is generally preferable to long split return paths, but the final topology should follow the NXP recommended layout for the selected clock and analog configuration.
Do not select a lower-flash family member solely because the package matches: MC9S08PA4 variants provide 4 KB rather than 8 KB, and MC9S08PA2 variants provide 2 KB. Build the firmware with the memory map for the exact device and leave margin for bootloader, calibration, and future functions. Also verify the suffix, temperature range, and commercial packing before releasing production artwork.
When using the ADC or comparator with external sensors, keep the analog source impedance and acquisition path within the requirements of the manufacturer datasheet. Place the sensor interface close to the relevant MCU pins, separate analog inputs from fast-changing digital nets, and provide a stable reference. The comparator can be useful for threshold detection, but hysteresis and filtering should be evaluated so that noise does not cause repeated switching in an industrial enclosure.
Treat EEPROM writes as controlled events because each update consumes limited write endurance. Store frequently changing counters in RAM, retain only required settings or checkpoints, and design firmware to tolerate an interrupted write. This approach preserves long-term reliability and reduces unnecessary Flash or EEPROM activity in field-updatable products.
Информация о соответствии
The manufacturer describes the S08PA family as offering strong EFT/ESD performance. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current NXP product documentation.