Microchip Technology

MCP601T-I/OT - 2.8MHz RRO CMOS Op Amp | Microchip Technology

Teilenummer: MCP601T-I/OT ✓ Aktiv
Single supply Vdss 230 uA Id SOT-23-5 Package
MOQ: 1 |

MCP601T-I/OT Übersicht

The Microchip Technology MCP601T-I/OT is a single-circuit, rail-to-rail CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, typical operating current of 230 uA, and typical input offset voltage below 2 mV, housed in a 5-pin SOT-23 surface-mount package. It operates from a single 2.7 V to 6.0 V supply and combines low bias current with high operating speed.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The MCP601 belongs to the CMOS operational-amplifier hierarchy, where low power consumption and low input bias current support battery-powered and high-impedance signal chains. Its rail-to-rail output stage allows the output voltage to approach the supply rails, improving useful signal range in low-voltage systems.

Three headline characteristics define the MCP601T-I/OT: its 2.8 MHz gain-bandwidth product supports higher-frequency closed-loop operation than very-low-bandwidth amplifiers, its 230 uA typical operating current suits low-power designs, and its offset voltage of less than 2 mV limits systematic input-referred error. The device uses Microchip advanced CMOS technology and provides rail-to-rail output swing, low bias current, high open-loop gain, and high speed.

Because the gain-bandwidth product is 2.8 MHz, the amplifier is most appropriate for low-to-moderate frequency precision signal paths rather than high-speed video or RF tasks. Closed-loop bandwidth depends on the selected noise-gain topology; for example, a non-inverting amplifier configured for 10-times gain has a much lower usable bandwidth than a unity-gain configuration. Input offset, bias current, output swing, supply voltage, and stability determine practical precision.

Typical uses include low-power sensor conditioning, portable instrumentation, audio preamplification, active filtering, and general-purpose analog signal processing. The single 2.7 V to 6.0 V supply range makes the device suitable for systems using 3.3 V or 5 V rails. Its low operating current is beneficial in battery-operated equipment where every milliampere affects operating time.

When laying out the PCB, keep the op-amp input pins away from switching nodes, high-current traces, and digital clock lines. Place input and feedback components close to their associated pins, use a solid ground reference, and follow the stability and decoupling recommendations in the manufacturer documentation. The unused supply pin must be connected to the appropriate supply or ground potential rather than left floating.

This product page combines the manufacturer specifications with package, application, replacement, and design guidance. It also distinguishes the industrial-temperature MCP601T-I/OT from other mechanically related variants, helping engineers identify a valid board-level replacement without confusing package compatibility with functional equivalence.

Drop-in-Alternativen für MCP601T-I/OT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

MCP601T-E/OT

✅ Drop-In
📦 SOT-23-5
Uses the same SOT-23-5 footprint and MCP601 family configuration; the verified difference is the E-grade temperature designation versus the target I-grade designation, with the exact temperature-limit difference requiring confirmation.

📋 Referenzalternative (nicht im Katalog)

MCP601T-I/OT Grenzwerte & elektrische Eigenschaften

Device Type Single operational amplifier
Product Classification General-purpose amplifier
Technology CMOS
Supply Configuration Single supply
Supply Voltage Range 2.7 V to 6.0 V
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Typical Input Offset Voltage Less than 2 mV
Output Swing Rail-to-rail
Number of Circuits 1 circuit
Gehäuse SOT-23-5
Montageart Surface mount
Packaging Tape and reel
AEC-Q100 Qualification Not applicable

MCP601T-I/OT sot-23-5 Pinbelegungsleitfaden

Pinbelegung für MCP601T-I/OT (sot-23-5-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für MCP601T-I/OT im sot-23-5-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MCP601T-I/OT.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MCP601T-I/OT ist geeignet für 6 Anwendungs: Low-Power Sensor Signal Conditioning, Portable Medical Monitoring, Audio Preamplification, Active Filtering and Control, Portable Test and Measurement, IoT Sensor Interface.

🧩

Low-Power Sensor Signal Conditioning

The MCP601T-I/OT is well suited to conditioning signals from high-impedance sensors because its CMOS architecture provides low bias current and its typical operating current is only 230 uA. Place it in a non-inverting or differential conditioning stage operating from a 2.7 V to 6.0 V rail, with the sensor return tied to the circuit reference. The 2.8 MHz gain-bandwidth product permits useful closed-loop bandwidth beyond very-low-frequency conditions, while less than 2 mV typical offset limits input-referred error. A rail-to-rail output also increases usable signal swing near the supply limit.

💊

Portable Medical Monitoring

The MCP601T-I/OT can form the input amplifier of a compact, battery-operated monitoring module when the design requires low power and modest signal bandwidth. Its 230 uA typical operating current supports longer operating intervals, while the single 2.7 V to 6.0 V supply range accommodates portable 3.3 V architectures. Use a low-noise reference and properly grounded sensor interface to preserve the benefit of less than 2 mV typical input offset. The 2.8 MHz gain-bandwidth product is appropriate for physiological signals and slow sensor outputs rather than high-bandwidth diagnostic front ends.

🎧

Audio Preamplification

The MCP601T-I/OT can amplify microphone or line-level signals in a compact audio preamplifier when the operating bandwidth is modest. Its 2.8 MHz gain-bandwidth product is much greater than the bandwidth of most audio-band signals, and its rail-to-rail output increases available swing from a 3.3 V or 5 V supply. Typical operating current of 230 uA helps when the audio circuit operates continuously from a limited power budget. Keep the input return path short, provide stable feedback compensation, and avoid routing the microphone input beside switching regulators or digital timing signals.

🏭

Active Filtering and Control

The MCP601T-I/OT is appropriate for first-order or low-order active filters used in sensor and control systems. Its 2.8 MHz gain-bandwidth product leaves bandwidth margin above audio-band and low-frequency process-control signals, while the rail-to-rail output can feed another stage without immediately saturating near the supply rail. Select passive-component tolerances that match the required filter accuracy because amplifier offset and bias current also influence low-frequency behavior. Verify closed-loop stability for each noninverting or inverting gain setting before increasing signal bandwidth.

🔧

Portable Test and Measurement

The MCP601T-I/OT can serve as a general-purpose amplifier in a handheld meter, programmable sensor interface, or low-speed data-acquisition front end. Its 2.8 MHz gain-bandwidth product supports measurement signals beyond DC, and the less-than-2-mV typical offset is useful when resolving small inputs. The 230 uA typical operating current helps constrain battery demand, while operation from a single 2.7 V to 6.0 V supply simplifies portable power design. Place the amplifier near the input connector, maintain a low-impedance reference, and isolate analog traces from switching-converter paths.

🌐

IoT Sensor Interface

The MCP601T-I/OT is useful between an IoT sensor and a low-voltage controller when the sensor output requires buffering or gain. Its low bias current reduces loading on high-impedance sensing elements, and the 2.8 MHz gain-bandwidth product is more than sufficient for common temperature, light, pressure, and occupancy sensors. A 3.3 V supply keeps the operating range aligned with many wireless systems, while rail-to-rail output improves utilization of the controller's analog input range. Use short traces, a continuous ground reference, and filtering near the sensor connector to minimize environmental noise pickup.

Zusammenfassung der empfohlenen Produkte

MCP601T-I/OT Microchip Technology Verwendet in: Low-Power Sensor Signal Conditioning, Portable Medical Monitoring, Audio Preamplification, Active Filtering and Control, Portable Test and Measurement, IoT Sensor Interface MCP6001T-I/OTVAO Low-power CMOS amplifier family option Verwendet in: Low-Power Sensor Signal Conditioning, Audio Preamplification, Portable Test and Measurement MCP601T-E/OT Same-family package-compatible option Verwendet in: Portable Medical Monitoring, Active Filtering and Control, IoT Sensor Interface
What are the key specifications of MCP601T-I/OT that engineers should know?
The MCP601T-I/OT is a single CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, less than 2 mV typical input offset voltage, and rail-to-rail output swing. According to the Microchip Technology product page, it operates from a single 2.7 V to 6.0 V supply and is packaged in SOT-23-5. These characteristics position it as a low-power general-purpose amplifier for 3.3 V and 5 V analog signal chains.
What is the operating voltage of MCP601T-I/OT?
The MCP601T-I/OT operates from 2.7 V to 6.0 V using a single supply. The 2.7 V lower limit permits operation from standard 3.3 V rails, while the 6.0 V upper limit supports conventional 5 V systems. According to the Microchip Technology product page, its 230 uA typical operating current makes it practical for low-power portable equipment. Input and output voltages must remain within the device's specified common-mode and output-swing limits.
What is the gain-bandwidth product of MCP601T-I/OT?
The MCP601T-I/OT has a gain-bandwidth product of 2.8 MHz. According to the Microchip Technology product page, this bandwidth supports low-to-moderate-frequency closed-loop operation while retaining low power consumption. The usable closed-loop bandwidth depends on circuit gain: higher noise gain reduces bandwidth, whereas a unity-gain buffer provides the highest operating range. It is therefore not intended to replace dedicated high-speed video or RF amplifiers.
Is MCP601T-I/OT suitable for battery-powered sensor conditioning?
The MCP601T-I/OT is suitable for many battery-powered sensor-conditioning circuits because its typical operating current is 230 uA and its single-supply range starts at 2.7 V. Its CMOS technology provides low bias current, while the rail-to-rail output improves signal range in low-voltage systems. According to the Microchip Technology product page, the device also has less than 2 mV typical offset. Actual battery life depends on the complete circuit, operating duty cycle, and load.
Where can I download the MCP601T-I/OT datasheet PDF?
The MCP601T-I/OT datasheet and technical documentation are accessed through the Microchip Technology MCP601 product page listed on this page. The manufacturer page identifies the amplifier as a 2.8 MHz, 230 uA, rail-to-rail-output CMOS device with less than 2 mV typical offset. Use the manufacturer documentation for the complete electrical characteristics, pin descriptions, typical application circuits, and ordering information.
Where can I find the MCP601T-I/OT pinout?
Use the pin-description table and package drawing in the Microchip Technology MCP601 documentation to assign the five SOT-23-5 connections. The manufacturer package information should be treated as the controlling reference for signal, supply, and exposed-ground assignments. PCB designers should also check the package drawing for orientation, lead pitch, and recommended land pattern rather than inferring pin positions from a generic SOT-23-5 drawing.
MCP601T-I/OT vs MCP601T-E/OT: which version is the better replacement?
The MCP601T-E/OT is the close mechanical and functional alternative to the MCP601T-I/OT because both use the SOT-23-5 package and belong to the MCP601 family. Selection should depend on the required ambient-temperature grade rather than basic amplifier function. According to the manufacturer product information, the target provides 2.8 MHz gain bandwidth, 230 uA typical current, and rail-to-rail output; confirm the exact grade limits before substituting an E-grade device into an industrial-temperature design.
When should I choose MCP601T-I/OT over MCP601T-E/OT?
Choose the MCP601T-I/OT when the design requires the industrial-temperature ordering option and the MCP601T-E/OT temperature grade does not satisfy the worst-case ambient requirement. Both parts use the SOT-23-5 footprint and provide the target family's 2.8 MHz gain-bandwidth product and rail-to-rail output. Confirm operating-temperature limits, production status, and every ordering suffix in the Microchip documentation before making the substitution.
What is the best drop-in replacement for MCP601T-I/OT?
The best verified drop-in replacement is the MCP601T-E/OT because it retains the SOT-23-5 package and MCP601 family configuration. The verified replacement record does not establish enough pin-compatible alternatives with fully comparable temperature, voltage, offset, bandwidth, and current ratings to recommend additional drop-ins confidently. Treat package-identical parts from unrelated amplifier families as candidates only after checking every pin function, electrical limit, stability requirement, and temperature grade.
Can MCP6001 replace MCP601T-I/OT on the same PCB?
The MCP6001 family should not be treated as an automatic drop-in replacement for the MCP601T-I/OT without a complete electrical review. The comparison references identify MCP6001 variants, but the verified information does not establish that their bandwidth, offset, operating current, and temperature ratings remain within the required drop-in threshold. Because the MCP601T-I/OT has a 2.8 MHz gain-bandwidth product and the replacement data does not confirm equivalent performance, preserve the original footprint and qualify any proposed substitute explicitly.
What is the best equivalent for MCP601T-I/OT?
No cross-brand equivalent can be recommended from the verified replacement records because none is identified with a confirmed SOT-23-5 pinout and quantified electrical match. The MCP601T-E/OT is the supported same-manufacturer choice when its temperature grade is acceptable. For another manufacturer, require evidence of the same five-pin configuration, 2.7 V to 6.0 V supply compatibility, output-swing behavior, offset, bias current, bandwidth, stability, and environmental requirements.
Where to buy MCP601T-I/OT online?
Use the Request a Quote form on this page to request MCP601T-I/OT availability, unit pricing, minimum order quantity, and lead time. The manufacturer product page and authorized distribution records confirm the MCP601T-I/OT ordering code, SOT-23-5 package, and tape-and-reel format. Current commercial terms can change, so a quotation should state the exact MPN, quantity, and delivery destination rather than relying on an undated historical price.
What is the price of MCP601T-I/OT?
Current MCP601T-I/OT pricing depends on quantity, package suffix, order quantity, and delivery terms. Request a quote through the Request a Quote form on this page to receive the applicable unit price and commercial conditions. The product is the tape-and-reel MCP601T-I/OT ordering code, not the MCP601T-E/OT or an MCP6001 variant, so include the complete suffix when requesting pricing.
What is the lead time for MCP601T-I/OT?
Current lead time and stock should be confirmed through the Request a Quote form on this page by entering the exact MCP601T-I/OT MPN and required quantity. Lead time can vary with order size, manufacturing status, packaging format, and shipment destination. The manufacturer product page identifies the component, while the SOT-23-5 tape-and-reel ordering information confirms the intended commercial configuration for quotation.
What design details matter when using MCP601T-I/OT?
The MCP601T-I/OT requires careful grounding, short feedback paths, and separation from noisy switching circuitry. According to the Microchip Technology product page, the device supplies 2.8 MHz gain bandwidth from a 2.7 V to 6.0 V single supply while consuming 230 uA typically. Place compensation and feedback components close to their pins, connect the unused supply terminal as specified, verify common-mode limits, and confirm stability for the selected closed-loop gain.
Is MCP601T-I/OT compliant with RoHS and REACH?
RoHS and REACH status must be confirmed for the exact production configuration through Microchip Technology's material-compliance documentation. The manufacturer identifies MCP601T-I/OT as a general-purpose single CMOS operational amplifier in SOT-23-5, but the verified product information does not state those material-compliance results. Therefore, neither standard should be assumed; request the current declaration or product-material documentation before using the part in a compliance-controlled design.

Technische Referenzdaten für MCP601T-I/OT – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MCP601T-I/OT for a compact 3.3 V or 5 V analog system that needs a single general-purpose CMOS amplifier, moderate bandwidth, low bias current, and low operating power. Its 2.8 MHz gain-bandwidth product, 230 uA typical current, less-than-2-mV typical offset, and rail-to-rail output make it suitable for sensor conditioning, audio preamplification, filtering, portable instrumentation, and low-speed acquisition. Select the MCP601T-E/OT when its temperature grade satisfies the installation environment and the same MCP601 family behavior is desired in the identical SOT-23-5 footprint. Do not select an MCP6001-family device solely from its similar low-power description: confirm gain bandwidth, offset, current, rail-to-rail behavior, stability, and temperature limits against the system requirements. For a cross-brand replacement, require a documented pin-for-pin match and quantified electrical equivalence rather than treating package similarity as sufficient.

Vergleich mit Alternativen

Parameter Dieses Produkt MCP601T-E/OT
Manufacturer Microchip Technology Microchip Technology
Package SOT-23-5 SOT-23-5
Device Type Single CMOS operational amplifier Single general-purpose amplifier
Packaging Tape and reel Tape and reel

Wichtigste Unterscheidungsmerkmale

  • Low-power single-supply operation (vs. MCP601T-E/OT)
  • Industrial-grade ordering option (vs. MCP601T-E/OT)
  • Compact five-pin analog interface (vs. MCP601T-E/OT)

Designhinweise

Place the MCP601T-I/OT close to the signal source and place feedback components directly between the input and output pins. Keep the ground return beneath the device continuous, avoid split-plane transitions beneath the amplifier, and place supply bypass capacitance at the power pin. Sensitive input traces should remain short and should not run parallel to switching-node, inductor, or high-current return paths.

Choose the closed-loop gain with the 2.8 MHz gain-bandwidth product in mind. Higher noise gain reduces usable bandwidth and can change stability requirements, particularly when driving capacitive loads. If the amplifier drives a cable, ADC input, or other capacitive network, add an isolation resistor close to the output and verify stability experimentally. Do not assume that the rail-to-rail output stage can drive arbitrary capacitive loads without added damping.

Decouple the 2.7 V to 6.0 V supply locally and account for the amplifier's 230 uA typical operating current plus signal-dependent current. Use the manufacturer's recommended bypass capacitance and connection layout, and keep analog and switching regulators physically separated where possible. The less-than-2-mV typical input offset improves signal accuracy, but that performance is retained only when the input reference and return paths are quiet and properly conditioned.

Do not confuse package compatibility with complete substitute qualification. The MCP601T-E/OT shares the SOT-23-5 format and MCP601 family identity, but the ordering-grade temperature difference must be checked against the design's worst-case ambient conditions. Before fitting any alternative, verify input and supply pin positions, common-mode range, output swing, offset, bias current, bandwidth, operating current, stability, and exposed-pad or thermal requirements.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Material-compliance declarations are not stated in the manufacturer product information for this ordering code. AEC-Q100 is not applicable to this general-purpose amplifier.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

mcp601t-i/ot datasheet mcp601t datasheet MCP601T-I/OT pinout MCP601T-I/OT datasheet pdf MCP601T-I/OT specifications MCP601T-I/OT SOT-23-5 MCP601T-I/OT drop-in replacement MCP601T-I/OT equivalent amplifier MCP601T-I/OT vs MCP601T-E/OT Microchip MCP601T-I/OT MCP601T-I/OT price MCP601T-I/OT stock MCP601T-I/OT sensor amplifier MCP601T-I/OT 2.8MHz amplifier MCP601T-I/OT application circuit

Verwandte Bauteile & Begriffe

Microchip Technology MCP601 MCP601T-I/OT MCP601T-E/OT MCP6001T-I/OTVAO operational amplifier op amp CMOS operational amplifier analog integrated circuit semiconductor single-supply amplifier rail-to-rail output gain-bandwidth product input offset voltage input bias current quiescent current SOT-23-5 SOT-23 package family surface-mount package SMD low-power electronics sensor conditioning audio preamplification active filter industrial temperature grade
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen