BSC9132NXN7MNMB - QorIQ Qonverge BSC SoC, 2x e500 + 2x SC3850 | NXP
Teilenummer: BSC9132NXN7MNMB ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $185.56 | $185,56 |
| 10 | $175.8 | $1.758,00 |
| 100 | $162.4 | $16.240,00 |
| 500 | $149.2 | $74.600,00 |
| 1.000 | $138.9 | $138.900,00 |
BSC9132NXN7MNMB Übersicht
A QorIQ Qonverge SoC is a heterogeneous multiprocessor that fuses CPU cores, DSP cores, and dedicated hardware engines onto one chip. QorIQ sits in NXP's communications processor portfolio; Qonverge adds the DSP/accelerator fabric for Layer-1 (physical-layer) baseband work. BSC stands for Baseband SoC - the part that handles radio physical-layer processing in small-cell base stations, enterprise VoIP, and industrial control nodes.
Key features include 32-bit dual e500 PowerPC cores at 1.333 GHz, dual SC3850 StarCore DSPs at 1.2 GHz, the MAPLE-B2P baseband accelerator for LTE PHY acceleration, and dual DDR3/DDR3L memory controllers with ECC support. Integrated interfaces cover SerDes lanes for CPRI/OBSAI fronthaul, Ethernet MACs, PCIe, USB, and GPIO, allowing direct connection to RFICs and backhaul PHYs.
The architecture uses coherent SMP between the e500 cores for control-plane Linux and RTOS workloads, with the SC3850 DSP cores and MAPLE-B2P handling time-critical baseband DSP without burdening the e500 cores. Operating temperature spans -40C to +105C for industrial and outdoor small-cell deployments. The 23x23 mm FCBGA with 780 balls provides high-density I/O required for the multi-channel SerDes and memory interfaces.
Typical applications include 4G/LTE small-cell base stations (femtocells, picocells), enterprise VoIP gateways, smart grid communication nodes, and military/defense radio systems. The dual e500 cores run the L2/L3 protocol stack while the DSP and MAPLE accelerate the PHY - a common partition in modern small-cell designs.
Design with this part knowing the FCBGA requires a multi-layer PCB with controlled-impedance routing, matched-length SerDes traces, and a high-quality power-delivery network for the 1.333 GHz cores. Thermal management is critical at full load; derate maximum throughput above 95C junction temperature per the NXP datasheet.
This page synthesizes distributor pricing, drop-in alternatives, and application guidance drawn from the NXP BSC9132 datasheet, context not consolidated on a single distributor page.
Drop-in-Alternativen für BSC9132NXN7MNMB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit BSC9132NXN7MNMB (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Package, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
BSC9132NXN7NNMB
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
BSC9131NXN7MNMB
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
BSC9132NXN7MNMB-S
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
BSC9132NXN7MNMB Grenzwerte & elektrische Eigenschaften
| Part Number | BSC9132NXN7MNMB |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ Qonverge BSC |
| Core Processor | PowerPC e500 |
| Number of Cores / Bus Width | 2 Core, 32-Bit |
| CPU Speed | 1.333 GHz |
| Co-Processors / DSP | SC3850 StarCore DSP, dual 1.2 GHz; MAPLE-B2P baseband accelerator |
| RAM Controllers | DDR3, DDR3L (dual controllers, ECC support) |
| Graphics Acceleration | No |
| Ethernet | Multiple MACs (10/100/1000) |
| USB | USB 2.0 |
| PCIe | PCIe lanes (number varies by SerDes config) |
| SerDes Lanes | Multi-lane SerDes for CPRI/OBSAI fronthaul |
| Gehäuse | 780-FCBGA (23x23 mm) |
| Betriebstemperatur | -40C to +105C |
| Montageart | Surface Mount (BGA) |
| RoHS-Status | Compliant (per NXP product page) |
BSC9132NXN7MNMB 780-fcbga (23x23 mm) Pinbelegungsleitfaden
Pinbelegung für BSC9132NXN7MNMB (780-fcbga (23x23 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für BSC9132NXN7MNMB.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
BSC9132NXN7MNMB ist geeignet für 6 Anwendungs: 4G/LTE Small-Cell Base Station, Enterprise VoIP and Unified Communications Gateway, Smart Grid Communication Node, Military/Defense Tactical Radio, Industrial IoT Edge Gateway, Wireless Backhaul and Microwave Radio.
4G/LTE Small-Cell Base Station
Deploys as the primary baseband SoC for LTE femtocells, picocells, and enterprise small cells. The BSC9132NXN7MNMB's dual e500 cores handle the L2/L3 protocol stack and OAM plane running Linux, while the SC3850 DSP cores execute uplink/downlink PHY chains and the MAPLE-B2P accelerates FFT/iFFT, CRC, turbo/viterbi, and matrix operations at line rate. The integrated CPRI/OBSAI SerDes connects directly to remote radio units, eliminating an external fronthaul ASIC. Dual DDR3 controllers with ECC deliver sustained memory bandwidth for 20 MHz LTE carrier aggregation, and the -40C to +105C industrial temperature range supports outdoor street-mount deployments.
Empfohlen
Enterprise VoIP and Unified Communications Gateway
Serves as the processing heart of enterprise VoIP and unified-comms gateways with hardware-accelerated voice codecs, transcoding, and SIP signaling. The e500 cores run the call-control and SIP stack under Linux while the SC3850 DSPs handle G.711/G.722/G.729/Opus transcoding and acoustic-echo cancellation in parallel. MAPLE-B2P can be repurposed for packet processing and encryption offload. Multiple integrated Ethernet MACs support LAN-side gigabit and WAN-side routing without external switch fabric, and the PCIe link enables expansion to DSP daughter cards for higher-channel-count systems.
Empfohlen
Smart Grid Communication Node
Functions as the secure processing engine in smart grid substation and distribution automation nodes. The dual e500 cores run the IEC 61850 protocol stack and HMI logic under a real-time OS while the SC3850 DSP cores process digital-fault-recorder waveforms and phasor-measurement-unit (PMU) data. MAPLE-B2P accelerates power-line communication (PLC) PHY and CRC-intensive encryption. The wide industrial temperature range (-40C to +105C) and rugged 780-FCBGA package meet substation environmental requirements. Hardware ECC-protected DDR3 supports long-term memory integrity required for utility-grade equipment.
Empfohlen
Military/Defense Tactical Radio
Provides a SoC foundation for software-defined tactical radios in defense programs where heterogeneous compute, extended temperature operation, and COTS supply chains matter. The e500 cores run Linux and the radio control plane, SC3850 DSPs handle real-time waveform synthesis (SINCGARS, HAVE QUICK, modern wideband tactical), and MAPLE-B2P accelerates modem PHY including frequency hopping, encryption, and interleaving. Extended-reliability variants support NXP's defense screening flow. The integrated multi-lane SerDes links to ADC/DAC RFICs, simplifying radio-architecture BOM.
Empfohlen
Industrial IoT Edge Gateway
Powers industrial IoT gateways that aggregate fieldbus (Modbus, PROFINET, EtherCAT) traffic and run local analytics. The e500 cores execute Python/Java logic through an OPC-UA stack while the SC3850 DSPs and MAPLE-B2P accelerate in-bound telemetry compression, edge ML inference for predictive maintenance, and deterministic protocol bridging. Multiple Ethernet MACs with TSN support and PCIe expansion slots enable flexible network topology. The -40C to +105C junction range supports factory-floor DIN-rail enclosures and outdoor pad-mount cabinets without active cooling.
Empfohlen
Wireless Backhaul and Microwave Radio
Drives split-mount and all-outdoor microwave backhaul radios carrying Ethernet and TDM traffic between cell sites. The e500 cores handle packet classification and QoS, SC3850 DSPs run adaptive-modulation baseband processing, and MAPLE-B2P accelerates forward-error-correction (LDPC, Reed-Solomon). SerDes lanes interconnect to RF transceivers and to the dual Ethernet MACs that backhaul the link. High junction-temperature operation (105C) supports sealed outdoor-unit enclosures with solar-load thermal margins; hardware ECC on DDR3 maintains long-term data integrity in field deployments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für BSC9132NXN7MNMB – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | BSC9132NXN7NNMB | BSC9131NXN7MNMB | BSC9132NXN7MNMB-S |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors - same brand | NXP Semiconductors - same brand | NXP Semiconductors - same brand |
| Package | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same |
| CPU Cores | 2x PowerPC e500 @ 1.333 GHz | 2x PowerPC e500 (same family) | 2x PowerPC e500 (BSC9131 family) | 2x PowerPC e500 (same die) |
| DSP Cores | 2x SC3850 @ 1.2 GHz | 2x SC3850 (same family) | Reduced DSP count | 2x SC3850 (same die) |
| Baseband Accelerator | MAPLE-B2P | MAPLE-B2P (same) | MAPLE-B (previous gen) | MAPLE-B2P (same die) |
| Memory Controllers | Dual DDR3/DDR3L with ECC | Dual DDR3/DDR3L with ECC | Dual DDR3/DDR3L with ECC | Dual DDR3/DDR3L with ECC |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C (extended screening) |
| Target Applications | Small-cell, VoIP, smart grid, defense | Small-cell, VoIP, smart grid, defense | Enterprise small-cell, lighter workloads | Defense/industrial with extended screening |
Wichtigste Unterscheidungsmerkmale
- Heterogeneous e500 + SC3850 + MAPLE-B2P on one die (vs. BSC9131NXN7MNMB)
- Industrial -40C to +105C temperature grade standard (vs. BSC9132NXN7MNMB-S)
- Integrated CPRI/OBSAI SerDes fronthaul (vs. BSC9132NXN7NNMB)
Designhinweise
Estimated: at full load (dual e500 @ 1.333 GHz + dual SC3850 @ 1.2 GHz + MAPLE-B2P active), the BSC9132NXN7MNMB dissipates on the order of 5-8 W. With a typical FCBGA theta_JA in the 8-12 C/W range on a 4-layer JEDEC board, junction temperature can approach or exceed 105C without airflow. Mount on an 8+ layer PCB with thermal vias under the die and design a thermal solution that holds Tj <= 105C in worst-case small-cell enclosure (55C ambient typical for outdoor cabinet).
The 780-FCBGA at 0.8 mm pitch requires IPC-6012 Class 3 PCB fabrication, ENIG or ENEPIG surface finish, and microvia-in-pad capability. Length-match SerDes pairs within +/-5 mil to maintain CPRI/OBSAI compliance and PCIe Gen2 signal integrity. Maintain a continuous reference plane under all high-speed traces, and stitch ground vias around signal vias to control impedance. Use the NXP hardware design guide reference schematics for DDR3 termination, decoupling, and SerDes AC-coupling caps.
DDR3 interface must support fly-by topology for memory-down configurations on the 780-FCBGA; use the NXP QorIQ DDR3 wizard to set drive strength, slew rate, and RC timing. PLACE decoupling caps (10uF bulk + 100 nF + 10 nF) within 2 mm of every VDD/VSS pair on the BGA escape. Watch out for power-rail sequencing - the BSC9132 requires core voltage to ramp before I/O voltage to avoid latch-up.
Do not reuse BSC9132 default reset configuration words across hardware revisions - verify the RCW against the latest NXP errata. The MAPLE-B2P firmware must be loaded via the e500 cores at boot; plan a fallback boot image on the same NAND/NOR for field returns. Always run the NXP board-validation suites (BVS) before committing to high-volume production to catch SerDes signal-integrity, DDR3 margins, and thermal hotspots.
Compliance-Informationen
RoHS compliant per NXP lead-free package designation. AEC-Q100 not applicable (not an automotive-grade part). Lead-free and halogen-free construction confirmed via NXP product page. Sourcing through authorized NXP distributors mitigates conflict-mineral supply-chain risk.
