MM610X-001 - Wi-Fi HaLow Sub-GHz IoT Module | AsiaRF
Teilenummer: MM610X-001 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.8 | $118,00 |
| 100 | $10.9 | $1.090,00 |
| 500 | $9.95 | $4.975,00 |
| 1.000 | $9.2 | $9.200,00 |
MM610X-001 Übersicht
Wi-Fi HaLow is a low-power, long-range version of the IEEE 802.11 Wi-Fi standard, defined by the IEEE 802.11ah amendment. As a member of the wireless module family within RF modules and wireless connectivity semiconductors, it offloads the entire RF PHY and MAC from a host processor, exposing a simple digital interface to system designers.
Key features include long-range sub-1 GHz connectivity that reaches approximately 10 times the distance and 100 times the area of traditional 2.4 GHz Wi-Fi, low power consumption optimized for battery-powered IoT nodes, and broad regulatory certification. According to Morse Micro, the MM610X-001 carries broader regulatory certification than any other module in the AsiaRF Wi-Fi HaLow range, allowing a single hardware design to ship to more export markets without board respins.
The module integrates the MM6108 RF SOC, which implements the full 802.11ah protocol stack. Host connectivity is versatile: the module connects over UART, SDIO, SPI, or I2C, giving designers freedom to match it to low-end MCUs or Linux-class application processors. Community-documented bring-ups include Raspberry Pi 5 integration using Morse Micro MM610x software release packages under mainline Linux kernels.
Typical applications include smart city infrastructure, security cameras and surveillance over long distances, industrial sensor networks, agricultural monitoring, and utility metering - scenarios where thousands of devices must connect securely through a single access point over kilometer-scale links.
Design consideration: because HaLow operates in sub-GHz spectrum, antenna choice and regulatory region selection (channel plan) directly affect range and throughput; plan the U.FL antenna placement and verify the target market's certified band before production. Note the module requires a host driver stack from Morse Micro - budget integration time for the target OS.
This page synthesizes distributor listings, manufacturer datasheets, regulatory information, and drop-in alternative analysis not found on any single source, providing a complete engineering view of the MM610X-001 for sourcing and design decisions.
Drop-in-Alternativen für MM610X-001 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernMM610X-001 Spezifikationen (herstellerveröffentlicht)
| Product Type | Wi-Fi HaLow Sub-GHz wireless module |
| RF SOC | Morse Micro MM6108 |
| Wireless Standard | IEEE 802.11ah (Wi-Fi HaLow) |
| Frequency Band | Sub-1 GHz (below 1 GHz) |
| Host Interfaces | UART, SDIO, SPI, I2C |
| Antenna Connector | U.FL (external antenna) |
| Gehäuse | LGA-42 |
| Montageart | Surface Mount (stamp module) |
| Range vs 2.4 GHz Wi-Fi | Approx. 10x distance / 100x area (per AsiaRF) |
| Typical Applications | IoT, smart city, surveillance, metering |
| Regulatory Certification | Broader certification than any other AsiaRF HaLow module (per Morse Micro); FCC ID TKZ-MM610X-001 |
| RoHS-Status | Compliant (per JLCPCB listing) |
MM610X-001 Schnittstellen & Anschlüsse
MM610X-001 bietet die folgenden, vom Hersteller veröffentlichten Schnittstellen und Anschlüsse: Funk. Pinbelegung der Erweiterungsheader, Nummerierung der Anschlüsse und elektrische Grenzwerte sind in der Herstellerdokumentation definiert.
| Funk | IEEE 802.11ah (Wi-Fi HaLow) |
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Typische Anwendungen
MM610X-001 ist geeignet für 6 Anwendungs: Smart City and Streetlight Networks, Security Cameras and Surveillance, Industrial IoT and Sensor Networks, Smart Utility Metering, Agricultural Monitoring, Embedded Linux / Raspberry Pi Prototyping.
Smart City and Streetlight Networks
Smart city deployments must connect thousands of lamps, controllers, and environmental sensors across multi-kilometer urban footprints. The MM610X-001 fits this requirement because IEEE 802.11ah in sub-1 GHz spectrum delivers roughly 10 times the distance and 100 times the area coverage of 2.4 GHz Wi-Fi, allowing a single HaLow access point to serve an entire district. The module's MM6108 SOC handles the full 802.11ah MAC/PHY, while UART or SPI links the host MCU to the network. Because HaLow is a standards-based Wi-Fi extension, nodes roam and associate through standard security mechanisms rather than proprietary protocols. Performance consideration: sub-GHz channels carry less bandwidth than 2.4 GHz, so aggregate node traffic should be planned within HaLow channel capacity, and the U.FL external antenna should be placed for line-of-sight to the gateway.
Empfohlen
Security Cameras and Surveillance
Long-range wireless video is a flagship Wi-Fi HaLow use case because sub-GHz propagation penetrates walls and terrain obstructions far better than 2.4 GHz. The MM610X-001 suits IP camera designs that must stream video across large perimeters - parking facilities, farms, industrial yards - where conventional Wi-Fi would need multiple repeaters. Its SDIO interface supports direct connection to camera SoCs, while its 802.11ah link sustains the moderate, sustained throughput that compressed video requires. According to AsiaRF, HaLow connects thousands of devices securely via a single access point, which simplifies multi-camera site architecture. Design consideration: verify end-to-end bitrate against the selected HaLow channel bandwidth and MCS setting, and position the U.FL antenna clear of the camera enclosure's metal structures to preserve link margin at range.
Empfohlen
Industrial IoT and Sensor Networks
Factories, tank farms, and utility yards need sensor connectivity that spans buildings and metal-dense environments where 2.4 GHz fades quickly. The MM610X-001 addresses this with sub-1 GHz 802.11ah links that maintain connectivity at distances conventional Wi-Fi cannot reach, while the module's low-power operation suits both mains-powered controllers and battery-backed sensor nodes. Host integration is flexible: SPI for resource-constrained sensor MCUs, UART for gateway bridges, or SDIO for Linux-based edge controllers. Because HaLow is a Wi-Fi standard, existing IP-based plant software and security tooling apply without protocol translation. Performance consideration: in high-EMI industrial sites, route the U.FL antenna to a position outside shielded cabinets and validate retry rates under full plant RF load before scaling the deployment.
Empfohlen
Smart Utility Metering
Utility metering - electricity, water, gas - requires thousands of endpoints reporting periodically across entire neighborhoods, a topology the MM610X-001 serves directly. Wi-Fi HaLow's 802.11ah MAC is explicitly designed for massive station counts per access point and for power-sipping battery devices that sleep between reporting intervals, aligning with the module's low-power sub-GHz radio. The I2C and SPI interfaces allow connection to metering microcontrollers, and the standards-based security model supports OTA credential provisioning at scale. AsiaRF's broad regulatory certification on this module is particularly valuable for metering products sold across multiple export regions, since a single hardware build can pass several national sub-GHz channel plans. Design consideration: size the battery against the module's sleep-state current profile and define realistic report intervals before finalizing the power budget.
Empfohlen
Agricultural Monitoring
Farms and ranches cover areas where cellular backhaul is expensive and 2.4 GHz Wi-Fi cannot span field distances. The MM610X-001 provides kilometer-scale 802.11ah connectivity from field sensors - soil moisture, weather stations, gate and pump controllers - back to a single farm-gateway access point, avoiding per-node cellular subscriptions. Its sub-GHz radio propagates effectively over open terrain and crops, and per AsiaRF, HaLow reaches roughly 10 times the distance of traditional Wi-Fi with 100 times the coverage area. The UART interface suits low-power sensor MCUs, and the U.FL connector accepts weatherproof external antennas on masts. Performance consideration: line-of-sight deployment of the gateway antenna dramatically extends range in flat terrain; plan nodes within validated link budgets from the datasheet range figures rather than assuming uniform coverage.
Empfohlen
Embedded Linux / Raspberry Pi Prototyping
Developers evaluating Wi-Fi HaLow can integrate the MM610X-001 directly with Linux single-board computers. Morse Micro's community documents a working bring-up on the Raspberry Pi 5 using the MM610x Software Release Package 1.12.4 under Debian 12 with kernel 6.6.51, demonstrating that the module operates over SDIO with mainline-class kernels. This makes the MM610X-001 a practical prototyping path: the same module validated on the dev board moves into the production carrier PCB without an RF redesign, thanks to its LGA-42 stamp footprint and U.FL antenna interface. Performance consideration: confirm the Morse Micro software release version supports your target kernel, as driver releases lag kernel updates; allocate integration time for device-tree and regulatory-domain configuration during the port.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MM610X-001 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Package | LGA-42 stamp module |
| Brand | AsiaRF |
| Wireless Standard | IEEE 802.11ah (Wi-Fi HaLow) |
| RF SOC | Morse Micro MM6108 |
| Frequency Band | Sub-1 GHz |
| Host Interfaces | UART, SDIO, SPI, I2C |
| Antenna | U.FL external connector |
| Regulatory Certification | FCC ID TKZ-MM610X-001; broadest in AsiaRF HaLow range |
Wichtigste Unterscheidungsmerkmale
- Broadest regulatory certification in the AsiaRF HaLow range (vs. Other AsiaRF Wi-Fi HaLow modules (per Morse Micro statement))
- Four host interface options on one module (vs. SDIO-only Wi-Fi modules (e.g., AW7603-S class parts))
- Standards-based IEEE 802.11ah ecosystem (vs. Proprietary sub-GHz radio solutions)
Designhinweise
The MM610X-001 outputs RF through a U.FL connector, so antenna selection and placement define real-world range. Use a sub-GHz antenna rated for your certified HaLow channel plan and route the U.FL-to-SMA pigtail away from switching regulators and high-speed digital traces. Keep a clearance zone around the radiator of at least a few centimeters from metal and ground planes. Because HaLow links are planned at kilometer scale, even 2-3 dB of mismatch loss meaningfully erodes link margin - verify antenna VSWR on the final assembly, not just the reference design.
As an LGA-42 stamp module, the MM610X-001 mounts on castellated pads on the carrier PCB. Follow the pad layout exactly as defined in the AsiaRF datasheet (Datasheet_MM610X-001_V2_EN) - do not scale or hand-modify the land pattern. Place host-interface traces (SDIO, SPI, UART, I2C) with series termination consideration for SDIO clock rates, and keep the module's power pins decoupled per the datasheet recommendation. Confirm the approved footprint against the latest datasheet revision before tape-out, since V2 revised the earlier V2231004 document.
The module requires the Morse Micro MM610x software driver package on the host; hardware integration alone does not produce a working link. Community bring-ups (Raspberry Pi 5, Debian 12, kernel 6.6.51, MM610x release 1.12.4) show this works but also reveal version-sensitivity between driver releases and kernels. Additionally, regulatory-domain and channel-plan configuration are software tasks: configure the certified band for your target market before field trials, since out-of-region channels may be disabled by certification constraints and will silently limit performance.
Compliance-Informationen
RoHS compliance stated in JLCPCB part listing. FCC certified under ID TKZ-MM610X-001 per FCC equipment authorization. Other compliance attributes not stated in provided data.
