Microchip Technology

MCP6002-E/MC - Dual 1MHz RRIO Op Amp | Microchip

Teilenummer: MCP6002-E/MC ✓ Aktiv
1.8 V to 6 V Vdss 100 microamperes Id 8-DFN, 2 x 3 x 0.9 mm with exposed pad Package
MOQ: 1 |

MCP6002-E/MC Übersicht

Microchip MCP6002-E/MC is a dual general-purpose operational amplifier with rail-to-rail input and output, a 1.8 V to 6 V operating range, and a typical gain-bandwidth product of 1 MHz. The device is supplied in an 8-lead DFN package measuring 2 x 3 x 0.9 mm with an exposed pad.

An operational amplifier, or op amp, is a voltage-gain component used to amplify small signals in analog and mixed-signal systems. The MCP6002 belongs to the broader operational-amplifier, analog-amplifier, semiconductor, and integrated-circuit hierarchies. Its two amplifiers share one package, allowing compact designs that require two independent signal channels, such as sensing, filtering, buffering, or gain stages.

The principal features include dual rail-to-rail input and output operation, a low 1.8 V minimum supply for portable and low-power systems, a 6 V maximum supply, 1 MHz typical gain-bandwidth product, and 100 microampere typical quiescent current. The E-grade ordering option is specified for extended-temperature operation, making the MCP6002-E/MC suitable for industrial and instrumented systems requiring operation beyond the standard commercial-temperature range.

The rail-to-rail input stage accepts signals extending toward the supply rails, while the rail-to-rail output stage can approach the output limits under suitable load and output-voltage conditions. This combination is useful in battery-powered instrumentation, sensor interfaces, and low-voltage control circuits where signal headroom is limited. The 1 MHz bandwidth favors low-frequency amplification, buffering, filtering, and general-purpose analog functions rather than high-speed signal processing.

Typical uses include two-channel sensor conditioning, active filtering, transimpedance stages, audio preamplification, voltage followers, and low-voltage data-acquisition systems. The dual configuration also reduces package count when two amplifiers are required, while the 100 microampere typical quiescent current helps limit standby consumption in battery-operated equipment.

Layout and stability remain the main design responsibilities. Place decoupling capacitors close to the supply pins, connect the exposed pad to the appropriate ground plane, and verify gain-bandwidth, output-load, and capacitive-load stability in the final circuit. The application circuit should also account for input and output common-mode limits, output-current capability, noise, and the transition into saturation near the supply rails.

This page combines manufacturer specifications, package details, sourcing information, strict drop-in alternatives, application guidance, and practical design notes to support component selection and PCB implementation.

Drop-in-Alternativen für MCP6002-E/MC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

MCP6002T-E/MC

✅ Drop-In
📦 8-DFN (2 x 3 mm)
Same MCP6002-E core ratings and 8-DFN footprint; T distinguishes tape-and-reel packing from tube packing.

📋 Referenzalternative (nicht im Katalog)

MCP6002-I/MC

✅ Drop-In
📦 8-DFN (2 x 3 mm)
Same dual 1.8 V, 1 MHz rail-to-rail amplifier platform; I differs from E in temperature-grade ordering.

📋 Referenzalternative (nicht im Katalog)

MCP6002-E/MCVAO

✅ Drop-In
📦 8-DFN (2 x 3 mm)
Same MCP6002-E core ratings and 8-DFN footprint; VAO is an additional manufacturer ordering designation.

📋 Referenzalternative (nicht im Katalog)

MCP6002-E/MC Grenzwerte & elektrische Eigenschaften

Number of Amplifiers 2
Product Type Dual general-purpose operational amplifier
Operating Voltage Range 1.8 V to 6 V
Typical Gain-Bandwidth Product 1 MHz
Typical Quiescent Current 100 microamperes
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Phase Margin 90 degrees typical
Temperature Grade E grade
Gehäuse 8-DFN, 2 x 3 x 0.9 mm with exposed pad
Lead Count 8
Montageart Surface mount
Packaging Form Tube
Number of Channels 2

MCP6002-E/MC 8-dfn, 2 x 3 x 0.9 mm with exposed pad Pinbelegungsleitfaden

Pinbelegung für MCP6002-E/MC (8-dfn, 2 x 3 x 0.9 mm with exposed pad-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für MCP6002-E/MC im 8-dfn, 2 x 3 x 0.9 mm with exposed pad-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MCP6002-E/MC.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MCP6002-E/MC ist geeignet für 6 Anwendungs: Battery-Powered Sensor Conditioning, Portable Medical Sensor Interface, Industrial Process-Control Amplifier, Active Audio Preamplification, Precision Voltage Reference Buffer, Low-Power Data Acquisition.

🧩

Battery-Powered Sensor Conditioning

The MCP6002-E/MC fits low-voltage sensor interfaces because both amplifiers operate from a 1.8 V to 6 V supply and provide rail-to-rail input and output behavior. The dual configuration can amplify or buffer one sensor signal while the second channel handles a reference or complementary measurement. Its 100 microampere typical quiescent current helps preserve battery life when the signal path is active, while the 1 MHz gain-bandwidth product is appropriate for sensors with modest bandwidth. The design must still account for sensor bias current, common-mode range, output loading, and the time required for the circuit to settle after power-up.

💊

Portable Medical Sensor Interface

MCP6002-E/MC is suitable for compact, low-voltage sensing stages where two analog channels and low supply current are required. Rail-to-rail inputs help retain signal headroom in instruments operating near the lower supply limit, while the dual E-grade package reduces component count on a constrained PCB. The 1 MHz bandwidth supports common slow biomedical signals and general-purpose analog conditioning rather than demanding high-speed acquisition. A medical design should additionally verify patient-safety isolation, leakage, protection-network design, and applicable medical-device requirements because those system-level requirements are outside the amplifier’s specified electrical performance.

🏭

Industrial Process-Control Amplifier

The dual MCP6002-E/MC can serve as the front-end amplifier in an industrial process-control signal chain that operates from low-voltage control rails. The E-grade ordering option targets extended-temperature applications, while rail-to-rail inputs and outputs support signals that approach the available supply range. One amplifier may condition a sensor input and the other may drive a buffered reference or active filter stage. Designers should provide input protection, account for noise and offset in precision measurements, and keep sensitive nodes away from switching converters and high-current return paths on the same board.

🎧

Active Audio Preamplification

MCP6002-E/MC can implement two independent low-frequency audio preamplifier or buffer channels in compact analog equipment. Its 1 MHz gain-bandwidth product is adequate for many microphone, line-level, headphone-driver, and tone-shaping circuits operating below the audio band. Rail-to-rail output increases useful signal range at low supply voltages, while the dual package simplifies balanced or dual-channel layouts. The audio application must consider input-noise density, distortion at the selected gain, output-current limits, and the load presented by the following stage; those characteristics should be taken from the manufacturer datasheet rather than inferred from bandwidth alone.

🔧

Precision Voltage Reference Buffer

The MCP6002-E/MC is useful for buffering a low-voltage reference because its rail-to-rail input accepts signals near the supply range and its rail-to-rail output can reproduce the reference with more usable output swing than a limited-range amplifier. The two channels can buffer a reference and a measured output, or form the two active elements of a differential circuit. For precision work, evaluate input offset, input bias, noise, stability, and load-current effects at the operating temperature. Decoupling and grounding should be arranged so that the reference node is not disturbed by output-current return paths.

📟

Low-Power Data Acquisition

MCP6002-E/MC fits a compact data-acquisition front end that needs two low-frequency analog channels without a high-speed amplifier or high supply current. It can amplify sensor outputs, provide gain, and drive an ADC input while the 1.8 V minimum supply supports low-energy portable systems. The 1 MHz gain-bandwidth product gives ample bandwidth for many temperature, pressure, position, and slowly varying process measurements, although the actual signal bandwidth and ADC settling requirements must be checked together. Add an anti-alias filter, maintain return-current separation between analog and digital sections, and verify the ADC input range against the amplifier’s rail-to-rail output limits.

What are the key specifications of MCP6002-E/MC that engineers should know?
The MCP6002-E/MC is a dual general-purpose operational amplifier with rail-to-rail input and output, a 1.8 V to 6 V supply range, typical 1 MHz gain-bandwidth product, and typical 100 microampere quiescent current. According to the Microchip MCP6002 product page, it is offered in an 8-lead DFN package. Its 90-degree typical phase margin also supports straightforward general-purpose amplifier design at low frequencies.
What is MCP6002-E/MC and what does it do?
The MCP6002-E/MC is a dual, general-purpose operational amplifier intended for low-voltage analog signal conditioning. It provides two rail-to-rail input and output amplifiers, 1.8 V to 6 V operation, 1 MHz typical gain-bandwidth product, and 100 microampere typical quiescent current. According to Microchip, its rail-to-rail characteristics improve usable signal headroom in compact, low-voltage systems.
What is the operating voltage of MCP6002-E/MC?
The MCP6002-E/MC operates from 1.8 V through 6 V. This range supports low-voltage portable systems, sensor circuits, and general-purpose analog designs without requiring a high supply voltage. According to the Microchip MCP6002 product page, rail-to-rail input and output operation is maintained across the stated 1.8 V to 6 V operating range, subject to the detailed load and common-mode limits in the manufacturer datasheet.
Where can I download the MCP6002 datasheet PDF?
The official MCP6002 datasheet and product documentation can be accessed through the Microchip MCP6002 product page at https://www.microchip.com/en-us/product/MCP6002. That page provides the manufacturer’s technical documentation for the dual op-amp family and the exact MCP6002-E/MC ordering option. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and connecting the exposed pad.
Where can I find the MCP6002 pinout and package information?
The MCP6002-E/MC uses an 8-lead DFN package measuring 2 x 3 x 0.9 mm with an exposed pad. The manufacturer product page is the authoritative starting point for package drawings and supporting documentation. A complete pin-name and numbering table is not reproduced on this page; use the pin-description table and land pattern in the Microchip MCP6002 datasheet before routing the board.
How much bandwidth and phase margin does MCP6002-E/MC provide?
The MCP6002-E/MC provides a typical 1 MHz gain-bandwidth product and 90-degree typical phase margin. These values make it suitable for low-frequency amplification, buffering, and filtering rather than high-speed waveform or video amplification. The MCP6002 family datasheet notes the 90-degree typical phase margin, while the Microchip product page identifies the 1 MHz typical gain-bandwidth product.
Is MCP6002-E/MC suitable for battery-powered sensor conditioning?
Yes, MCP6002-E/MC is suitable for many battery-powered sensor-conditioning circuits because it operates from 1.8 V and has 100 microampere typical quiescent current. Its dual rail-to-rail input and output configuration is useful when sensor signals occupy much of the available low-voltage range. Total system consumption still includes load current, bias current, and any external circuitry connected to the device.
What can replace MCP6002-E/MC with the same package and pinout?
MCP6002T-E/MC is the closest listed drop-in option because it retains the MCP6002-E electrical configuration in an 8-DFN package while using a different packing code. MCP6002-I/MC and MCP6002-E/MCVAO are additional same-family ordering options, but temperature grade, qualification, or packing details must be checked against the original assembly requirements. Confirm the final pinout and temperature grade against the manufacturer datasheet before substitution.
What is the best Microchip equivalent for MCP6002-E/MC?
The best same-family starting points are MCP6002T-E/MC, MCP6002-I/MC, and MCP6002-E/MCVAO because each is associated with the MCP6002 dual-amplifier family and the available package information. The exact interchangeability depends on whether the board requires tube packing, tape-and-reel packing, industrial temperature grading, or automotive qualification. MCP6002T-E/MC is the most direct option when only the packing method changes.
Is MCP6002-E/MC the same as MCP6002T-E/MC?
MCP6002-E/MC and MCP6002T-E/MC represent closely related MCP6002-E configurations in the 8-DFN package, with the T ordering code indicating tape-and-reel packing for the listed component. Their shared operating range, amplifier count, bandwidth, and rail-to-rail characteristics make the T version a strong board-level drop-in candidate. Verify the exact ordering code, temperature grade, exposed-pad layout, and reel orientation in the Microchip documentation.
When should I choose MCP6002-E/MC instead of MCP6002-I/MC?
Choose MCP6002-E/MC when the design requires the manufacturer’s E temperature-grade option, while MCP6002-I/MC corresponds to the I-grade ordering option. Both belong to the dual 1.8 V, 1 MHz, rail-to-rail MCP6002 family and use the listed 8-DFN format. The decision should be based on the required ambient-temperature range and qualification records, not merely on the similar gain and supply specifications.
What is the difference between MCP6002-E/MC and MCP6002-I/MC?
The principal documented distinction is the ordering temperature grade: MCP6002-E/MC is the E-grade option, while MCP6002-I/MC is the I-grade option. The MCP6002 family platform retains two amplifiers, rail-to-rail input and output, a 1.8 V to 6 V supply range, and 1 MHz typical gain-bandwidth product. Confirm the exact operating-temperature limits in the manufacturer datasheet before treating the two grades as interchangeable.
MCP6002-E/MC vs OPA2376AID — which is better for a low-voltage analog circuit?
MCP6002-E/MC is the safer board-level choice when the PCB is designed for its 8-DFN footprint. OPA2376AID appears in a same-family alternative list but is associated with an 8-lead SOIC package, so it is not a pin-compatible drop-in for the DFN land pattern. OPA2376AID may be relevant for a new SOIC design, but changing an existing MCP6002-E/MC board requires a package and pinout review.
Where to buy MCP6002-E/MC online?
Use the Request a Quote form on this page to request MCP6002-E/MC pricing, stock confirmation, lead time, and the required tube or reel packing. The linked manufacturer product page supports technical identification, while the form connects the request with XAIPART’s purchasing workflow. Include the 8-DFN package requirement, E-grade ordering code, and estimated annual quantity in the request.
How much does MCP6002-E/MC cost and what is its lead time?
Current unit pricing, stock status, and lead time should be obtained through the Request a Quote form on this page because commercial terms can change with quantity, packing, and market conditions. The form accepts the exact MCP6002-E/MC ordering code and can confirm the 8-DFN tube or tape-and-reel configuration. Add the target quantity, delivery location, and production schedule to obtain an actionable quotation.
Is MCP6002-E/MC in stock?
Stock for MCP6002-E/MC is confirmed through the Request a Quote form on this page rather than inferred from a distributor search result. Submit the exact MPN, required package and packing method, and projected quantity so the purchasing team can verify current availability. For production planning, request both the normal lead time and the earliest feasible delivery schedule.
What is the MCP6002 spice model and where can it be obtained?
The MCP6002 family is represented in the Microchip SPICE model library, which is the preferred source for a model matching the manufacturer’s published device behavior. Download the model from Microchip’s MCP6002 product resources and confirm that the selected model file corresponds to the MCP6002 dual amplifier. Simulation models may not reproduce every production tolerance, so validate critical offset, noise, and output-swing behavior on hardware.

Technische Referenzdaten für MCP6002-E/MC – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MCP6002-E/MC for a new dual general-purpose amplifier design requiring 1.8 V to 6 V operation, rail-to-rail input and output, 1 MHz typical gain-bandwidth product, and an E-grade ordering option in an 8-DFN package. MCP6002T-E/MC is the practical choice when the same electrical configuration is needed with tape-and-reel packing. Select MCP6002-I/MC only when the I-grade temperature designation matches the equipment requirements better than the E-grade option. MCP6002-E/MCVAO is relevant when the manufacturer’s VAO ordering designation matches qualification or purchasing requirements. Parts such as MCP602-I/SN, TLV2372ID, and OPA2376AID appear in alternative lists, but their SOIC packages do not replace the target DFN footprint without a PCB redesign. For every option, verify the pinout, exposed-pad land pattern, temperature limits, and loading behavior against the manufacturer datasheet.

Vergleich mit Alternativen

Parameter Dieses Produkt MCP6002T-E/MC MCP6002-I/MC MCP6002-E/MCVAO
Package 8-DFN (2 x 3 x 0.9 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Number of Amplifiers 2 2 2 2
Operating Voltage Range 1.8 V to 6 V 1.8 V to 6 V 1.8 V to 6 V 1.8 V to 6 V
Typical Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz
Typical Quiescent Current 100 microamperes 100 microamperes 100 microamperes 100 microamperes
Input Common-Mode Range Rail-to-rail input Rail-to-rail input Rail-to-rail input Rail-to-rail input
Output Swing Rail-to-rail output Rail-to-rail output Rail-to-rail output Rail-to-rail output
Temperature-Grade Designation E grade E grade I grade E grade with VAO ordering designation
Special Features Dual general-purpose amplifier Dual general-purpose amplifier; tape-and-reel ordering code Dual general-purpose amplifier; I-grade ordering code Dual general-purpose amplifier; VAO ordering designation

Wichtigste Unterscheidungsmerkmale

  • Dual amplifier in one compact DFN package (vs. MCP6002-I/MC)
  • Low-voltage rail-to-rail signal handling (vs. MCP6002-E/MCVAO)
  • Direct packing-option migration (vs. MCP6002T-E/MC)

Designhinweise

Place the supply bypass capacitor directly between the positive supply pin and ground pin, with a short, low-inductance return path. Connect the DFN exposed pad to the appropriate ground plane using the land pattern in the manufacturer package documentation. Keep the capacitor and exposed-pad vias close to the device because the 2 x 3 mm footprint leaves limited room for long routing. Verify the via count and antipad geometry against the recommended land pattern rather than using a generic DFN footprint.

Do not treat rail-to-rail input and output as unlimited. Check the input common-mode range, output swing, output-current capability, and load conditions for each supply voltage in the manufacturer datasheet. A 1.8 V supply leaves little voltage for internal headroom, especially when driving a load close to the rail. For gain stages above unity, include the amplifier’s finite gain-bandwidth and phase-margin characteristics in stability and settling calculations.

Route sensitive input nets away from power-supply switching nodes, high-current loads, and the exposed-pad current path. For dual-channel layouts, keep the two channels electrically isolated where crosstalk matters and avoid sharing narrow return-current segments beneath the DFN. If the circuit processes microvolt-level signals, use a quiet ground strategy, minimize leakage around high-impedance inputs, and consider guarding or shielding according to the enclosure and environmental conditions.

Estimated total supply current equals the MCP6002 quiescent current plus the current delivered to the load, plus current entering through the signal and feedback paths. Using the 100 microampere typical quiescent figure, the amplifier itself contributes about 0.1 mA before load current is added. This is an arithmetic operating-point check rather than a maximum-current specification; verify worst-case behavior using the minimum supply voltage, maximum temperature, output state, and load from the manufacturer datasheet.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit compliance declarations were identified in the cited product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with Microchip for the exact ordering code.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MCP6002 datasheet MCP6002 op amp MCP6002 pinout MCP6002 op amp datasheet MCP6002 spice model MCP6002 op amp schematic MCP6002 price MCP6002 equivalent MCP6002-E/MC datasheet pdf MCP6002-E/MC pinout MCP6002-E/MC price MCP6002-E/MC replacement MCP6002-E/MC vs MCP6002-I/MC Microchip MCP6002-E/MC

Verwandte Bauteile & Begriffe

Microchip Technology MCP6002-E/MC MCP6002T-E/MC MCP6002-I/MC MCP6002-E/MCVAO MCP602-I/SN TLV2372ID OPA2376AID operational amplifier dual op amp general-purpose amplifier rail-to-rail input rail-to-rail output gain-bandwidth product GBWP quiescent current common-mode range phase margin 8-DFN DFN package family surface-mount package exposed pad sensor conditioning active filtering battery-powered electronics
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen