MCP3462RT-E/ST - 16-Bit Dual-Channel ADC | Microchip Technology
MPN: MCP3462RT-E/ST ✓ 啟用中MCP3462RT-E/ST 概覽
An ADC is a data-converter IC that converts an analog voltage into a digital value for processing, measurement, or control. Delta-sigma ADCs belong to the analog-to-digital converter hierarchy and use noise shaping plus digital filtering to obtain high resolution. The MCP3462RT-E/ST combines that architecture with programmable conversion rates, making it suitable for systems that need adjustable throughput and good DC measurement performance.
Its 16-bit resolution supports 65,536 digital code levels, while the two differential channels or four single-ended channels support redundant or multi-point measurements. The maximum programmable data rate of 153.6 kSPS provides sufficient speed for industrial monitoring, while the integrated voltage reference and oscillator simplify system design by reducing external precision components. Burnout-sensor detection helps identify sensor-loop failures, and the integrated temperature sensor supports thermal compensation.
The MCP3462 family uses integrated digital filtering to trade conversion speed against noise performance and resolution. Programmable data rates allow the system designer to select the required measurement bandwidth rather than operating continuously at the maximum 153.6 kSPS rate. The manufacturer identifies this R-series device as the preferred pin-compatible option for new designs because it includes the onboard voltage reference.
Typical uses include industrial process monitoring, battery and power-system measurements, environmental sensing, laboratory instrumentation, and multichannel sensor acquisition. The device can sample two differential sensors directly, including ratiometric bridges and transducers, while its burnout detection supports diagnostics for externally powered sensor circuits.
When assigning analog inputs, preserve the input-voltage limits and maintain a common reference or properly configured differential network. Place input and reference components close to the associated pins, keep sensitive analog routing away from switching-current paths, and follow the manufacturer pin-description table when completing PCB routing.
This product page combines the manufacturer family specifications, package information, lifecycle context, verified drop-in candidates, comparison parameters, and application-specific design guidance. It also identifies the differences among channel count, reference integration, temperature grade, and package configuration so engineers can select a replacement without relying on a functionally similar but board-incompatible part.
直接替換替代品,適用於 MCP3462RT-E/ST — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3462RT-E/ST (相同外形與佔位) — 差異在於 Package, Internal Voltage Reference, Internal Oscillator, Operating Temperature Range, Analog Supply Voltage.
MCP3462R-E/ST
✅ 直接替換聯絡詢價
查看資料表 →MCP3462T-E/ST
✅ 直接替換聯絡詢價
查看資料表 →MCP3461RT-E/ST
✅ 直接替換📋 參考替代品(不在目錄中)
MCP3462-E/ST
✅ 直接替換聯絡詢價
查看資料表 →MCP3461T-E/ST
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3462RT-E/ST 最大額定值與電氣特性
| ADC Resolution | 16 bit |
| Conversion Architecture | Delta-sigma |
| Maximum Data Rate | 153.6 kSPS |
| Programmable Data Rate | Up to 153.6 kSPS |
| Input Configuration | 4 single-ended or 2 differential input channels |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Burnout Sensor Detection | Supported |
| Maximum Analog Input Voltage | 3.6 V |
| Maximum Linearity Error | 0.0032% |
| Nominal Supply Voltage | 3 V |
| 工作溫度範圍 | -40°C to +125°C |
| 封裝 | 20-lead TSSOP |
| 安裝類型 | Surface mount |
| Packaging | Tape and reel |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MCP3462RT-E/ST 20-lead tssop 腳位配置指南
MCP3462RT-E/ST(20-lead tssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3462RT-E/ST.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3462RT-E/ST 適用於 6 應用s: Industrial Process Monitoring, Battery and Power-System Measurement, Environmental Sensor Acquisition, Laboratory Instrumentation, Medical and Diagnostic Monitoring, Data Acquisition and Control.
Industrial Process Monitoring
The MCP3462RT-E/ST is appropriate for process-monitoring systems that acquire two differential sensor signals while retaining a compact 20-lead TSSOP footprint. Its 16-bit resolution and programmable rate up to 153.6 kSPS support precise digital measurement, while the integrated reference, oscillator, and temperature sensor reduce support-component requirements. A factory data-acquisition board can configure the converter for the required measurement bandwidth, apply digital filtering, and compensate for temperature. The four single-ended or two differential input arrangement also allows redundant sensing when process reliability is more important than maximum conversion speed.
推薦
Battery and Power-System Measurement
The MCP3462RT-E/ST can measure voltage, current, and temperature in battery-management or power-monitoring equipment. Its two differential inputs are useful for paired sensing, while four single-ended inputs provide additional observation points. The 16-bit conversion resolution preserves detail in low-range measurements, and the programmable rate up to 153.6 kSPS provides flexibility for dynamic system monitoring. Integrated voltage-reference and oscillator functions simplify the measurement chain, while burnout detection can identify open or failed sensor connections before they corrupt the reported system state.
推薦
Environmental Sensor Acquisition
The MCP3462RT-E/ST is suitable for multi-sensor environmental measurement systems requiring more resolution than a conventional 12-bit converter. It can acquire four single-ended sensor outputs or two differential outputs at up to 153.6 kSPS, depending on the selected operating mode. The integrated temperature sensor assists with compensation when environmental drift matters, while burnout detection helps identify disconnected probes. Because the device supports programmable data rates, a design can reduce the rate when longer conversion time and lower filtered noise provide a better match to slowly changing temperature, humidity, or gas measurements.
推薦
Laboratory Instrumentation
The MCP3462RT-E/ST fits laboratory instruments that require high-resolution measurement in a small circuit area. The 16-bit delta-sigma converter supports programmable rates up to 153.6 kSPS, allowing the instrument to balance sample throughput against noise filtering for different measurement modes. Two differential inputs can monitor a sensor bridge and reference channel, while the integrated temperature sensor supports compensation. Its 20-lead TSSOP package is compatible with the family configuration and helps engineers retain existing acquisition-board layouts when designing an instrument upgrade.
推薦
Medical and Diagnostic Monitoring
The MCP3462RT-E/ST can serve as the measurement converter in compact diagnostic equipment when its electrical limits and application-specific validation satisfy the system requirements. Two differential analog channels support simultaneous acquisition of active sensors, and 16-bit resolution provides substantially more code levels than a lower-resolution ADC. The programmable rate up to 153.6 kSPS accommodates both slow physiological trends and faster sampled signals. Burnout-sensor detection adds useful fault information for externally powered sensor loops, but the complete medical system still requires appropriate isolation, protection, calibration, and regulatory validation.
推薦
Data Acquisition and Control
The MCP3462RT-E/ST is appropriate for compact data-acquisition and embedded-control systems that need flexible sampling rates and multiple analog inputs. Four single-ended channels or two differential channels can be assigned to pressure, position, temperature, or control feedback signals. The 16-bit delta-sigma architecture produces filtered digital measurements, and the maximum 153.6 kSPS rate supports demanding control or monitoring loops. Designers should select a lower rate when lower noise is preferable, and use the family datasheet's digital-interface and pin-description tables when connecting the converter to a controller.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3462RT-E/ST — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3462R-E/ST | MCP3462T-E/ST | MCP3461RT-E/ST | MCP3462 | MCP3461T-E/ST |
|---|---|---|---|---|---|---|
| Package | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS |
| Differential Input Channels | 2 channels | 2 channels | 2 channels | 1 channel | 2 channels | 1 channel |
| Conversion Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
主要差異化特點
- Higher differential-channel count than the MCP3461 family options (對比MCP3461RT-E/ST)
- Integrated voltage reference preserves a compact measurement chain (對比MCP3462)
- Full R-series feature set with manufacturer-preferred family positioning (對比MCP3462T-E/ST)
- Resolution and maximum rate match the leading MCP3462 alternatives (對比MCP3462R-E/ST)
設計說明
Route the differential input pairs as tightly coupled traces where practical and keep them away from switching power paths and high-speed digital nets. Differential symmetry helps reject common-mode noise, while a quiet analog return path reduces conversion error. Place input-network components close to the converter pins and verify the complete input chain against the family datasheet's analog schematic before finalizing signal routing.
Use the manufacturer pin-description table to assign the 20 TSSOP leads, and maintain the exact package orientation marked on the PCB footprint. Keep the analog input and reference components on the same side of the board as the MCP3462RT-E/ST when possible. Provide local supply decoupling and route the digital interface away from sensitive analog inputs. A continuity and polarity check before power-on helps prevent incorrect board revisions from damaging the converter.
The nominal supply is 3 V, but every external input must remain within the specified analog-input limit of 3.6 V. Protect sensor inputs against transients and choose external component ratings appropriate for the maximum operating conditions. If a sensor can exceed the converter's input range, add clamping and series resistance before the ADC pins. Do not use the nominal supply rating as a substitute for the complete absolute-maximum ratings in the manufacturer datasheet.
The base MCP3462 and the R-series MCP3462 differ by onboard voltage-reference integration, so substituting by family name alone can alter the board's accuracy strategy and calibration procedure. Likewise, MCP3461 variants provide one fewer differential channel. Check the exact ordering suffix, temperature grade, reference configuration, interface behavior, and channel count before approving a replacement. Do not infer functionality from the TSSOP package alone.
合規資訊
The manufacturer documentation describes automotive suitability, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not established for the exact ordering code.