NXP Semiconductors

PCA9500BSHP - 8-Bit I/O Expander with 2-kbit EEPROM | NXP

MPN: PCA9500BSHP ✓ فعال
3.6 V Vdss 16-pin HVQFN exposed-pad package, 4 mm x 4 mm Package 400 kHz Speed 2 kbit Memory
حداقل سفارش: 1 |

PCA9500BSHP نمای کلی

NXP PCA9500BSHP is an 8-bit I2C-bus and SMBus I/O expander with an integrated 2-kbit EEPROM, a 400 kHz bus interface, and a 3.6 V supply rating. The device is offered in a 16-pin HVQFN exposed-pad package for surface-mount designs. Its eight quasi-bidirectional I/O pins can be configured independently as inputs or outputs.

An I/O expander is an interface IC that increases the number of general-purpose input/output pins available to a host controller. The PCA9500BSHP sits between an I2C or SMBus controller and external board resources, allowing a processor with limited pin capacity to monitor input states or activate indicator and control devices. In the hierarchy of electronic components, it is an interface IC, a serial bus peripheral, and a port expander.

The PCA9500BSHP combines three functions in one device: eight quasi-bidirectional GPIO lines, an I2C-bus or SMBus host interface, and 2 kbits of onboard EEPROM. Each GPIO can be assigned independently for input or output operation. This flexibility supports status monitoring, pushbutton or switch inputs, LED control, relay-control signals, and other board-level digital functions without requiring a dedicated GPIO pin on the host microcontroller.

The integrated EEPROM provides 256 bytes of nonvolatile storage because 2 kbits divided by eight equals 256 bytes. It can be used for board identification, configuration values, calibration constants, or other small records that must survive power removal. The manufacturer identifies the device as compatible with I2C and SMBus operation up to 400 kHz, supporting common embedded serial-bus systems.

PCA9500BSHP is particularly useful in embedded control and industrial equipment where a base controller needs additional digital interface lines. Typical uses include front-panel LED and switch handling, programmable relay interfaces, sensor and alarm inputs, compact automation controllers, and embedded accessory boards. NXP also identifies the device as supporting hot insertion for removable cards in backplane systems.

The 16-pin HVQFN exposed-pad package makes the device appropriate for compact surface-mount assemblies, but the exposed pad requires deliberate PCB thermal and layout design. Use the manufacturer pin-description table when assigning tracks and confirm the exact package drawing, terminal numbering, pad dimensions, and exposed-pad connection before layout release.

This page organizes the PCA9500BSHP interface, package, EEPROM, bus-rate, and application information with comparison guidance and practical integration notes. It also separates verified device functions from replacement considerations so engineers can assess PCB compatibility before approving a substitute.

جایگزین‌های drop-in برای PCA9500BSHP — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

PCA9500BSHP مشخصات

Device Type 8-bit I2C-bus and SMBus I/O expander
Number of I/O Pins 8 pins
I/O Type 8 quasi-bidirectional data pins
I/O Configuration Independently assignable as input or output
Serial Bus I2C and SMBus
Maximum Bus Frequency 400 kHz
Maximum Supply Voltage 3.6 V
On-Board EEPROM Capacity 2 kbit
EEPROM Capacity in Bytes 256 bytes
بسته‌بندی 16-pin HVQFN exposed-pad package, 4 mm x 4 mm
نوع نصب Surface mount
Shipping Form Tape and reel
Hot Insertion Support Supported for removable cards in backplane systems
Typical Application Board-level status monitoring and indicator-device activation

راهنمای پیکربندی پین PCA9500BSHP 16-pin hvqfn exposed-pad package, 4 mm x 4 mm

پیکربندی پین برای PCA9500BSHP (پکیج 16-pin hvqfn exposed-pad package, 4 mm x 4 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin hvqfn exposed-pad package, 4 mm x 4 mm برای PCA9500BSHP

داده پین‌آوت تفصیلی موجود نیست برای PCA9500BSHP.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

PCA9500BSHP مناسب است برای 6 کاربردs: Industrial Control Panel I/O Expansion, LED and Indicator Control, Switch and Digital Sensor Input Module, Embedded Accessory and Configuration Card, Programmable Relay and Actuator Interface, Backplane Removable Module Interface.

🏭

Industrial Control Panel I/O Expansion

The PCA9500BSHP suits industrial control panels that need more switch, alarm, or indicator lines than the host controller provides directly. Its eight quasi-bidirectional pins can be assigned independently for input or output operation, allowing the 400 kHz I2C or SMBus controller to read panel status and drive LEDs or actuator-enable signals. The integrated 2-kbit EEPROM retains 256 bytes for panel configuration or identification data, while the 16-pin HVQFN exposed-pad package supports compact surface-mount assemblies.

💡

LED and Indicator Control

The PCA9500BSHP can reduce direct host-controller pin usage in equipment containing multiple LEDs and status indicators. Each of its eight quasi-bidirectional data pins can be assigned as an output and controlled through the I2C or SMBus interface operating up to 400 kHz. The 2-kbit EEPROM can store display or equipment-status configuration, and the 16-pin HVQFN exposed-pad package allows the interface circuitry to be placed close to the indicator section of the board.

🧩

Switch and Digital Sensor Input Module

The PCA9500BSHP is useful when a system must monitor multiple switches, interlocks, or digital sensor states over a shared serial bus. Its eight quasi-bidirectional pins can be configured independently as inputs, and the I2C or SMBus interface supports a 400 kHz bus rate for efficient periodic polling. The onboard 2-kbit EEPROM provides 256 bytes for device identity or calibration constants, while the compact 16-pin HVQFN package conserves board area in distributed input modules.

🔧

Embedded Accessory and Configuration Card

PCA9500BSHP-based cards can add configurable digital lines without redesigning the main processor interface. The 8-bit port may monitor inputs or activate external devices, while the 2-kbit EEPROM can hold card identification and persistent configuration across power cycles. NXP identifies hot-insertion support for removable cards in backplane systems, making the interface relevant to plug-in modules that require bus communication and state retention within a compact 16-pin HVQFN footprint.

⚡

Programmable Relay and Actuator Interface

The PCA9500BSHP can provide a compact output interface for relay drivers, actuator-enable circuits, and other board-level control signals. Its eight quasi-bidirectional pins can be assigned independently as outputs and managed through an I2C or SMBus controller at rates up to 400 kHz. The integrated 2-kbit EEPROM is useful for storing actuator identifiers or configuration values, and the 16-pin HVQFN exposed-pad package supports dense control boards requiring a small, surface-mount footprint.

🖥️

Backplane Removable Module Interface

The PCA9500BSHP fits removable backplane cards that require additional digital monitoring or control lines. NXP identifies hot-insertion support for this use case, while the I2C/SMBus interface provides communication up to 400 kHz and the eight quasi-bidirectional pins can be configured as inputs or outputs. The 2-kbit EEPROM preserves 256 bytes of module identity or setup information, making the 16-pin HVQFN device useful where board area and peripheral functionality are constrained.

خلاصه محصولات پیشنهادی

PCA9500BSHP NXP Semiconductors استفاده‌شده در: Industrial Control Panel I/O Expansion, LED and Indicator Control, Switch and Digital Sensor Input Module, Embedded Accessory and Configuration Card, Programmable Relay and Actuator Interface, Backplane Removable Module Interface PCA9501 Related NXP I/O expander for expanded bus and interrupt requirements استفاده‌شده در: Industrial Control Panel I/O Expansion, Switch and Digital Sensor Input Module, Embedded Accessory and Configuration Card, Backplane Removable Module Interface PCA9500BS,118 Related NXP PCA9500-series I/O expander استفاده‌شده در: LED and Indicator Control, Programmable Relay and Actuator Interface
What is the PCA9500BSHP?
The PCA9500BSHP is an 8-bit I2C-bus and SMBus I/O expander with an integrated 2-kbit EEPROM from NXP Semiconductors. According to the NXP manufacturer datasheet, its eight quasi-bidirectional data pins can be assigned independently as inputs or outputs, while the EEPROM provides 256 bytes of nonvolatile storage. The device operates with an I2C or SMBus interface up to 400 kHz and is packaged in a 16-pin HVQFN exposed-pad package.
How many GPIOs does the PCA9500BSHP provide?
The PCA9500BSHP provides eight general-purpose I/O pins in addition to its serial-bus interface and onboard EEPROM. According to the NXP manufacturer datasheet, the eight pins are quasi-bidirectional and can be independently assigned as inputs or outputs. They can therefore be used to monitor board-level status, read switch states, or activate indicator devices such as LEDs without consuming dedicated GPIO resources on the host controller.
How much EEPROM does the PCA9500BSHP contain?
The PCA9500BSHP contains 2 kbits, or 256 bytes, of onboard EEPROM. The NXP manufacturer datasheet identifies the device as an 8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM. This nonvolatile area can retain small configuration records, board identifiers, calibration constants, or other values that must remain available after the supply voltage is removed and restored.
What is the maximum I2C or SMBus frequency of the PCA9500BSHP?
The PCA9500BSHP supports serial-bus operation up to 400 kHz. The manufacturer datasheet and distributor specifications identify the device as an I2C/SMBus GPIO expander with a 400 kHz interface. When designing the bus, confirm that the host controller, pull-up network, wiring length, capacitance, and embedded software timing all support the intended operating frequency.
What package does the PCA9500BSHP use?
The PCA9500BSHP uses a 16-pin HVQFN exposed-pad package measuring 4 mm by 4 mm. Distributor specifications identify the device as a 16-HVQFN with an exposed pad, while the manufacturer product page identifies the PCA9500BS family as an HVQFN16 package. Use the package drawing and pin-description table in the NXP datasheet for terminal numbering, exposed-pad treatment, land patterns, and soldering details.
Where can I download the PCA9500BSHP datasheet PDF?
The official NXP PCA9500 datasheet PDF is available at https://www.nxp.com/docs/en/data-sheet/PCA9500.pdf. It is the primary document for the device function, electrical characteristics, register behavior, pin descriptions, and application guidance. For the exact PCA9500BSHP ordering code, confirm the package, temperature, and shipping-option suffix against the manufacturer product information before releasing the BOM.
Where can I find the PCA9500BSHP pinout?
The PCA9500BSHP pinout is defined by the pin-description table and package drawing in the NXP PCA9500 manufacturer datasheet. The verified package information identifies a 16-pin HVQFN exposed-pad arrangement, but a terminal-by-terminal pin list was not available for this record. Use the manufacturer diagram when assigning PCB nets so that power, ground, serial-bus, EEPROM, and I/O terminals are assigned exactly as specified.
Where can I buy PCA9500BSHP and what is its price?
Use the Request a Quote form on this page to ask about PCA9500BSHP price, stock, lead time, and order quantity. The form routes the request through XAIPART rather than relying on a static price that may become stale. For complete purchasing information, identify the required package suffix, temperature grade, and reel or tray packaging before requesting a quotation.
Is PCA9500BSHP in stock and what is its lead time?
Current PCA9500BSHP inventory and lead time should be confirmed through the Request a Quote form on this page. Stock status can change independently of technical specifications, so do not base production scheduling on a generic catalog listing. Include your required quantity, target date, and accepted package format in the request to obtain a sourcing response appropriate for the build.
What is the minimum order quantity for PCA9500BSHP?
The minimum order quantity for PCA9500BSHP should be confirmed through the Request a Quote form on this page. The device is identified with tape-and-reel shipping in distributor records, but no minimum order quantity was established for this product record. State the planned annual usage and prototype quantity so the sourcing team can confirm manufacturing and distribution pack options.
PCA9500BSHP vs PCA9501: which one should I choose?
Choose the PCA9500BSHP when the design needs eight quasi-bidirectional I/O lines together with 2 kbits of onboard EEPROM. NXP describes the PCA9501 as a functionally similar alternative for systems requiring more devices on the same I2C-bus or an interrupt output. They should not be treated as automatic pin-compatible drop-ins; review address selection, interrupt requirements, package dimensions, and terminal assignments before substitution.
Can PCA9501 replace PCA9500BSHP?
The PCA9501 can be considered only after a full interface and footprint comparison. NXP identifies it as an alternative for systems requiring more devices on one I2C-bus or an interrupt output, but the device has different functional requirements from the PCA9500BSHP's eight I/O pins and 2-kbit EEPROM arrangement. Verify package, pinout, address behavior, electrical limits, and software register compatibility before approving it as a replacement.
What is the best drop-in replacement for PCA9500BSHP?
No drop-in replacement for PCA9500BSHP was established by the available cross-reference information. The PCA9500BS,118 comparison describes related NXP functionality, while the PCA9501 addresses different bus-sharing or interrupt requirements; neither listing by itself proves identical pin compatibility in the HVQFN package. For a PCB-level replacement, require a candidate with the same 16-pin HVQFN footprint, terminal mapping, electrical ratings, address scheme, and register behavior.
What can replace PCA9500BSHP without redesigning the PCB?
A no-redesign replacement must use the same 16-pin HVQFN 4 mm by 4 mm footprint and preserve the PCA9500BSHP pin mapping and serial-bus behavior. The available substitution searches did not identify a validated part meeting those requirements, so no drop-in alternative should be claimed. Compare the manufacturer pinout, I/O electrical characteristics, EEPROM access method, device address options, and software register map against the NXP datasheet.
What are the key specifications of PCA9500BSHP that engineers should know?
The PCA9500BSHP combines eight independently configurable quasi-bidirectional I/O pins, a 2-kbit or 256-byte EEPROM, and an I2C/SMBus interface rated up to 400 kHz. It has a 3.6 V maximum supply rating and is supplied in a 16-pin 4 mm by 4 mm HVQFN exposed-pad package. According to the NXP manufacturer datasheet, the device also supports hot insertion for removable cards used in backplane systems.

داده‌های مرجع مهندسی برای PCA9500BSHP — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose PCA9500BSHP when a design needs eight independently configurable quasi-bidirectional I/O lines, I2C or SMBus communication up to 400 kHz, and 2 kbits of persistent EEPROM in a compact 16-pin HVQFN exposed-pad package. Its eight lines can monitor switches or sensors and drive LEDs, actuator-enable signals, and other indicators, while the EEPROM can retain board identification or configuration data. NXP also identifies hot insertion as a supported use for removable backplane cards. PCA9501 should be considered when additional devices on one I2C bus or an interrupt output is more important than preserving the PCA9500BSHP configuration. Do not select a replacement solely from the shared I2C-expander category: the PCB footprint, pin mapping, device address, electrical limits, EEPROM behavior, and firmware register expectations must all match. Because no validated drop-in substitute was established, an existing PCA9500BSHP board should be requalified against the complete NXP datasheet before approving another device.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand NXP Semiconductors
Package 16-pin HVQFN exposed-pad package, 4 mm x 4 mm
Device Type 8-bit I2C-bus and SMBus I/O expander
Number of I/O Pins 8 pins
I/O Type 8 quasi-bidirectional data pins
Serial Interface I2C and SMBus
Maximum Bus Frequency 400 kHz
Maximum Supply Voltage 3.6 V
On-Board EEPROM 2 kbit (256 bytes)
Special Feature Hot insertion support for removable cards in backplane systems

تفاوت‌های کلیدی

  • Combines GPIO expansion with persistent configuration storage (در مقابلPCA9501)
  • Supports eight independently assigned digital lines (در مقابلPCA9500BS,118)
  • Suited to removable backplane cards (در مقابلPCA9501)

یادداشت‌های طراحی

Treat the HVQFN exposed pad as a mandatory thermal and electrical land feature rather than an optional copper area. Follow the NXP package drawing for pad dimensions and use the manufacturer pin-description table when assigning the 16 terminals. Place the device close to the serial-bus route and provide a continuous ground reference beneath the exposed pad where the package drawing permits it.

Design the 3.6 V maximum supply requirement into the power tree with normal tolerances, startup sequencing, and decoupling appropriate to the host board. Check the exact input-voltage range and all I/O operating limits in the NXP manufacturer datasheet before applying the device to a rail that can exceed the maximum rating. Quasi-bidirectional pins also require careful review of their electrical behavior before driving external circuitry.

Do not assume that a functionally similar PCA9500-series part is a drop-in replacement. A valid substitution must preserve the HVQFN footprint, terminal mapping, power pins, serial-bus address behavior, I/O characteristics, EEPROM access, and firmware expectations. The PCA9501 addresses different bus-sharing or interrupt requirements, so review software and schematic changes before using it in an existing PCA9500BSHP design.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific environmental or automotive compliance declarations were established for this record.

جستجوهای مرتبط

PCA9500BSHP datasheet PCA9500BSHP datasheet pdf PCA9500BSHP pinout PCA9500BSHP equivalent PCA9500BSHP replacement PCA9500BSHP cross reference PCA9500BSHP application circuit PCA9500BSHP footprint NXP PCA9500BSHP PCA9500BSHP HVQFN-16 PCA9500BSHP 400 kHz PCA9500BSHP price PCA9500BSHP stock

قطعات و اصطلاحات مرتبط

NXP Semiconductors PCA9500BSHP PCA9500BS PCA9500BS,118 PCA9501 PCA9555BSHP I/O expander interface IC GPIO quasi-bidirectional I/O I2C-bus SMBus EEPROM 400 kHz serial bus 3.6 V power supply 16-pin HVQFN exposed pad surface mount hot insertion backplane card LED control industrial control panel switch monitoring actuator interface
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ