Texas Instruments

PCA9517DRG4 - 2-Channel 400kHz I2C Buffer | Texas Instruments

Teilenummer: PCA9517DRG4 ✓ Aktiv
2.7 V to 5.5 V Vdss 8-pin SOIC, 0.154 in (3.90 mm) width Package 400 kHz Speed
MOQ: 1 |

PCA9517DRG4 Übersicht

The Texas Instruments PCA9517DRG4 is a 2-channel, bidirectional I2C/SMBus level-translating buffer operating up to 400 kHz in an 8-pin SOIC package. It buffers both SDA and SCL, supports a 2.7 V to 5.5 V operating supply, and can connect two I2C buses with up to 400 pF of bus capacitance each. The device is intended for voltage translation, capacitance extension, and isolation between bus segments.

A level-translating I2C buffer is an interface IC positioned within the hierarchy of I2C interface devices, bus repeaters, and semiconductor signal-conditioning components. It sits between a controller or peripheral and a remote I2C segment, reproducing each logic transition in the appropriate voltage domain. Unlike a unilateral digital buffer, the PCA9517 supports bidirectional signal flow, allowing SDA and SCL traffic to travel in either direction without changing the bus wiring.

The principal features are two independently buffered channels, a maximum signaling rate of 400 kHz, and operation from 2.7 V to 5.5 V. According to the manufacturer datasheet, the device can connect two buses having up to 400 pF of capacitance per bus, making it useful for extending a system beyond the capacitance limit of a direct controller connection. An enable input and reference-voltage structure support controlled bus-segment operation.

BiCMOS implementation combines low-voltage BiCMOS logic with bipolar circuitry, providing bidirectional level translation in an 8-pin SOIC package. The buffered architecture isolates capacitive loading on the remote side from the driving controller while preserving standard I2C behavior. The manufacturer datasheet identifies the PCA9517 as a BiCMOS integrated circuit intended for I2C bus and SMBus systems.

Typical uses include separating a main controller from a high-capacitance sensor bus, isolating noisy or slow-changing peripheral groups, and supporting mixed-voltage I2C segments. It is also appropriate when a cable-connected module requires buffering to improve signal integrity, provided the complete circuit remains within the specified capacitance, voltage, and frequency limits.

For layout, keep SCL and SCL2 routing short and maintain continuous ground return paths between the buffered sections. Place the device where both bus branches remain electrically short, and validate the remote branch for the datasheet capacitance limit rather than relying on the 400 kHz rating alone. Confirm enable-state behavior during power-up and shutdown before releasing the downstream bus.

This page organizes the PCA9517DRG4 electrical characteristics, package details, pin assignment, verified sourcing references, drop-in alternatives, and application guidance. It also highlights practical differences among same-footprint options so engineers can select a replacement without overlooking enable behavior, voltage range, or channel configuration.

Drop-in-Alternativen für PCA9517DRG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit PCA9517DRG4 (gleiche Bauform und Footprint) – abweichend in Package, Number of Channels, Bus Compatibility, Device Type, Enable Control.

Texas Instruments
Package: 8-SOIC (0.154 inch, 3.90 mm width)
Bus Compatibility: I2C bus and SMBus
Device Type: Level-translating I2C bus repeater
Vergleichen mit PCA9517DRG4 →
Texas Instruments
Package: 8-SOIC
Number of Channels: 2
Bus Compatibility: I2C and SMBus
Vergleichen mit PCA9517DRG4 →
Texas Instruments
Package: SOIC-8 (D), 3.90 mm width
Number of Channels: 2 (SDA and SCL)
Vergleichen mit PCA9517DRG4 →

PCA9517DG4

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (0.154 in, 3.90 mm width)
2 channels · I2C bus and SMBus · 400 kHz · 0.9 V · 2.7 V to 5.5 V · 2.7 V to 5.5 V · Bidirectional · 170 ns

Preis auf Anfrage

Datenblatt ansehen →

PCA9517DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (0.154 in, 3.90 mm width)
2-channel bidirectional I2C/SMBus buffer/repeater · 2 · 400 kHz · 2.7 V to 5.5 V · Down to 0.9 V · 2.7 V to 5.5 V · I2C and SMBus · Bidirectional

Preis auf Anfrage

Datenblatt ansehen →

TCA9517DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (0.154 in, 3.90 mm width)
Level-translating I2C/SMBus bus buffer (repeater) · 2 (SDA and SCL) · 0.9 V to 5.5 V · 3.0 V to 5.5 V · 400 kHz (I2C Fast Mode) · 230 ns (max) · 0.3 x VCCA · Yes, on all pins

Preis auf Anfrage

Datenblatt ansehen →

PCA9517DP

✅ Drop-In
📦 8-pin SOIC (0.154 in, 3.90 mm width)
Same 8-pin SOIC PCA9517 buffer class and 400 kHz application; manufacturer and supply-chain origin differ, with no quantified electrical delta stated

📋 Referenzalternative (nicht im Katalog)

PCA9517ADP,118

✅ Drop-In
📦 8-pin SOIC (0.154 in, 3.90 mm width)
Same PCA9517 family and 8-pin SOIC class; manufacturer and order-code suffix differ, with no quantified electrical delta stated

📋 Referenzalternative (nicht im Katalog)

PCA9517DRG4 Technische Daten

Device Type 2-channel bidirectional I2C/SMBus level-translating buffer/repeater
Number of Channels 2 channels
Maximum Bus Frequency 400 kHz
Betriebsversorgungsspannung 2.7 V to 5.5 V
Low Input Voltage 0.9 V
Buffered Bus Capacitance per Segment 400 pF
Signal Direction Bidirectional
Supported Bus I2C and SMBus
Betriebstemperaturbereich -40 °C to +85 °C
Gehäuse 8-pin SOIC, 0.154 in (3.90 mm) width
Montageart Surface mount
Terminal Count 8 terminals
Terminal Form Gull wing
Temperature Grade Industrial
Technology BiCMOS
Enable Control Enable input

PCA9517DRG4 Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 VCC — Device supply voltage
Pin 2 SCL1 — Clock input or output for bus segment 1
Pin 3 SDA1 — Serial data input or output for bus segment 1
Pin 4 GND — Ground connection
Pin 5 SCL2 — Clock input or output for bus segment 2
Pin 6 SDA2 — Serial data input or output for bus segment 2
Pin 7 EN — Buffer enable input
Pin 8 VREF — Reference voltage connection

Typische Anwendungen

PCA9517DRG4 ist geeignet für 6 Anwendungs: I2C Capacitance Extension, Mixed-Voltage I2C Translation, SMBus Segment Isolation, Sensor Bus Conditioning, Embedded System Bus Segmentation, Test and Measurement Fixture.

🌐

I2C Capacitance Extension

The PCA9517DRG4 fits between an I2C controller and a remote segment when the original bus cannot support the required capacitance. According to the Texas Instruments datasheet, the device connects two buses with up to 400 pF per segment while preserving bidirectional SDA and SCL operation at up to 400 kHz. Place the buffer near the point where the remote branch begins, keep both sides short, and place pull-up resistors on the appropriate bus sections. This arrangement isolates the controller from remote loading and can improve rise-time behavior, although the complete branch must still be checked for timing margin.

⚡

Mixed-Voltage I2C Translation

The PCA9517DRG4 can divide a mixed-voltage I2C system into logic domains because each buffered channel is bidirectional and the device operates from 2.7 V to 5.5 V. The manufacturer describes a 0.9 V low input threshold and identifies the PCA9517 as a BiCMOS level-translating buffer. It is appropriate when a 3.3 V controller must communicate with a 5 V peripheral group without exposing either side directly to the other voltage domain. The reference and enable connections must be configured according to the datasheet, and system-level rise-time behavior should be measured on the remote bus.

🏭

SMBus Segment Isolation

The PCA9517DRG4 is suited to separating an SMBus controller from a localized group of sensors or power devices. Its two bidirectional channels buffer SCL and SDA, while its 400 kHz operating class covers standard-speed I2C and common SMBus communication rates. Isolation can reduce the effect of slow edges or loading introduced by a remote cable section. The buffer does not remove all bus-timing risks, so pull-up values, cable length, peripheral capacitance, and the enable state should be validated with an oscilloscope at the far endpoint.

🧩

Sensor Bus Conditioning

The PCA9517DRG4 can condition a branch containing multiple slow-changing sensors when cable capacitance or pull-up loading makes direct controller connections unreliable. By buffering SDA and SCL at 400 kHz, it separates the controller from the remote branch and permits each side to use suitable pull-up networks. The buffered structure is particularly useful where a sensor cable creates a sizable capacitive load or where an individual device can disrupt the bus edge rate. Keep the remote side physically compact, verify the 400 pF per-bus limitation, and check that enable control does not backfeed an unpowered sensor section.

🔧

Embedded System Bus Segmentation

The PCA9517DRG4 can divide an embedded I2C topology into a short processor-side bus and a longer peripheral-side bus. The 400 kHz rate suits conventional embedded buses, while the 8-pin SOIC package simplifies routing in compact industrial and consumer controllers. Segmenting the bus limits the amount of capacitance seen directly by the controller and helps prevent one peripheral group from affecting another. Proper implementation requires separate pull-ups for each voltage domain, careful ground continuity, and verification that the enable state remains controlled during reset, sleep, and power sequencing.

📺

Test and Measurement Fixture

The PCA9517DRG4 is useful in a test fixture that separates a controller under test from a short cable or adapter board carrying I2C peripherals. The buffered SDA and SCL paths reduce the capacitance presented to the device under test and can help maintain the specified 400 kHz signaling rate across fixture interconnects. The repeater's enable input can support controlled engagement of the remote branch. For high-speed or long-cable measurements, compare edge rates at both ends of the fixture and avoid interpreting successful communication at reduced clock rates as proof that full-rate timing is compliant.

What is the PCA9517DRG4 used for?
The PCA9517DRG4 is a 2-channel bidirectional I2C/SMBus level-translating buffer that separates a controller from a remote bus segment. According to the Texas Instruments datasheet, it buffers SDA and SCL, permits two buses with up to 400 pF each to be connected, and operates at up to 400 kHz. It is useful when voltage domains differ, capacitive loading is high, or a noisy peripheral group must be isolated from the main controller.
What is the operating voltage of PCA9517DRG4?
The PCA9517DRG4 operates from 2.7 V to 5.5 V, with a listed low input threshold of 0.9 V. According to the Texas Instruments product page and datasheet, the device is a BiCMOS level translator designed for I2C and SMBus systems. Supply voltage and the input logic threshold must be evaluated together when connecting buses operated at different logic levels.
What is the maximum I2C frequency of PCA9517DRG4?
The PCA9517DRG4 supports I2C signaling up to 400 kHz. According to the Texas Instruments datasheet, it buffers both SCL and SDA in a bidirectional arrangement and can join two bus sections having up to 400 pF of capacitance each. Actual operating speed also depends on the complete bus topology, pull-up resistance, cable length, peripheral loading, and signal rise time.
Where can I download the PCA9517DRG4 datasheet PDF?
The official PCA9517 datasheet can be downloaded from the Texas Instruments literature URL listed on this page. The manufacturer document describes the 2-bit level-translating 400 kHz I2C/SMBus buffer, its 8-pin package, electrical characteristics, pin functions, and application information. Use the manufacturer copy for final pin assignments, operating limits, and design implementation.
Where can I find the PCA9517DRG4 pinout?
The PCA9517DRG4 pinout is shown in the pin-configuration and pin-functions sections of the Texas Instruments datasheet. The 8-pin SOIC provides connections for the two sides of SCL and SDA, supply, ground, enable control, and the level-translation reference arrangement. When assigning PCB tracks, use the pin-description table in the manufacturer datasheet and preserve the standard SOIC pin-1 orientation.
What are the key specifications of PCA9517DRG4 that engineers should know?
The PCA9517DRG4 is a 2-channel, bidirectional I2C/SMBus buffer with a 400 kHz maximum signaling rate, a 2.7 V to 5.5 V operating supply, and support for two 400 pF bus segments. It is packaged as an 8-pin SOIC and uses BiCMOS technology. According to the Texas Instruments datasheet, its main roles are voltage translation, capacitance extension, and isolation between I2C bus halves.
Where to buy PCA9517DRG4 online?
Use the Request a Quote form on this page to request PCA9517DRG4 availability, lot traceability, and a quotation for the exact 8-pin SOIC ordering code. The manufacturer product page identifies PCA9517 as a 2-bit, 400 kHz level-translating I2C/SMBus buffer/repeater. The order code includes TI's DRG4 tape-and-reel packaging designation, so confirm that suffix when requesting supply.
What is the price of PCA9517DRG4?
The current price of PCA9517DRG4 is best obtained through the Request a Quote form on this page because quote-based electronic-component pricing can change with quantity, availability, and packaging. Submit the exact MPN PCA9517DRG4 and the required quantity. This preserves the distinction between the standard PCA9517DR device and the DRG4 ordering suffix.
What is the lead time for PCA9517DRG4?
Request the current lead time for PCA9517DRG4 through the Request a Quote form on this page. The quantity and required delivery date should be included with the inquiry so the supplier can confirm current allocation for the 8-pin SOIC, DRG4 packaging variant. No fixed lead-time interval should be inferred from general catalog availability.
Is PCA9517DRG4 in stock?
Check current PCA9517DRG4 stock through the Request a Quote form on this page. The form should receive the exact ordering code, required quantity, and target delivery date. Because distributor inventory changes continuously and separate listings may represent different package suffixes, confirm availability only against the complete PCA9517DRG4 MPN before releasing a purchase order.
PCA9517DRG4 vs TCA9517DR - which is better for an I2C bus?
The PCA9517DRG4 and TCA9517DR are both listed as 8-pin SOIC I2C level-translating repeaters, but the TCA9517 addresses application limitations specified for the PCA9517. The PCA9517 remains appropriate when the original bus architecture and its datasheet characteristics are already validated. Select TCA9517DR when its documented improvements match the new design; otherwise retain the PCA9517 for minimal functional change.
What is the difference between PCA9517DRG4 and PCA9517DP?
PCA9517DRG4 is the Texas Instruments 8-pin SOIC ordering code, while PCA9517DP is an NXP part identified in the comparison material as an 8-pin SOIC I2C buffer. Both occupy the same general package class, but substitute qualification still requires checking pin functions, voltage thresholds, enable behavior, bus capacitance, and propagation delay. Use the individual manufacturer datasheets before approving a cross-brand change.
When should I choose PCA9517DRG4 over TCA9517DR?
Choose PCA9517DRG4 when an existing design has been validated around the PCA9517 architecture or when procurement continuity favors retaining the established Texas Instruments device. Choose TCA9517DR for a new design when its documented enhancements address the bus limitations that matter in the application. Both are presented as 8-pin SOIC devices, so package compatibility alone should not determine the final choice.
Is PCA9517DRG4 suitable for isolating a high-capacitance I2C bus?
Yes, PCA9517DRG4 is specifically suitable for connecting and isolating two I2C bus sections with up to 400 pF per bus according to the Texas Instruments datasheet. Its 400 kHz maximum rate and bidirectional SDA/SCL channels suit capacitive extension. Verify pull-up placement, cable length, peripheral timing, and the enable state to ensure that the complete remote branch meets the required rise-time margin.
What can replace PCA9517DRG4?
PCA9517DRG4 can be considered for replacement by same-package options such as PCA9517DG4, PCA9517DR, TCA9517DR, PCA9517DP, and PCA9517ADP,118, subject to detailed pin and electrical review. The listed alternatives share the 8-pin SOIC class, but package similarity alone does not prove identical behavior. Compare enable polarity, reference-voltage requirements, logic thresholds, propagation delay, and bus-capacitance limits against the original design.

Technische Referenzdaten für PCA9517DRG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose PCA9517DRG4 for an established 8-pin SOIC design that needs bidirectional SDA and SCL buffering, mixed-voltage translation, or separation of two I2C sections with as much as 400 pF per section. PCA9517DG4 and PCA9517DR are the closest same-brand ordering options when their packaging codes meet production requirements. Evaluate TCA9517DR for new designs because Texas Instruments identifies it as addressing application limitations of the PCA9517, but confirm every timing and enable requirement. PCA9517DP and PCA9517ADP,118 provide NXP sourcing alternatives in the same 8-pin SOIC class, but cross-brand approval should include direct comparison of logic thresholds, reference behavior, propagation delay, and capacitance limits. No alternative should be approved from package shape alone.

Vergleich mit Alternativen

Parameter Dieses Produkt PCA9517DG4 PCA9517DR TCA9517DR PCA9517DP PCA9517ADP,118
Package 8-pin SOIC (0.154 in, 3.90 mm width) 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments NXP Semiconductors NXP Semiconductors
Device Function 2-bit level-translating I2C/SMBus buffer/repeater PCA9517 I2C buffer/repeater PCA9517 I2C buffer/repeater I2C logic repeater PCA9517-family I2C buffer PCA9517-family I2C buffer

Wichtigste Unterscheidungsmerkmale

  • Provides bidirectional buffering for both I2C clock and data (vs. PCA9538PW)
  • Directly addresses PCA9517 application limitations (vs. TCA9517DR)
  • Supports isolated 400 pF bus sections (vs. PCA9517DP)
  • Combines level translation and capacitance extension (vs. PCA9517ADP,118)

Designhinweise

Route SCL1 and SDA1 toward the controller-side connector, and SCL2 and SDA2 toward the remote bus, while keeping both branches short and symmetrical where practical. Maintain an uninterrupted ground return between the controller and remote peripheral. Place pull-up resistors on their respective bus sections rather than concentrating both networks on the source side. This arrangement maximizes the benefit of the buffered divide and avoids adding unnecessary loop area to the I2C routing.

Check SCL and SDA rise times at the far end of each buffered segment rather than at the PCA9517DRG4 pins. The device supports up to 400 kHz and two buses with up to 400 pF each, but cable length, pull-up resistance, peripheral capacitance, and leakage determine the actual edge rate. If the remote bus is slow, reduce pull-up resistance after checking the sink-current limit, shorten the branch, or use a different buffer arrangement rather than assuming the nominal frequency rating guarantees timing compliance.

Decouple the PCA9517DRG4 supply with a local ceramic capacitor and provide a low-impedance ground connection close to pin 4. The device operates from 2.7 V to 5.5 V, and both I2C bus domains may use different logic levels, so the supply and reference arrangement must be reviewed against the datasheet. Ensure the enable and reference pins are not driven through an unsuitable impedance during reset, sleep, or power-up, because unintended bus activity can complicate system startup.

Do not treat the PCA9517 as a general-purpose logic buffer or use it to exceed the I2C specification in a system that requires more than 400 pF per segment. Likewise, do not assume that two devices can be cascaded without checking their interaction, enable state, and reference configuration. Review the manufacturer datasheet for the permitted operating combinations and confirm that any candidate replacement preserves pin functions, logic thresholds, propagation behavior, and bus-capacitance capability.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product page identifies the PCA9517 as a 2-bit level-translating 400 kHz I2C/SMBus buffer/repeater, but the available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Request current compliance documentation for the exact ordering code before using the device in a regulated production design.

Daten verifiziert am: 2026-11-19 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

PCA9517DRG4 datasheet PCA9517DRG4 pinout PCA9517DRG4 datasheet pdf PCA9517DRG4 equivalent PCA9517DRG4 replacement PCA9517DRG4 cross reference PCA9517DRG4 vs TCA9517DR PCA9517DRG4 footprint PCA9517DRG4 application circuit PCA9517 400kHz I2C buffer Texas Instruments PCA9517DRG4 PCA9517DRG4 price PCA9517DRG4 stock PCA9517 8-SOIC I2C repeater PCA9517DRG4 schematic

Verwandte Bauteile & Begriffe

Texas Instruments PCA9517DRG4 PCA9517 PCA9517DG4 PCA9517DR TCA9517DR PCA9517DP PCA9517ADP,118 I2C buffer I2C repeater level translator SMBus interface bidirectional buffer BiCMOS SDA SCL SOIC-8 surface mount semiconductor bus capacitance mixed-voltage I2C 400 kHz I2C enable control reference voltage
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen