PCA9500BSHP - 8-Bit I/O Expander with 2-kbit EEPROM | NXP
Teilenummer: PCA9500BSHP ✓ AktivPCA9500BSHP Übersicht
An I/O expander is an interface IC that increases the number of general-purpose input/output pins available to a host controller. The PCA9500BSHP sits between an I2C or SMBus controller and external board resources, allowing a processor with limited pin capacity to monitor input states or activate indicator and control devices. In the hierarchy of electronic components, it is an interface IC, a serial bus peripheral, and a port expander.
The PCA9500BSHP combines three functions in one device: eight quasi-bidirectional GPIO lines, an I2C-bus or SMBus host interface, and 2 kbits of onboard EEPROM. Each GPIO can be assigned independently for input or output operation. This flexibility supports status monitoring, pushbutton or switch inputs, LED control, relay-control signals, and other board-level digital functions without requiring a dedicated GPIO pin on the host microcontroller.
The integrated EEPROM provides 256 bytes of nonvolatile storage because 2 kbits divided by eight equals 256 bytes. It can be used for board identification, configuration values, calibration constants, or other small records that must survive power removal. The manufacturer identifies the device as compatible with I2C and SMBus operation up to 400 kHz, supporting common embedded serial-bus systems.
PCA9500BSHP is particularly useful in embedded control and industrial equipment where a base controller needs additional digital interface lines. Typical uses include front-panel LED and switch handling, programmable relay interfaces, sensor and alarm inputs, compact automation controllers, and embedded accessory boards. NXP also identifies the device as supporting hot insertion for removable cards in backplane systems.
The 16-pin HVQFN exposed-pad package makes the device appropriate for compact surface-mount assemblies, but the exposed pad requires deliberate PCB thermal and layout design. Use the manufacturer pin-description table when assigning tracks and confirm the exact package drawing, terminal numbering, pad dimensions, and exposed-pad connection before layout release.
This page organizes the PCA9500BSHP interface, package, EEPROM, bus-rate, and application information with comparison guidance and practical integration notes. It also separates verified device functions from replacement considerations so engineers can assess PCB compatibility before approving a substitute.
Drop-in-Alternativen für PCA9500BSHP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernPCA9500BSHP Technische Daten
| Device Type | 8-bit I2C-bus and SMBus I/O expander |
| Number of I/O Pins | 8 pins |
| I/O Type | 8 quasi-bidirectional data pins |
| I/O Configuration | Independently assignable as input or output |
| Serial Bus | I2C and SMBus |
| Maximum Bus Frequency | 400 kHz |
| Maximum Supply Voltage | 3.6 V |
| On-Board EEPROM Capacity | 2 kbit |
| EEPROM Capacity in Bytes | 256 bytes |
| Gehäuse | 16-pin HVQFN exposed-pad package, 4 mm x 4 mm |
| Montageart | Surface mount |
| Shipping Form | Tape and reel |
| Hot Insertion Support | Supported for removable cards in backplane systems |
| Typical Application | Board-level status monitoring and indicator-device activation |
PCA9500BSHP 16-pin hvqfn exposed-pad package, 4 mm x 4 mm Pinbelegungsleitfaden
Pinbelegung für PCA9500BSHP (16-pin hvqfn exposed-pad package, 4 mm x 4 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für PCA9500BSHP.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PCA9500BSHP ist geeignet für 6 Anwendungs: Industrial Control Panel I/O Expansion, LED and Indicator Control, Switch and Digital Sensor Input Module, Embedded Accessory and Configuration Card, Programmable Relay and Actuator Interface, Backplane Removable Module Interface.
Industrial Control Panel I/O Expansion
The PCA9500BSHP suits industrial control panels that need more switch, alarm, or indicator lines than the host controller provides directly. Its eight quasi-bidirectional pins can be assigned independently for input or output operation, allowing the 400 kHz I2C or SMBus controller to read panel status and drive LEDs or actuator-enable signals. The integrated 2-kbit EEPROM retains 256 bytes for panel configuration or identification data, while the 16-pin HVQFN exposed-pad package supports compact surface-mount assemblies.
Empfohlen
LED and Indicator Control
The PCA9500BSHP can reduce direct host-controller pin usage in equipment containing multiple LEDs and status indicators. Each of its eight quasi-bidirectional data pins can be assigned as an output and controlled through the I2C or SMBus interface operating up to 400 kHz. The 2-kbit EEPROM can store display or equipment-status configuration, and the 16-pin HVQFN exposed-pad package allows the interface circuitry to be placed close to the indicator section of the board.
Empfohlen
Switch and Digital Sensor Input Module
The PCA9500BSHP is useful when a system must monitor multiple switches, interlocks, or digital sensor states over a shared serial bus. Its eight quasi-bidirectional pins can be configured independently as inputs, and the I2C or SMBus interface supports a 400 kHz bus rate for efficient periodic polling. The onboard 2-kbit EEPROM provides 256 bytes for device identity or calibration constants, while the compact 16-pin HVQFN package conserves board area in distributed input modules.
Empfohlen
Embedded Accessory and Configuration Card
PCA9500BSHP-based cards can add configurable digital lines without redesigning the main processor interface. The 8-bit port may monitor inputs or activate external devices, while the 2-kbit EEPROM can hold card identification and persistent configuration across power cycles. NXP identifies hot-insertion support for removable cards in backplane systems, making the interface relevant to plug-in modules that require bus communication and state retention within a compact 16-pin HVQFN footprint.
Empfohlen
Programmable Relay and Actuator Interface
The PCA9500BSHP can provide a compact output interface for relay drivers, actuator-enable circuits, and other board-level control signals. Its eight quasi-bidirectional pins can be assigned independently as outputs and managed through an I2C or SMBus controller at rates up to 400 kHz. The integrated 2-kbit EEPROM is useful for storing actuator identifiers or configuration values, and the 16-pin HVQFN exposed-pad package supports dense control boards requiring a small, surface-mount footprint.
Empfohlen
Backplane Removable Module Interface
The PCA9500BSHP fits removable backplane cards that require additional digital monitoring or control lines. NXP identifies hot-insertion support for this use case, while the I2C/SMBus interface provides communication up to 400 kHz and the eight quasi-bidirectional pins can be configured as inputs or outputs. The 2-kbit EEPROM preserves 256 bytes of module identity or setup information, making the 16-pin HVQFN device useful where board area and peripheral functionality are constrained.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PCA9500BSHP – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Brand | NXP Semiconductors |
| Package | 16-pin HVQFN exposed-pad package, 4 mm x 4 mm |
| Device Type | 8-bit I2C-bus and SMBus I/O expander |
| Number of I/O Pins | 8 pins |
| I/O Type | 8 quasi-bidirectional data pins |
| Serial Interface | I2C and SMBus |
| Maximum Bus Frequency | 400 kHz |
| Maximum Supply Voltage | 3.6 V |
| On-Board EEPROM | 2 kbit (256 bytes) |
| Special Feature | Hot insertion support for removable cards in backplane systems |
Wichtigste Unterscheidungsmerkmale
- Combines GPIO expansion with persistent configuration storage (vs. PCA9501)
- Supports eight independently assigned digital lines (vs. PCA9500BS,118)
- Suited to removable backplane cards (vs. PCA9501)
Designhinweise
Treat the HVQFN exposed pad as a mandatory thermal and electrical land feature rather than an optional copper area. Follow the NXP package drawing for pad dimensions and use the manufacturer pin-description table when assigning the 16 terminals. Place the device close to the serial-bus route and provide a continuous ground reference beneath the exposed pad where the package drawing permits it.
Design the 3.6 V maximum supply requirement into the power tree with normal tolerances, startup sequencing, and decoupling appropriate to the host board. Check the exact input-voltage range and all I/O operating limits in the NXP manufacturer datasheet before applying the device to a rail that can exceed the maximum rating. Quasi-bidirectional pins also require careful review of their electrical behavior before driving external circuitry.
Do not assume that a functionally similar PCA9500-series part is a drop-in replacement. A valid substitution must preserve the HVQFN footprint, terminal mapping, power pins, serial-bus address behavior, I/O characteristics, EEPROM access, and firmware expectations. The PCA9501 addresses different bus-sharing or interrupt requirements, so review software and schematic changes before using it in an existing PCA9500BSHP design.
Compliance-Informationen
No specific environmental or automotive compliance declarations were established for this record.