MSP430I2041TPW - 16-Bit Mixed-Signal MCU | Texas Instruments
N.º de pieza: MSP430I2041TPW ✓ ActivoMSP430I2041TPW Descripción general
A mixed-signal microcontroller combines a digital processor with analog measurement peripherals on one integrated circuit. In the device hierarchy, the MSP430I2041TPW is a microcontroller, a mixed-signal MCU, and an energy-efficient embedded processing platform. Its sigma-delta ADC channels can acquire low-frequency analog signals, while the 16-bit RISC CPU performs control, calibration, data processing, and communication tasks without requiring separate analog and processing components.
Four 24-bit sigma-delta ADCs provide the principal measurement channels. Two 16-bit timers support timing and periodic event generation, while 32 KB Flash stores firmware and 2 KB RAM supports working data. The 16.384 MHz maximum operating frequency provides processing headroom for metrology algorithms, while five low-power modes make the device suitable for battery-operated instruments that spend substantial time between measurements.
The MSP430 architecture emphasizes efficient embedded control and low standby consumption. Its mixed-signal resources are intended for metering applications in which several analog inputs must be measured accurately and handled locally. The integrated device can consolidate functions that otherwise require separate ADCs, timers, memory, and control logic, reducing board area and simplifying firmware coordination of the measurement chain.
Typical uses include energy meters, industrial process monitors, portable instrumentation, environmental sensing, and battery-powered data loggers. Its four ADC channels are particularly useful for multi-channel sensing, while local 16-bit processing can calculate measurements before transmitting compact results to a host. The TSSOP package also supports conventional surface-mount assembly rather than requiring a large through-hole footprint.
When designing a board, pay particular attention to analog grounding, reference voltage stability, input filtering, and separation between sensitive measurement traces and switching or digital return currents. Confirm the complete 28-pin signal assignment against the manufacturer pin description table before routing the PCB, and review the recommended external-component values and calibration sequence in the manufacturer datasheet.
This page organizes the MSP430I2041TPW’s key measurements, memory configuration, application fit, and replacement considerations into an engineering-oriented guide. It also highlights where family alternatives differ in ADC count and memory so that PCB reuse decisions are based on actual peripheral requirements rather than package similarity alone.
Alternativas directas para MSP430I2041TPW — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MSP430I2041TPW (mismo factor de forma y huella) — difiere en Flash Memory, Low-Power Modes, Number of ADCs, Package, RAM.
MSP430I2031TPWR
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MSP430I2021TPW
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MSP430I2041TPW Valores máximos y características eléctricas
| CPU Architecture | 16-bit RISC |
| Frecuencia de reloj máxima | 16.384 MHz |
| Nominal Processor Frequency | 16 MHz |
| ADC Architecture | 24-bit sigma-delta |
| Number of ADCs | 4 channels |
| Number of Timers | 2 timers |
| Timer Resolution | 16-bit |
| Flash Memory | 32 KB |
| RAM | 2 KB |
| Low-Power Modes | 5 modes |
| Rango de temperatura de funcionamiento | -40°C to +105°C |
| Temperature Grade | Industrial |
| Encapsulado | 28-pin TSSOP (PW) |
| Número de pines | 28 pins |
| Tipo de montaje | Surface mount |
| Product Type | Mixed-signal microcontroller |
| Application Portfolio | Metrology and monitoring |
| Estado RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Guía de configuración de pines de MSP430I2041TPW 28-pin tssop (pw)
Configuración de pines para MSP430I2041TPW (encapsulado 28-pin tssop (pw)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MSP430I2041TPW.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MSP430I2041TPW es adecuado para 6 aplicacións: Smart Energy Metering, Industrial Process Monitoring, Battery-Powered Data Logger, Portable Environmental Monitor, Precision Instrumentation, Condition Monitoring Controller.
Smart Energy Metering
The MSP430I2041TPW fits smart energy metering because its four 24-bit sigma-delta ADCs can acquire several low-frequency voltage or current-derived signals while the 16-bit CPU performs local calculation. Two 16-bit timers provide timing references for measurement intervals, and the 32 KB Flash accommodates metering and communication firmware. The 16.384 MHz maximum clock supports local processing without requiring a separate host during each measurement cycle. A production design should use isolated sensing front ends, precision references, and the manufacturer’s calibration procedure rather than routing raw line voltage directly into the MCU.
Recomendado
Industrial Process Monitoring
For industrial process monitoring, the MSP430I2041TPW can combine four analog measurement channels, two 16-bit timers, and local control logic in one 28-pin TSSOP device. The four 24-bit sigma-delta converters suit slowly changing signals such as temperature, pressure, level, and analog transducer outputs. Its five low-power modes allow a monitor to wake, sample, calculate, and report while reducing energy use between updates. The industrial -40°C to +105°C rating supports controlled factory equipment, although protection, isolation, EMC filtering, and hazardous-area requirements must be handled at the board and enclosure levels.
Recomendado
Battery-Powered Data Logger
The MSP430I2041TPW is suitable for a battery-powered data logger that periodically records multiple analog measurements. Four 24-bit sigma-delta ADCs reduce the number of separate converters, while 2 KB RAM provides space for working samples and a 16-bit processor handles scaling and local filtering. The five low-power modes help separate long idle periods from measurement activity. System-level battery life still depends on sensor current, reference circuitry, regulator quiescent current, wake interval, and the transmission technology, so the complete power budget should be calculated with the selected sensor and radio rather than the MCU alone.
Recomendado
Portable Environmental Monitor
The MSP430I2041TPW supports compact environmental instruments that combine several slow sensor outputs in a battery-powered enclosure. Its four 24-bit sigma-delta ADCs can sample temperature, humidity, light, and gas-sensor interfaces with a common digital measurement architecture, while 32 KB Flash holds application and logging firmware. Two 16-bit timers can coordinate sampling and maintenance intervals, and the five low-power modes enable duty-cycled operation. Sensor-specific excitation, filtering, calibration, and compensation remain external analog functions that must be designed around the ADC reference and input limits in the manufacturer datasheet.
Recomendado
Precision Instrumentation
The MSP430I2041TPW is appropriate for portable precision instruments requiring several channels and local numeric processing. Four 24-bit sigma-delta ADCs provide high-resolution acquisition, the 16.384 MHz maximum clock supports filtering and compensation, and two 16-bit timers can synchronize sampling with external test sequences. The 28-pin TSSOP package allows the mixed-signal subsystem to fit boards that also contain precision analog front ends. For laboratory-grade accuracy, follow the manufacturer’s grounding and reference recommendations, maintain clean supply paths, and treat calibration data storage and drift compensation as part of the measurement system design.
Recomendado
Condition Monitoring Controller
The MSP430I2041TPW can act as the measurement controller in condition-monitoring equipment for motors, pumps, machinery, and remote assets. Four analog channels can receive sensor signals associated with vibration envelopes, temperature, pressure, or current, while two timers establish sampling windows and periodic updates. The 16-bit processor performs local filtering and threshold logic before forwarding results, and the five low-power modes help manage energy in remotely installed equipment. The analog front end must provide appropriate anti-aliasing, protection, excitation, and isolation because the MCU’s sigma-delta inputs are intended to work with carefully conditioned analog signals.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MSP430I2041TPW — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MSP430I2031TPW | MSP430I2021TPW |
|---|---|---|---|
| Package | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| ADC Count | 4 channels | 2 channels | 1 channel |
| ADC Resolution | 24-bit sigma-delta | 24-bit sigma-delta | 24-bit sigma-delta |
| Timer Count | 2 timers | 2 timers | 2 timers |
| Timer Resolution | 16-bit | 16-bit | 16-bit |
| Maximum Clock Frequency | 16.384 MHz | 16.384 MHz | 16.384 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB |
| RAM | 2 KB | 2 KB | 2 KB |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C |
Diferenciadores clave
- Higher analog-channel count (frente a MSP430I2031TPW)
- Broader concurrent measurement capability (frente a MSP430I2021TPW)
- Dedicated metering-focused mixed-signal platform (frente a MSP430I2021TPW)
Notas de diseño
Route analog inputs and reference connections as short, quiet traces away from digital clock, programming, and switching-current paths. Keep the four ADC input networks close to their source components, use a continuous ground reference beneath the analog section, and follow the manufacturer’s recommended reference-decoupling arrangement. Because the MCU uses sigma-delta ADCs, input filtering and source impedance must satisfy the acquisition requirements stated in the datasheet.
Do not infer the complete pinout from the 28-pin package count or the four-ADC headline feature. The manufacturer datasheet’s PW-package pin-description table must be used to identify analog inputs, reference terminals, grounds, supply pins, clock connections, reset, and programming signals. Before replacing the MSP430I2041TPW with an I2031 or I2021, compare every connected pin because a lower ADC count can leave formerly used measurement pins unconnected.
Calculate average and peak system demand using the MSP430I2041TPW operating currents for the selected clock and low-power state, then add sensor, reference, regulator, and communications loads. Decouple the MCU supply with the capacitance and placement specified by the manufacturer, and keep sensitive reference components away from noisy supply paths. Validate sleep behavior with peripherals disabled because timer, ADC, communications, and debug activity can prevent the expected current reduction.
Use the manufacturer’s calibration sequence and reference-control procedure for accuracy-critical measurements. A 24-bit ADC resolution does not guarantee equivalent end-to-end accuracy because sensor error, analog front-end noise, reference drift, excitation stability, clock error, and PCB leakage also contribute. Store calibration coefficients and operating conditions in the 32 KB Flash budget, and confirm that production test temperatures cover the device’s -40°C to +105°C industrial range.
Información de cumplimiento
The product information identifies an industrial-temperature mixed-signal MCU but does not provide specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm current compliance documentation with Texas Instruments before production release.