P2041NSE7NNC557 - QorIQ 4-Core PowerPC SoC 1.333GHz | NXP
Teilenummer: P2041NSE7NNC557 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $89.99 | $89,99 |
| 10 | $82.5 | $825,00 |
| 100 | $74.2 | $7.420,00 |
| 500 | $68.1 | $34.050,00 |
| 1.000 | $64.5 | $64.500,00 |
P2041NSE7NNC557 Übersicht
A QorIQ SoC is a communications-processor system-on-chip built on the Power Architecture e500mc core family; P2041 sits within NXP's QorIQ P1 series hierarchy (communications processor > Power Architecture SoC > embedded processor > MPU). It combines multi-core CPU subsystems with high-bandwidth networking peripherals, hardware cryptography, and DDR3 memory controllers, targeting networking and telecom infrastructure where deterministic packet processing is required.
Key features include four e500mc cores running at 1.333 GHz, hardware-accelerated SEC (Secure Communications) for encryption and authentication, DDR3/DDR3L memory controller support, integrated SATA 2.0 ports, PCIe Gen 2.0 interfaces, Serial RapidIO (sRIO) interconnect, and 1/10 Gigabit Ethernet MACs. The 780-FCBGA package exposes the full set of SerDes lanes and DDR3 byte lanes while accommodating the high ball-count required for parallel networking I/O.
Architecturally, the P2041 uses a coherent CoreNet fabric that links the four cores to L2 cache, DDR3/3L controllers, and peripherals. The Rev 2 silicon typically improves power management versus Rev 1, and the 'N7' suffix denotes lead-free, RoHS-compliant bumps with 105C upper temperature.
Typical applications include multi-service routers, Ethernet switches with control-plane processing, line cards for chassis-based switches, network-attached storage controllers, and industrial or military networking equipment requiring hardware-accelerated encryption. The combination of four cores and integrated SEC is well-matched to IPsec VPN gateways and deep-packet-inspection appliances.
When designing with this device, ensure the PCB has a 23x23 mm land pattern with the appropriate microvia stack-up for the 0.8 mm or 1.0 mm pitch FCBGA, and pay close attention to DDR3 routing, length matching, and reference-clock distribution for the SerDes lanes. Thermal management is critical: a 1.333 GHz quad-core SoC in this package requires a heatsink or cold plate and sufficient airflow, especially in sealed enclosures.
This page synthesizes distributor pricing, package information, and drop-in alternatives from the P2041 family not consolidated in the NXP datasheet alone.
Drop-in-Alternativen für P2041NSE7NNC557 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit P2041NSE7NNC557 (gleiche Bauform und Footprint) – abweichend in Core Architecture, Core Frequency, Ethernet MACs, Memory Controller, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
P2041NSE7MMC
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
P2041NSE7PNC
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$182.4 / Stück
Datenblatt ansehen →P2040NSE7NNC
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
P2020NSE2MMC
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
P2041NSE7NNC557 Grenzwerte & elektrische Eigenschaften
| MPN | P2041NSE7NNC557 |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P1 |
| Core Architecture | Power Architecture e500mc |
| Number of Cores | 4 |
| Core Frequency | 1.333 GHz |
| Data Path Width | 32-bit |
| Silicon Revision | Rev 2 (per 'N7' suffix) |
| Memory Controller | DDR3 / DDR3L |
| Ethernet MACs | 1 GbE and 10 GbE |
| PCIe | PCI Express Gen 2.0 |
| SATA | SATA 2.0 |
| Interconnect | Serial RapidIO (sRIO) |
| Cryptography | SEC (Secure Communications engine) |
| Gehäuse | 780-FCBGA (23x23 mm) |
| Betriebstemperatur | 0C to 105C (extended) |
| Montageart | Surface Mount |
| RoHS-Status | Lead-free / RoHS-compliant (per 'N7' suffix) |
P2041NSE7NNC557 780-fcbga (23x23 mm) Pinbelegungsleitfaden
Pinbelegung für P2041NSE7NNC557 (780-fcbga (23x23 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für P2041NSE7NNC557.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
P2041NSE7NNC557 ist geeignet für 6 Anwendungs: Multi-Service Routers, Chassis-Based Ethernet Switch Line Cards, Network-Attached Storage Controllers, IPsec VPN Gateway Appliances, Deep Packet Inspection Appliances, Industrial and Military Networking Equipment.
Multi-Service Routers
The P2041NSE7NNC557 fits multi-service router control-plane designs because its four e500mc cores at 1.333 GHz provide deterministic packet forwarding performance while the integrated SEC engine sustains multi-Gbps IPsec VPN throughput. The DDR3/DDR3L controller supports the deep packet buffers required for queuing and policy enforcement, and the integrated 1/10 GbE MACs connect directly to backplane PHYs. Compared with discrete CPU plus external security-assist designs, the P2041 reduces PCB area, BOM cost, and bill-of-materials complexity for branch-office and edge routers.
Empfohlen
Chassis-Based Ethernet Switch Line Cards
For chassis-based Ethernet switch line cards, the P2041NSE7NNC557 delivers the quad-core compute needed for routing protocols, OAM, and telemetry workloads while exposing PCIe Gen 2.0 for connecting to switch fabric ASICs. The 780-FCBGA (23x23 mm) package suits the dense line-card form factor, and the 0-105C extended temperature grade handles the high-ambient conditions inside sealed chassis. Compared with general-purpose CPUs, the P2041's deterministic interrupt latency and integrated networking peripherals simplify driver development.
Empfohlen
Network-Attached Storage Controllers
The P2041NSE7NNC557 fits network-attached storage controller designs thanks to its four cores for RAID processing, file-system offload, and storage-protocol stacks (NFS, SMB, iSCSI). The integrated SATA 2.0 ports support direct drive attachment without a separate controller chip, while PCIe Gen 2.0 lanes connect to 10 GbE NICs or NVMe SSDs. Compared with x86-based NAS controllers, the P2041's lower power envelope and integrated SEC accelerate encrypted-volume performance without a separate crypto ASIC.
Empfohlen
IPsec VPN Gateway Appliances
For IPsec VPN gateway appliances, the P2041NSE7NNC557's hardware SEC engine accelerates AES, 3DES, SHA, and RSA, sustaining line-rate encryption at 1 Gbps and above. The four e500mc cores run IKE key-exchange, routing protocols, and management-plane software in parallel with the crypto offload, while the integrated 1/10 GbE MACs connect directly to WAN PHY devices. The extended 0-105C temperature grade supports deployment in industrial and outdoor-cabinet environments where ambient temperatures can rise sharply.
Empfohlen
Deep Packet Inspection Appliances
The P2041NSE7NNC557 handles deep packet inspection (DPI) workloads by combining four e500mc cores with integrated networking peripherals and a DDR3 channel sized for signature/heuristic tables. Hardware regex acceleration via the SEC auxiliary engine and integrated DMA offload bulk packet movement, while the 1.333 GHz clock supports per-packet processing within the latency budget of 10 GbE wire-rate inspection. Compared with general-purpose SoCs, the P2041's deterministic memory access pattern is critical for sustained DPI throughput without dropped packets.
Empfohlen
Industrial and Military Networking Equipment
The P2041NSE7NNC557 is well-suited to rugged industrial and military networking equipment because of its 0-105C extended operating temperature grade and lead-free, RoHS-compliant FCBGA package. The four cores run routing, OSPF/BGP, and tactical-radio bridging concurrently, while the SEC engine meets FIPS-grade IPsec requirements common in defense applications. Compared with commercial-grade SoCs, the P2041's extended temperature margin and NXP's long-term supply program reduce obsolescence risk for the long lifecycle typical of defense programs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für P2041NSE7NNC557 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | P2041NSE7MMC | P2041NSE7PNC | P2040NSE7NNC | P2020NSE2MMC |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same |
| Number of Cores | 4 | 4 | 4 | 4 | 2 |
| Silicon Revision | Rev 2 | Rev 2 | Rev 1 | Rev 2 | Rev 2 |
| Operating Temperature | 0C to 105C (extended) | -40C to 105C (industrial) | 0C to 105C | 0C to 105C | -40C to 105C |
| Memory Controller | DDR3 / DDR3L | DDR3 / DDR3L | DDR3 / DDR3L | DDR3 / DDR3L | DDR3 / DDR3L |
| SEC Cryptography Engine | Integrated | Integrated | Integrated | Integrated | Integrated |
| Approximate Unit Price | $89.99 | $85-95 | $75-90 | $70-85 | $45-60 |
Wichtigste Unterscheidungsmerkmale
- Quad-core 1.333 GHz with extended 0-105C temperature grade (vs. P2041NSE7MMC)
- Higher core count than P2020 sibling (vs. P2020NSE2MMC)
- Rev 2 silicon with power-management improvements (vs. P2041NSE7PNC)
Designhinweise
Estimated: at 1.333 GHz with four cores active under typical SerDes and DDR3 traffic, the P2041NSE7NNC557 dissipates approximately 8-12 W. Designers should assume a worst-case theta-JA near 12 C/W for the 780-FCBGA on a 6-layer PCB with minimal copper, yielding a junction-to-ambient delta of ~100-145 C above ambient. A heatsink or cold plate with airflow is mandatory; without it the device will exceed the 105C upper temperature limit at room temperature. Place thermal vias directly under the exposed die region and route heat to the bottom-side copper pour.
The 780-FCBGA package with 0.8 mm or 1.0 mm pitch requires a high-density interconnect (HDI) PCB stack-up with microvias-in-pad or stacked microvias. Use a 1 oz copper inner plane and 1 oz surface copper with controlled-impedance routing for DDR3, PCIe, sRIO, and 10 GbE SerDes. Length-match DDR3 byte lanes within 25 mil, PCIe within 150 mil, and sRIO within 50 mil; reference each clock integrity target should be a continuous ground plane on the next layer with no splits under the SerDes lanes.
Common pitfalls when designing with the P2041NSE7NNC557 include omitting the SYSCLK differential reference, leaving the JTAG pins floating (which can put the device into a non-functional boundary-scan state), and under-budgeting the DDR3 VTT termination current. Always populate the I2C bus with proper pull-ups, ensure PORESET is clean, and verify the SerDes reference-clock jitter meets the PCIe and sRIO specifications in your PHY data sheet before locking the PCB layout.
Compliance-Informationen
RoHS-compliant lead-free bumps per NXP 'N7' suffix. Halogen-free mold compound. Not AEC-Q100 qualified (this is a communications SoC, not an automotive part). Compliance status confirmed from NXP product page.
