MCP6002-E/MC - Dual 1MHz RRIO Op Amp | Microchip
Référence : MCP6002-E/MC ✓ ActifMCP6002-E/MC Présentation
An operational amplifier, or op amp, is a voltage-gain component used to amplify small signals in analog and mixed-signal systems. The MCP6002 belongs to the broader operational-amplifier, analog-amplifier, semiconductor, and integrated-circuit hierarchies. Its two amplifiers share one package, allowing compact designs that require two independent signal channels, such as sensing, filtering, buffering, or gain stages.
The principal features include dual rail-to-rail input and output operation, a low 1.8 V minimum supply for portable and low-power systems, a 6 V maximum supply, 1 MHz typical gain-bandwidth product, and 100 microampere typical quiescent current. The E-grade ordering option is specified for extended-temperature operation, making the MCP6002-E/MC suitable for industrial and instrumented systems requiring operation beyond the standard commercial-temperature range.
The rail-to-rail input stage accepts signals extending toward the supply rails, while the rail-to-rail output stage can approach the output limits under suitable load and output-voltage conditions. This combination is useful in battery-powered instrumentation, sensor interfaces, and low-voltage control circuits where signal headroom is limited. The 1 MHz bandwidth favors low-frequency amplification, buffering, filtering, and general-purpose analog functions rather than high-speed signal processing.
Typical uses include two-channel sensor conditioning, active filtering, transimpedance stages, audio preamplification, voltage followers, and low-voltage data-acquisition systems. The dual configuration also reduces package count when two amplifiers are required, while the 100 microampere typical quiescent current helps limit standby consumption in battery-operated equipment.
Layout and stability remain the main design responsibilities. Place decoupling capacitors close to the supply pins, connect the exposed pad to the appropriate ground plane, and verify gain-bandwidth, output-load, and capacitive-load stability in the final circuit. The application circuit should also account for input and output common-mode limits, output-current capability, noise, and the transition into saturation near the supply rails.
This page combines manufacturer specifications, package details, sourcing information, strict drop-in alternatives, application guidance, and practical design notes to support component selection and PCB implementation.
Alternatives de remplacement direct pour MCP6002-E/MC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
MCP6002T-E/MC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCP6002-I/MC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCP6002-E/MCVAO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCP6002-E/MC Valeurs maximales et caractéristiques électriques
| Number of Amplifiers | 2 |
| Product Type | Dual general-purpose operational amplifier |
| Operating Voltage Range | 1.8 V to 6 V |
| Typical Gain-Bandwidth Product | 1 MHz |
| Typical Quiescent Current | 100 microamperes |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Phase Margin | 90 degrees typical |
| Temperature Grade | E grade |
| Boîtier | 8-DFN, 2 x 3 x 0.9 mm with exposed pad |
| Lead Count | 8 |
| Type de montage | Surface mount |
| Packaging Form | Tube |
| Number of Channels | 2 |
Guide de configuration des broches du MCP6002-E/MC 8-dfn, 2 x 3 x 0.9 mm with exposed pad
Configuration des broches du MCP6002-E/MC (boîtier 8-dfn, 2 x 3 x 0.9 mm with exposed pad). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour MCP6002-E/MC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MCP6002-E/MC convient pour 6 applications: Battery-Powered Sensor Conditioning, Portable Medical Sensor Interface, Industrial Process-Control Amplifier, Active Audio Preamplification, Precision Voltage Reference Buffer, Low-Power Data Acquisition.
Battery-Powered Sensor Conditioning
The MCP6002-E/MC fits low-voltage sensor interfaces because both amplifiers operate from a 1.8 V to 6 V supply and provide rail-to-rail input and output behavior. The dual configuration can amplify or buffer one sensor signal while the second channel handles a reference or complementary measurement. Its 100 microampere typical quiescent current helps preserve battery life when the signal path is active, while the 1 MHz gain-bandwidth product is appropriate for sensors with modest bandwidth. The design must still account for sensor bias current, common-mode range, output loading, and the time required for the circuit to settle after power-up.
Portable Medical Sensor Interface
MCP6002-E/MC is suitable for compact, low-voltage sensing stages where two analog channels and low supply current are required. Rail-to-rail inputs help retain signal headroom in instruments operating near the lower supply limit, while the dual E-grade package reduces component count on a constrained PCB. The 1 MHz bandwidth supports common slow biomedical signals and general-purpose analog conditioning rather than demanding high-speed acquisition. A medical design should additionally verify patient-safety isolation, leakage, protection-network design, and applicable medical-device requirements because those system-level requirements are outside the amplifier’s specified electrical performance.
Industrial Process-Control Amplifier
The dual MCP6002-E/MC can serve as the front-end amplifier in an industrial process-control signal chain that operates from low-voltage control rails. The E-grade ordering option targets extended-temperature applications, while rail-to-rail inputs and outputs support signals that approach the available supply range. One amplifier may condition a sensor input and the other may drive a buffered reference or active filter stage. Designers should provide input protection, account for noise and offset in precision measurements, and keep sensitive nodes away from switching converters and high-current return paths on the same board.
Active Audio Preamplification
MCP6002-E/MC can implement two independent low-frequency audio preamplifier or buffer channels in compact analog equipment. Its 1 MHz gain-bandwidth product is adequate for many microphone, line-level, headphone-driver, and tone-shaping circuits operating below the audio band. Rail-to-rail output increases useful signal range at low supply voltages, while the dual package simplifies balanced or dual-channel layouts. The audio application must consider input-noise density, distortion at the selected gain, output-current limits, and the load presented by the following stage; those characteristics should be taken from the manufacturer datasheet rather than inferred from bandwidth alone.
Precision Voltage Reference Buffer
The MCP6002-E/MC is useful for buffering a low-voltage reference because its rail-to-rail input accepts signals near the supply range and its rail-to-rail output can reproduce the reference with more usable output swing than a limited-range amplifier. The two channels can buffer a reference and a measured output, or form the two active elements of a differential circuit. For precision work, evaluate input offset, input bias, noise, stability, and load-current effects at the operating temperature. Decoupling and grounding should be arranged so that the reference node is not disturbed by output-current return paths.
Low-Power Data Acquisition
MCP6002-E/MC fits a compact data-acquisition front end that needs two low-frequency analog channels without a high-speed amplifier or high supply current. It can amplify sensor outputs, provide gain, and drive an ADC input while the 1.8 V minimum supply supports low-energy portable systems. The 1 MHz gain-bandwidth product gives ample bandwidth for many temperature, pressure, position, and slowly varying process measurements, although the actual signal bandwidth and ADC settling requirements must be checked together. Add an anti-alias filter, maintain return-current separation between analog and digital sections, and verify the ADC input range against the amplifier’s rail-to-rail output limits.
Données de référence d'ingénierie pour MCP6002-E/MC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCP6002T-E/MC | MCP6002-I/MC | MCP6002-E/MCVAO |
|---|---|---|---|---|
| Package | 8-DFN (2 x 3 x 0.9 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Number of Amplifiers | 2 | 2 | 2 | 2 |
| Operating Voltage Range | 1.8 V to 6 V | 1.8 V to 6 V | 1.8 V to 6 V | 1.8 V to 6 V |
| Typical Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Typical Quiescent Current | 100 microamperes | 100 microamperes | 100 microamperes | 100 microamperes |
| Input Common-Mode Range | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input |
| Output Swing | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output |
| Temperature-Grade Designation | E grade | E grade | I grade | E grade with VAO ordering designation |
| Special Features | Dual general-purpose amplifier | Dual general-purpose amplifier; tape-and-reel ordering code | Dual general-purpose amplifier; I-grade ordering code | Dual general-purpose amplifier; VAO ordering designation |
Principaux différenciateurs
- Dual amplifier in one compact DFN package (vs MCP6002-I/MC)
- Low-voltage rail-to-rail signal handling (vs MCP6002-E/MCVAO)
- Direct packing-option migration (vs MCP6002T-E/MC)
Notes de conception
Place the supply bypass capacitor directly between the positive supply pin and ground pin, with a short, low-inductance return path. Connect the DFN exposed pad to the appropriate ground plane using the land pattern in the manufacturer package documentation. Keep the capacitor and exposed-pad vias close to the device because the 2 x 3 mm footprint leaves limited room for long routing. Verify the via count and antipad geometry against the recommended land pattern rather than using a generic DFN footprint.
Do not treat rail-to-rail input and output as unlimited. Check the input common-mode range, output swing, output-current capability, and load conditions for each supply voltage in the manufacturer datasheet. A 1.8 V supply leaves little voltage for internal headroom, especially when driving a load close to the rail. For gain stages above unity, include the amplifier’s finite gain-bandwidth and phase-margin characteristics in stability and settling calculations.
Route sensitive input nets away from power-supply switching nodes, high-current loads, and the exposed-pad current path. For dual-channel layouts, keep the two channels electrically isolated where crosstalk matters and avoid sharing narrow return-current segments beneath the DFN. If the circuit processes microvolt-level signals, use a quiet ground strategy, minimize leakage around high-impedance inputs, and consider guarding or shielding according to the enclosure and environmental conditions.
Estimated total supply current equals the MCP6002 quiescent current plus the current delivered to the load, plus current entering through the signal and feedback paths. Using the 100 microampere typical quiescent figure, the amplifier itself contributes about 0.1 mA before load current is added. This is an arithmetic operating-point check rather than a maximum-current specification; verify worst-case behavior using the minimum supply voltage, maximum temperature, output state, and load from the manufacturer datasheet.
Informations de conformité
No explicit compliance declarations were identified in the cited product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with Microchip for the exact ordering code.