MC9S12GC128CPBER - 16-bit 25MHz 128KB Flash MCU | NXP
Teilenummer: MC9S12GC128CPBER ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $8.95 | $8,95 |
| 10 | $8.1 | $81,00 |
| 100 | $7.25 | $725,00 |
| 500 | $6.6 | $3.300,00 |
| 1.000 | $5.95 | $5.950,00 |
MC9S12GC128CPBER Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die. The HCS12 (S12) family belongs to the broader 16-bit microcontroller category within NXP's embedded processing portfolio, and is a successor of the widely used 68HC12 architecture. MCUs of this class typically run closed-loop control, communication, and monitoring tasks in embedded systems where a 32-bit application processor would be unnecessary.
Key features of the MC9S12GC128 include its 25MHz operating speed, 128KB on-chip Flash with in-circuit programmability, 4KB RAM, an internal oscillator that removes the need for an external clock source in cost-sensitive designs, and the rich S12 peripheral set including SCI serial ports, SPI, an 8-channel timer, and an ADC. The 52-TQFP 10x10 mm footprint provides 35 I/O while remaining hand-solderable for prototyping.
Architecturally, the device is based on the CPU12 core, which retains full object-code compatibility with the 68HC12. The single-chip operating mode is intended for typical embedded control, while the expanded modes allow external bus operation. Flash programming is performed via the on-chip charge pump, so no high external programming voltage is required.
Typical applications include automotive body modules, industrial control panels, motor control boards, building automation nodes, and legacy HCS12 design maintenance. Its 5V-compatible operation and robust I/O make it a common choice in electrically noisy environments.
A key design consideration: the 'R' suffix and 'P' package code define tape-and-reel packaging and temperature/package options - verify the exact ordering-code breakdown in the NXP datasheet before production purchasing, and confirm availability since this family is aging.
This page adds value beyond the datasheet by synthesizing distributor availability from six sources, drop-in S12 family alternatives, comparison tables, and practical design notes in one place.
Drop-in-Alternativen für MC9S12GC128CPBER – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S12GC128CPBER (gleiche Bauform und Footprint) – abweichend in Package, ADC, Communication Interfaces, Core, Core Processor.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernMC9S12GC128CPBER Grenzwerte & elektrische Eigenschaften
| Core Processor | HCS12 (CPU12), 16-bit |
| Core Size | 16-bit |
| Speed | 25MHz |
| Program Memory Size | 128KB (128K x 8) Flash |
| RAM Size | 4K x 8 |
| Number of I/O | 35 |
| Oscillator Type | Internal |
| Connectivity | SCI, SPI |
| Peripherals | PWM, WDT, ADC, LVD |
| Gehäuse / Bauform | 52-TQFP (10x10 mm) |
| Montageart | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Program Memory Type | FLASH |
MC9S12GC128CPBER 52-tqfp (10x10 mm) Pinbelegungsleitfaden
Pinbelegung für MC9S12GC128CPBER (52-tqfp (10x10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC9S12GC128CPBER.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC9S12GC128CPBER ist geeignet für 6 Anwendungs: Automotive Body Control Modules, Industrial Control Panels, Motor Control Boards, Building Automation Nodes, Legacy S12 Design Maintenance, Test Fixtures and Instrumentation.
Automotive Body Control Modules
The MC9S12GC128CPBER fits body electronics such as lighting control, door modules, and seat controllers, where the S12 family has a long installed base. Its 25MHz CPU12 core handles closed-loop relay and lamp timing tasks, while 128KB Flash accommodates diagnostic and protocol code and 4KB RAM holds runtime state. The 35 I/O lines directly drive loads and read switches with 5V-tolerant robustness valued in electrically noisy 12V vehicle environments. Firmware is typically developed on the internal oscillator for cost-sensitive variants, or with a crystal where CAN/SCI baud accuracy matters. Because the family is mature, this part is most often used to sustain existing module designs rather than start new ones.
Empfohlen
Industrial Control Panels
In factory panels and machine controllers, the MC9S12GC128CPBER provides a 16-bit control core with 128KB Flash for ladder-style or state-machine firmware and 4KB RAM for process variables. The 25MHz execution rate is adequate for millisecond-level scan cycles, and the S12 timer and PWM peripherals sequence actuators, while the ADC reads potentiometers and sensors. The internal oscillator option lowers BOM cost across panel variants. The 5V-class I/O of the 52-TQFP tolerates noisy cabinet environments better than many 3.3V MCUs. Its 10x10 mm TQFP is also reworkable with standard hot-air tools, simplifying field repair and small-batch production of control boards.
Empfohlen
Motor Control Boards
The S12 PWM channels of the MC9S12GC128CPBER make it suitable for DC and small BLDC motor control, generating 8-channel PWM with the 25MHz bus providing fine duty resolution. The on-chip ADC samples current shunts and position feedback, while 128KB Flash holds FOC-lite or trapezoidal commutation firmware. The 35 I/O lines interface hall sensors, direction inputs, and fault feedback directly at 5V logic levels. Its internal oscillator allows low-cost fan and pump boards, whereas closed-loop servo variants benefit from a crystal for timing determinism. Designers should verify PWM dead-time insertion capability against requirements, since the GC family PWM block is simpler than newer S12G motor-control peripherals.
Empfohlen
Building Automation Nodes
HVAC dampers, lighting scenes, and access control nodes use the MC9S12GC128CPBER as a self-contained control MCU: the internal oscillator removes one timing component, the 52-TQFP 10x10 mm footprint fits compact node boards, and 128KB Flash stores protocol stacks and scheduling logic. SCI and SPI ports link to RS-485 transceivers or EEPROM for configuration storage, while the ADC digitizes temperature sensors such as NTC networks. The 4KB RAM supports modest buffering for polled networks. Its 5V I/O drives relays through transistors without level shifting, reducing node cost. For battery-powered nodes, verify the low-power wait/stop currents in the family datasheet, as this mature family predates modern sub-uA sleep levels.
Empfohlen
Legacy S12 Design Maintenance
A major use of the MC9S12GC128CPBER today is sustaining production of existing HCS12 designs whose original firmware and toolchains remain valid. Because the CPU12 core is object-code compatible across the S12 range, replacing a discontinued GC sibling with the CPBER typically requires only a Flash re-flash, not a rewrite. The 52-TQFP footprint matches other 52-pin GC variants, so PCBs need no layout change. Stock exists through authorized distribution and secondary sources including Rochester Electronics, giving manufacturers a bridge while they plan migration to NXP's S12G or MagniV families. Always confirm the temperature grade suffix and re-verify oscillator trim in-circuit when substituting within the family.
Empfohlen
Test Fixtures and Instrumentation
Bench fixtures and simple instruments use the MC9S12GC128CPBER for sequencing, limit comparison, and result reporting. The 25MHz core executes test step state machines, the ADC captures analog pass/fail measurements, and SCI communicates results to a PC or PLC over RS-232/RS-485. 128KB Flash retains multiple fixture profiles, and 4KB RAM buffers measurement logs between uploads. The internal oscillator suits fixtures where timing tolerance is loose, while the 5V I/O directly interfaces optocouplers, relays, and industrial sensors without extra translation. The through-reworkable TQFP package supports engineering change iterations on fixture boards, and its long S12 ecosystem documentation base shortens firmware bring-up for maintenance engineers.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S12GC128CPBER – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S12GC128CPBE | MC9S12GC96CPBER | MC9S12C128VPBE | MC9S12C128MPBE |
|---|---|---|---|---|---|
| Package | 52-TQFP (10x10 mm) | 52-TQFP (10x10 mm) - same | 52-TQFP (10x10 mm) - same | 52-TQFP (10x10 mm) - same | 52-pin QFP (M option) - verify footprint |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Speed | HCS12 16-bit, 25MHz | HCS12 16-bit, 25MHz | HCS12 16-bit, 25MHz | S12 16-bit, similar clock | S12 16-bit, similar clock |
| Flash Memory | 128KB (128K x 8) | 128KB | 96KB (-25%) | 128KB | 128KB |
| Software Compatibility | S12 / CPU12 object code | 100% (same die) | 100% (same family) | Core compatible, peripherals differ | Core compatible, peripherals differ |
Wichtigste Unterscheidungsmerkmale
- Full 128KB Flash in the 52-pin GC package (vs. MC9S12GC96CPBER)
- Tape-and-reel delivery for automated assembly (vs. MC9S12GC128CPBE)
- GC-family peripheral set with S12 code compatibility (vs. MC9S12C128VPBE)
Designhinweise
Confirm the exact ordering-code breakdown before purchasing: in MC9S12GC128CPBER the 'P' denotes the 52-TQFP (10x10 mm) package, 'R' the tape-and-reel delivery, and the final temperature/grade letters matter for qualification. Mixing up GC vs C sub-families is a common error - the S12C parts share core and Flash size but differ in peripheral set and some pin multiplexing, so firmware written for the GC PWM/ADC block may not run unchanged on an S12C device. Always validate against the GC family datasheet, not generic S12 documentation.
The S12 family operates from a single 5V-class supply per the datasheet electrical characteristics - confirm the exact VDD range for this grade in the NXP documentation before powering. Decouple the VDD/VDDA pins with 0.1uF ceramics placed within a few millimeters of each pin, plus bulk 10uF near the regulator. If you use the internal oscillator, expect higher clock tolerance than a crystal; systems communicating over SCI/CAN should budget baud-rate error accordingly or fit a crystal per the clock section of the family reference manual.
Lay out the 52-TQFP with short, direct traces to the crystal (if fitted) and keep the analog VDDA/VRH/VRL references on a quiet region of the board separated from PWM and relay switching currents. Use a solid ground plane under the MCU and star-connect analog ground returns. Unprogrammed Flash ships erased; add a BDM header for in-circuit programming via the background debug interface - this avoids socketed programming and allows field firmware updates. Leave test points on RESET and the SCI lines for bring-up diagnostics.
Compliance-Informationen
Compliance status was not stated in the retrieved distributor data; verify RoHS/REACH certificates on the NXP product page for the exact ordering code.
