MOS6581 - 3-Voice FM Synthesizer Sound Chip | Commodore MOS | C64 Audio
Teilenummer: MOS6581 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $89 | $89,00 |
| 10 | $75 | $750,00 |
| 100 | $62 | $6.200,00 |
| 500 | $55 | $27.500,00 |
| 1.000 | $48 | $48.000,00 |
MOS6581 Übersicht
A sound chip (or programmable sound generator, PSG) is a dedicated semiconductor that synthesizes audio under CPU control, sitting between the system bus and the analog output stage. SID belongs to the family of analog synthesis ICs - alongside later digital successors such as the Yamaha YM2149 and General Instrument AY-3-8910 - and is notable for being one of the first single-chip devices to combine subtractive synthesis (oscillators + filter) with programmable waveforms in a consumer computer.
Key features of the MOS6581 include three independent voices each offering four selectable waveforms (triangle, sawtooth, variable-pulse, and noise), a 12-bit frequency resolution per voice, a global 4-bit volume control with four volume modes, and three analog filter modes (low-pass, high-pass, band-pass, plus notch combinations). The chip's signature warm, slightly distorted sound comes from its analog filter, which has become a defining audio characteristic of the Commodore 64 and a sought-after timbre in chiptune and electronic music production.
Typical applications include the original Commodore 64/128 sound subsystem, chiptune music hardware and software synthesizers, retro-computing restoration boards, MIDI-to-SID adapter projects, and educational tools for teaching subtractive synthesis. Modern FPGA implementations such as those in the MiSTer platform reproduce the analog behavior bit-true, while the ARMSID and SIDKick Pico devices provide plug-compatible physical replacements.
When designing with the MOS6581, engineers must consider that it draws power directly from the host computer's 5V and 12V rails and produces significant analog heat during operation. Replacement or refurbishment boards such as ARMSID and SIDKick Pico offer lower noise and modern reliability while retaining register-level compatibility with the original chip.
Drop-in-Alternativen für MOS6581 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MOS8580
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ARMSID
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SIDKick Pico
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
Nano SwinSID
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SwinSID Nano
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MOS6581 Technische Daten
| Manufacturer | Commodore Semiconductor Group (MOS Technology) |
| Part Number | MOS6581 (SID - Sound Interface Device) |
| Architecture | NMOS, analog subtractive synthesis |
| Voices | 3 independent oscillators |
| Waveforms per Voice | Triangle, Sawtooth, Variable Pulse, Noise |
| Frequency Resolution | 12-bit per voice (0 to ~4000 Hz) |
| Envelope Generators | 3 ADSR (Attack, Decay, Sustain, Release) |
| Filter Modes | Low-pass, High-pass, Band-pass, Notch |
| Filter Cutoff Frequency | 8-bit programmable (0-255) |
| Filter Resonance | 4-bit programmable (Q 0-15) |
| Volume Control | 4-bit global (0-15) with 4 modulation modes |
| Register File | 29 x 8-bit registers, memory-mapped |
| Host Bus Compatibility | 65XX / 68XX family |
| Versorgungsspannung | 5 V (digital) / 9-12 V (analog VDD) |
| Gehäuse | DIP-28 (ceramic and plastic variants) |
| Original Application | Commodore 64 / 128 audio subsystem |
| Original Release Date | January 1982 |
| RoHS-Status | Non-compliant (pre-RoHS design, 1981 vintage) |
MOS6581 Pin-Konfiguration
| Pin 1 | VCC — Digital +5 V supply |
| Pin 2 | RD — Read strobe (active low, 65XX bus) |
| Pin 3 | WR — Write strobe (active low, 65XX bus) |
| Pin 4 | CS — Chip select (active low) |
| Pin 5 | A0 — Register address bit 0 |
| Pin 6 | A1 — Register address bit 1 |
| Pin 7 | A2 — Register address bit 2 |
| Pin 8 | A3 — Register address bit 3 |
| Pin 9 | A4 — Register address bit 4 |
| Pin 10 | GND — Digital ground |
| Pin 11 | D0 — Data bus bit 0 |
| Pin 12 | D1 — Data bus bit 1 |
| Pin 13 | D2 — Data bus bit 2 |
| Pin 14 | D3 — Data bus bit 3 |
| Pin 15 | D4 — Data bus bit 4 |
| Pin 16 | D5 — Data bus bit 5 |
| Pin 17 | D6 — Data bus bit 6 |
| Pin 18 | D7 — Data bus bit 7 |
| Pin 19 | CAP1A — Filter capacitor 1A |
| Pin 20 | CAP1B — Filter capacitor 1B |
| Pin 21 | CAP2A — Filter capacitor 2A |
| Pin 22 | CAP2B — Filter capacitor 2B |
| Pin 23 | VCC_ANA — Analog +5 V supply (filtered) |
| Pin 24 | POTX — Paddle port X (potentiometer input) |
| Pin 25 | POTY — Paddle port Y (potentiometer input) |
| Pin 26 | POTVOICE — Paddle voice select / ext in |
| Pin 27 | AUDIO — Analog audio output |
| Pin 28 | VDD — Analog +12 V supply |
Typische Anwendungen
MOS6581 ist geeignet für 6 Anwendungs: Commodore 64 Audio Subsystem, Chiptune Music Synthesis, Retro Computing Restoration, MIDI to SID Adapter Projects, Educational Subtractive Synthesis, Vintage Sound Module Integration.
Commodore 64 Audio Subsystem
The MOS6581 was designed as the dedicated audio processor for the original Commodore 64 'breadbin' and early C64C motherboards, where it occupies addresses $D400-$D41F in the system memory map and is read/written by the 6510 CPU. Its three voices drive the SID music playback in commercial games, while the analog resonant filter shapes bass and percussion tones. Authentic restorations preserve the original chip signature; reliability-focused builds now substitute ARMSID or SIDKick Pico plug-in modules.
Empfohlen
Chiptune Music Synthesis
Modern chiptune composers prize the MOS6581 for its distinctive warm, slightly saturated analog character that cannot be replicated by digital synthesis. Each of the three voices supports triangle, sawtooth, variable-pulse, and noise waveforms with 12-bit pitch resolution, while the shared multimode filter (LP/HP/BP/notch) adds analog harmonic shaping. Producers either sample original hardware, use the FPGASID bit-true clone, or play back through modern register-compatible modules such as the ARMSID that retain the original signal path while lowering supply noise.
Empfohlen
Retro Computing Restoration
Vintage C64 and C128 boards with failed SID chips are routinely restored using MOS6581 NOS (new old stock) parts or modern functional replacements such as ARMSID, SIDKick Pico, or SwinSID Nano that share the original DIP-28 socket footprint. Each replacement module implements the same 29-register memory-mapped interface so existing game and demo software runs unmodified. The original MOS6581 mask revisions (R2-R5) differ in filter behavior; restorers often select revisions to match the host board revision.
Empfohlen
MIDI to SID Adapter Projects
Hobbyist MIDI-to-SID adapters such as the ARMSID, SIDKick Pico, and various open-source MIDI-SID bridges use the MOS6581 register interface to convert incoming MIDI note, velocity, and CC messages into SID voice parameters. The chip's three-voice polyphony matches three independent MIDI channels, while its programmable filter cutoff and resonance map cleanly to filter-cutoff and resonance CC numbers. The same plug-and-play module approach is used to drive external SID chips from modern USB-MIDI controllers.
Empfohlen
Educational Subtractive Synthesis
The MOS6581 is widely used in university electronics and computer-music courses as a concrete, register-level example of subtractive synthesis: the student programs raw oscillator waveforms and shapes them with the shared analog filter and per-voice ADSR envelopes. Its 29-register memory map is small enough to teach in a single lab session yet rich enough to demonstrate real-world analog audio signal chains including DC offset, supply-rail coupling, and resonance self-oscillation. Modern FPGA and micro reproductions extend the same teaching model to boards that have no surviving MOS6581 hardware.
Empfohlen
Vintage Sound Module Integration
Modular synthesizer and Eurorack builders embed the MOS6581 in standalone sound modules driven by MIDI, USB, or CV/gate interfaces. The chip's analog audio outputs feed directly into mixer stages, while its 5 V and 12 V supply requirement matches typical synthesizer power buses. Modern retro modules such as the CRE8 audio cartridge and various Cheri-style SID synths continue to use genuine NOS MOS6581 chips or register-compatible drop-in modules, exposing original SID parameters as patch points on the front panel.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MOS6581 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MOS8580 | ARMSID | SIDKick Pico | Nano SwinSID | SwinSID Nano |
|---|---|---|---|---|---|---|
| Package | DIP-28 | DIP-28 (same) | DIP-28 module (same socket) | DIP-28 module (same socket) | DIP-28 module (same socket) | DIP-28 module (same socket) |
| Brand | Commodore Semiconductor (MOS Technology) | Commodore Semiconductor | nobomi.cz | frntc / americanretro.shop | hackup / Tolaemon | retrofletch |
| Voices | 3 | 3 | 3 | 3 (plus FM/MIDI expansion) | 3 | 3 |
| Waveforms per Voice | Triangle / Saw / Pulse / Noise | Triangle / Saw / Pulse / Noise | Triangle / Saw / Pulse / Noise (emulated) | Triangle / Saw / Pulse / Noise (emulated) | Triangle / Saw / Pulse / Noise (emulated) | Triangle / Saw / Pulse / Noise (emulated) |
| Filter Modes | LP / HP / BP / Notch | LP / HP / BP / Notch (cleaner) | LP / HP / BP / Notch (emulated) | LP / HP / BP / Notch (emulated) | LP / HP / BP / Notch (partial) | LP / HP / BP / Notch (partial) |
| Supply Voltage | 5 V digital / 12 V analog | 5 V / 9 V (single 9 V revision) | 5 V only (on-board regulators) | 5 V via USB | 5 V only | 5 V only |
| Output Noise Floor | Higher (analog NMOS) | Medium (cleaner than 6581) | Low (modern design) | Low (modern design) | Medium | Medium |
| Lifecycle Status | Obsolete (1982-1990s) | Obsolete (1985-1990s) | Active (modern production) | Active (modern production) | Active (hobby) | Active (hobby) |
| Approx. Street Price (USD, 2026) | $50-$150 (NOS used) | $40-$120 (NOS used) | $50-$70 (new) | $40-$55 (new) | $25-$45 (new) | $25-$40 (new) |
Wichtigste Unterscheidungsmerkmale
- Original warm analog filter character (vs. MOS8580)
- Authentic vintage collector value (vs. ARMSID)
- No external microcontroller or firmware required (vs. FPGASID)
Designhinweise
Estimated: the MOS6581 requires both a clean digital +5 V rail and an analog +12 V supply (later C64C boards substituted 9 V). Decouple the VDD analog rail with at least 10 uF electrolytic plus 100 nF ceramic close to the chip, and isolate it from digital VCC with a ferrite bead or LC filter to prevent digital switching noise from coupling into the audio output. The chip draws approximately 100-200 mW total, so thermal management is not a concern at room temperature.
Keep the AUDIO output (pin 27) trace away from the digital data bus (pins 11-18) and the CS/RD/WR strobe lines to minimize crosstalk. Route the analog ground separately back to a star-ground point near the chip's GND pin; do not share a single ground pour between the analog output stage and the digital bus driver circuits. Place the external filter capacitors (CAP1A, CAP1B, CAP2A, CAP2B on pins 19-22) as close to the package as possible to avoid parasitic resistance that detunes the filter cutoff.
Do not assume MOS6581 and MOS8580 are interchangeable without code review: the 8580 reset register location and a few filter-mode bits differ, and the 6581's analog filter exhibits DC offset that some titles compensate for. Also note that paddle inputs (POTX/POTY/POTVOICE on pins 24-26) are sampled via an internal capacitor-charge circuit; long cables and high humidity can cause erroneous readings in original C64 boards.
The MOS6581's 8-bit data bus (D0-D7 on pins 11-18) is TTL-compatible and shares the 65XX bus with the VIC-II video chip and CIA I/O controllers. Add 3.3 kohm pull-ups on each data line if driving from a modern FPGA or microcontroller host at 3.3 V CMOS levels, since the 6581's input high threshold is around 2.0 V and floating inputs can register as false writes. The CS/RD/WR strobes are active-low; ensure they are de-asserted before the next address transition to avoid spurious register writes.
Compliance-Informationen
The MOS6581 predates the RoHS directive (2006) and uses a tin-lead solder finish; it is non-RoHS-compliant by design. No AEC-Q100 automotive qualification is available or applicable for this consumer-audio IC.
