MCP3462RT-E/ST - 16-Bit Dual-Channel ADC | Microchip Technology
Teilenummer: MCP3462RT-E/ST ✓ AktivMCP3462RT-E/ST Übersicht
An ADC is a data-converter IC that converts an analog voltage into a digital value for processing, measurement, or control. Delta-sigma ADCs belong to the analog-to-digital converter hierarchy and use noise shaping plus digital filtering to obtain high resolution. The MCP3462RT-E/ST combines that architecture with programmable conversion rates, making it suitable for systems that need adjustable throughput and good DC measurement performance.
Its 16-bit resolution supports 65,536 digital code levels, while the two differential channels or four single-ended channels support redundant or multi-point measurements. The maximum programmable data rate of 153.6 kSPS provides sufficient speed for industrial monitoring, while the integrated voltage reference and oscillator simplify system design by reducing external precision components. Burnout-sensor detection helps identify sensor-loop failures, and the integrated temperature sensor supports thermal compensation.
The MCP3462 family uses integrated digital filtering to trade conversion speed against noise performance and resolution. Programmable data rates allow the system designer to select the required measurement bandwidth rather than operating continuously at the maximum 153.6 kSPS rate. The manufacturer identifies this R-series device as the preferred pin-compatible option for new designs because it includes the onboard voltage reference.
Typical uses include industrial process monitoring, battery and power-system measurements, environmental sensing, laboratory instrumentation, and multichannel sensor acquisition. The device can sample two differential sensors directly, including ratiometric bridges and transducers, while its burnout detection supports diagnostics for externally powered sensor circuits.
When assigning analog inputs, preserve the input-voltage limits and maintain a common reference or properly configured differential network. Place input and reference components close to the associated pins, keep sensitive analog routing away from switching-current paths, and follow the manufacturer pin-description table when completing PCB routing.
This product page combines the manufacturer family specifications, package information, lifecycle context, verified drop-in candidates, comparison parameters, and application-specific design guidance. It also identifies the differences among channel count, reference integration, temperature grade, and package configuration so engineers can select a replacement without relying on a functionally similar but board-incompatible part.
Drop-in-Alternativen für MCP3462RT-E/ST – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MCP3462RT-E/ST (gleiche Bauform und Footprint) – abweichend in Package, Internal Voltage Reference, Internal Oscillator, Operating Temperature Range, Analog Supply Voltage.
MCP3462R-E/ST
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MCP3462T-E/ST
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MCP3461RT-E/ST
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MCP3462-E/ST
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MCP3461T-E/ST
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MCP3462RT-E/ST Grenzwerte & elektrische Eigenschaften
| ADC Resolution | 16 bit |
| Conversion Architecture | Delta-sigma |
| Maximum Data Rate | 153.6 kSPS |
| Programmable Data Rate | Up to 153.6 kSPS |
| Input Configuration | 4 single-ended or 2 differential input channels |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Burnout Sensor Detection | Supported |
| Maximum Analog Input Voltage | 3.6 V |
| Maximum Linearity Error | 0.0032% |
| Nominal Supply Voltage | 3 V |
| Betriebstemperaturbereich | -40°C to +125°C |
| Gehäuse | 20-lead TSSOP |
| Montageart | Surface mount |
| Packaging | Tape and reel |
| RoHS-Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MCP3462RT-E/ST 20-lead tssop Pinbelegungsleitfaden
Pinbelegung für MCP3462RT-E/ST (20-lead tssop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für MCP3462RT-E/ST.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MCP3462RT-E/ST ist geeignet für 6 Anwendungs: Industrial Process Monitoring, Battery and Power-System Measurement, Environmental Sensor Acquisition, Laboratory Instrumentation, Medical and Diagnostic Monitoring, Data Acquisition and Control.
Industrial Process Monitoring
The MCP3462RT-E/ST is appropriate for process-monitoring systems that acquire two differential sensor signals while retaining a compact 20-lead TSSOP footprint. Its 16-bit resolution and programmable rate up to 153.6 kSPS support precise digital measurement, while the integrated reference, oscillator, and temperature sensor reduce support-component requirements. A factory data-acquisition board can configure the converter for the required measurement bandwidth, apply digital filtering, and compensate for temperature. The four single-ended or two differential input arrangement also allows redundant sensing when process reliability is more important than maximum conversion speed.
Empfohlen
Battery and Power-System Measurement
The MCP3462RT-E/ST can measure voltage, current, and temperature in battery-management or power-monitoring equipment. Its two differential inputs are useful for paired sensing, while four single-ended inputs provide additional observation points. The 16-bit conversion resolution preserves detail in low-range measurements, and the programmable rate up to 153.6 kSPS provides flexibility for dynamic system monitoring. Integrated voltage-reference and oscillator functions simplify the measurement chain, while burnout detection can identify open or failed sensor connections before they corrupt the reported system state.
Empfohlen
Environmental Sensor Acquisition
The MCP3462RT-E/ST is suitable for multi-sensor environmental measurement systems requiring more resolution than a conventional 12-bit converter. It can acquire four single-ended sensor outputs or two differential outputs at up to 153.6 kSPS, depending on the selected operating mode. The integrated temperature sensor assists with compensation when environmental drift matters, while burnout detection helps identify disconnected probes. Because the device supports programmable data rates, a design can reduce the rate when longer conversion time and lower filtered noise provide a better match to slowly changing temperature, humidity, or gas measurements.
Empfohlen
Laboratory Instrumentation
The MCP3462RT-E/ST fits laboratory instruments that require high-resolution measurement in a small circuit area. The 16-bit delta-sigma converter supports programmable rates up to 153.6 kSPS, allowing the instrument to balance sample throughput against noise filtering for different measurement modes. Two differential inputs can monitor a sensor bridge and reference channel, while the integrated temperature sensor supports compensation. Its 20-lead TSSOP package is compatible with the family configuration and helps engineers retain existing acquisition-board layouts when designing an instrument upgrade.
Empfohlen
Medical and Diagnostic Monitoring
The MCP3462RT-E/ST can serve as the measurement converter in compact diagnostic equipment when its electrical limits and application-specific validation satisfy the system requirements. Two differential analog channels support simultaneous acquisition of active sensors, and 16-bit resolution provides substantially more code levels than a lower-resolution ADC. The programmable rate up to 153.6 kSPS accommodates both slow physiological trends and faster sampled signals. Burnout-sensor detection adds useful fault information for externally powered sensor loops, but the complete medical system still requires appropriate isolation, protection, calibration, and regulatory validation.
Empfohlen
Data Acquisition and Control
The MCP3462RT-E/ST is appropriate for compact data-acquisition and embedded-control systems that need flexible sampling rates and multiple analog inputs. Four single-ended channels or two differential channels can be assigned to pressure, position, temperature, or control feedback signals. The 16-bit delta-sigma architecture produces filtered digital measurements, and the maximum 153.6 kSPS rate supports demanding control or monitoring loops. Designers should select a lower rate when lower noise is preferable, and use the family datasheet's digital-interface and pin-description tables when connecting the converter to a controller.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MCP3462RT-E/ST – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MCP3462R-E/ST | MCP3462T-E/ST | MCP3461RT-E/ST | MCP3462 | MCP3461T-E/ST |
|---|---|---|---|---|---|---|
| Package | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS |
| Differential Input Channels | 2 channels | 2 channels | 2 channels | 1 channel | 2 channels | 1 channel |
| Conversion Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
Wichtigste Unterscheidungsmerkmale
- Higher differential-channel count than the MCP3461 family options (vs. MCP3461RT-E/ST)
- Integrated voltage reference preserves a compact measurement chain (vs. MCP3462)
- Full R-series feature set with manufacturer-preferred family positioning (vs. MCP3462T-E/ST)
- Resolution and maximum rate match the leading MCP3462 alternatives (vs. MCP3462R-E/ST)
Designhinweise
Route the differential input pairs as tightly coupled traces where practical and keep them away from switching power paths and high-speed digital nets. Differential symmetry helps reject common-mode noise, while a quiet analog return path reduces conversion error. Place input-network components close to the converter pins and verify the complete input chain against the family datasheet's analog schematic before finalizing signal routing.
Use the manufacturer pin-description table to assign the 20 TSSOP leads, and maintain the exact package orientation marked on the PCB footprint. Keep the analog input and reference components on the same side of the board as the MCP3462RT-E/ST when possible. Provide local supply decoupling and route the digital interface away from sensitive analog inputs. A continuity and polarity check before power-on helps prevent incorrect board revisions from damaging the converter.
The nominal supply is 3 V, but every external input must remain within the specified analog-input limit of 3.6 V. Protect sensor inputs against transients and choose external component ratings appropriate for the maximum operating conditions. If a sensor can exceed the converter's input range, add clamping and series resistance before the ADC pins. Do not use the nominal supply rating as a substitute for the complete absolute-maximum ratings in the manufacturer datasheet.
The base MCP3462 and the R-series MCP3462 differ by onboard voltage-reference integration, so substituting by family name alone can alter the board's accuracy strategy and calibration procedure. Likewise, MCP3461 variants provide one fewer differential channel. Check the exact ordering suffix, temperature grade, reference configuration, interface behavior, and channel count before approving a replacement. Do not infer functionality from the TSSOP package alone.
Compliance-Informationen
The manufacturer documentation describes automotive suitability, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not established for the exact ordering code.