Texas Instruments

MSP430I2041TPW - 16-Bit Mixed-Signal MCU | Texas Instruments

Teilenummer: MSP430I2041TPW ✓ Aktiv
28-pin TSSOP (PW) Package 16.384 MHz Speed 32 KB Memory
MOQ: 1 |

MSP430I2041TPW Übersicht

Texas Instruments MSP430I2041TPW is a 16-bit mixed-signal microcontroller with four 24-bit sigma-delta ADCs, two 16-bit timers, 32 KB Flash memory, and 2 KB RAM in a 28-pin TSSOP package. It operates at up to 16.384 MHz and targets precision metering, industrial monitoring, and portable battery-powered measurement systems.

A mixed-signal microcontroller combines a digital processor with analog measurement peripherals on one integrated circuit. In the device hierarchy, the MSP430I2041TPW is a microcontroller, a mixed-signal MCU, and an energy-efficient embedded processing platform. Its sigma-delta ADC channels can acquire low-frequency analog signals, while the 16-bit RISC CPU performs control, calibration, data processing, and communication tasks without requiring separate analog and processing components.

Four 24-bit sigma-delta ADCs provide the principal measurement channels. Two 16-bit timers support timing and periodic event generation, while 32 KB Flash stores firmware and 2 KB RAM supports working data. The 16.384 MHz maximum operating frequency provides processing headroom for metrology algorithms, while five low-power modes make the device suitable for battery-operated instruments that spend substantial time between measurements.

The MSP430 architecture emphasizes efficient embedded control and low standby consumption. Its mixed-signal resources are intended for metering applications in which several analog inputs must be measured accurately and handled locally. The integrated device can consolidate functions that otherwise require separate ADCs, timers, memory, and control logic, reducing board area and simplifying firmware coordination of the measurement chain.

Typical uses include energy meters, industrial process monitors, portable instrumentation, environmental sensing, and battery-powered data loggers. Its four ADC channels are particularly useful for multi-channel sensing, while local 16-bit processing can calculate measurements before transmitting compact results to a host. The TSSOP package also supports conventional surface-mount assembly rather than requiring a large through-hole footprint.

When designing a board, pay particular attention to analog grounding, reference voltage stability, input filtering, and separation between sensitive measurement traces and switching or digital return currents. Confirm the complete 28-pin signal assignment against the manufacturer pin description table before routing the PCB, and review the recommended external-component values and calibration sequence in the manufacturer datasheet.

This page organizes the MSP430I2041TPW’s key measurements, memory configuration, application fit, and replacement considerations into an engineering-oriented guide. It also highlights where family alternatives differ in ADC count and memory so that PCB reuse decisions are based on actual peripheral requirements rather than package similarity alone.

Drop-in-Alternativen für MSP430I2041TPW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MSP430I2041TPW (gleiche Bauform und Footprint) – abweichend in Flash Memory, Low-Power Modes, Number of ADCs, Package, RAM.

Texas Instruments
Flash Memory: 32KB (32K x 8)
Low-Power Modes: 5 low-power modes
Number of ADCs: 3
Vergleichen mit MSP430I2041TPW →

MSP430I2031TPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 28-pin TSSOP (PW)
16-bit RISC CPU (MSP430 CPU16) · 16.384 MHz · 32KB (32K x 8) · 2KB · 24-bit sigma-delta (SD24) · 3 · 2 x 16-bit · -40C to +105C

Preis auf Anfrage

Datenblatt ansehen →

MSP430I2021TPW

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 28-pin TSSOP (PW)
Uses 1 ADC channel instead of 4, a 75% reduction in ADC count; exact memory and pin-level differences require datasheet confirmation.

📋 Referenzalternative (nicht im Katalog)

MSP430I2041TPW Grenzwerte & elektrische Eigenschaften

CPU Architecture 16-bit RISC
Maximale Taktfrequenz 16.384 MHz
Nominal Processor Frequency 16 MHz
ADC Architecture 24-bit sigma-delta
Number of ADCs 4 channels
Number of Timers 2 timers
Timer Resolution 16-bit
Flash Memory 32 KB
RAM 2 KB
Low-Power Modes 5 modes
Betriebstemperaturbereich -40°C to +105°C
Temperature Grade Industrial
Gehäuse 28-pin TSSOP (PW)
Anzahl der Pins 28 pins
Montageart Surface mount
Product Type Mixed-signal microcontroller
Application Portfolio Metrology and monitoring
RoHS-Status unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

MSP430I2041TPW 28-pin tssop (pw) Pinbelegungsleitfaden

Pinbelegung für MSP430I2041TPW (28-pin tssop (pw)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MSP430I2041TPW im 28-pin tssop (pw)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MSP430I2041TPW.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MSP430I2041TPW ist geeignet für 6 Anwendungs: Smart Energy Metering, Industrial Process Monitoring, Battery-Powered Data Logger, Portable Environmental Monitor, Precision Instrumentation, Condition Monitoring Controller.

⚡

Smart Energy Metering

The MSP430I2041TPW fits smart energy metering because its four 24-bit sigma-delta ADCs can acquire several low-frequency voltage or current-derived signals while the 16-bit CPU performs local calculation. Two 16-bit timers provide timing references for measurement intervals, and the 32 KB Flash accommodates metering and communication firmware. The 16.384 MHz maximum clock supports local processing without requiring a separate host during each measurement cycle. A production design should use isolated sensing front ends, precision references, and the manufacturer’s calibration procedure rather than routing raw line voltage directly into the MCU.

🏭

Industrial Process Monitoring

For industrial process monitoring, the MSP430I2041TPW can combine four analog measurement channels, two 16-bit timers, and local control logic in one 28-pin TSSOP device. The four 24-bit sigma-delta converters suit slowly changing signals such as temperature, pressure, level, and analog transducer outputs. Its five low-power modes allow a monitor to wake, sample, calculate, and report while reducing energy use between updates. The industrial -40°C to +105°C rating supports controlled factory equipment, although protection, isolation, EMC filtering, and hazardous-area requirements must be handled at the board and enclosure levels.

🧩

Battery-Powered Data Logger

The MSP430I2041TPW is suitable for a battery-powered data logger that periodically records multiple analog measurements. Four 24-bit sigma-delta ADCs reduce the number of separate converters, while 2 KB RAM provides space for working samples and a 16-bit processor handles scaling and local filtering. The five low-power modes help separate long idle periods from measurement activity. System-level battery life still depends on sensor current, reference circuitry, regulator quiescent current, wake interval, and the transmission technology, so the complete power budget should be calculated with the selected sensor and radio rather than the MCU alone.

🧩

Portable Environmental Monitor

The MSP430I2041TPW supports compact environmental instruments that combine several slow sensor outputs in a battery-powered enclosure. Its four 24-bit sigma-delta ADCs can sample temperature, humidity, light, and gas-sensor interfaces with a common digital measurement architecture, while 32 KB Flash holds application and logging firmware. Two 16-bit timers can coordinate sampling and maintenance intervals, and the five low-power modes enable duty-cycled operation. Sensor-specific excitation, filtering, calibration, and compensation remain external analog functions that must be designed around the ADC reference and input limits in the manufacturer datasheet.

🔧

Precision Instrumentation

The MSP430I2041TPW is appropriate for portable precision instruments requiring several channels and local numeric processing. Four 24-bit sigma-delta ADCs provide high-resolution acquisition, the 16.384 MHz maximum clock supports filtering and compensation, and two 16-bit timers can synchronize sampling with external test sequences. The 28-pin TSSOP package allows the mixed-signal subsystem to fit boards that also contain precision analog front ends. For laboratory-grade accuracy, follow the manufacturer’s grounding and reference recommendations, maintain clean supply paths, and treat calibration data storage and drift compensation as part of the measurement system design.

🏭

Condition Monitoring Controller

The MSP430I2041TPW can act as the measurement controller in condition-monitoring equipment for motors, pumps, machinery, and remote assets. Four analog channels can receive sensor signals associated with vibration envelopes, temperature, pressure, or current, while two timers establish sampling windows and periodic updates. The 16-bit processor performs local filtering and threshold logic before forwarding results, and the five low-power modes help manage energy in remotely installed equipment. The analog front end must provide appropriate anti-aliasing, protection, excitation, and isolation because the MCU’s sigma-delta inputs are intended to work with carefully conditioned analog signals.

Zusammenfassung der empfohlenen Produkte

MSP430I2041TPWR Tape-and-reel ordering option for automated assembly Verwendet in: Smart Energy Metering, Battery-Powered Data Logger, Portable Environmental Monitor, Condition Monitoring Controller MSP430I2031TPW Lower-channel-count family option for simpler meters Verwendet in: Smart Energy Metering, Industrial Process Monitoring, Battery-Powered Data Logger, Precision Instrumentation, Condition Monitoring Controller MSP430I2021TPW Family option for single-channel monitoring Verwendet in: Industrial Process Monitoring, Portable Environmental Monitor, Precision Instrumentation
What is the operating voltage of MSP430I2041TPW?
The MSP430I2041TPW operates from the supply range specified in the Texas Instruments MSP430I2041 datasheet. The manufacturer identifies the device as a 16 MHz mixed-signal metering MCU with four 24-bit sigma-delta ADCs, two 16-bit timers, 32 KB Flash, and 2 KB RAM. Use the datasheet’s device pin and recommended operating conditions tables to confirm the exact supply limits, ADC reference limits, and decoupling requirements for the selected design.
What are the key specifications of MSP430I2041TPW that engineers should know?
The MSP430I2041TPW combines four 24-bit sigma-delta ADCs with a 16-bit RISC CPU operating up to 16.384 MHz. It includes two 16-bit timers, 32 KB Flash, 2 KB RAM, five low-power modes, and a 28-pin TSSOP package. According to the Texas Instruments MSP430I2041 product documentation, its metrology and monitoring focus supports energy measurement, industrial sensing, and portable battery-powered instruments.
Where can I download the MSP430I2041TPW datasheet PDF?
The official MSP430I2041 datasheet is available through the Texas Instruments product page and the manufacturer’s literature link for MSP430I2041. It documents the mixed-signal architecture, four 24-bit sigma-delta ADCs, memory, timers, low-power behavior, electrical limits, and package information. Use the manufacturer document for the authoritative pin descriptions and recommended application circuit rather than relying on distributor summaries.
Where can I find the MSP430I2041TPW pinout?
The MSP430I2041TPW pinout is documented in the Texas Instruments MSP430I2041 datasheet and the product page for the PW package option. The device uses a 28-pin TSSOP package. Assign every PCB connection from the manufacturer’s pin-description table, including analog inputs, references, ground, supply, clock, programming, and reset functions; do not infer unused analog pins from the four-channel ADC headline specification.
How does the MSP430I2041TPW compare with MSP430I2031TPW?
The MSP430I2041TPW provides four 24-bit sigma-delta ADC channels, while the MSP430I2031 belongs to the same MSP430 mixed-signal family with fewer metering channels. Both are positioned for low-power metrology and monitoring, but the exact peripheral population determines pin compatibility and firmware support. Treat the I2031 as a family alternative rather than an automatic drop-in replacement until every PW-package pin and ADC channel has been checked.
When should I choose MSP430I2041TPW over MSP430I2021TPW?
Choose the MSP430I2041TPW when a design needs four 24-bit sigma-delta measurement channels, two 16-bit timers, 32 KB Flash, and 2 KB RAM in a 28-pin TSSOP. The MSP430I2021 provides a lower-channel-count option within the same mixed-signal portfolio. The I2041 is preferable when concurrent analog inputs and additional processing resources justify the higher peripheral complexity.
Is MSP430I2041TPW suitable for energy metering?
Yes, the MSP430I2041TPW is designed for metrology and monitoring, with four 24-bit sigma-delta ADCs, two 16-bit timers, 32 KB Flash, and 2 KB RAM. These resources support multi-channel signal acquisition, timing, calibration, and local calculation. For a production meter, follow the manufacturer’s input-conditioning, reference, grounding, calibration, and safety-isolation guidance rather than treating the MCU as a standalone measurement solution.
What can replace the MSP430I2041TPW?
The closest family replacements to consider are the MSP430I2031TPW and MSP430I2021TPW, but neither should be treated as an unconditional drop-in replacement. The MSP430I2041TPW provides four 24-bit sigma-delta ADCs, and reducing the ADC count can change the usable pin assignments. A valid replacement requires equal package dimensions, matching power, ground, programming, clock, and communication pins, plus any analog pins used by the original design.
Can an MSP430I2031TPW replace an MSP430I2041TPW?
The MSP430I2031TPW can be considered only after a complete pin and peripheral audit. It belongs to the same Texas Instruments mixed-signal MCU family and uses a comparable PW-package offering, but the MSP430I2041TPW has four ADC channels while the I2031 has fewer. Existing boards that use all four measurement channels will not be electrically equivalent without confirming that the replacement supports every connected signal.
Is MSP430I2041TPW the same as MSP430I2041TPWR?
No, MSP430I2041TPW and MSP430I2041TPWR refer to different orderable packing arrangements of the MSP430I2041 device, not different functional alternatives. The TPWR suffix identifies the tape-and-reel ordering option, while MSP430I2041TPW identifies the base TPW orderable designation. For a redesign, verify the manufacturer ordering information for mechanical handling, quantity, and marking requirements.
What is the best cross-brand equivalent for MSP430I2041TPW?
No cross-brand drop-in equivalent is established for the MSP430I2041TPW. Its value depends on a specific combination of four 24-bit sigma-delta ADCs, 32 KB Flash, 2 KB RAM, two 16-bit timers, a 16.384 MHz maximum clock, low-power operation, and a 28-pin TSSOP footprint. A competitor device with a similar clock or package would still require ADC architecture, pinout, firmware, accuracy, and lifecycle validation.
Where can I buy MSP430I2041TPW online?
Use the Request a Quote form on this page to request MSP430I2041TPW availability, current lead time, and order quantity. The part is an industrial-temperature MSP430 mixed-signal MCU in the PW 28-pin TSSOP package. The manufacturer product page lists the exact ordering option and package information, allowing procurement to confirm the required suffix before placing an order.
What is the price of MSP430I2041TPW?
Use the Request a Quote form on this page for the current MSP430I2041TPW price and quantity schedule. Pricing can vary with order quantity, packing option, market availability, and component lifecycle status. The manufacturer part number MSP430I2041TPW should be stated on the request so that the quotation is tied to the exact 28-pin PW device rather than a related family member.
What is the lead time for MSP430I2041TPW?
Request the current MSP430I2041TPW lead time through the Request a Quote form on this page. Lead time depends on confirmed manufacturer inventory, production scheduling, package quantity, and the required delivery destination. Texas Instruments lists MSP430I2041TPW as an industrial-temperature PW option with a specified operating range of -40°C to +105°C.
Is MSP430I2041TPW in stock?
Use the Request a Quote form on this page to request a stock confirmation for MSP430I2041TPW. Inventory status changes with order quantity and packing, so a generic listing statement should not be treated as a firm allocation. Include the required quantity, delivery country, target date, and whether the tube or reel ordering option is acceptable.
How much power does the MSP430I2041TPW consume?
Power consumption depends on the supply voltage, active mode, selected low-power state, peripheral activity, and measurement conditions, so a single operating-current value would be incomplete. The Texas Instruments MSP430I2041 documentation identifies five low-power modes and a 16.384 MHz maximum clock. Determine the worst-case active and sleep currents from the manufacturer electrical characteristics table using the actual system clock, ADC, timer, and I/O configuration.
Does MSP430I2041TPW meet automotive or RoHS requirements?
The MSP430I2041TPW is identified as an industrial-temperature component with an operating range of -40°C to +105°C, but the product information does not establish AEC-Q100 qualification or a specific RoHS declaration. Automotive, RoHS, REACH, lead-free, and halogen-free requirements should therefore be confirmed through the manufacturer’s current compliance documentation before procurement or release to production.

Technische Referenzdaten für MSP430I2041TPW – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MSP430I2041TPW when the design requires four simultaneous or multiplexed 24-bit sigma-delta measurement channels in a 28-pin TSSOP and benefits from 32 KB Flash, 2 KB RAM, two timers, and five low-power modes. Select the MSP430I2031TPW for a two-channel measurement architecture when its peripheral and pin assignments satisfy the board, reducing analog channel count by two. Select the MSP430I2021TPW for a simpler one-channel design when the additional measurement capacity of the I2041 is unnecessary. None of these family options should be treated as an automatic substitute without a pin-by-pin review, because the reduction in ADC channels can affect board wiring. A cross-brand replacement should be considered only after confirming package geometry, ADC characteristics, clocking, programming interface, memory, firmware dependencies, and lifecycle requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt MSP430I2031TPW MSP430I2021TPW
Package 28-pin TSSOP (PW) 28-pin TSSOP (PW) 28-pin TSSOP (PW)
Brand Texas Instruments Texas Instruments Texas Instruments
ADC Count 4 channels 2 channels 1 channel
ADC Resolution 24-bit sigma-delta 24-bit sigma-delta 24-bit sigma-delta
Timer Count 2 timers 2 timers 2 timers
Timer Resolution 16-bit 16-bit 16-bit
Maximum Clock Frequency 16.384 MHz 16.384 MHz 16.384 MHz
Flash Memory 32 KB 32 KB 32 KB
RAM 2 KB 2 KB 2 KB
Operating Temperature Range -40°C to +105°C -40°C to +105°C -40°C to +105°C

Wichtigste Unterscheidungsmerkmale

  • Higher analog-channel count (vs. MSP430I2031TPW)
  • Broader concurrent measurement capability (vs. MSP430I2021TPW)
  • Dedicated metering-focused mixed-signal platform (vs. MSP430I2021TPW)

Designhinweise

Route analog inputs and reference connections as short, quiet traces away from digital clock, programming, and switching-current paths. Keep the four ADC input networks close to their source components, use a continuous ground reference beneath the analog section, and follow the manufacturer’s recommended reference-decoupling arrangement. Because the MCU uses sigma-delta ADCs, input filtering and source impedance must satisfy the acquisition requirements stated in the datasheet.

Do not infer the complete pinout from the 28-pin package count or the four-ADC headline feature. The manufacturer datasheet’s PW-package pin-description table must be used to identify analog inputs, reference terminals, grounds, supply pins, clock connections, reset, and programming signals. Before replacing the MSP430I2041TPW with an I2031 or I2021, compare every connected pin because a lower ADC count can leave formerly used measurement pins unconnected.

Calculate average and peak system demand using the MSP430I2041TPW operating currents for the selected clock and low-power state, then add sensor, reference, regulator, and communications loads. Decouple the MCU supply with the capacitance and placement specified by the manufacturer, and keep sensitive reference components away from noisy supply paths. Validate sleep behavior with peripherals disabled because timer, ADC, communications, and debug activity can prevent the expected current reduction.

Use the manufacturer’s calibration sequence and reference-control procedure for accuracy-critical measurements. A 24-bit ADC resolution does not guarantee equivalent end-to-end accuracy because sensor error, analog front-end noise, reference drift, excitation stability, clock error, and PCB leakage also contribute. Store calibration coefficients and operating conditions in the 32 KB Flash budget, and confirm that production test temperatures cover the device’s -40°C to +105°C industrial range.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product information identifies an industrial-temperature mixed-signal MCU but does not provide specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm current compliance documentation with Texas Instruments before production release.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MSP430I2041TPW datasheet MSP430I2041TPW pinout MSP430I2041TPW datasheet pdf MSP430I2041TPW specifications MSP430I2041TPW equivalent MSP430I2041TPW replacement MSP430I2041TPW cross reference MSP430I2041TPW vs MSP430I2031TPW MSP430I2041TPW price MSP430I2041TPW stock Texas Instruments MSP430I2041TPW MSP430I2041 28-pin TSSOP pinout MSP430I2041 energy metering application MSP430I2041 four 24-bit ADC channels MSP430I2041TPW footprint

Verwandte Bauteile & Begriffe

Texas Instruments MSP430I2041TPW MSP430I2041 MSP430I2031TPW MSP430I2021TPW MSP430I2041TPWR 16-bit RISC mixed-signal microcontroller microcontroller embedded processor semiconductor 24-bit sigma-delta ADC analog-to-digital converter metrology energy metering industrial monitoring battery-powered measurement 16.384 MHz 32 KB Flash 2 KB RAM 16-bit timer five low-power modes 28-pin TSSOP TSSOP package family surface-mount device RoHS REACH AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen