P1010NXE5HFA - QorIQ P1 800MHz/667MHz SoC MPU | NXP
Teilenummer: P1010NXE5HFA ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $73.2 | $732,00 |
| 100 | $67.95 | $6.795,00 |
| 500 | $61.4 | $30.700,00 |
| 1.000 | $55.8 | $55.800,00 |
P1010NXE5HFA Übersicht
A QorIQ communications processor is a system-on-chip (SoC) that combines one or more Power Architecture CPU cores with integrated networking peripherals, security engines, and high-speed serial interfaces. QorIQ sits within NXP's broader Power Architecture microprocessor hierarchy, alongside the higher-tier P2/P3/P4/P5 families, and is positioned for embedded networking, industrial control, and secure edge applications where x86 solutions are over-powered and ARM Cortex-A solutions lack deterministic networking integration. The P1 sub-family targets cost- and power-sensitive designs that still require hardware-accelerated cryptography and multi-protocol gigabit connectivity.
Key features of the P1010NXE5HFA include the SEC 4.4 crypto engine (supporting DES, 3DES, AES, SHA-1/2, RSA, and Kasumi), integrated DDR3/DDR3L controller with ECC, three 10/100/1000 Mbps Enhanced Three-Speed Ethernet (eTSEC) ports, three PCIe Gen 1 controllers, two SATA 2.0 ports, two USB 2.0 with integrated PHY, an SD/MMC card controller, SPI/UART/I2C interfaces, a 32-bit local bus, and trusted boot via the on-chip secure boot ROM. The 'NX' suffix designates a single-core 32-bit variant, 'E5' designates the 800/667 MHz core frequency option with SEC 4.4, and 'HFA' designates the 425-TEPBGA industrial-temperature package.
Architecturally, the P1010NXE5HFA combines an out-of-order e500v2 core with a 32 KB I-cache and 32 KB D-cache, 256 KB L2 cache, a 32-bit DDR3/DDR3L controller with ECC supporting up to 4 GB of addressable memory, and the SEC 4.4 coprocessor. The integrated networking fabric allows simultaneous line-rate gigabit routing on multiple ports without external switching silicon, which differentiates it from discrete-CPU designs that require companion MAC/PHY chips.
Typical applications include industrial IoT gateways, secure edge routers, factory automation controllers, smart-grid substation equipment, building automation, network-attached storage (NAS) controllers, and fanless embedded appliances. The integrated SEC 4.4 engine is particularly useful for VPN termination and IPsec tunneling in small-office routers. The wide -40°C to +105°C industrial temperature range and Trusted Boot capability make it well-suited for unattended industrial deployments where physical tamper resistance is required.
When designing with this device, allocate a 4-layer PCB with a continuous ground plane under the BGA and matched-length traces for the DDR3 interface. The integrated USB-PHY simplifies board layout but requires careful impedance control; pair each differential pair with reference ground vias. The part is rated for industrial temperature operation up to +105°C junction, but thermal management via copper pours and airflow is required to stay within the SoC's thermal envelope at 1.0 GHz.
This page synthesizes NXP QorIQ P1 family context, drop-in part alternatives, and practical design notes that supplement the manufacturer datasheet.
Drop-in-Alternativen für P1010NXE5HFA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit P1010NXE5HFA (gleiche Bauform und Footprint) – abweichend in Ethernet, Mounting Type, Operating Temperature, PCIe, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
P1010NXN5DFB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
P1010NXN5FFB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
P1010NSE5KHB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
P1014NXE5HFA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
P1010NXE5HFA Grenzwerte & elektrische Eigenschaften
| Core Processor | PowerPC e500v2 |
| Number of Cores | 1 Core, 32-Bit |
| Core Frequency | 1.0 GHz (800/667 MHz option) |
| Series | QorIQ P1 |
| Co-Processors / DSP | Security; SEC 4.4 |
| RAM Controllers | DDR3, DDR3L |
| Graphics Acceleration | No |
| Ethernet | 10/100/1000 Mbps (3x eTSEC) |
| USB | USB 2.0 with PHY (2 ports) |
| SATA | SATA 2.0 (2 ports) |
| PCIe | PCIe Gen 1 (3 controllers) |
| Betriebstemperatur | -40C to +105C (Industrial) |
| Gehäuse | 425-TEPBGA (19x19 mm) |
| Montageart | Surface Mount |
| Part Status | Obsolete (per distributor listing) |
P1010NXE5HFA 425-tepbga (19x19 mm) Pinbelegungsleitfaden
Pinbelegung für P1010NXE5HFA (425-tepbga (19x19 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für P1010NXE5HFA.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
P1010NXE5HFA ist geeignet für 6 Anwendungs: Industrial IoT Gateway, Secure Edge Router / VPN Concentrator, Network-Attached Storage (NAS) Controller, Factory Automation Controller, Smart-Grid Substation Equipment, Building Automation Controller.
Industrial IoT Gateway
The P1010NXE5HFA's 1.0 GHz e500v2 core, three Gigabit Ethernet ports, and industrial -40C to +105C temperature range make it an excellent fit for ruggedized industrial IoT gateways. The SEC 4.4 hardware crypto engine accelerates IPsec, TLS, and MACsec line-rate, enabling secure VPN termination for SCADA traffic without CPU loading. Place the SoC between the WAN PHY and LAN switch fabric; pair the three eTSEC ports with industrial-grade Marvell or Broadcom PHYs. Unlike ARM Cortex-A SoCs, the e500v2 architecture delivers deterministic interrupt latency required for sub-millisecond industrial protocols such as PROFINET IRT and EtherCAT. The 4 GB DDR3L ceiling supports protocol-conversion buffers for Modbus TCP, OPC-UA, and MQTT workloads.
Empfohlen
Secure Edge Router / VPN Concentrator
The P1010NXE5HFA's SEC 4.4 engine accelerates AES, 3DES, SHA-1/2, RSA, and ECC at line rate, which is essential for branch-office VPN concentrators and small-business firewall appliances. The 800/667 MHz core option maintains gigabit throughput even when IPsec encapsulation is enabled, and the three eTSEC ports allow direct WAN/DMZ/LAN segmentation without an external switch. The Trusted Boot ROM verifies firmware signatures at power-up, satisfying Common Criteria and FIPS-140 deployment requirements. The 425-TEPBGA package supports a 4-layer PCB layout with continuous ground plane for EMI compliance in residential and SMB deployments.
Empfohlen
Network-Attached Storage (NAS) Controller
The P1010NXE5HFA integrates two SATA 2.0 ports directly, eliminating the need for an external RAID controller in single- or dual-bay SOHO NAS enclosures. The DDR3 controller with ECC protects against soft errors in long-running file-server workloads, and the USB 2.0 ports support front-panel hot-swap buttons or external backup drives. The 800 MHz core is sufficient for SMB/CIFS/NFS protocol serving at gigabit line rate with hardware-accelerated AES-XTS encryption for full-disk encryption. The industrial temperature rating allows fanless NAS designs for quiet home or office environments.
Empfohlen
Factory Automation Controller
The P1010NXE5HFA's deterministic e500v2 core, real-time capable interrupt controller, and -40C to +105C industrial temperature rating suit it for factory-floor PLCs and process controllers. The three PCIe lanes accept industrial I/O cards such as Profibus, EtherCAT, or analog-input modules, while the two SATA ports support local data logging to industrial SSDs. The SEC 4.4 engine provides authenticated boot and encrypted firmware storage for tamper-resistant deployments in OT environments. The wide operating range tolerates the elevated ambient temperatures typical of enclosed control cabinets near motor drives and welding equipment.
Empfohlen
Smart-Grid Substation Equipment
The P1010NXE5HFA's industrial temperature range, secure boot, and SEC 4.4 cryptographic acceleration make it suitable for IEC 61850 substation gateways and intelligent electronic devices (IEDs). The three Ethernet ports support PRP (Parallel Redundancy Protocol) and HSR (High-availability Seamless Redundancy) topologies required by IEC 62439, providing zero-loss failover for protection signaling. The DDR3L with ECC supports long-running phasor measurement and fault-recording workloads, while the Trusted Boot satisfies NERC CIP cybersecurity requirements. The PCIe lanes accept GPS-time-sync cards for IEEE 1588v2 precision time synchronization.
Empfohlen
Building Automation Controller
The P1010NXE5HFA's integrated peripherals (three eTSEC, two USB, SPI, I2C, UART) consolidate multiple building-automation subsystems onto a single SoC, eliminating external bridge chips. The 800 MHz core runs BACnet/IP, Modbus TCP, and KNXnet/IP gateways concurrently, while the SEC 4.4 engine encrypts tenant data for cloud upload. The industrial temperature rating supports mounting in unconditioned mechanical rooms, and the low-power 32-bit core enables fanless designs with 50,000-hour MTBF for always-on building-management duties.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für P1010NXE5HFA – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | P1010NXN5DFB | P1010NXN5FFB | P1010NSE5KHB | P1014NXE5HFA |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA (19x19 mm) | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same |
| Core Processor | PowerPC e500v2 (1 Core, 32-Bit) | PowerPC e500v2 (1 Core, 32-Bit) | PowerPC e500v2 (1 Core, 32-Bit) | PowerPC e500v2 (1 Core, 32-Bit) | PowerPC e500v2 (1 Core, 32-Bit) |
| Ethernet Ports (eTSEC) | 3x 10/100/1000 Mbps | 3x 10/100/1000 Mbps | 3x 10/100/1000 Mbps | 3x 10/100/1000 Mbps | 3x 10/100/1000 Mbps |
| PCIe Controllers | 3x PCIe Gen 1 | 3x PCIe Gen 1 | 3x PCIe Gen 1 | 3x PCIe Gen 1 | 2x PCIe Gen 1 (cost-reduced) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Wichtigste Unterscheidungsmerkmale
- Single-core 32-bit variant with full SEC 4.4 cryptographic engine (vs. P1014NXE5HFA)
- Industrial -40C to +105C temperature grade option (vs. P1010NXN5FFB)
- SEC 4.4 hardware-accelerated IPsec/TLS line-rate cryptography (vs. ARM Cortex-A SoCs (LS1012A))
Designhinweise
The 425-TEPBGA package requires a 4-layer or 6-layer PCB stackup with a continuous ground plane directly under the BGA footprint to provide a low-impedance reference for the DDR3 controller and high-speed serial interfaces. Escape routing through the inner BGA rows should use micro-via stacks (laser-drilled 0.1 mm vias) or 0.2 mm dog-bone fanout for low-cost fab houses. Matched-length routing is mandatory for the DDR3 byte lanes, PCIe transmit/receive pairs, SATA differential pairs, and USB 2.0 data pairs. Reference the NXP QorIQ P1010 Hardware Specifications document for exact trace-length tolerances.
At 1.0 GHz core frequency the P1010NXE5HFA dissipates approximately 4 to 5 W depending on workload and I/O activity. The 19x19 mm TEPBGA package has a junction-to-ambient thermal resistance around 25 C/W on a 4-layer JEDEC board, yielding a 100-125C junction-temperature rise at full load. Provide at least 1 square inch of inner copper pour directly under the package thermal balls, plus thermal relief vias on a 1.0 mm pitch. For enclosed cabinets, force-air cooling or a small heatsink is recommended when ambient exceeds 70C.
Do not assume the 'HFA' suffix designates industrial temperature without checking the QorIQ P1 hardware specifications document - the same BGA package is offered in commercial, extended, and industrial grades with different SVR/SR voltages. Always validate the boot configuration word (RCW) against the e500v2 reference manual before finalizing firmware, because an incorrect RCW can latch the device into a non-bootable state requiring JTAG recovery. The DDR3 controller requires write-leveling calibration; skipping it on first prototypes leads to intermittent memory failures at temperature extremes.
Compliance-Informationen
RoHS compliant per NXP QorIQ P1 product environmental documentation; lead-free 425-TEPBGA package. AEC-Q100 is not applicable - this is an industrial SoC, not an automotive-qualified IC. Confirm REACH, halogen-free, and conflict-minerals status directly with the supplier when purchasing obsolete stock.
