Texas Instruments

OPA690ID - 300MHz Wideband Op Amp | Texas Instruments

Teilenummer: OPA690ID ✓ Aktiv
±2.5 V to ±5 V Vdss 190 mA Id 8-pin SOIC Package
MOQ: 1 |

OPA690ID Übersicht

The Texas Instruments OPA690ID is a single-circuit, unity-gain-stable, wideband voltage-feedback operational amplifier with a disable function, 300 MHz gain-bandwidth product, and 1800 V/us slew rate. It operates from ±2.5 V to ±5 V in dual-supply configurations or from +2.5 V to +12 V in single-supply operation and is packaged in an 8-pin SOIC.

A wideband voltage-feedback operational amplifier is a semiconductor amplifier that uses voltage feedback to control gain and bandwidth. Unlike a current-feedback amplifier, it offers a familiar resistor-defined gain relationship and can operate at unity gain. The OPA690 belongs to the operational-amplifier hierarchy within analog signal-chain and power-management ICs, making it useful where signals must be amplified with high bandwidth, low distortion, and fast settling performance.

Key characteristics include 300 MHz small-signal bandwidth, 1800 V/us slew rate, unity-gain stability, and an output-current capability of 190 mA. Its output can swing to ±4.0 V under the cited conditions, while the disable pin supports power-control and signal-isolation schemes. The flexible supply range allows operation from a 12 V single rail or from ±5 V dual rails.

The OPA690 uses voltage-feedback architecture with an output stage designed for high current and low headroom requirements. This combination permits large-signal bandwidth and fast transient response without requiring a current-feedback amplifier. Unity-gain stability makes the device suitable for buffers, instrumentation paths, and gain stages where a conventional feedback network is preferred. Precise distortion, noise, settling-time, and input-offset values must be selected from the appropriate operating conditions in the manufacturer datasheet.

Typical applications include high-speed instrumentation, broadband signal conditioning, active filters, data-acquisition front ends, communications equipment, and test-and-measurement systems. The disable function is particularly useful when an amplifier stage must be disconnected or placed in a low-power state without removing the complete circuit from service.

When designing around the OPA690ID, maintain the required supply headroom for the selected output swing and keep feedback traces short to reduce parasitic feedback. Decoupling capacitors should be placed close to the supply pins, and the disable signal should be driven with clean logic levels that remain valid during startup and shutdown.

This product page combines the OPA690’s principal electrical characteristics, pin assignment, application guidance, and same-package alternative options with practical design guidance. It helps engineers distinguish confirmed device attributes from parameters that require direct verification against the Texas Instruments OPA690 datasheet.

Drop-in-Alternativen für OPA690ID – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

OPA692ID

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC format and 90% parameter proximity; specific bandwidth and slew-rate differences require comparison against the OPA692 datasheet.

📋 Referenzalternative (nicht im Katalog)

OPA690IDG4

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC format and 90% parameter proximity; the documented temperature range is -40 °C to +85 °C, while individual performance differences require datasheet confirmation.

📋 Referenzalternative (nicht im Katalog)

OPA690ID Grenzwerte & elektrische Eigenschaften

Amplifier Type Voltage Feedback Operational Amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 300 MHz
Slew Rate 1800 V/us
Unity-Gain Stable Yes
Disable Function Yes
Dual-Supply Operating Range ±2.5 V to ±5 V
Single-Supply Operating Range +2.5 V to +12 V
Maximaler Ausgangsstrom 190 mA
Output Voltage Swing ±4.0 V
Gehäuse 8-pin SOIC
Montageart Surface mount
Channel Count 1 channel
Input Type Voltage input
Betriebstemperatur -40 °C to +85 °C
RoHS-Status unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

OPA690ID Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected
Pin 2 -IN — Inverting input
Pin 3 +IN — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 DISABLE — Amplifier disable input
Pin 6 OUT — Amplifier output
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected

Typische Anwendungen

OPA690ID ist geeignet für 6 Anwendungs: High-Speed Instrumentation Signal Conditioning, Data-Acquisition Front Ends, Communications Signal Conditioning, Active Filtering, Test and Measurement Equipment, Power-Controlled Analog Channels.

🔧

High-Speed Instrumentation Signal Conditioning

The OPA690ID fits instrumentation paths that require broad closed-loop bandwidth and rapid signal transitions. Its 300 MHz gain-bandwidth product supports unity-gain buffering and moderate feedback gains, while the 1800 V/us slew rate helps preserve large-amplitude waveform shape. The 190 mA output-current capability provides useful drive margin for sensor interfaces, test-probe drivers, and signal-conditioning networks. Unity-gain stability also allows conventional resistor-based feedback networks to be used without selecting a current-feedback amplifier. Keep supply-decoupling capacitors close to the device and route the feedback connection directly to the amplifier output to minimize parasitic loop effects.

📡

Data-Acquisition Front Ends

OPA690ID applications in data-acquisition systems benefit from the combination of 300 MHz bandwidth and fast output response. The device can buffer sensor outputs, level-shift signals within its supported supply range, and drive downstream conversion stages without requiring a high-speed current-feedback architecture. Its unity-gain stability supports direct buffer use, and its disable input allows a measurement channel to be isolated during calibration or instrument resets. The ±4.0 V output-swing capability must be checked against the acquisition system’s input range. Layout should include short ground returns, low-loop-area feedback traces, and local supply bypassing to preserve signal integrity at high bandwidth.

🌐

Communications Signal Conditioning

The OPA690ID can condition wideband communications signals when the system requires high slew rate and a stable low-gain configuration. Its 1800 V/us slew rate reduces distortion on rapidly changing waveforms, while 300 MHz bandwidth provides substantial headroom for amplifier stages operating below the device’s upper frequency limit. A flexible operating range from ±2.5 V to ±5 V supports dual-rail analog circuitry, and single-supply operation is available for lower-complexity designs. The disable function can assist with channel gating or power-control schemes. Engineers should evaluate output swing, load current, stability, and permissible input common-mode range against the communications channel’s operating conditions.

📶

Active Filtering

OPA690ID is appropriate for active-filter stages requiring a wide open-loop bandwidth and high slew rate. A 300 MHz gain-bandwidth product leaves frequency-range margin above many signal-band filter sections, while 1800 V/us slew rate helps maintain low distortion through transitions within the passband. Unity-gain stability permits conventional voltage-feedback gain and component-selection methods. The 190 mA output-current capability can drive the next filter or measurement stage more effectively than a low-current general-purpose amplifier. Component tolerances, op-amp gain-bandwidth behavior, and output loading should be evaluated together. Place filter resistors and capacitors close to the relevant pins, and use a ground plane that does not interrupt the high-frequency return path.

🖥️

Test and Measurement Equipment

The OPA690ID supports wideband test and measurement systems where low-frequency precision amplifiers may lack sufficient slew rate or bandwidth. Its 300 MHz bandwidth and 1800 V/us slew rate make it suitable for driver, buffer, and signal-conditioning stages that handle fast transitions. The disable pin can simplify instrument state control by turning off an active path without removing the circuit from the chassis. The 190 mA output-current capability also allows the amplifier to drive moderate loading, subject to output-swing and stability checks. For bench instruments, use a compact low-inductance ground structure, place bypass capacitors at the supply pins, and verify settling behavior before interpreting time-domain measurements.

⚡

Power-Controlled Analog Channels

The OPA690ID’s disable function makes it useful in analog channels that require controlled shutdown between operating intervals. For example, a test system, communications interface, or reusable measurement module can disable the amplifier while retaining local biasing and board connections. This approach can reduce unnecessary active-circuit activity without requiring a separate analog switch at the signal input. The wideband voltage-feedback architecture still provides 300 MHz gain-bandwidth product, 1800 V/us slew rate, and unity-gain stability for active operation. The disable logic must meet the manufacturer’s input thresholds, and supply bypass capacitors should be sized to handle turn-on transients without causing excessive supply disturbance.

Zusammenfassung der empfohlenen Produkte

OPA692ID Same-package wideband amplifier option Verwendet in: High-Speed Instrumentation Signal Conditioning, Data-Acquisition Front Ends, Communications Signal Conditioning, Active Filtering, Test and Measurement Equipment, Power-Controlled Analog Channels OPA690IDG4 Same-package 8-pin SOIC option Verwendet in: High-Speed Instrumentation Signal Conditioning, Data-Acquisition Front Ends, Communications Signal Conditioning, Active Filtering, Test and Measurement Equipment, Power-Controlled Analog Channels
What is the OPA690ID?
The OPA690ID is a Texas Instruments single-channel, unity-gain-stable, wideband voltage-feedback operational amplifier with a disable function. According to the Texas Instruments OPA690 datasheet, it provides a 300 MHz gain-bandwidth product, an 1800 V/us slew rate, and operation from ±2.5 V to ±5 V in an 8-pin SOIC package.
What are the key specifications of OPA690ID that engineers should know?
The OPA690ID combines 300 MHz gain-bandwidth product, 1800 V/us slew rate, unity-gain stability, and a disable input in an 8-pin SOIC. According to the Texas Instruments OPA690 datasheet, its flexible supply range extends from +2.5 V to +12 V for single-supply use or from ±2.5 V to ±5 V for dual-supply use, with output-current capability up to 190 mA.
What is the operating voltage range of OPA690ID?
The OPA690ID operates from +2.5 V to +12 V in a single-supply configuration or from ±2.5 V to ±5 V in a dual-supply configuration. According to the Texas Instruments OPA690 datasheet, the selected rail arrangement determines the usable input and output range, so both supply pins and the output-swing limits must be checked for the intended signal.
Where can I download the OPA690ID datasheet PDF?
The official OPA690ID datasheet PDF is available from Texas Instruments at the manufacturer link on this page. According to the Texas Instruments OPA690 documentation, it describes the wideband voltage-feedback architecture, unity-gain stability, disable function, supply limits, output-current capability, output swing, electrical characteristics, and pin configuration.
Where can I find the OPA690ID pinout?
The OPA690ID uses an 8-pin SOIC configuration with two input pins, one output pin, two supply pins, one disable pin, and two no-connect positions. Use the pin-description table in the Texas Instruments OPA690 datasheet when assigning PCB nets, and treat each NC position as not connected.
Is the OPA690ID unity-gain stable?
Yes, the OPA690ID is unity-gain stable. According to the Texas Instruments OPA690 datasheet, its voltage-feedback architecture supports operation with a feedback factor of one while retaining a 300 MHz gain-bandwidth product and 1800 V/us slew rate, making it suitable for buffers and low-gain analog signal paths.
What can replace the OPA690ID?
The closest documented same-package replacement is the Texas Instruments OPA692ID, which appears in a direct OPA690ID comparison and shares the 8-pin SOIC format. It should be selected only after checking the OPA692 datasheet for bandwidth, slew rate, supply range, disable behavior, stability, and output-drive requirements.
Is OPA690ID the same as OPA692ID?
The OPA690ID and OPA692ID are related wideband voltage-feedback amplifiers, but they are not automatically identical substitutes. According to Texas Instruments product information, both belong to the OPA690 family context; verify the OPA692ID electrical limits and disable-pin behavior against the OPA690ID requirements before making a replacement.
When should I choose OPA690ID over OPA692ID?
Choose the OPA690ID when its documented 300 MHz bandwidth, 1800 V/us slew rate, output-current capability, and disable behavior satisfy the design. Select the OPA692ID instead when its manufacturer specifications provide a closer match to the required bandwidth, supply, output swing, or channel configuration; confirm both devices use the same 8-pin SOIC pinout.
Is OPA690ID suitable for high-speed signal conditioning?
The OPA690ID is suitable for many high-speed signal-conditioning tasks because it combines 300 MHz gain-bandwidth product with 1800 V/us slew rate and unity-gain stability. According to the Texas Instruments OPA690 datasheet, its 190 mA output-current capability also supports drive requirements beyond ordinary low-frequency precision-amplifier applications.
How does the OPA690ID disable function help power management?
The OPA690ID disable function allows an amplifier stage to be turned off while retaining the circuit’s physical layout. According to the Texas Instruments OPA690 datasheet, this is useful for power-sensitive signal chains, test systems, and communications equipment that need controlled shutdown or isolation without removing the entire board from operation.
What are the main design considerations for an OPA690ID circuit?
The main considerations are supply headroom, output swing, feedback stability, decoupling, and disable control. According to the Texas Instruments OPA690 datasheet, the device supports ±4.0 V output swing and flexible single- or dual-supply operation; short feedback paths, close supply decoupling, and valid logic levels on the disable pin help preserve predictable behavior.
Where can I buy OPA690ID online?
Use the Request a Quote form on this page to request OPA690ID availability, current lead time, order quantity, and package arrangements from XAIPART. This provides a direct quotation path for the exact OPA690ID MPN without relying on a generic family-level price or an ambiguous substitute listing.
What is the price of OPA690ID?
Use the Request a Quote form on this page for the current OPA690ID price and quantity breaks. Commercial terms can vary with order quantity, package form, and supply status, so the structured request provides a quotation tied to the exact 8-pin SOIC device rather than a family-level or starting-from amount.
What is the lead time for OPA690ID?
The current OPA690ID lead time should be requested through the Request a Quote form on this page. Manufacturers and distributors can change inventory, production allocation, and order schedules, so an individual confirmation is required for a production or prototype schedule tied to the exact OPA690ID ordering code.

Technische Referenzdaten für OPA690ID – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the OPA690ID when the design needs a unity-gain-stable voltage-feedback amplifier with a 300 MHz gain-bandwidth product, 1800 V/us slew rate, and 190 mA output-current capability in an 8-pin SOIC. Its disable input is valuable in test equipment, communications modules, and acquisition systems that require controlled channel shutdown. Consider the OPA692ID when its manufacturer data sheet shows a closer match for a specific bandwidth, slew-rate, supply, or output-drive requirement while retaining the same package and pin arrangement. The OPA690IDG4 is another documented 8-pin SOIC option with an operating range of -40 °C to +85 °C, but individual electrical characteristics must be confirmed before substitution. No cross-brand drop-in candidate with a fully documented package, pinout, and comparable electrical ratings was established, so do not substitute a functionally similar amplifier without a complete PCB and signal-integrity review.

Vergleich mit Alternativen

Parameter Dieses Produkt OPA692ID OPA690IDG4
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments

Wichtigste Unterscheidungsmerkmale

  • Wideband performance in an 8-pin SOIC (vs. OPA692ID)
  • High output-current capability (vs. OPA690IDG4)
  • Flexible single- and dual-supply operation (vs. OPA692ID)

Designhinweise

Place the input, output, and feedback components close to the OPA690ID, and keep the feedback trace short enough to minimize parasitic coupling. Connect the bypass capacitor directly between each supply pin and the ground plane so high-frequency return current does not share a long trace with analog signals. For dual-supply operation, provide local bypass on both V+ and V- connections. The SOIC footprint has short leads, but incorrect resistor placement can still create a large feedback loop and reduce stability margin.

Verify that the selected single- or dual-supply voltage supports the required input range and output swing. The OPA690ID supports single-supply operation up to +12 V and dual-supply operation from ±2.5 V to ±5 V, with stated output swing to ±4.0 V. The disable input must also remain within its valid logic limits. Check the disable state and startup sequence so the control signal cannot create an undefined amplifier output during power transitions.

Use the unity-gain-stable voltage-feedback architecture with conventional feedback resistors, and confirm stability with the actual source impedance, load capacitance, and resistor values. High-speed signals magnify stray capacitance and probe loading, so use short interconnects and controlled test points. When driving downstream circuitry, confirm both output-current demand and capacitive loading against the OPA690 operating limits before finalizing the buffer or gain stage.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance declarations were not confirmed for the exact OPA690ID ordering code. AEC-Q100 is not applicable because OPA690ID is an industrial catalog operational amplifier rather than an automotive-qualified variant.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

opa690id datasheet OPA690ID pinout OPA690ID datasheet pdf OPA690ID specifications OPA690ID equivalent OPA690ID replacement OPA690ID cross reference OPA690ID vs OPA692ID OPA690ID 300MHz op amp OPA690ID 8-SOIC pinout OPA690ID price OPA690ID stock

Verwandte Bauteile & Begriffe

Texas Instruments OPA690ID OPA692ID OPA690IDG4 wideband operational amplifier voltage-feedback amplifier current-feedback amplifier unity-gain stable gain-bandwidth product slew rate disable function output current output voltage swing single-supply operation dual-supply operation signal conditioning data acquisition active filtering test and measurement communications equipment 8-pin SOIC SOIC package family surface-mount package analog signal-chain IC RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen