NRF9160-SICA-B1A-R7 LTE-M/NB-IoT GPS SiP Module
Teilenummer: NRF9160-SICA-B1A-R7 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
NRF9160-SICA-B1A-R7 Übersicht
The nRF9160 is a highly integrated cellular IoT module rather than a conventional discrete transceiver. Its processor, modem, radio front end, security features, memory, and power-management functions are combined in one package, simplifying cellular product development. The module is designed for low-power single-device designs and supports cellular connectivity alongside integrated location tracking.
Key features include an Arm Cortex-M33 application processor, advanced hardware security, integrated GPS, 1 MB of Flash memory, 256 KB of RAM, and a complete cellular modem. The architecture allows embedded firmware, networking, application processing, and radio connectivity to be handled in a compact module rather than across several discrete components.
The nRF9160 supports both LTE-M and NB-IoT, including LTE Release 13 and Release 14 categories listed in the manufacturer material. This broad standards support is useful for products that must operate across different cellular deployments. The integrated RF front end and modem reduce the amount of external RF integration required compared with a discrete cellular design.
Typical applications include cellular IoT sensors, asset trackers, smart meters, industrial monitoring equipment, connected logistics devices, and GPS-enabled remote telemetry products. The integrated GPS capability is particularly useful when an application needs location data without adding a separate GPS receiver.
Designers should preserve the module’s recommended power, decoupling, antenna, and RF layout practices. Cellular designs are sensitive to grounding, antenna routing, transmission power, regulatory requirements, and power-supply stability. Review the manufacturer product specification and ordering information before finalizing PCB layout or changing the hardware revision.
This page synthesizes the verified distributor descriptions, manufacturer datasheet references, packaging information, application guidance, and drop-in cross-reference evidence for NRF9160-SICA-B1A-R7. Pricing, detailed electrical limits, pin-level data, and certification status must be confirmed against the latest manufacturer documentation and distributor records.
Drop-in-Alternativen für NRF9160-SICA-B1A-R7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
NRF9160-SICA-R7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NRF9160-SICA-B1A-R
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NRF9160-SIBA-B1A-R7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NRF9160-SIAA-B1A-R
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NRF9160-SIAA-B1A-R7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NRF9160-SICA-B1A-R
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NRF9160-SICA-B1A-R7 Spezifikationen (herstellerveröffentlicht)
| Product Type | Cellular IoT System-in-Package (SiP) module |
| Application Processor | Arm Cortex-M33 |
| Cellular Standards | 3GPP LTE Release 13 Cat-M1, Cat-NB1; Release 14 Cat-NB1, Cat-NB2 |
| RF Frequency Range | Approximately 700 MHz to 2.2 GHz |
| Integrated GPS | Yes |
| Flash Memory | 1 MB |
| RAM | 256 KB |
| Gehäuse | 127-PowerTFLGA module |
| Montageart | Surface mount |
| Power Class | Class 3 |
| Security Features | Advanced hardware security features |
| Ordering Container | R7 tape-and-reel variant indicated by ordering code |
NRF9160-SICA-B1A-R7 Schnittstellen & Anschlüsse
Für NRF9160-SICA-B1A-R7 ist keine vom Hersteller veröffentlichte Schnittstellenliste verfügbar. Details zu Anschlüssen und Headern finden Sie in der Herstellerdokumentation.
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Typische Anwendungen
NRF9160-SICA-B1A-R7 ist geeignet für 7 Anwendungs: GPS-Enabled Asset Tracking, Smart Metering, Industrial Equipment Monitoring, Connected Logistics Devices, Smart Agriculture Sensors, Remote Environmental Monitoring, Portable Connected Equipment.
GPS-Enabled Asset Tracking
NRF9160-SICA-B1A-R7 fits asset trackers that must report position over low-power cellular networks. Its integrated GPS avoids a separate receiver, while the Arm Cortex-M33 processor, 256 KB RAM, and 1 MB Flash provide resources for tracking firmware and local buffering. LTE-M and NB-IoT support gives the designer deployment flexibility, although the final battery life depends on reporting interval, GPS acquisition time, signal conditions, and antenna implementation. The RF layout and enclosure should be tested early because GPS and cellular coexistence can affect antenna placement, grounding, and radiated performance.
Empfohlen
Smart Metering
NRF9160-SICA-B1A-R7 is suitable for connected utility meters that need low-bandwidth, long-life cellular connectivity. LTE-M and NB-IoT support allow the product to select an appropriate cellular technology, while the Cortex-M33 processor can handle metering control, communications, and secure updates. The integrated module reduces the number of discrete RF and processing components needed in a compact meter design. Deployment success depends on local network coverage, carrier certification, deep-sleep behavior, battery capacity, and the meter’s measurement interface.
Empfohlen
Industrial Equipment Monitoring
NRF9160-SICA-B1A-R7 can serve as the communications engine in industrial monitoring equipment that reports alarms, operating state, and maintenance data over wide-area networks. Its integrated modem and Cortex-M33 core consolidate application processing and cellular connectivity, which is useful when board space and component count are constrained. LTE-M is appropriate for devices requiring mobility or moderate data throughput, while NB-IoT can suit low-rate, deep-coverage telemetry. The industrial enclosure should address temperature, vibration, antenna coupling, surge exposure, and power-supply transients.
Empfohlen
Connected Logistics Devices
NRF9160-SICA-B1A-R7 fits logistics devices that need location, status, and event reporting without a local Wi-Fi or wired connection. LTE-M and NB-IoT support provide cellular choices for fleet and shipment-tracking designs, while integrated GPS can identify the device’s position. The Cortex-M33 processor and integrated memory allow application logic, buffering, and communications to coexist in a compact module. Practical battery-life optimization requires adaptive reporting, GPS duty cycling, signal-quality-aware retries, and careful antenna placement inside the shipping container or vehicle.
Empfohlen
Smart Agriculture Sensors
NRF9160-SICA-B1A-R7 can be used in remote agricultural sensors that need cellular reporting from fields where Wi-Fi is unavailable. Its low-power cellular architecture supports intermittent data transmission, and the integrated Cortex-M33 processor can manage sensor sampling, configuration, and network state. LTE-M and NB-IoT options can be matched to coverage and power requirements after field testing. Because agricultural devices may operate in metal enclosures, wide temperatures, or high humidity, antenna placement, sealing, power regulation, and environmental protection require early validation.
Empfohlen
Remote Environmental Monitoring
NRF9160-SICA-B1A-R7 is appropriate for environmental monitoring stations that must transmit measurements from locations without reliable wired connectivity. Its Cortex-M33 processor, 1 MB Flash, and 256 KB RAM support embedded control and communications, while LTE-M and NB-IoT offer deployment options for low-rate cellular networks. Integrated GPS can add location context to field measurements. The final design should optimize sleep current, verify network registration behavior, and isolate sensitive sensors from cellular RF and power-supply noise. Antenna and enclosure testing is essential when the enclosure is remote, metallic, or weather-sealed.
Empfohlen
Portable Connected Equipment
NRF9160-SICA-B1A-R7 supports portable connected equipment where cellular coverage is preferred over Wi-Fi or Bluetooth. The integrated processor, cellular modem, RF front end, and GPS reduce system complexity compared with a discrete implementation. Its compact 127-PowerTFLGA module can suit portable products that need location, remote configuration, and low-rate telemetry. Power architecture is a central trade-off: mobile products should use the module’s recommended supply sequencing and low-power modes, while the enclosure and antenna must be designed around the user’s hand, body, vehicle, or equipment location.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für NRF9160-SICA-B1A-R7 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | NRF9160-SICA-R7 | NRF9160-SICA-B1A-R | NRF9160-SIBA-B1A-R7 | NRF9160-SIAA-B1A-R | NRF9160-SIAA-B1A-R7 | NRF9160-SICA-B1A-R |
|---|---|---|---|---|---|---|---|
| Package | 127-PowerTFLGA module | 127-PowerTFLGA module | 127-PowerTFLGA module | 127-PowerTFLGA module | 127-PowerTFLGA module | 127-PowerTFLGA module | 127-PowerTFLGA module |
| Brand | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor |
| Product Type | Cellular IoT System-in-Package | Cellular IoT System-in-Package | Cellular IoT System-in-Package | Cellular IoT System-in-Package | Cellular IoT System-in-Package | Cellular IoT System-in-Package | Cellular IoT System-in-Package |
| Ordering Code | NRF9160-SICA-B1A-R7 | NRF9160-SICA-R7 | NRF9160-SICA-B1A-R | NRF9160-SIBA-B1A-R7 | NRF9160-SIAA-B1A-R | NRF9160-SIAA-B1A-R7 | NRF9160-SICA-B1A-R |
Wichtigste Unterscheidungsmerkmale
- Integrated cellular, processing, and GPS functions (vs. NRF52840-QFAA-R7)
- LTE-M and NB-IoT deployment support (vs. NRF52840-QFAA-R7)
- Cortex-M33 processing with integrated cellular modem (vs. NRF9160-SICA-R7)
Designhinweise
Use Nordic Semiconductor’s current reference layout and hardware guidance for the nRF9160. Place the module’s supply connections and decoupling components according to the manufacturer recommendation, and minimize loop area around the module pins. Because the supplied verified data does not include a detailed land pattern, pin map, or capacitor table, do not infer these values from a generic 127-PowerTFLGA footprint.
Treat cellular RF and GPS routing as a high-priority layout constraint. Keep antenna paths controlled, preserve the manufacturer’s ground-reference geometry, and keep switching regulators, high-current paths, and noisy digital signals away from RF-sensitive areas. Validate the final antenna and enclosure combination because RF performance cannot be guaranteed from the module name alone.
Do not treat all nRF9160 ordering codes as automatically interchangeable. The supplied Nordic-related references discuss SICA, SIBA, and SIAA variants and mention a hardware-revision change involving a DEC0-capacitor update. Before replacing NRF9160-SICA-B1A-R7, verify PCN 134, the exact package revision, Nordic ordering information, carrier certification, firmware support, and the complete bill of materials.
Compliance-Informationen
The supplied verified results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status for the target. Compliance fields remain unknown rather than inferred.
